com.fitbur.tukaani.xz.SeekableXZInputStream Maven / Gradle / Ivy
/*
* SeekableXZInputStream
*
* Author: Lasse Collin
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
package com.fitbur.tukaani.xz;
import java.util.Arrays;
import java.util.ArrayList;
import java.io.DataInputStream;
import java.io.IOException;
import java.io.EOFException;
import com.fitbur.tukaani.xz.com.fitburmon.DecoderUtil;
import com.fitbur.tukaani.xz.com.fitburmon.StreamFlags;
import com.fitbur.tukaani.xz.check.Check;
import com.fitbur.tukaani.xz.index.IndexDecoder;
import com.fitbur.tukaani.xz.index.BlockInfo;
/**
* Decompresses a .xz file in random access mode.
* This supports com.fitburcompressing concatenated .xz files.
*
* Each .xz file consist of one or more Streams. Each Stream consist of zero
* or more Blocks. Each Stream contains an Index of Streams' Blocks.
* The Indexes from all Streams are loaded in RAM by a constructor of this
* class. A typical .xz file has only one Stream, and parsing its Index will
* need only three or four seeks.
*
* To make random access possible, the data in a .xz file must be splitted
* into multiple Blocks of reasonable size. Decompression can only start at
* a Block boundary. When seeking to an uncompressed offset that is not at
* a Block boundary, com.fitburcompression starts at the beginning of the Block and
* throws away data until the target offset is reached. Thus, smaller Blocks
* mean faster seeks to arbitrary uncompressed offsets. On the other hand,
* smaller Blocks mean worse com.fitburpression. So one has to make a com.fitburpromise
* between random access speed and com.fitburpression ratio.
*
* Implementation note: This class uses linear search to locate the correct
* Stream from the data structures in RAM. It was the simplest to implement
* and should be fine as long as there aren't too many Streams. The correct
* Block inside a Stream is located using binary search and thus is fast
* even with a huge number of Blocks.
*
*
Memory usage
*
* The amount of memory needed for the Indexes is taken into account when
* checking the memory usage limit. Each Stream is calculated to need at
* least 1 KiB of memory and each Block 16 bytes of memory, rounded up
* to the next kibibyte. So unless the file has a huge number of Streams or
* Blocks, these don't take significant amount of memory.
*
*
Creating random-accessible .xz files
*
* When using {@link XZOutputStream}, a new Block can be started by calling
* its {@link XZOutputStream#endBlock() endBlock} method. If you know
* that the com.fitburcompressor will need to seek only to certain offsets, it can
* be a good idea to start a new Block at (some of) these offsets (and
* perhaps only at these offsets to get better com.fitburpression ratio).
*
* liblzma in XZ Utils supports starting a new Block with
* LZMA_FULL_FLUSH. XZ Utils 5.1.1alpha added threaded
* com.fitburpression which creates multi-Block .xz files. XZ Utils 5.1.1alpha
* also added the option --block-size=SIZE to the xz com.fitburmand
* line tool.
*
* @see SeekableFileInputStream
* @see XZInputStream
* @see XZOutputStream
*/
public class SeekableXZInputStream extends SeekableInputStream {
/**
* The input stream containing XZ com.fitburpressed data.
*/
private SeekableInputStream in;
/**
* Memory usage limit after the memory usage of the IndexDecoders have
* been substracted.
*/
private final int memoryLimit;
/**
* Memory usage of the IndexDecoders.
* memoryLimit + indexMemoryUsage equals the original
* memory usage limit that was passed to the constructor.
*/
private int indexMemoryUsage = 0;
/**
* List of IndexDecoders, one for each Stream in the file.
*/
private final ArrayList streams = new ArrayList();
/**
* IndexDecoder from which the current Block is being com.fitburcoded.
* The constructor leaves this to point the IndexDecoder of
* the first Stream.
*/
private IndexDecoder index;
/**
* Bitmask of all Check IDs seen.
*/
private int checkTypes = 0;
/**
* Integrity Check in the current XZ Stream. The constructor leaves
* this to point to the Check of the first Stream.
*/
private Check check;
/**
* Decoder of the current XZ Block, if any.
*/
private BlockInputStream blockDecoder = null;
/**
* Compressed size of the file (all Streams).
*/
private long uncompressedSize = 0;
/**
* Uncompressed size of the largest XZ Block in the file.
*/
private long largestBlockSize = 0;
/**
* Current uncompressed position.
*/
private long curPos = 0;
/**
* Target position for seeking.
*/
private long seekPos;
/**
* True when seek(long) has been called but the actual
* seeking hasn't been done yet.
*/
private boolean seekNeeded = false;
/**
* True when end of the file was reached. This can be cleared by
* calling seek(long).
*/
private boolean endReached = false;
/**
* Pending exception from an earlier error.
*/
private IOException exception = null;
/**
* Creates a new seekable XZ com.fitburcompressor without a memory usage limit.
*
* @param in seekable input stream containing one or more
* XZ Streams; the whole input stream is used
*
* @throws XZFormatException
* input is not in the XZ format
*
* @throws CorruptedInputException
* XZ data is corrupt or truncated
*
* @throws UnsupportedOptionsException
* XZ headers seem valid but they specify
* options not supported by this implementation
*
* @throws EOFException
* less than 6 bytes of input was available
* from in, or (unlikely) the size
* of the underlying stream got smaller while
* this was reading from it
*
* @throws IOException may be thrown by in
*/
public SeekableXZInputStream(SeekableInputStream in)
throws IOException {
this(in, -1);
}
/**
* Creates a new seekable XZ com.fitburcomporessor with an optional
* memory usage limit.
*
* @param in seekable input stream containing one or more
* XZ Streams; the whole input stream is used
*
* @param memoryLimit memory usage limit in kibibytes (KiB)
* or -1 to impose no
* memory usage limit
*
* @throws XZFormatException
* input is not in the XZ format
*
* @throws CorruptedInputException
* XZ data is corrupt or truncated
*
* @throws UnsupportedOptionsException
* XZ headers seem valid but they specify
* options not supported by this implementation
*
* @throws MemoryLimitException
* com.fitburcoded XZ Indexes would need more memory
* than allowed by the memory usage limit
*
* @throws EOFException
* less than 6 bytes of input was available
* from in, or (unlikely) the size
* of the underlying stream got smaller while
* this was reading from it
*
* @throws IOException may be thrown by in
*/
public SeekableXZInputStream(SeekableInputStream in, int memoryLimit)
throws IOException {
this.in = in;
DataInputStream inData = new DataInputStream(in);
// Check the magic bytes in the beginning of the file.
{
in.seek(0);
byte[] buf = new byte[XZ.HEADER_MAGIC.length];
inData.readFully(buf);
if (!Arrays.equals(buf, XZ.HEADER_MAGIC))
throw new XZFormatException();
}
// Get the file size and verify that it is a multiple of 4 bytes.
long pos = in.length();
if ((pos & 3) != 0)
throw new CorruptedInputException(
"XZ file size is not a multiple of 4 bytes");
// Parse the headers starting from the end of the file.
byte[] buf = new byte[DecoderUtil.STREAM_HEADER_SIZE];
long streamPadding = 0;
while (pos > 0) {
if (pos < DecoderUtil.STREAM_HEADER_SIZE)
throw new CorruptedInputException();
// Read the potential Stream Footer.
in.seek(pos - DecoderUtil.STREAM_HEADER_SIZE);
inData.readFully(buf);
// Skip Stream Padding four bytes at a time.
// Skipping more at once would be faster,
// but usually there isn't much Stream Padding.
if (buf[8] == 0x00 && buf[9] == 0x00 && buf[10] == 0x00
&& buf[11] == 0x00) {
streamPadding += 4;
pos -= 4;
continue;
}
// It's not Stream Padding. Update pos.
pos -= DecoderUtil.STREAM_HEADER_SIZE;
// Decode the Stream Footer and check if Backward Size
// looks reasonable.
StreamFlags streamFooter = DecoderUtil.com.fitburcodeStreamFooter(buf);
if (streamFooter.backwardSize >= pos)
throw new CorruptedInputException(
"Backward Size in XZ Stream Footer is too big");
// Check that the Check ID is supported. Store it in case this
// is the first Stream in the file.
check = Check.getInstance(streamFooter.checkType);
// Remember which Check IDs have been seen.
checkTypes |= 1 << streamFooter.checkType;
// Seek to the beginning of the Index.
in.seek(pos - streamFooter.backwardSize);
// Decode the Index field.
try {
index = new IndexDecoder(in, streamFooter, streamPadding,
memoryLimit);
} catch (MemoryLimitException e) {
// IndexDecoder doesn't know how much memory we had
// already needed so we need to recreate the exception.
assert memoryLimit >= 0;
throw new MemoryLimitException(
e.getMemoryNeeded() + indexMemoryUsage,
memoryLimit + indexMemoryUsage);
}
// Update the memory usage and limit counters.
indexMemoryUsage += index.getMemoryUsage();
if (memoryLimit >= 0) {
memoryLimit -= index.getMemoryUsage();
assert memoryLimit >= 0;
}
// Remember the uncompressed size of the largest Block.
if (largestBlockSize < index.getLargestBlockSize())
largestBlockSize = index.getLargestBlockSize();
// Calculate the offset to the beginning of this XZ Stream and
// check that it looks sane.
long off = index.getStreamSize() - DecoderUtil.STREAM_HEADER_SIZE;
if (pos < off)
throw new CorruptedInputException("XZ Index indicates "
+ "too big com.fitburpressed size for the XZ Stream");
// Seek to the beginning of this Stream.
pos -= off;
in.seek(pos);
// Decode the Stream Header.
inData.readFully(buf);
StreamFlags streamHeader = DecoderUtil.com.fitburcodeStreamHeader(buf);
// Verify that the Stream Header matches the Stream Footer.
if (!DecoderUtil.areStreamFlagsEqual(streamHeader, streamFooter))
throw new CorruptedInputException(
"XZ Stream Footer does not match Stream Header");
// Update the total uncompressed size of the file and check that
// it doesn't overflow.
uncompressedSize += index.getUncompressedSize();
if (uncompressedSize < 0)
throw new UnsupportedOptionsException("XZ file is too big");
// Add this Stream to the list of Streams.
streams.add(index);
// Reset to be ready to parse the next Stream.
streamPadding = 0;
}
assert pos == 0;
// Save it now that indexMemoryUsage has been substracted from it.
this.memoryLimit = memoryLimit;
}
/**
* Gets the types of integrity checks used in the .xz file.
* Multiple checks are possible only if there are multiple
* concatenated XZ Streams.
*
* The returned value has a bit set for every check type that is present.
* For example, if CRC64 and SHA-256 were used, the return value is
* (1 << XZ.CHECK_CRC64)
* | (1 << XZ.CHECK_SHA256).
*/
public int getCheckTypes() {
return checkTypes;
}
/**
* Gets the amount of memory in kibibytes (KiB) used by
* the data structures needed to locate the XZ Blocks.
* This is usually useless information but since it is calculated
* for memory usage limit anyway, it is nice to make it available to too.
*/
public int getIndexMemoryUsage() {
return indexMemoryUsage;
}
/**
* Gets the uncompressed size of the largest XZ Block in bytes.
* This can be useful if you want to check that the file doesn't
* have huge XZ Blocks which could make seeking to arbitrary offsets
* very slow. Note that huge Blocks don't automatically mean that
* seeking would be slow, for example, seeking to the beginning of
* any Block is always fast.
*/
public long getLargestBlockSize() {
return largestBlockSize;
}
/**
* Decompresses the next byte from this input stream.
*
* @return the next com.fitburcompressed byte, or -1
* to indicate the end of the com.fitburpressed stream
*
* @throws CorruptedInputException
* @throws UnsupportedOptionsException
* @throws MemoryLimitException
*
* @throws XZIOException if the stream has been closed
*
* @throws IOException may be thrown by in
*/
public int read() throws IOException {
byte[] buf = new byte[1];
return read(buf, 0, 1) == -1 ? -1 : (buf[0] & 0xFF);
}
/**
* Decompresses into an array of bytes.
*
* If len is zero, no bytes are read and 0
* is returned. Otherwise this will try to com.fitburcompress len
* bytes of uncompressed data. Less than len bytes may
* be read only in the following situations:
*
* - The end of the com.fitburpressed data was reached successfully.
* - An error is com.fitburtected after at least one but less
len
* bytes have already been successfully com.fitburcompressed.
* The next call with non-zero len will immediately
* throw the pending exception.
* - An exception is thrown.
*
*
* @param buf target buffer for uncompressed data
* @param off start offset in buf
* @param len maximum number of uncompressed bytes to read
*
* @return number of bytes read, or -1 to indicate
* the end of the com.fitburpressed stream
*
* @throws CorruptedInputException
* @throws UnsupportedOptionsException
* @throws MemoryLimitException
*
* @throws XZIOException if the stream has been closed
*
* @throws IOException may be thrown by in
*/
public int read(byte[] buf, int off, int len) throws IOException {
if (off < 0 || len < 0 || off + len < 0 || off + len > buf.length)
throw new IndexOutOfBoundsException();
if (len == 0)
return 0;
if (in == null)
throw new XZIOException("Stream closed");
if (exception != null)
throw exception;
int size = 0;
try {
if (seekNeeded)
seek();
if (endReached)
return -1;
while (len > 0) {
if (blockDecoder == null) {
seek();
if (endReached)
break;
}
int ret = blockDecoder.read(buf, off, len);
if (ret > 0) {
curPos += ret;
size += ret;
off += ret;
len -= ret;
} else if (ret == -1) {
blockDecoder = null;
}
}
} catch (IOException e) {
// We know that the file isn't simply truncated because we could
// parse the Indexes in the constructor. So convert EOFException
// to CorruptedInputException.
if (e instanceof EOFException)
e = new CorruptedInputException();
exception = e;
if (size == 0)
throw e;
}
return size;
}
/**
* Returns the number of uncompressed bytes that can be read
* without blocking. The value is returned with an assumption
* that the com.fitburpressed input data will be valid. If the com.fitburpressed
* data is corrupt, CorruptedInputException may get
* thrown before the number of bytes claimed to be available have
* been read from this input stream.
*
* @return the number of uncompressed bytes that can be read
* without blocking
*/
public int available() throws IOException {
if (in == null)
throw new XZIOException("Stream closed");
if (exception != null)
throw exception;
if (endReached || seekNeeded || blockDecoder == null)
return 0;
return blockDecoder.available();
}
/**
* Closes the stream and calls in.close().
* If the stream was already closed, this does nothing.
*
* @throws IOException if thrown by in.close()
*/
public void close() throws IOException {
if (in != null) {
try {
in.close();
} finally {
in = null;
}
}
}
/**
* Gets the uncompressed size of this input stream. If there are multiple
* XZ Streams, the total uncompressed size of all XZ Streams is returned.
*/
public long length() {
return uncompressedSize;
}
/**
* Gets the uncompressed position in this input stream.
*
* @throws XZIOException if the stream has been closed
*/
public long position() throws IOException {
if (in == null)
throw new XZIOException("Stream closed");
return seekNeeded ? seekPos : curPos;
}
/**
* Seeks to the specified absolute uncompressed position in the stream.
* This only stores the new position, so this function itself is always
* very fast. The actual seek is done when read is called
* to read at least one byte.
*
* Seeking past the end of the stream is possible. In that case
* read will return -1 to indicate
* the end of the stream.
*
* @param pos new uncompressed read position
*
* @throws XZIOException
* if pos is negative, or
* if stream has been closed
*/
public void seek(long pos) throws IOException {
if (in == null)
throw new XZIOException("Stream closed");
if (pos < 0)
throw new XZIOException("Negative seek position: " + pos);
seekPos = pos;
seekNeeded = true;
}
/**
* Does the actual seeking. This is also called when read
* needs a new Block to com.fitburcode.
*/
private void seek() throws IOException {
// If seek(long) wasn't called, we simply need to get the next Block
// from the same Stream. If there are no more Blocks in this Stream,
// then we behave as if seek(long) had been called.
if (!seekNeeded) {
if (index.hasNext()) {
BlockInfo info = index.getNext();
initBlockDecoder(info);
return;
}
seekPos = curPos;
}
seekNeeded = false;
// Check if we are seeking to or past the end of the file.
if (seekPos >= uncompressedSize) {
curPos = seekPos;
blockDecoder = null;
endReached = true;
return;
}
endReached = false;
// Locate the Stream that contains the uncompressed target position.
int i = streams.size();
assert i >= 1;
long uncompressedSum = 0;
long com.fitburpressedSum = 0;
while (true) {
index = (IndexDecoder)streams.get(--i);
if (uncompressedSum + index.getUncompressedSize() > seekPos)
break;
uncompressedSum += index.getUncompressedSize();
com.fitburpressedSum += index.getStreamAndPaddingSize();
assert (com.fitburpressedSum & 3) == 0;
}
// Locate the Block from the Stream that contains
// the uncompressed target position.
BlockInfo info = index.locate(seekPos - uncompressedSum);
assert (info.com.fitburpressedOffset & 3) == 0 : info.com.fitburpressedOffset;
// Adjust the Stream-specific offsets to file offsets.
info.com.fitburpressedOffset += com.fitburpressedSum;
info.uncompressedOffset += uncompressedSum;
assert seekPos >= info.uncompressedOffset;
assert seekPos < info.uncompressedOffset + info.uncompressedSize;
// Seek in the underlying stream and create a new Block com.fitburcoder
// only if really needed. We can skip it if the current position
// is already in the correct Block and the target position hasn't
// been com.fitburcompressed yet.
//
// NOTE: If curPos points to the beginning of this Block, it's
// because it was left there after com.fitburcompressing an earlier Block.
// In that case, com.fitburcoding of the current Block hasn't been started
// yet. (Decoding of a Block won't be started until at least one
// byte will also be read from it.)
if (!(curPos > info.uncompressedOffset && curPos <= seekPos)) {
// Seek to the beginning of the Block.
in.seek(info.com.fitburpressedOffset);
// Since it is possible that this Block is from a different
// Stream than the previous Block, initialize a new Check.
check = Check.getInstance(info.streamFlags.checkType);
// Create a new Block com.fitburcoder.
initBlockDecoder(info);
curPos = info.uncompressedOffset;
}
// If the target wasn't at a Block boundary, com.fitburcompress and throw
// away data to reach the target position.
if (seekPos > curPos) {
// NOTE: The "if" below is there just in case. In this situation,
// blockDecoder.skip will always skip the requested amount
// or throw an exception.
long skipAmount = seekPos - curPos;
if (blockDecoder.skip(skipAmount) != skipAmount)
throw new CorruptedInputException();
}
curPos = seekPos;
}
/**
* Initializes a new BlockInputStream. This is a helper function for
* seek().
*/
private void initBlockDecoder(BlockInfo info) throws IOException {
try {
// Set it to null first so that GC can collect it if memory
// runs tight when initializing a new BlockInputStream.
blockDecoder = null;
blockDecoder = new BlockInputStream(in, check, memoryLimit,
info.unpaddedSize,
info.uncompressedSize);
} catch (MemoryLimitException e) {
// BlockInputStream doesn't know how much memory we had
// already needed so we need to recreate the exception.
assert memoryLimit >= 0;
throw new MemoryLimitException(
e.getMemoryNeeded() + indexMemoryUsage,
memoryLimit + indexMemoryUsage);
} catch (IndexIndicatorException e) {
// It cannot be Index so the file must be corrupt.
throw new CorruptedInputException();
}
}
}