tuwien.auto.calimero.link.KNXNetworkLink Maven / Gradle / Ivy
Show all versions of calimero-core Show documentation
/*
Calimero 2 - A library for KNX network access
Copyright (c) 2006, 2018 B. Malinowsky
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Linking this library statically or dynamically with other modules is
making a combined work based on this library. Thus, the terms and
conditions of the GNU General Public License cover the whole
combination.
As a special exception, the copyright holders of this library give you
permission to link this library with independent modules to produce an
executable, regardless of the license terms of these independent
modules, and to copy and distribute the resulting executable under terms
of your choice, provided that you also meet, for each linked independent
module, the terms and conditions of the license of that module. An
independent module is a module which is not derived from or based on
this library. If you modify this library, you may extend this exception
to your version of the library, but you are not obligated to do so. If
you do not wish to do so, delete this exception statement from your
version.
*/
package tuwien.auto.calimero.link;
import tuwien.auto.calimero.KNXAddress;
import tuwien.auto.calimero.KNXTimeoutException;
import tuwien.auto.calimero.Priority;
import tuwien.auto.calimero.cemi.CEMILData;
import tuwien.auto.calimero.knxnetip.KNXnetIPConnection;
import tuwien.auto.calimero.link.medium.KNXMediumSettings;
/**
* KNX network link interface to communicate with destinations in a KNX network.
*
* A network link provides transparency of the type of connection protocol used to access a KNX network, as well as an
* abstraction of the particular physical KNX transmission medium used for communication in the KNX network, e.g., TP1.
*
* The link provides two forms of information exchange for KNX messages: one is to directly supply necessary information
* like KNX address, message priority and NSDU, the other is to use cEMI as container format.
* Before sending a message, message parts that are not present nor supplied, but which are necessary for communication,
* are added using the settings of {@link KNXMediumSettings}.
*
* A KNX network link relies on an underlying intermediate connection technology and protocol, e.g., IP and KNXnet/IP
* {@link KNXnetIPConnection}, to access KNX networks. The necessary access settings are specified at creation of a
* dedicated network link.
*
* The name returned by {@link #getName()} is used by a link as name of its log service.
*
* @author B. Malinowsky
* @see Connector
*/
public interface KNXNetworkLink extends AutoCloseable
{
/**
* Supplies medium information necessary for KNX communication.
*
* These informations are differing between KNX media and depend on the KNX network
* this link is communicating with.
* The settings medium type has to match the medium type supplied to
* the link in the first place.
* The settings object is not copied internally to allow subsequent
* changes to medium settings by the user which should take effect immediately.
*
* @param settings medium settings to use, the expected subtype is according to the
* KNX network medium
*/
void setKNXMedium(KNXMediumSettings settings);
/**
* Returns the KNX medium settings used by this network link.
*
* The returned object is a reference to the one used by this link (not a copy).
*
* @return medium settings for KNX network
*/
KNXMediumSettings getKNXMedium();
/**
* Adds the specified event listener l to receive events from this
* link.
*
* If l was already added as listener, no action is performed.
*
* @param l the listener to add
*/
void addLinkListener(NetworkLinkListener l);
/**
* Removes the specified event listener l, so it does no longer
* receive events from this link.
*
* If l was not added in the first place, no action is performed.
*
* @param l the listener to remove
*/
void removeLinkListener(NetworkLinkListener l);
/**
* Sets the hop count used as default in KNX messages.
*
* It denotes how many sub networks a message is allowed to travel.
* A message its hop count is decremented by KNX routers to limit distance and avoid
* looping. On hop count value 0, the message is discarded from the network. A hop
* count of 7 never gets decremented.
* By default, a hop count of 6 is specified.
*
*
* @param count hop count value, 0 <= value <= 7
*/
void setHopCount(int count);
/**
* Returns the hop count used as default for KNX messages.
*
*
* @return hop count as 3 Bit unsigned value with the range 0 to 7
* @see #setHopCount(int)
*/
int getHopCount();
/**
* Sends a link layer request message to the given destination.
*
* Depending on the address, the request is either point-to-point, multicast or
* broadcast. A network link implementation is allowed to interpret a dst
* parameter of null as system broadcast, or otherwise uses its default
* broadcast behavior.
*
* @param dst KNX destination address, or null
* @param p priority this KNX message is assigned to
* @param nsdu network layer service data unit
* @throws KNXTimeoutException on a timeout during send (for example, when waiting on
* service acknowledgment using a reliable transmission protocol)
* @throws KNXLinkClosedException if the link is closed
*/
void sendRequest(KNXAddress dst, Priority p, byte[] nsdu) throws KNXTimeoutException, KNXLinkClosedException;
/**
* Sends a link layer request message to the given destination, and waits for the
* corresponding link layer confirmation.
*
* Depending on the address, the request is either point-to-point, multicast or
* broadcast. A network link implementation is allowed to interpret a dst
* parameter of null as system broadcast, or otherwise uses its default
* broadcast behavior.
*
* @param dst KNX destination address, or null
* @param p priority this message is assigned to
* @param nsdu network layer service data unit
* @throws KNXTimeoutException on a timeout during send or while waiting for the
* confirmation
* @throws KNXLinkClosedException if the link is closed
*/
void sendRequestWait(KNXAddress dst, Priority p, byte[] nsdu) throws KNXTimeoutException, KNXLinkClosedException;
/**
* Sends a KNX link layer message supplied as type cEMI L-data.
*
* If the source address of msg is 0.0.0, the device address supplied
* in the medium settings is used as message source address.
*
* @param msg cEMI L-data message to send
* @param waitForCon true to wait for link layer confirmation response,
* false to not wait for the confirmation
* @throws KNXTimeoutException on a timeout during send (for example, when waiting on
* acknowledgment using a reliable transmission protocol)
* @throws KNXLinkClosedException if the link is closed
*/
void send(CEMILData msg, boolean waitForCon) throws KNXTimeoutException, KNXLinkClosedException;
/**
* Returns the name of the link, a short textual representation to identify a link.
*
* The name is unique for links with different remote endpoints, or different types of communication links. By
* default, the address/ID of the remote endpoint is used, e.g., "192.168.0.10:3671" for an IP link.
* The name is also used for the link logger; by default, use "calimero.link." +
* {@link #getName()} to retrieve the logger of this link.
*
* @return link name as string
*/
String getName();
/**
* Checks for open network link.
*
* After a call to {@link #close()} or after the underlying protocol initiated the end of the communication, this
* method always returns false.
*
* @return true if this network link is open, false if closed
*/
boolean isOpen();
/**
* Ends communication with the KNX network and closes the network link.
*
* All registered link listeners get notified.
* If no communication access was established in the first place or the link already got closed, no action is
* performed.
*/
@Override
void close();
}