com.handmark.pulltorefresh.library.IPullToRefresh Maven / Gradle / Ivy
/*******************************************************************************
* Copyright 2011, 2012 Chris Banes.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*******************************************************************************/
package com.handmark.pulltorefresh.library;
import android.view.View;
import android.view.animation.Interpolator;
import com.handmark.pulltorefresh.library.PullToRefreshBase.Mode;
import com.handmark.pulltorefresh.library.PullToRefreshBase.OnPullEventListener;
import com.handmark.pulltorefresh.library.PullToRefreshBase.OnRefreshListener;
import com.handmark.pulltorefresh.library.PullToRefreshBase.OnRefreshListener2;
import com.handmark.pulltorefresh.library.PullToRefreshBase.State;
public interface IPullToRefresh {
/**
* Demos the Pull-to-Refresh functionality to the user so that they are
* aware it is there. This could be useful when the user first opens your
* app, etc. The animation will only happen if the Refresh View (ListView,
* ScrollView, etc) is in a state where a Pull-to-Refresh could occur by a
* user's touch gesture (i.e. scrolled to the top/bottom).
*
* @return true - if the Demo has been started, false if not.
*/
public boolean demo();
/**
* Get the mode that this view is currently in. This is only really useful
* when using Mode.BOTH.
*
* @return Mode that the view is currently in
*/
public Mode getCurrentMode();
/**
* Returns whether the Touch Events are filtered or not. If true is
* returned, then the View will only use touch events where the difference
* in the Y-axis is greater than the difference in the X-axis. This means
* that the View will not interfere when it is used in a horizontal
* scrolling View (such as a ViewPager).
*
* @return boolean - true if the View is filtering Touch Events
*/
public boolean getFilterTouchEvents();
/**
* Returns a proxy object which allows you to call methods on all of the
* LoadingLayouts (the Views which show when Pulling/Refreshing).
*
* You should not keep the result of this method any longer than you need
* it.
*
* @return Object which will proxy any calls you make on it, to all of the
* LoadingLayouts.
*/
public ILoadingLayout getLoadingLayoutProxy();
/**
* Returns a proxy object which allows you to call methods on the
* LoadingLayouts (the Views which show when Pulling/Refreshing). The actual
* LoadingLayout(s) which will be affected, are chosen by the parameters you
* give.
*
* You should not keep the result of this method any longer than you need
* it.
*
* @param includeStart - Whether to include the Start/Header Views
* @param includeEnd - Whether to include the End/Footer Views
* @return Object which will proxy any calls you make on it, to the
* LoadingLayouts included.
*/
public ILoadingLayout getLoadingLayoutProxy(boolean includeStart, boolean includeEnd);
/**
* Get the mode that this view has been set to. If this returns
* Mode.BOTH, you can use getCurrentMode() to
* check which mode the view is currently in
*
* @return Mode that the view has been set to
*/
public Mode getMode();
/**
* Get the Wrapped Refreshable View. Anything returned here has already been
* added to the content view.
*
* @return The View which is currently wrapped
*/
public T getRefreshableView();
/**
* Get whether the 'Refreshing' View should be automatically shown when
* refreshing. Returns true by default.
*
* @return - true if the Refreshing View will be show
*/
public boolean getShowViewWhileRefreshing();
/**
* @return - The state that the View is currently in.
*/
public State getState();
/**
* Whether Pull-to-Refresh is enabled
*
* @return enabled
*/
public boolean isPullToRefreshEnabled();
/**
* Gets whether Overscroll support is enabled. This is different to
* Android's standard Overscroll support (the edge-glow) which is available
* from GINGERBREAD onwards
*
* @return true - if both PullToRefresh-OverScroll and Android's inbuilt
* OverScroll are enabled
*/
public boolean isPullToRefreshOverScrollEnabled();
/**
* Returns whether the Widget is currently in the Refreshing mState
*
* @return true if the Widget is currently refreshing
*/
public boolean isRefreshing();
/**
* Returns whether the widget has enabled scrolling on the Refreshable View
* while refreshing.
*
* @return true if the widget has enabled scrolling while refreshing
*/
public boolean isScrollingWhileRefreshingEnabled();
/**
* Mark the current Refresh as complete. Will Reset the UI and hide the
* Refreshing View
*/
public void onRefreshComplete();
/**
* Set the Touch Events to be filtered or not. If set to true, then the View
* will only use touch events where the difference in the Y-axis is greater
* than the difference in the X-axis. This means that the View will not
* interfere when it is used in a horizontal scrolling View (such as a
* ViewPager), but will restrict which types of finger scrolls will trigger
* the View.
*
* @param filterEvents - true if you want to filter Touch Events. Default is
* true.
*/
public void setFilterTouchEvents(boolean filterEvents);
/**
* Set the mode of Pull-to-Refresh that this view will use.
*
* @param mode - Mode to set the View to
*/
public void setMode(Mode mode);
/**
* Set OnPullEventListener for the Widget
*
* @param listener - Listener to be used when the Widget has a pull event to
* propogate.
*/
public void setOnPullEventListener(OnPullEventListener listener);
/**
* Set OnRefreshListener for the Widget
*
* @param listener - Listener to be used when the Widget is set to Refresh
*/
public void setOnRefreshListener(OnRefreshListener listener);
/**
* Set OnRefreshListener for the Widget
*
* @param listener - Listener to be used when the Widget is set to Refresh
*/
public void setOnRefreshListener(OnRefreshListener2 listener);
/**
* Sets whether Overscroll support is enabled. This is different to
* Android's standard Overscroll support (the edge-glow). This setting only
* takes effect when running on device with Android v2.3 or greater.
*
* @param enabled - true if you want Overscroll enabled
*/
public void setPullToRefreshOverScrollEnabled(boolean enabled);
/**
* Sets the Widget to be in the refresh state. The UI will be updated to
* show the 'Refreshing' view, and be scrolled to show such.
*/
public void setRefreshing();
/**
* Sets the Widget to be in the refresh state. The UI will be updated to
* show the 'Refreshing' view.
*
* @param doScroll - true if you want to force a scroll to the Refreshing
* view.
*/
public void setRefreshing(boolean doScroll);
/**
* Sets the Animation Interpolator that is used for animated scrolling.
* Defaults to a DecelerateInterpolator
*
* @param interpolator - Interpolator to use
*/
public void setScrollAnimationInterpolator(Interpolator interpolator);
/**
* By default the Widget disables scrolling on the Refreshable View while
* refreshing. This method can change this behaviour.
*
* @param scrollingWhileRefreshingEnabled - true if you want to enable
* scrolling while refreshing
*/
public void setScrollingWhileRefreshingEnabled(boolean scrollingWhileRefreshingEnabled);
/**
* A mutator to enable/disable whether the 'Refreshing' View should be
* automatically shown when refreshing.
*
* @param showView
*/
public void setShowViewWhileRefreshing(boolean showView);
} © 2015 - 2025 Weber Informatics LLC | Privacy Policy