com.github.dm.jrt.builder.InvocationConfiguration Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of jroutine Show documentation
Show all versions of jroutine Show documentation
Parallel programming on the go
/*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.github.dm.jrt.builder;
import com.github.dm.jrt.log.Log;
import com.github.dm.jrt.log.Log.LogLevel;
import com.github.dm.jrt.log.Logger;
import com.github.dm.jrt.runner.Runner;
import com.github.dm.jrt.util.TimeDuration;
import org.jetbrains.annotations.NotNull;
import org.jetbrains.annotations.Nullable;
import java.util.concurrent.TimeUnit;
import static com.github.dm.jrt.util.TimeDuration.fromUnit;
/**
* Class storing the invocation configuration.
*
* Each instance is immutable, thus, in order to modify a configuration parameter, a new builder
* must be created starting from the specific configuration.
*
* The configuration has an asynchronous runner associated.
* The default runner is shared among all the routines, but a custom one can be set through the
* builder.
*
* A specific priority can be set. Every invocation will age each time an higher priority one takes
* the precedence, so that older invocations slowly increases their priority. Such mechanism has
* been implemented to avoid starvation of low priority invocations. Hence, when assigning
* priority values, it is important to keep in mind that the difference between two priorities
* corresponds to the maximum age the lower priority invocation will have, before getting precedence
* over the higher priority one.
*
* Additionally, a recycling mechanism is provided so that, when an invocation successfully
* completes, the instance is retained for future executions. Moreover, the maximum running
* invocation instances at one time can be limited by calling the specific builder method. When the
* limit is reached and an additional instance is required, the call is delayed until one becomes
* available.
*
* Finally, the number of input and output data buffered in the corresponding channel can be
* limited in order to avoid excessive memory consumption. In case the maximum number is reached
* when passing an input or output, the call blocks until enough data are consumed or the specified
* timeout elapses. In the latter case, a {@link com.github.dm.jrt.channel.TimeoutException
* TimeoutException} will be thrown.
* By default the timeout is set to 0 to avoid unexpected deadlocks.
* The order of input and output data is not guaranteed. Nevertheless, it is possible to force data
* to be delivered in the same order as they are passed to the channels, at the cost of a slightly
* increase in memory usage and computation.
*
* Created by davide-maestroni on 11/15/2014.
*/
public final class InvocationConfiguration {
/**
* Constant indicating the default value of an integer attribute.
*/
public static final int DEFAULT = Integer.MIN_VALUE;
private static final DefaultConfigurable sDefaultConfigurable = new DefaultConfigurable();
/**
* Empty configuration constant.
The configuration has all the options set to their default.
*/
public static final InvocationConfiguration DEFAULT_CONFIGURATION =
builder().buildConfiguration();
private final int mCoreInstances;
private final int mInputMaxSize;
private final OrderType mInputOrderType;
private final TimeDuration mInputTimeout;
private final Log mLog;
private final LogLevel mLogLevel;
private final int mMaxInstances;
private final int mOutputMaxSize;
private final OrderType mOutputOrderType;
private final TimeDuration mOutputTimeout;
private final int mPriority;
private final TimeDuration mReadTimeout;
private final Runner mRunner;
private final TimeoutActionType mTimeoutActionType;
/**
* Constructor.
*
* @param runner the runner used for asynchronous invocations.
* @param priority the invocation priority.
* @param maxInstances the maximum number of parallel running invocations. Must be positive.
* @param coreInstances the maximum number of retained invocation instances. Must be 0 or a
* positive number.
* @param readTimeout the timeout for an invocation instance to produce a result.
* @param actionType the action to be taken if the timeout elapses before a readable
* result is available.
* @param inputOrderType the order in which input data are collected from the input channel.
* @param inputMaxSize the maximum number of buffered input data. Must be positive.
* @param inputTimeout the maximum timeout while waiting for an input to be passed to the
* input channel.
* @param outputOrderType the order in which output data are collected from the result channel.
* @param outputMaxSize the maximum number of buffered output data. Must be positive.
* @param outputTimeout the maximum timeout while waiting for an output to be passed to the
* result channel.
* @param log the log instance.
* @param logLevel the log level.
*/
private InvocationConfiguration(@Nullable final Runner runner, final int priority,
final int maxInstances, final int coreInstances,
@Nullable final TimeDuration readTimeout, @Nullable final TimeoutActionType actionType,
@Nullable final OrderType inputOrderType, final int inputMaxSize,
@Nullable final TimeDuration inputTimeout, @Nullable final OrderType outputOrderType,
final int outputMaxSize, @Nullable final TimeDuration outputTimeout,
@Nullable final Log log, @Nullable final LogLevel logLevel) {
mRunner = runner;
mPriority = priority;
mMaxInstances = maxInstances;
mCoreInstances = coreInstances;
mReadTimeout = readTimeout;
mTimeoutActionType = actionType;
mInputOrderType = inputOrderType;
mInputMaxSize = inputMaxSize;
mInputTimeout = inputTimeout;
mOutputOrderType = outputOrderType;
mOutputMaxSize = outputMaxSize;
mOutputTimeout = outputTimeout;
mLog = log;
mLogLevel = logLevel;
}
/**
* Returns an invocation configuration builder.
*
* @return the builder.
*/
@NotNull
public static Builder builder() {
return new Builder(sDefaultConfigurable);
}
/**
* Returns an invocation configuration builder initialized with the specified configuration.
*
* @param initialConfiguration the initial configuration.
* @return the builder.
*/
@NotNull
public static Builder builderFrom(
@Nullable final InvocationConfiguration initialConfiguration) {
return (initialConfiguration == null) ? builder()
: new Builder(sDefaultConfigurable, initialConfiguration);
}
/**
* Returns an invocation configuration builder initialized with this configuration.
*
* @return the builder.
*/
@NotNull
public Builder builderFrom() {
return builderFrom(this);
}
/**
* Returns the maximum number of retained invocation instances (DEFAULT by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the maximum number.
*/
public int getCoreInstancesOr(final int valueIfNotSet) {
final int coreInstances = mCoreInstances;
return (coreInstances != DEFAULT) ? coreInstances : valueIfNotSet;
}
/**
* Returns the maximum number of buffered input data (DEFAULT by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the maximum size.
*/
public int getInputMaxSizeOr(final int valueIfNotSet) {
final int inputMaxSize = mInputMaxSize;
return (inputMaxSize != DEFAULT) ? inputMaxSize : valueIfNotSet;
}
/**
* Returns the input data order (null by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the order type.
*/
public OrderType getInputOrderTypeOr(@Nullable final OrderType valueIfNotSet) {
final OrderType inputOrderType = mInputOrderType;
return (inputOrderType != null) ? inputOrderType : valueIfNotSet;
}
/**
* Returns the maximum timeout while waiting for an input to be passed to the input channel
* (null by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the timeout.
*/
public TimeDuration getInputTimeoutOr(@Nullable final TimeDuration valueIfNotSet) {
final TimeDuration inputTimeout = mInputTimeout;
return (inputTimeout != null) ? inputTimeout : valueIfNotSet;
}
/**
* Returns the log level (null by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the log level.
*/
public LogLevel getLogLevelOr(@Nullable final LogLevel valueIfNotSet) {
final LogLevel logLevel = mLogLevel;
return (logLevel != null) ? logLevel : valueIfNotSet;
}
/**
* Returns the log instance (null by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the log instance.
*/
public Log getLogOr(@Nullable final Log valueIfNotSet) {
final Log log = mLog;
return (log != null) ? log : valueIfNotSet;
}
/**
* Returns the maximum number of parallel running invocation instances (DEFAULT by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the maximum number.
*/
public int getMaxInstancesOr(final int valueIfNotSet) {
final int maxInstances = mMaxInstances;
return (maxInstances != DEFAULT) ? maxInstances : valueIfNotSet;
}
/**
* Returns the maximum number of buffered output data (DEFAULT by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the maximum size.
*/
public int getOutputMaxSizeOr(final int valueIfNotSet) {
final int outputMaxSize = mOutputMaxSize;
return (outputMaxSize != DEFAULT) ? outputMaxSize : valueIfNotSet;
}
/**
* Returns the output data order (null by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the order type.
*/
public OrderType getOutputOrderTypeOr(@Nullable final OrderType valueIfNotSet) {
final OrderType outputOrderType = mOutputOrderType;
return (outputOrderType != null) ? outputOrderType : valueIfNotSet;
}
/**
* Returns the maximum timeout while waiting for an output to be passed to the result channel
* (null by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the timeout.
*/
public TimeDuration getOutputTimeoutOr(@Nullable final TimeDuration valueIfNotSet) {
final TimeDuration outputTimeout = mOutputTimeout;
return (outputTimeout != null) ? outputTimeout : valueIfNotSet;
}
/**
* Returns the invocation priority (DEFAULT by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the priority.
*/
public int getPriorityOr(final int valueIfNotSet) {
final int priority = mPriority;
return (priority != DEFAULT) ? priority : valueIfNotSet;
}
/**
* Returns the action to be taken if the timeout elapses before a readable result is available
* (null by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the action type.
*/
public TimeoutActionType getReadTimeoutActionOr(
@Nullable final TimeoutActionType valueIfNotSet) {
final TimeoutActionType timeoutActionType = mTimeoutActionType;
return (timeoutActionType != null) ? timeoutActionType : valueIfNotSet;
}
/**
* Returns the timeout for an invocation instance to produce a readable result (null by
* default).
*
* @param valueIfNotSet the default value if none was set.
* @return the timeout.
*/
public TimeDuration getReadTimeoutOr(@Nullable final TimeDuration valueIfNotSet) {
final TimeDuration readTimeout = mReadTimeout;
return (readTimeout != null) ? readTimeout : valueIfNotSet;
}
/**
* Returns the runner used for asynchronous invocations (null by default).
*
* @param valueIfNotSet the default value if none was set.
* @return the runner instance.
*/
public Runner getRunnerOr(@Nullable final Runner valueIfNotSet) {
final Runner runner = mRunner;
return (runner != null) ? runner : valueIfNotSet;
}
@Override
public int hashCode() {
// AUTO-GENERATED CODE
int result = mRunner != null ? mRunner.hashCode() : 0;
result = 31 * result + mCoreInstances;
result = 31 * result + mInputMaxSize;
result = 31 * result + (mInputOrderType != null ? mInputOrderType.hashCode() : 0);
result = 31 * result + (mInputTimeout != null ? mInputTimeout.hashCode() : 0);
result = 31 * result + (mLog != null ? mLog.hashCode() : 0);
result = 31 * result + (mLogLevel != null ? mLogLevel.hashCode() : 0);
result = 31 * result + mMaxInstances;
result = 31 * result + mOutputMaxSize;
result = 31 * result + (mOutputOrderType != null ? mOutputOrderType.hashCode() : 0);
result = 31 * result + (mOutputTimeout != null ? mOutputTimeout.hashCode() : 0);
result = 31 * result + mPriority;
result = 31 * result + (mReadTimeout != null ? mReadTimeout.hashCode() : 0);
result = 31 * result + (mTimeoutActionType != null ? mTimeoutActionType.hashCode() : 0);
return result;
}
@Override
@SuppressWarnings("SimplifiableIfStatement")
public boolean equals(final Object o) {
// AUTO-GENERATED CODE
if (this == o) {
return true;
}
if (!(o instanceof InvocationConfiguration)) {
return false;
}
final InvocationConfiguration that = (InvocationConfiguration) o;
if (mCoreInstances != that.mCoreInstances) {
return false;
}
if (mInputMaxSize != that.mInputMaxSize) {
return false;
}
if (mMaxInstances != that.mMaxInstances) {
return false;
}
if (mOutputMaxSize != that.mOutputMaxSize) {
return false;
}
if (mPriority != that.mPriority) {
return false;
}
if (mRunner != null ? !mRunner.equals(that.mRunner) : that.mRunner != null) {
return false;
}
if (mInputOrderType != that.mInputOrderType) {
return false;
}
if (mInputTimeout != null ? !mInputTimeout.equals(that.mInputTimeout)
: that.mInputTimeout != null) {
return false;
}
if (mLog != null ? !mLog.equals(that.mLog) : that.mLog != null) {
return false;
}
if (mLogLevel != that.mLogLevel) {
return false;
}
if (mOutputOrderType != that.mOutputOrderType) {
return false;
}
if (mOutputTimeout != null ? !mOutputTimeout.equals(that.mOutputTimeout)
: that.mOutputTimeout != null) {
return false;
}
if (mReadTimeout != null ? !mReadTimeout.equals(that.mReadTimeout)
: that.mReadTimeout != null) {
return false;
}
return mTimeoutActionType == that.mTimeoutActionType;
}
@Override
public String toString() {
// AUTO-GENERATED CODE
return "InvocationConfiguration{" +
"mRunner=" + mRunner +
", mCoreInstances=" + mCoreInstances +
", mInputMaxSize=" + mInputMaxSize +
", mInputOrderType=" + mInputOrderType +
", mInputTimeout=" + mInputTimeout +
", mLog=" + mLog +
", mLogLevel=" + mLogLevel +
", mMaxInstances=" + mMaxInstances +
", mOutputMaxSize=" + mOutputMaxSize +
", mOutputOrderType=" + mOutputOrderType +
", mOutputTimeout=" + mOutputTimeout +
", mPriority=" + mPriority +
", mReadTimeout=" + mReadTimeout +
", mTimeoutActionType=" + mTimeoutActionType +
'}';
}
/**
* Creates a new logger.
*
* @param context the context.
* @return the new logger.
*/
@NotNull
public Logger newLogger(@NotNull final Object context) {
return Logger.newLogger(getLogOr(null), getLogLevelOr(null), context);
}
/**
* Enumeration defining how data are ordered inside a channel.
*/
public enum OrderType {
/**
* Order by call.
* Data are passed to the invocation or the output consumer in the same order as they are
* passed to the channel, independently from the specific delay.
*/
BY_CALL,
/**
* Order by delay.
* Data are passed to the invocation or the output consumer in the same order as they are
* delivered based on their delay.
*/
BY_DELAY,
/**
* Order by chance.
* There is no guarantee about the data order.
*/
BY_CHANCE
}
/**
* Enumeration indicating the type of action to be taken on output channel timeout.
*/
public enum TimeoutActionType {
/**
* Throw.
* If no result is available after the specified timeout, the called method will throw an
* {@link com.github.dm.jrt.channel.ExecutionTimeoutException ExecutionTimeoutException}.
*/
THROW,
/**
* Break execution.
* If no result is available after the specified timeout, the called method will stop its
* execution and exit immediately.
*/
EXIT,
/**
* Abort invocation.
* If no result is available after the specified timeout, the invocation will be aborted and
* the method will immediately exit.
*/
ABORT
}
/**
* Interface exposing constants which can be used as a common set of priorities.
* Note that, since the priority value can be any in an integer range, it is always possible to
* customize the values so to create a personalized set.
*/
public interface AgingPriority {
/**
* High priority.
*/
int HIGH_PRIORITY = 10;
/**
* Highest priority.
*/
int HIGHEST_PRIORITY = HIGH_PRIORITY << 1;
/**
* Low priority.
*/
int LOWEST_PRIORITY = -HIGHEST_PRIORITY;
/**
* Lowest priority.
*/
int LOW_PRIORITY = -HIGH_PRIORITY;
/**
* Normal priority.
*/
int NORMAL_PRIORITY = 0;
}
/**
* Interface defining a configurable object.
*
* @param the configurable object type.
*/
public interface Configurable {
/**
* Sets the specified configuration and returns the configurable instance.
*
* @param configuration the configuration.
* @return the configurable instance.
*/
@NotNull
TYPE setConfiguration(@NotNull InvocationConfiguration configuration);
}
/**
* Interface exposing constants which can be used as a set of priorities ignoring the aging of
* executions.
* Note that, since the priority value can be any in an integer range, it is always possible to
* customize the values so to create a personalized set.
*/
public interface NotAgingPriority {
/**
* Highest priority.
*/
int HIGHEST_PRIORITY = Integer.MAX_VALUE;
/**
* High priority.
*/
int HIGH_PRIORITY = HIGHEST_PRIORITY >> 1;
/**
* Low priority.
*/
int LOWEST_PRIORITY = -HIGHEST_PRIORITY;
/**
* Lowest priority.
*/
int LOW_PRIORITY = -HIGH_PRIORITY;
/**
* Normal priority.
*/
int NORMAL_PRIORITY = 0;
}
/**
* Builder of invocation configurations.
*
* @param the configurable object type.
*/
public static final class Builder {
private final Configurable mConfigurable;
private int mCoreInstances;
private int mInputMaxSize;
private OrderType mInputOrderType;
private TimeDuration mInputTimeout;
private Log mLog;
private LogLevel mLogLevel;
private int mMaxInstances;
private int mOutputMaxSize;
private OrderType mOutputOrderType;
private TimeDuration mOutputTimeout;
private int mPriority;
private TimeDuration mReadTimeout;
private Runner mRunner;
private TimeoutActionType mTimeoutActionType;
/**
* Constructor.
*
* @param configurable the configurable instance.
*/
@SuppressWarnings("ConstantConditions")
public Builder(@NotNull final Configurable configurable) {
if (configurable == null) {
throw new NullPointerException("the configurable instance must no be null");
}
mConfigurable = configurable;
mPriority = DEFAULT;
mMaxInstances = DEFAULT;
mCoreInstances = DEFAULT;
mInputMaxSize = DEFAULT;
mOutputMaxSize = DEFAULT;
}
/**
* Constructor.
*
* @param configurable the configurable instance.
* @param initialConfiguration the initial configuration.
*/
@SuppressWarnings("ConstantConditions")
public Builder(@NotNull final Configurable configurable,
@NotNull final InvocationConfiguration initialConfiguration) {
if (configurable == null) {
throw new NullPointerException("the configurable instance must no be null");
}
mConfigurable = configurable;
setConfiguration(initialConfiguration);
}
/**
* Sets the configuration and returns the configurable object.
*
* @return the configurable object.
*/
@NotNull
public TYPE set() {
return mConfigurable.setConfiguration(buildConfiguration());
}
/**
* Applies the specified configuration to this builder. A null value means that all the
* configuration options need to be set to their default value, otherwise only the set
* options will be applied.
*
* @param configuration the invocation configuration.
* @return this builder.
*/
@NotNull
public Builder with(@Nullable final InvocationConfiguration configuration) {
if (configuration == null) {
setConfiguration(DEFAULT_CONFIGURATION);
return this;
}
applyBaseConfiguration(configuration);
applyChannelConfiguration(configuration);
applyLogConfiguration(configuration);
return this;
}
/**
* Sets the number of invocation instances, which represents the core pool of reusable
* invocations. A {@link InvocationConfiguration#DEFAULT DEFAULT} value means that it is
* up to the specific implementation to choose a default one.
*
* @param coreInstances the core number of instances.
* @return this builder.
* @throws java.lang.IllegalArgumentException if the number is negative.
*/
@NotNull
public Builder withCoreInstances(final int coreInstances) {
if ((coreInstances != DEFAULT) && (coreInstances < 0)) {
throw new IllegalArgumentException(
"the maximum number of retained instances cannot be negative: "
+ coreInstances);
}
mCoreInstances = coreInstances;
return this;
}
/**
* Sets the maximum number of data that the input channel can retain before they are
* consumed. A {@link InvocationConfiguration#DEFAULT DEFAULT} value means that it is up
* to the specific implementation to choose a default one.
*
* @param inputMaxSize the maximum size.
* @return this builder.
* @throws java.lang.IllegalArgumentException if the number is less than 1.
*/
@NotNull
public Builder withInputMaxSize(final int inputMaxSize) {
if ((inputMaxSize != DEFAULT) && (inputMaxSize <= 0)) {
throw new IllegalArgumentException(
"the input buffer size cannot be 0 or negative: " + inputMaxSize);
}
mInputMaxSize = inputMaxSize;
return this;
}
/**
* Sets the order in which input data are collected from the input channel. A null value
* means that it is up to the specific implementation to choose a default one.
* Note that this is just the initial configuration of the invocation, since the channel
* order can be dynamically changed through the dedicated methods.
*
* @param orderType the order type.
* @return this builder.
*/
@NotNull
public Builder withInputOrder(@Nullable final OrderType orderType) {
mInputOrderType = orderType;
return this;
}
/**
* Sets the timeout for an input channel to have room for additional data.
*
* @param timeout the timeout.
* @param timeUnit the timeout time unit.
* @return this builder.
* @throws java.lang.IllegalArgumentException if the specified timeout is negative.
*/
@NotNull
public Builder withInputTimeout(final long timeout,
@NotNull final TimeUnit timeUnit) {
return withInputTimeout(fromUnit(timeout, timeUnit));
}
/**
* Sets the timeout for an input channel to have room for additional data. A null value
* means that it is up to the specific implementation to choose a default one.
*
* @param timeout the timeout.
* @return this builder.
*/
@NotNull
public Builder withInputTimeout(@Nullable final TimeDuration timeout) {
mInputTimeout = timeout;
return this;
}
/**
* Sets the log instance. A null value means that it is up to the specific implementation to
* choose a default one.
*
* @param log the log instance.
* @return this builder.
*/
@NotNull
public Builder withLog(@Nullable final Log log) {
mLog = log;
return this;
}
/**
* Sets the log level. A null value means that it is up to the specific implementation to
* choose a default one.
*
* @param level the log level.
* @return this builder.
*/
@NotNull
public Builder withLogLevel(@Nullable final LogLevel level) {
mLogLevel = level;
return this;
}
/**
* Sets the max number of concurrently running invocation instances. A
* {@link InvocationConfiguration#DEFAULT DEFAULT} value means that it is up to the
* specific implementation to choose a default one.
*
* @param maxInstances the max number of instances.
* @return this builder.
* @throws java.lang.IllegalArgumentException if the number is less than 1.
*/
@NotNull
public Builder withMaxInstances(final int maxInstances) {
if ((maxInstances != DEFAULT) && (maxInstances < 1)) {
throw new IllegalArgumentException(
"the maximum number of concurrently running instances cannot be less than"
+ " 1: " + maxInstances);
}
mMaxInstances = maxInstances;
return this;
}
/**
* Sets the maximum number of data that the result channel can retain before they are
* consumed. A {@link InvocationConfiguration#DEFAULT DEFAULT} value means that it is up
* to the specific implementation to choose a default one.
*
* @param outputMaxSize the maximum size.
* @return this builder.
* @throws java.lang.IllegalArgumentException if the number is less than 1.
*/
@NotNull
public Builder withOutputMaxSize(final int outputMaxSize) {
if ((outputMaxSize != DEFAULT) && (outputMaxSize <= 0)) {
throw new IllegalArgumentException(
"the output buffer size cannot be 0 or negative: " + outputMaxSize);
}
mOutputMaxSize = outputMaxSize;
return this;
}
/**
* Sets the order in which output data are collected from the result channel. A null value
* means that it is up to the specific implementation to choose a default order one.
* Note that this is just the initial configuration of the invocation, since the channel
* order can be dynamically changed through the dedicated methods.
*
* @param orderType the order type.
* @return this builder.
*/
@NotNull
public Builder withOutputOrder(@Nullable final OrderType orderType) {
mOutputOrderType = orderType;
return this;
}
/**
* Sets the timeout for a result channel to have room for additional data.
*
* @param timeout the timeout.
* @param timeUnit the timeout time unit.
* @return this builder.
* @throws java.lang.IllegalArgumentException if the specified timeout is negative.
*/
@NotNull
public Builder withOutputTimeout(final long timeout,
@NotNull final TimeUnit timeUnit) {
return withOutputTimeout(fromUnit(timeout, timeUnit));
}
/**
* Sets the timeout for a result channel to have room for additional data. A null value
* means that it is up to the specific implementation to choose a default one.
*
* @param timeout the timeout.
* @return this builder.
*/
@NotNull
public Builder withOutputTimeout(@Nullable final TimeDuration timeout) {
mOutputTimeout = timeout;
return this;
}
/**
* Sets the invocation priority. A {@link InvocationConfiguration#DEFAULT DEFAULT} value
* means that the invocations will be executed with no specific priority.
*
* @param priority the priority.
* @return this builder.
* @see com.github.dm.jrt.runner.PriorityRunner PriorityRunner
*/
@NotNull
public Builder withPriority(final int priority) {
mPriority = priority;
return this;
}
/**
* Sets the timeout for an invocation instance to produce a readable result.
* Note that this is just the initial configuration of the invocation, since the output
* timeout can be dynamically changed through the dedicated methods.
*
* @param timeout the timeout.
* @param timeUnit the timeout time unit.
* @return this builder.
* @throws java.lang.IllegalArgumentException if the specified timeout is negative.
*/
@NotNull
public Builder withReadTimeout(final long timeout, @NotNull final TimeUnit timeUnit) {
return withReadTimeout(fromUnit(timeout, timeUnit));
}
/**
* Sets the timeout for an invocation instance to produce a readable result. A null value
* means that it is up to the specific implementation to choose a default one.
* Note that this is just the initial configuration of the invocation, since the output
* timeout can be dynamically changed through the dedicated methods.
*
* @param timeout the timeout.
* @return this builder.
*/
@NotNull
public Builder withReadTimeout(@Nullable final TimeDuration timeout) {
mReadTimeout = timeout;
return this;
}
/**
* Sets the action to be taken if the timeout elapses before a result can be read from the
* output channel. A null value means that it is up to the specific implementation to choose
* a default one.
* Note that this is just the initial configuration of the invocation, since the output
* timeout action can be dynamically changed through the dedicated methods.
*
* @param actionType the action type.
* @return this builder.
*/
@NotNull
public Builder withReadTimeoutAction(@Nullable final TimeoutActionType actionType) {
mTimeoutActionType = actionType;
return this;
}
/**
* Sets the asynchronous runner instance. A null value means that it is up to the specific
* implementation to choose a default one.
*
* @param runner the runner instance.
* @return this builder.
*/
@NotNull
public Builder withRunner(@Nullable final Runner runner) {
mRunner = runner;
return this;
}
private void applyBaseConfiguration(@NotNull final InvocationConfiguration configuration) {
final Runner runner = configuration.mRunner;
if (runner != null) {
withRunner(runner);
}
final int priority = configuration.mPriority;
if (priority != DEFAULT) {
withPriority(priority);
}
final int maxInvocations = configuration.mMaxInstances;
if (maxInvocations != DEFAULT) {
withMaxInstances(maxInvocations);
}
final int coreInvocations = configuration.mCoreInstances;
if (coreInvocations != DEFAULT) {
withCoreInstances(coreInvocations);
}
final TimeDuration readTimeout = configuration.mReadTimeout;
if (readTimeout != null) {
withReadTimeout(readTimeout);
}
final TimeoutActionType timeoutActionType = configuration.mTimeoutActionType;
if (timeoutActionType != null) {
withReadTimeoutAction(timeoutActionType);
}
}
private void applyChannelConfiguration(
@NotNull final InvocationConfiguration configuration) {
final OrderType inputOrderType = configuration.mInputOrderType;
if (inputOrderType != null) {
withInputOrder(inputOrderType);
}
final int inputSize = configuration.mInputMaxSize;
if (inputSize != DEFAULT) {
withInputMaxSize(inputSize);
}
final TimeDuration inputTimeout = configuration.mInputTimeout;
if (inputTimeout != null) {
withInputTimeout(inputTimeout);
}
final OrderType outputOrderType = configuration.mOutputOrderType;
if (outputOrderType != null) {
withOutputOrder(outputOrderType);
}
final int outputSize = configuration.mOutputMaxSize;
if (outputSize != DEFAULT) {
withOutputMaxSize(outputSize);
}
final TimeDuration outputTimeout = configuration.mOutputTimeout;
if (outputTimeout != null) {
withOutputTimeout(outputTimeout);
}
}
private void applyLogConfiguration(@NotNull final InvocationConfiguration configuration) {
final Log log = configuration.mLog;
if (log != null) {
withLog(log);
}
final LogLevel logLevel = configuration.mLogLevel;
if (logLevel != null) {
withLogLevel(logLevel);
}
}
@NotNull
private InvocationConfiguration buildConfiguration() {
return new InvocationConfiguration(mRunner, mPriority, mMaxInstances, mCoreInstances,
mReadTimeout, mTimeoutActionType, mInputOrderType,
mInputMaxSize, mInputTimeout, mOutputOrderType,
mOutputMaxSize, mOutputTimeout, mLog, mLogLevel);
}
private void setConfiguration(@NotNull final InvocationConfiguration configuration) {
mRunner = configuration.mRunner;
mPriority = configuration.mPriority;
mMaxInstances = configuration.mMaxInstances;
mCoreInstances = configuration.mCoreInstances;
mReadTimeout = configuration.mReadTimeout;
mTimeoutActionType = configuration.mTimeoutActionType;
mInputOrderType = configuration.mInputOrderType;
mInputMaxSize = configuration.mInputMaxSize;
mInputTimeout = configuration.mInputTimeout;
mOutputOrderType = configuration.mOutputOrderType;
mOutputMaxSize = configuration.mOutputMaxSize;
mOutputTimeout = configuration.mOutputTimeout;
mLog = configuration.mLog;
mLogLevel = configuration.mLogLevel;
}
}
/**
* Default configurable implementation.
*/
private static class DefaultConfigurable implements Configurable {
@NotNull
public InvocationConfiguration setConfiguration(
@NotNull final InvocationConfiguration configuration) {
return configuration;
}
}
}