com.amazonaws.services.dynamodbv2.model.AttributeValueUpdate Maven / Gradle / Ivy
Show all versions of aws-sdk-android Show documentation
/*
* Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.dynamodbv2.model;
import java.io.Serializable;
/**
*
* For the UpdateItem operation, represents the attributes to be
* modified, the action to perform on each, and the new value for each.
*
*
* NOTE: You cannot use UpdateItem to update any primary key
* attributes. Instead, you will need to delete the item, and then use
* PutItem to create a new item with new attributes.
*
*
* Attribute values cannot be null; string and binary type attributes
* must have lengths greater than zero; and set type attributes must not
* be empty. Requests with empty values will be rejected with a
* ValidationException .
*
*/
public class AttributeValueUpdate implements Serializable {
/**
* Represents the data for an attribute. You can set one, and only one,
* of the elements.
*/
private AttributeValue value;
/**
* Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table. If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* Constraints:
* Allowed Values: ADD, PUT, DELETE
*/
private String action;
/**
* Default constructor for a new AttributeValueUpdate object. Callers should use the
* setter or fluent setter (with...) methods to initialize this object after creating it.
*/
public AttributeValueUpdate() {}
/**
* Constructs a new AttributeValueUpdate object.
* Callers should use the setter or fluent setter (with...) methods to
* initialize any additional object members.
*
* @param value Represents the data for an attribute. You can set one,
* and only one, of the elements.
* @param action Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table.
If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*/
public AttributeValueUpdate(AttributeValue value, String action) {
setValue(value);
setAction(action);
}
/**
* Constructs a new AttributeValueUpdate object.
* Callers should use the setter or fluent setter (with...) methods to
* initialize any additional object members.
*
* @param value Represents the data for an attribute. You can set one,
* and only one, of the elements.
* @param action Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table. If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*/
public AttributeValueUpdate(AttributeValue value, AttributeAction action) {
this.value = value;
this.action = action.toString();
}
/**
* Represents the data for an attribute. You can set one, and only one,
* of the elements.
*
* @return Represents the data for an attribute. You can set one, and only one,
* of the elements.
*/
public AttributeValue getValue() {
return value;
}
/**
* Represents the data for an attribute. You can set one, and only one,
* of the elements.
*
* @param value Represents the data for an attribute. You can set one, and only one,
* of the elements.
*/
public void setValue(AttributeValue value) {
this.value = value;
}
/**
* Represents the data for an attribute. You can set one, and only one,
* of the elements.
*
* Returns a reference to this object so that method calls can be chained together.
*
* @param value Represents the data for an attribute. You can set one, and only one,
* of the elements.
*
* @return A reference to this updated object so that method calls can be chained
* together.
*/
public AttributeValueUpdate withValue(AttributeValue value) {
this.value = value;
return this;
}
/**
* Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table.
If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* Constraints:
* Allowed Values: ADD, PUT, DELETE
*
* @return Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table.
If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* @see AttributeAction
*/
public String getAction() {
return action;
}
/**
* Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table. If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* Constraints:
* Allowed Values: ADD, PUT, DELETE
*
* @param action Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table.
If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* @see AttributeAction
*/
public void setAction(String action) {
this.action = action;
}
/**
* Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table. If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* Returns a reference to this object so that method calls can be chained together.
*
* Constraints:
* Allowed Values: ADD, PUT, DELETE
*
* @param action Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table.
If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* @return A reference to this updated object so that method calls can be chained
* together.
*
* @see AttributeAction
*/
public AttributeValueUpdate withAction(String action) {
this.action = action;
return this;
}
/**
* Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table. If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* Constraints:
* Allowed Values: ADD, PUT, DELETE
*
* @param action Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table.
If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* @see AttributeAction
*/
public void setAction(AttributeAction action) {
this.action = action.toString();
}
/**
* Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table. If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* Returns a reference to this object so that method calls can be chained together.
*
* Constraints:
* Allowed Values: ADD, PUT, DELETE
*
* @param action Specifies how to perform the update. Valid values are
* PUT, DELETE, and ADD. The
* behavior depends on whether the specified primary key already exists
* in the table.
If an item with the specified Key is found
* in the table:
-
PUT - Adds the specified
* attribute to the item. If the attribute already exists, it is replaced
* by the new value.
-
DELETE - If no value is
* specified, the attribute and its value are removed from the item. The
* data type of the specified value must match the existing value's data
* type.
If a set of values is specified, then those values are
* subtracted from the old set. For example, if the attribute value was
* the set [a,b,c] and the DELETE action specified
* [a,c], then the final attribute value would be
* [b]. Specifying an empty set is an error.
-
*
ADD - If the attribute does not already exist, then
* the attribute and its values are added to the item. If the attribute
* does exist, then the behavior of ADD depends on the data
* type of the attribute:
-
If the existing attribute is a
* number, and if Value is also a number, then the Value is
* mathematically added to the existing attribute. If Value is a
* negative number, then it is subtracted from the existing attribute.
* If you use ADD to increment or decrement a
* number value for an item that doesn't exist before the update,
* DynamoDB uses 0 as the initial value.
In addition, if you use
* ADD to update an existing item, and intend to increment
* or decrement an attribute value which does not yet exist, DynamoDB
* uses 0 as the initial value. For example, suppose that
* the item you want to update does not yet have an attribute named
* itemcount, but you decide to ADD the number
* 3 to this attribute anyway, even though it currently does
* not exist. DynamoDB will create the itemcount attribute, set
* its initial value to 0, and finally add 3 to
* it. The result will be a new itemcount attribute in the item,
* with a value of 3.
-
If the existing
* data type is a set, and if the Value is also a set, then the
* Value is added to the existing set. (This is a set
* operation, not mathematical addition.) For example, if the attribute
* value was the set [1,2], and the ADD action
* specified [3], then the final attribute value would be
* [1,2,3]. An error occurs if an Add action is specified
* for a set attribute and the attribute type specified does not match
* the existing set type.
Both sets must have the same primitive data
* type. For example, if the existing data type is a set of strings, the
* Value must also be a set of strings. The same holds true for
* number sets and binary sets.
This action is only valid
* for an existing attribute whose data type is number or is a set. Do
* not use ADD for any other data types.
* If no item with the specified Key is found:
-
*
PUT - DynamoDB creates a new item with the specified
* primary key, and then adds the attribute.
-
*
DELETE - Nothing happens; there is no attribute to
* delete.
-
ADD - DynamoDB creates an item with
* the supplied primary key and number (or set of numbers) for the
* attribute value. The only data types allowed are number and number
* set; no other data types can be specified.
*
* @return A reference to this updated object so that method calls can be chained
* together.
*
* @see AttributeAction
*/
public AttributeValueUpdate withAction(AttributeAction action) {
this.action = action.toString();
return this;
}
/**
* Returns a string representation of this object; useful for testing and
* debugging.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getValue() != null) sb.append("Value: " + getValue() + ",");
if (getAction() != null) sb.append("Action: " + getAction() );
sb.append("}");
return sb.toString();
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getValue() == null) ? 0 : getValue().hashCode());
hashCode = prime * hashCode + ((getAction() == null) ? 0 : getAction().hashCode());
return hashCode;
}
@Override
public boolean equals(Object obj) {
if (this == obj) return true;
if (obj == null) return false;
if (obj instanceof AttributeValueUpdate == false) return false;
AttributeValueUpdate other = (AttributeValueUpdate)obj;
if (other.getValue() == null ^ this.getValue() == null) return false;
if (other.getValue() != null && other.getValue().equals(this.getValue()) == false) return false;
if (other.getAction() == null ^ this.getAction() == null) return false;
if (other.getAction() != null && other.getAction().equals(this.getAction()) == false) return false;
return true;
}
}