com.amazonaws.services.kinesis.AmazonKinesis Maven / Gradle / Ivy
Show all versions of aws-sdk-android Show documentation
/*
* Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.kinesis;
import com.amazonaws.*;
import com.amazonaws.regions.*;
import com.amazonaws.services.kinesis.model.*;
/**
* Interface for accessing AmazonKinesis.
* Amazon Kinesis Service API Reference
* Amazon Kinesis is a managed service that scales elastically for real
* time processing of streaming big data.
*
*/
public interface AmazonKinesis {
/**
* Overrides the default endpoint for this client ("https://kinesis.us-east-1.amazonaws.com").
* Callers can use this method to control which AWS region they want to work with.
*
* Callers can pass in just the endpoint (ex: "kinesis.us-east-1.amazonaws.com") or a full
* URL, including the protocol (ex: "https://kinesis.us-east-1.amazonaws.com"). If the
* protocol is not specified here, the default protocol from this client's
* {@link ClientConfiguration} will be used, which by default is HTTPS.
*
* For more information on using AWS regions with the AWS SDK for Java, and
* a complete list of all available endpoints for all AWS services, see:
*
* http://developer.amazonwebservices.com/connect/entry.jspa?externalID=3912
*
* This method is not threadsafe. An endpoint should be configured when the
* client is created and before any service requests are made. Changing it
* afterwards creates inevitable race conditions for any service requests in
* transit or retrying.
*
* @param endpoint
* The endpoint (ex: "kinesis.us-east-1.amazonaws.com") or a full URL,
* including the protocol (ex: "https://kinesis.us-east-1.amazonaws.com") of
* the region specific AWS endpoint this client will communicate
* with.
*
* @throws IllegalArgumentException
* If any problems are detected with the specified endpoint.
*/
public void setEndpoint(String endpoint) throws java.lang.IllegalArgumentException;
/**
* An alternative to {@link AmazonKinesis#setEndpoint(String)}, sets the
* regional endpoint for this client's service calls. Callers can use this
* method to control which AWS region they want to work with.
*
* By default, all service endpoints in all regions use the https protocol.
* To use http instead, specify it in the {@link ClientConfiguration}
* supplied at construction.
*
* This method is not threadsafe. A region should be configured when the
* client is created and before any service requests are made. Changing it
* afterwards creates inevitable race conditions for any service requests in
* transit or retrying.
*
* @param region
* The region this client will communicate with. See
* {@link Region#getRegion(com.amazonaws.regions.Regions)} for
* accessing a given region.
* @throws java.lang.IllegalArgumentException
* If the given region is null, or if this service isn't
* available in the given region. See
* {@link Region#isServiceSupported(String)}
* @see Region#getRegion(com.amazonaws.regions.Regions)
* @see Region#createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)
*/
public void setRegion(Region region) throws java.lang.IllegalArgumentException;
/**
*
* Adds or updates tags for the specified Amazon Kinesis stream. Each
* stream can have up to 10 tags.
*
*
* If tags have already been assigned to the stream,
* AddTagsToStream overwrites any existing tags that
* correspond to the specified tag keys.
*
*
* @param addTagsToStreamRequest Container for the necessary parameters
* to execute the AddTagsToStream service method on AmazonKinesis.
*
*
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void addTagsToStream(AddTagsToStreamRequest addTagsToStreamRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Puts (writes) a single data record from a producer into an Amazon
* Kinesis stream. Call PutRecord to send data from the
* producer into the Amazon Kinesis stream for real-time ingestion and
* subsequent processing, one record at a time. Each shard can support up
* to 1000 records written per second, up to a maximum total of 1 MB data
* written per second.
*
*
* You must specify the name of the stream that captures, stores, and
* transports the data; a partition key; and the data blob itself.
*
*
* The data blob can be any type of data; for example, a segment from a
* log file, geographic/location data, website clickstream data, and so
* on.
*
*
* The partition key is used by Amazon Kinesis to distribute data across
* shards. Amazon Kinesis segregates the data records that belong to a
* data stream into multiple shards, using the partition key associated
* with each data record to determine which shard a given data record
* belongs to.
*
*
* Partition keys are Unicode strings, with a maximum length limit of
* 256 bytes. An MD5 hash function is used to map partition keys to
* 128-bit integer values and to map associated data records to shards
* using the hash key ranges of the shards. You can override hashing the
* partition key to determine the shard by explicitly specifying a hash
* value using the ExplicitHashKey parameter. For more
* information, see
* Partition Key
* in the Amazon Kinesis Developer Guide .
*
*
* PutRecord returns the shard ID of where the data record
* was placed and the sequence number that was assigned to the data
* record.
*
*
* Sequence numbers generally increase over time. To guarantee strictly
* increasing ordering, use the SequenceNumberForOrdering
* parameter. For more information, see
* Sequence Number
* in the Amazon Kinesis Developer Guide .
*
*
* If a PutRecord request cannot be processed because of
* insufficient provisioned throughput on the shard involved in the
* request, PutRecord throws
* ProvisionedThroughputExceededException .
*
*
* Data records are accessible for only 24 hours from the time that they
* are added to an Amazon Kinesis stream.
*
*
* @param putRecordRequest Container for the necessary parameters to
* execute the PutRecord service method on AmazonKinesis.
*
* @return The response from the PutRecord service method, as returned by
* AmazonKinesis.
*
* @throws ProvisionedThroughputExceededException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public PutRecordResult putRecord(PutRecordRequest putRecordRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a Amazon Kinesis stream. A stream captures and transports
* data records that are continuously emitted from different data sources
* or producers . Scale-out within an Amazon Kinesis stream is
* explicitly supported by means of shards, which are uniquely identified
* groups of data records in an Amazon Kinesis stream.
*
*
* You specify and control the number of shards that a stream is
* composed of. Each open shard can support up to 5 read transactions per
* second, up to a maximum total of 2 MB of data read per second. Each
* shard can support up to 1000 records written per second, up to a
* maximum total of 1 MB data written per second. You can add shards to a
* stream if the amount of data input increases and you can remove shards
* if the amount of data input decreases.
*
*
* The stream name identifies the stream. The name is scoped to the AWS
* account used by the application. It is also scoped by region. That is,
* two streams in two different accounts can have the same name, and two
* streams in the same account, but in two different regions, can have
* the same name.
*
*
* CreateStream is an asynchronous operation. Upon
* receiving a CreateStream request, Amazon Kinesis
* immediately returns and sets the stream status to
* CREATING . After the stream is created, Amazon Kinesis
* sets the stream status to ACTIVE . You should perform
* read and write operations only on an ACTIVE stream.
*
*
* You receive a LimitExceededException when making a
* CreateStream request if you try to do one of the
* following:
*
*
*
* - Have more than five streams in the
CREATING state at
* any point in time.
* - Create more shards than are authorized for your account.
*
*
*
* The default limit for an AWS account is 10 shards per stream. If you
* need to create a stream with more than 10 shards,
* contact AWS Support
* to increase the limit on your account.
*
*
* You can use DescribeStream to check the stream status,
* which is returned in StreamStatus .
*
*
* CreateStream has a limit of 5 transactions per second
* per account.
*
*
* @param createStreamRequest Container for the necessary parameters to
* execute the CreateStream service method on AmazonKinesis.
*
*
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws InvalidArgumentException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createStream(CreateStreamRequest createStreamRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes a stream and all its shards and data. You must shut down any
* applications that are operating on the stream before you delete the
* stream. If an application attempts to operate on a deleted stream, it
* will receive the exception ResourceNotFoundException .
*
*
* If the stream is in the ACTIVE state, you can delete it.
* After a DeleteStream request, the specified stream is in
* the DELETING state until Amazon Kinesis completes the
* deletion.
*
*
* Note: Amazon Kinesis might continue to accept data read and
* write operations, such as PutRecord, PutRecords, and GetRecords, on a
* stream in the DELETING state until the stream deletion is
* complete.
*
*
* When you delete a stream, any shards in that stream are also deleted,
* and any tags are dissociated from the stream.
*
*
* You can use the DescribeStream operation to check the state of the
* stream, which is returned in StreamStatus .
*
*
* DeleteStream has a limit of 5 transactions per second
* per account.
*
*
* @param deleteStreamRequest Container for the necessary parameters to
* execute the DeleteStream service method on AmazonKinesis.
*
*
* @throws LimitExceededException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteStream(DeleteStreamRequest deleteStreamRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Merges two adjacent shards in a stream and combines them into a
* single shard to reduce the stream's capacity to ingest and transport
* data. Two shards are considered adjacent if the union of the hash key
* ranges for the two shards form a contiguous set with no gaps. For
* example, if you have two shards, one with a hash key range of
* 276...381 and the other with a hash key range of 382...454, then you
* could merge these two shards into a single shard that would have a
* hash key range of 276...454. After the merge, the single child shard
* receives data for all hash key values covered by the two parent
* shards.
*
*
* MergeShards is called when there is a need to reduce the
* overall capacity of a stream because of excess capacity that is not
* being used. You must specify the shard to be merged and the adjacent
* shard for a stream. For more information about merging shards, see
* Merge Two Shards
* in the Amazon Kinesis Developer Guide .
*
*
* If the stream is in the ACTIVE state, you can call
* MergeShards . If a stream is in the CREATING
* , UPDATING , or DELETING state,
* MergeShards returns a ResourceInUseException
* . If the specified stream does not exist, MergeShards
* returns a ResourceNotFoundException .
*
*
* You can use DescribeStream to check the state of the stream, which is
* returned in StreamStatus .
*
*
* MergeShards is an asynchronous operation. Upon receiving
* a MergeShards request, Amazon Kinesis immediately returns
* a response and sets the StreamStatus to
* UPDATING . After the operation is completed, Amazon
* Kinesis sets the StreamStatus to ACTIVE .
* Read and write operations continue to work while the stream is in the
* UPDATING state.
*
*
* You use DescribeStream to determine the shard IDs that are specified
* in the MergeShards request.
*
*
* If you try to operate on too many streams in parallel using
* CreateStream, DeleteStream, MergeShards or SplitShard,
* you will receive a LimitExceededException .
*
*
* MergeShards has limit of 5 transactions per second per
* account.
*
*
* @param mergeShardsRequest Container for the necessary parameters to
* execute the MergeShards service method on AmazonKinesis.
*
*
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void mergeShards(MergeShardsRequest mergeShardsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Puts (writes) multiple data records from a producer into an Amazon
* Kinesis stream in a single call (also referred to as a
* PutRecords request). Use this operation to send data from
* a data producer into the Amazon Kinesis stream for real-time ingestion
* and processing. Each shard can support up to 1000 records written per
* second, up to a maximum total of 1 MB data written per second.
*
*
* You must specify the name of the stream that captures, stores, and
* transports the data; and an array of request Records ,
* with each record in the array requiring a partition key and data blob.
*
*
* The data blob can be any type of data; for example, a segment from a
* log file, geographic/location data, website clickstream data, and so
* on.
*
*
* The partition key is used by Amazon Kinesis as input to a hash
* function that maps the partition key and associated data to a specific
* shard. An MD5 hash function is used to map partition keys to 128-bit
* integer values and to map associated data records to shards. As a
* result of this hashing mechanism, all data records with the same
* partition key map to the same shard within the stream. For more
* information, see
* Partition Key
* in the Amazon Kinesis Developer Guide .
*
*
* Each record in the Records array may include an optional
* parameter, ExplicitHashKey , which overrides the
* partition key to shard mapping. This parameter allows a data producer
* to determine explicitly the shard where the record is stored. For more
* information, see
* Adding Multiple Records with PutRecords
* in the Amazon Kinesis Developer Guide .
*
*
* The PutRecords response includes an array of response
* Records . Each record in the response array directly
* correlates with a record in the request array using natural ordering,
* from the top to the bottom of the request and response. The response
* Records array always includes the same number of records
* as the request array.
*
*
* The response Records array includes both successfully
* and unsuccessfully processed records. Amazon Kinesis attempts to
* process all records in each PutRecords request. A single
* record failure does not stop the processing of subsequent records.
*
*
* A successfully-processed record includes ShardId and
* SequenceNumber values. The ShardId parameter
* identifies the shard in the stream where the record is stored. The
* SequenceNumber parameter is an identifier assigned to the
* put record, unique to all records in the stream.
*
*
* An unsuccessfully-processed record includes ErrorCode
* and ErrorMessage values. ErrorCode reflects
* the type of error and can be one of the following values:
* ProvisionedThroughputExceededException or
* InternalFailure . ErrorMessage provides more
* detailed information about the
* ProvisionedThroughputExceededException exception
* including the account ID, stream name, and shard ID of the record that
* was throttled.
*
*
* Data records are accessible for only 24 hours from the time that they
* are added to an Amazon Kinesis stream.
*
*
* @param putRecordsRequest Container for the necessary parameters to
* execute the PutRecords service method on AmazonKinesis.
*
* @return The response from the PutRecords service method, as returned
* by AmazonKinesis.
*
* @throws ProvisionedThroughputExceededException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public PutRecordsResult putRecords(PutRecordsRequest putRecordsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified stream.
*
*
* The information about the stream includes its current status, its
* Amazon Resource Name (ARN), and an array of shard objects. For each
* shard object, there is information about the hash key and sequence
* number ranges that the shard spans, and the IDs of any earlier shards
* that played in a role in creating the shard. A sequence number is the
* identifier associated with every record ingested in the Amazon Kinesis
* stream. The sequence number is assigned when a record is put into the
* stream.
*
*
* You can limit the number of returned shards using the
* Limit parameter. The number of shards in a stream may be
* too large to return from a single call to DescribeStream
* . You can detect this by using the HasMoreShards flag in
* the returned output. HasMoreShards is set to
* true when there is more data available.
*
*
* DescribeStream is a paginated operation. If there are
* more shards available, you can request them using the shard ID of the
* last shard returned. Specify this ID in the
* ExclusiveStartShardId parameter in a subsequent request
* to DescribeStream .
*
*
* DescribeStream has a limit of 10 transactions per second
* per account.
*
*
* @param describeStreamRequest Container for the necessary parameters to
* execute the DescribeStream service method on AmazonKinesis.
*
* @return The response from the DescribeStream service method, as
* returned by AmazonKinesis.
*
* @throws LimitExceededException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeStreamResult describeStream(DescribeStreamRequest describeStreamRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Gets a shard iterator. A shard iterator expires five minutes after it
* is returned to the requester.
*
*
* A shard iterator specifies the position in the shard from which to
* start reading data records sequentially. A shard iterator specifies
* this position using the sequence number of a data record in a shard. A
* sequence number is the identifier associated with every record
* ingested in the Amazon Kinesis stream. The sequence number is assigned
* when a record is put into the stream.
*
*
* You must specify the shard iterator type. For example, you can set
* the ShardIteratorType parameter to read exactly from the
* position denoted by a specific sequence number by using the
* AT_SEQUENCE_NUMBER shard iterator type, or right after
* the sequence number by using the AFTER_SEQUENCE_NUMBER
* shard iterator type, using sequence numbers returned by earlier calls
* to PutRecord, PutRecords, GetRecords, or DescribeStream. You can
* specify the shard iterator type TRIM_HORIZON in the
* request to cause ShardIterator to point to the last
* untrimmed record in the shard in the system, which is the oldest data
* record in the shard. Or you can point to just after the most recent
* record in the shard, by using the shard iterator type
* LATEST , so that you always read the most recent data in
* the shard.
*
*
* When you repeatedly read from an Amazon Kinesis stream use a
* GetShardIterator request to get the first shard iterator to to use in
* your first GetRecords request and then use the shard
* iterator returned by the GetRecords request in
* NextShardIterator for subsequent reads. A new shard
* iterator is returned by every GetRecords request in
* NextShardIterator , which you use in the
* ShardIterator parameter of the next
* GetRecords request.
*
*
* If a GetShardIterator request is made too often, you
* receive a ProvisionedThroughputExceededException . For
* more information about throughput limits, see GetRecords.
*
*
* If the shard is closed, the iterator can't return more data, and
* GetShardIterator returns null for its
* ShardIterator . A shard can be closed using SplitShard or
* MergeShards.
*
*
* GetShardIterator has a limit of 5 transactions per
* second per account per open shard.
*
*
* @param getShardIteratorRequest Container for the necessary parameters
* to execute the GetShardIterator service method on AmazonKinesis.
*
* @return The response from the GetShardIterator service method, as
* returned by AmazonKinesis.
*
* @throws ProvisionedThroughputExceededException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetShardIteratorResult getShardIterator(GetShardIteratorRequest getShardIteratorRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Lists the tags for the specified Amazon Kinesis stream.
*
*
* @param listTagsForStreamRequest Container for the necessary parameters
* to execute the ListTagsForStream service method on AmazonKinesis.
*
* @return The response from the ListTagsForStream service method, as
* returned by AmazonKinesis.
*
* @throws LimitExceededException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public ListTagsForStreamResult listTagsForStream(ListTagsForStreamRequest listTagsForStreamRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Gets data records from a shard.
*
*
* Specify a shard iterator using the ShardIterator
* parameter. The shard iterator specifies the position in the shard from
* which you want to start reading data records sequentially. If there
* are no records available in the portion of the shard that the iterator
* points to, GetRecords returns an empty list. Note that it
* might take multiple calls to get to a portion of the shard that
* contains records.
*
*
* You can scale by provisioning multiple shards. Your application
* should have one thread per shard, each reading continuously from its
* stream. To read from a stream continually, call
* GetRecords in a loop. Use GetShardIterator to get the
* shard iterator to specify in the first GetRecords call.
* GetRecords returns a new shard iterator in
* NextShardIterator . Specify the shard iterator returned
* in NextShardIterator in subsequent calls to
* GetRecords . Note that if the shard has been closed, the
* shard iterator can't return more data and GetRecords
* returns null in NextShardIterator . You can
* terminate the loop when the shard is closed, or when the shard
* iterator reaches the record with the sequence number or other
* attribute that marks it as the last record to process.
*
*
* Each data record can be up to 50 KB in size, and each shard can read
* up to 2 MB per second. You can ensure that your calls don't exceed the
* maximum supported size or throughput by using the Limit
* parameter to specify the maximum number of records that
* GetRecords can return. Consider your average record size
* when determining this limit. For example, if your average record size
* is 40 KB, you can limit the data returned to about 1 MB per call by
* specifying 25 as the limit.
*
*
* The size of the data returned by GetRecords will vary
* depending on the utilization of the shard. The maximum size of data
* that GetRecords can return is 10 MB. If a call returns 10
* MB of data, subsequent calls made within the next 5 seconds throw
* ProvisionedThroughputExceededException . If there is
* insufficient provisioned throughput on the shard, subsequent calls
* made within the next 1 second throw
* ProvisionedThroughputExceededException . Note that
* GetRecords won't return any data when it throws an
* exception. For this reason, we recommend that you wait one second
* between calls to GetRecords ; however, it's possible that
* the application will get exceptions for longer than 1 second.
*
*
* To detect whether the application is falling behind in processing,
* add a timestamp to your records and note how long it takes to process
* them. You can also monitor how much data is in a stream using the
* CloudWatch metrics for write operations ( PutRecord and
* PutRecords ). For more information, see
* Monitoring Amazon Kinesis with Amazon CloudWatch
* in the Amazon Kinesis Developer Guide .
*
*
* @param getRecordsRequest Container for the necessary parameters to
* execute the GetRecords service method on AmazonKinesis.
*
* @return The response from the GetRecords service method, as returned
* by AmazonKinesis.
*
* @throws ProvisionedThroughputExceededException
* @throws ExpiredIteratorException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetRecordsResult getRecords(GetRecordsRequest getRecordsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Splits a shard into two new shards in the stream, to increase the
* stream's capacity to ingest and transport data.
* SplitShard is called when there is a need to increase the
* overall capacity of stream because of an expected increase in the
* volume of data records being ingested.
*
*
* You can also use SplitShard when a shard appears to be
* approaching its maximum utilization, for example, when the set of
* producers sending data into the specific shard are suddenly sending
* more than previously anticipated. You can also call
* SplitShard to increase stream capacity, so that more
* Amazon Kinesis applications can simultaneously read data from the
* stream for real-time processing.
*
*
* You must specify the shard to be split and the new hash key, which is
* the position in the shard where the shard gets split in two. In many
* cases, the new hash key might simply be the average of the beginning
* and ending hash key, but it can be any hash key value in the range
* being mapped into the shard. For more information about splitting
* shards, see
* Split a Shard
* in the Amazon Kinesis Developer Guide .
*
*
* You can use DescribeStream to determine the shard ID and hash key
* values for the ShardToSplit and
* NewStartingHashKey parameters that are specified in the
* SplitShard request.
*
*
* SplitShard is an asynchronous operation. Upon receiving
* a SplitShard request, Amazon Kinesis immediately returns
* a response and sets the stream status to UPDATING . After
* the operation is completed, Amazon Kinesis sets the stream status to
* ACTIVE . Read and write operations continue to work while
* the stream is in the UPDATING state.
*
*
* You can use DescribeStream to check the status of the
* stream, which is returned in StreamStatus . If the stream
* is in the ACTIVE state, you can call
* SplitShard . If a stream is in CREATING or
* UPDATING or DELETING states,
* DescribeStream returns a
* ResourceInUseException .
*
*
* If the specified stream does not exist, DescribeStream
* returns a ResourceNotFoundException . If you try to
* create more shards than are authorized for your account, you receive a
* LimitExceededException .
*
*
* The default limit for an AWS account is 10 shards per stream. If you
* need to create a stream with more than 10 shards,
* contact AWS Support
* to increase the limit on your account.
*
*
* If you try to operate on too many streams in parallel using
* CreateStream, DeleteStream, MergeShards or SplitShard, you receive a
* LimitExceededException .
*
*
* SplitShard has limit of 5 transactions per second per
* account.
*
*
* @param splitShardRequest Container for the necessary parameters to
* execute the SplitShard service method on AmazonKinesis.
*
*
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void splitShard(SplitShardRequest splitShardRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes tags from the specified Amazon Kinesis stream.
*
*
* If you specify a tag that does not exist, it is ignored.
*
*
* @param removeTagsFromStreamRequest Container for the necessary
* parameters to execute the RemoveTagsFromStream service method on
* AmazonKinesis.
*
*
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void removeTagsFromStream(RemoveTagsFromStreamRequest removeTagsFromStreamRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Lists your streams.
*
*
* The number of streams may be too large to return from a single call
* to ListStreams . You can limit the number of returned
* streams using the Limit parameter. If you do not specify
* a value for the Limit parameter, Amazon Kinesis uses the
* default limit, which is currently 10.
*
*
* You can detect if there are more streams available to list by using
* the HasMoreStreams flag from the returned output. If
* there are more streams available, you can request more streams by
* using the name of the last stream returned by the
* ListStreams request in the
* ExclusiveStartStreamName parameter in a subsequent
* request to ListStreams . The group of stream names
* returned by the subsequent request is then added to the list. You can
* continue this process until all the stream names have been collected
* in the list.
*
*
* ListStreams has a limit of 5 transactions per second per
* account.
*
*
* @param listStreamsRequest Container for the necessary parameters to
* execute the ListStreams service method on AmazonKinesis.
*
* @return The response from the ListStreams service method, as returned
* by AmazonKinesis.
*
* @throws LimitExceededException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public ListStreamsResult listStreams(ListStreamsRequest listStreamsRequest)
throws AmazonServiceException, AmazonClientException;
/**
*
* Lists your streams.
*
*
* The number of streams may be too large to return from a single call
* to ListStreams . You can limit the number of returned
* streams using the Limit parameter. If you do not specify
* a value for the Limit parameter, Amazon Kinesis uses the
* default limit, which is currently 10.
*
*
* You can detect if there are more streams available to list by using
* the HasMoreStreams flag from the returned output. If
* there are more streams available, you can request more streams by
* using the name of the last stream returned by the
* ListStreams request in the
* ExclusiveStartStreamName parameter in a subsequent
* request to ListStreams . The group of stream names
* returned by the subsequent request is then added to the list. You can
* continue this process until all the stream names have been collected
* in the list.
*
*
* ListStreams has a limit of 5 transactions per second per
* account.
*
*
* @return The response from the ListStreams service method, as returned
* by AmazonKinesis.
*
* @throws LimitExceededException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public ListStreamsResult listStreams() throws AmazonServiceException, AmazonClientException;
/**
*
* Puts (writes) a single data record from a producer into an Amazon
* Kinesis stream. Call PutRecord to send data from the
* producer into the Amazon Kinesis stream for real-time ingestion and
* subsequent processing, one record at a time. Each shard can support up
* to 1000 records written per second, up to a maximum total of 1 MB data
* written per second.
*
*
* You must specify the name of the stream that captures, stores, and
* transports the data; a partition key; and the data blob itself.
*
*
* The data blob can be any type of data; for example, a segment from a
* log file, geographic/location data, website clickstream data, and so
* on.
*
*
* The partition key is used by Amazon Kinesis to distribute data across
* shards. Amazon Kinesis segregates the data records that belong to a
* data stream into multiple shards, using the partition key associated
* with each data record to determine which shard a given data record
* belongs to.
*
*
* Partition keys are Unicode strings, with a maximum length limit of
* 256 bytes. An MD5 hash function is used to map partition keys to
* 128-bit integer values and to map associated data records to shards
* using the hash key ranges of the shards. You can override hashing the
* partition key to determine the shard by explicitly specifying a hash
* value using the ExplicitHashKey parameter. For more
* information, see
* Partition Key
* in the Amazon Kinesis Developer Guide .
*
*
* PutRecord returns the shard ID of where the data record
* was placed and the sequence number that was assigned to the data
* record.
*
*
* Sequence numbers generally increase over time. To guarantee strictly
* increasing ordering, use the SequenceNumberForOrdering
* parameter. For more information, see
* Sequence Number
* in the Amazon Kinesis Developer Guide .
*
*
* If a PutRecord request cannot be processed because of
* insufficient provisioned throughput on the shard involved in the
* request, PutRecord throws
* ProvisionedThroughputExceededException .
*
*
* Data records are accessible for only 24 hours from the time that they
* are added to an Amazon Kinesis stream.
*
*
* @param streamName The name of the stream to put the data record into.
* @param data The data blob to put into the record, which is
* base64-encoded when the blob is serialized. The maximum size of the
* data blob (the payload before base64-encoding) is 50 kilobytes (KB)
* @param partitionKey Determines which shard in the stream the data
* record is assigned to. Partition keys are Unicode strings with a
* maximum length limit of 256 bytes. Amazon Kinesis uses the partition
* key as input to a hash function that maps the partition key and
* associated data to a specific shard. Specifically, an MD5 hash
* function is used to map partition keys to 128-bit integer values and
* to map associated data records to shards. As a result of this hashing
* mechanism, all data records with the same partition key will map to
* the same shard within the stream.
*
* @return The response from the PutRecord service method, as returned by
* AmazonKinesis.
*
* @throws ProvisionedThroughputExceededException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public PutRecordResult putRecord(String streamName, java.nio.ByteBuffer data, String partitionKey)
throws AmazonServiceException, AmazonClientException;
/**
*
* Puts (writes) a single data record from a producer into an Amazon
* Kinesis stream. Call PutRecord to send data from the
* producer into the Amazon Kinesis stream for real-time ingestion and
* subsequent processing, one record at a time. Each shard can support up
* to 1000 records written per second, up to a maximum total of 1 MB data
* written per second.
*
*
* You must specify the name of the stream that captures, stores, and
* transports the data; a partition key; and the data blob itself.
*
*
* The data blob can be any type of data; for example, a segment from a
* log file, geographic/location data, website clickstream data, and so
* on.
*
*
* The partition key is used by Amazon Kinesis to distribute data across
* shards. Amazon Kinesis segregates the data records that belong to a
* data stream into multiple shards, using the partition key associated
* with each data record to determine which shard a given data record
* belongs to.
*
*
* Partition keys are Unicode strings, with a maximum length limit of
* 256 bytes. An MD5 hash function is used to map partition keys to
* 128-bit integer values and to map associated data records to shards
* using the hash key ranges of the shards. You can override hashing the
* partition key to determine the shard by explicitly specifying a hash
* value using the ExplicitHashKey parameter. For more
* information, see
* Partition Key
* in the Amazon Kinesis Developer Guide .
*
*
* PutRecord returns the shard ID of where the data record
* was placed and the sequence number that was assigned to the data
* record.
*
*
* Sequence numbers generally increase over time. To guarantee strictly
* increasing ordering, use the SequenceNumberForOrdering
* parameter. For more information, see
* Sequence Number
* in the Amazon Kinesis Developer Guide .
*
*
* If a PutRecord request cannot be processed because of
* insufficient provisioned throughput on the shard involved in the
* request, PutRecord throws
* ProvisionedThroughputExceededException .
*
*
* Data records are accessible for only 24 hours from the time that they
* are added to an Amazon Kinesis stream.
*
*
* @param streamName The name of the stream to put the data record into.
* @param data The data blob to put into the record, which is
* base64-encoded when the blob is serialized. The maximum size of the
* data blob (the payload before base64-encoding) is 50 kilobytes (KB)
* @param partitionKey Determines which shard in the stream the data
* record is assigned to. Partition keys are Unicode strings with a
* maximum length limit of 256 bytes. Amazon Kinesis uses the partition
* key as input to a hash function that maps the partition key and
* associated data to a specific shard. Specifically, an MD5 hash
* function is used to map partition keys to 128-bit integer values and
* to map associated data records to shards. As a result of this hashing
* mechanism, all data records with the same partition key will map to
* the same shard within the stream.
* @param sequenceNumberForOrdering Guarantees strictly increasing
* sequence numbers, for puts from the same client and to the same
* partition key. Usage: set the SequenceNumberForOrdering
* of record n to the sequence number of record n-1 (as
* returned in the PutRecordResult when putting record
* n-1). If this parameter is not set, records will be coarsely
* ordered based on arrival time.
*
* @return The response from the PutRecord service method, as returned by
* AmazonKinesis.
*
* @throws ProvisionedThroughputExceededException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public PutRecordResult putRecord(String streamName, java.nio.ByteBuffer data, String partitionKey, String sequenceNumberForOrdering)
throws AmazonServiceException, AmazonClientException;
/**
*
* Creates a Amazon Kinesis stream. A stream captures and transports
* data records that are continuously emitted from different data sources
* or producers . Scale-out within an Amazon Kinesis stream is
* explicitly supported by means of shards, which are uniquely identified
* groups of data records in an Amazon Kinesis stream.
*
*
* You specify and control the number of shards that a stream is
* composed of. Each open shard can support up to 5 read transactions per
* second, up to a maximum total of 2 MB of data read per second. Each
* shard can support up to 1000 records written per second, up to a
* maximum total of 1 MB data written per second. You can add shards to a
* stream if the amount of data input increases and you can remove shards
* if the amount of data input decreases.
*
*
* The stream name identifies the stream. The name is scoped to the AWS
* account used by the application. It is also scoped by region. That is,
* two streams in two different accounts can have the same name, and two
* streams in the same account, but in two different regions, can have
* the same name.
*
*
* CreateStream is an asynchronous operation. Upon
* receiving a CreateStream request, Amazon Kinesis
* immediately returns and sets the stream status to
* CREATING . After the stream is created, Amazon Kinesis
* sets the stream status to ACTIVE . You should perform
* read and write operations only on an ACTIVE stream.
*
*
* You receive a LimitExceededException when making a
* CreateStream request if you try to do one of the
* following:
*
*
*
* - Have more than five streams in the
CREATING state at
* any point in time.
* - Create more shards than are authorized for your account.
*
*
*
* The default limit for an AWS account is 10 shards per stream. If you
* need to create a stream with more than 10 shards,
* contact AWS Support
* to increase the limit on your account.
*
*
* You can use DescribeStream to check the stream status,
* which is returned in StreamStatus .
*
*
* CreateStream has a limit of 5 transactions per second
* per account.
*
*
* @param streamName A name to identify the stream. The stream name is
* scoped to the AWS account used by the application that creates the
* stream. It is also scoped by region. That is, two streams in two
* different AWS accounts can have the same name, and two streams in the
* same AWS account, but in two different regions, can have the same
* name.
* @param shardCount The number of shards that the stream will use. The
* throughput of the stream is a function of the number of shards; more
* shards are required for greater provisioned throughput.
* Note: The default limit for an AWS account is 10 shards per
* stream. If you need to create a stream with more than 10 shards, contact
* AWS Support to increase the limit on your account.
*
* @return The response from the CreateStream service method, as returned
* by AmazonKinesis.
*
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws InvalidArgumentException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void createStream(String streamName, Integer shardCount)
throws AmazonServiceException, AmazonClientException;
/**
*
* Deletes a stream and all its shards and data. You must shut down any
* applications that are operating on the stream before you delete the
* stream. If an application attempts to operate on a deleted stream, it
* will receive the exception ResourceNotFoundException .
*
*
* If the stream is in the ACTIVE state, you can delete it.
* After a DeleteStream request, the specified stream is in
* the DELETING state until Amazon Kinesis completes the
* deletion.
*
*
* Note: Amazon Kinesis might continue to accept data read and
* write operations, such as PutRecord, PutRecords, and GetRecords, on a
* stream in the DELETING state until the stream deletion is
* complete.
*
*
* When you delete a stream, any shards in that stream are also deleted,
* and any tags are dissociated from the stream.
*
*
* You can use the DescribeStream operation to check the state of the
* stream, which is returned in StreamStatus .
*
*
* DeleteStream has a limit of 5 transactions per second
* per account.
*
*
* @param streamName The name of the stream to delete.
*
* @return The response from the DeleteStream service method, as returned
* by AmazonKinesis.
*
* @throws LimitExceededException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void deleteStream(String streamName)
throws AmazonServiceException, AmazonClientException;
/**
*
* Merges two adjacent shards in a stream and combines them into a
* single shard to reduce the stream's capacity to ingest and transport
* data. Two shards are considered adjacent if the union of the hash key
* ranges for the two shards form a contiguous set with no gaps. For
* example, if you have two shards, one with a hash key range of
* 276...381 and the other with a hash key range of 382...454, then you
* could merge these two shards into a single shard that would have a
* hash key range of 276...454. After the merge, the single child shard
* receives data for all hash key values covered by the two parent
* shards.
*
*
* MergeShards is called when there is a need to reduce the
* overall capacity of a stream because of excess capacity that is not
* being used. You must specify the shard to be merged and the adjacent
* shard for a stream. For more information about merging shards, see
* Merge Two Shards
* in the Amazon Kinesis Developer Guide .
*
*
* If the stream is in the ACTIVE state, you can call
* MergeShards . If a stream is in the CREATING
* , UPDATING , or DELETING state,
* MergeShards returns a ResourceInUseException
* . If the specified stream does not exist, MergeShards
* returns a ResourceNotFoundException .
*
*
* You can use DescribeStream to check the state of the stream, which is
* returned in StreamStatus .
*
*
* MergeShards is an asynchronous operation. Upon receiving
* a MergeShards request, Amazon Kinesis immediately returns
* a response and sets the StreamStatus to
* UPDATING . After the operation is completed, Amazon
* Kinesis sets the StreamStatus to ACTIVE .
* Read and write operations continue to work while the stream is in the
* UPDATING state.
*
*
* You use DescribeStream to determine the shard IDs that are specified
* in the MergeShards request.
*
*
* If you try to operate on too many streams in parallel using
* CreateStream, DeleteStream, MergeShards or SplitShard,
* you will receive a LimitExceededException .
*
*
* MergeShards has limit of 5 transactions per second per
* account.
*
*
* @param streamName The name of the stream for the merge.
* @param shardToMerge The shard ID of the shard to combine with the
* adjacent shard for the merge.
* @param adjacentShardToMerge The shard ID of the adjacent shard for the
* merge.
*
* @return The response from the MergeShards service method, as returned
* by AmazonKinesis.
*
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void mergeShards(String streamName, String shardToMerge, String adjacentShardToMerge)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified stream.
*
*
* The information about the stream includes its current status, its
* Amazon Resource Name (ARN), and an array of shard objects. For each
* shard object, there is information about the hash key and sequence
* number ranges that the shard spans, and the IDs of any earlier shards
* that played in a role in creating the shard. A sequence number is the
* identifier associated with every record ingested in the Amazon Kinesis
* stream. The sequence number is assigned when a record is put into the
* stream.
*
*
* You can limit the number of returned shards using the
* Limit parameter. The number of shards in a stream may be
* too large to return from a single call to DescribeStream
* . You can detect this by using the HasMoreShards flag in
* the returned output. HasMoreShards is set to
* true when there is more data available.
*
*
* DescribeStream is a paginated operation. If there are
* more shards available, you can request them using the shard ID of the
* last shard returned. Specify this ID in the
* ExclusiveStartShardId parameter in a subsequent request
* to DescribeStream .
*
*
* DescribeStream has a limit of 10 transactions per second
* per account.
*
*
* @param streamName The name of the stream to describe.
*
* @return The response from the DescribeStream service method, as
* returned by AmazonKinesis.
*
* @throws LimitExceededException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeStreamResult describeStream(String streamName)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified stream.
*
*
* The information about the stream includes its current status, its
* Amazon Resource Name (ARN), and an array of shard objects. For each
* shard object, there is information about the hash key and sequence
* number ranges that the shard spans, and the IDs of any earlier shards
* that played in a role in creating the shard. A sequence number is the
* identifier associated with every record ingested in the Amazon Kinesis
* stream. The sequence number is assigned when a record is put into the
* stream.
*
*
* You can limit the number of returned shards using the
* Limit parameter. The number of shards in a stream may be
* too large to return from a single call to DescribeStream
* . You can detect this by using the HasMoreShards flag in
* the returned output. HasMoreShards is set to
* true when there is more data available.
*
*
* DescribeStream is a paginated operation. If there are
* more shards available, you can request them using the shard ID of the
* last shard returned. Specify this ID in the
* ExclusiveStartShardId parameter in a subsequent request
* to DescribeStream .
*
*
* DescribeStream has a limit of 10 transactions per second
* per account.
*
*
* @param streamName The name of the stream to describe.
* @param exclusiveStartShardId The shard ID of the shard to start with.
*
* @return The response from the DescribeStream service method, as
* returned by AmazonKinesis.
*
* @throws LimitExceededException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeStreamResult describeStream(String streamName, String exclusiveStartShardId)
throws AmazonServiceException, AmazonClientException;
/**
*
* Describes the specified stream.
*
*
* The information about the stream includes its current status, its
* Amazon Resource Name (ARN), and an array of shard objects. For each
* shard object, there is information about the hash key and sequence
* number ranges that the shard spans, and the IDs of any earlier shards
* that played in a role in creating the shard. A sequence number is the
* identifier associated with every record ingested in the Amazon Kinesis
* stream. The sequence number is assigned when a record is put into the
* stream.
*
*
* You can limit the number of returned shards using the
* Limit parameter. The number of shards in a stream may be
* too large to return from a single call to DescribeStream
* . You can detect this by using the HasMoreShards flag in
* the returned output. HasMoreShards is set to
* true when there is more data available.
*
*
* DescribeStream is a paginated operation. If there are
* more shards available, you can request them using the shard ID of the
* last shard returned. Specify this ID in the
* ExclusiveStartShardId parameter in a subsequent request
* to DescribeStream .
*
*
* DescribeStream has a limit of 10 transactions per second
* per account.
*
*
* @param streamName The name of the stream to describe.
* @param limit The maximum number of shards to return.
* @param exclusiveStartShardId The shard ID of the shard to start with.
*
* @return The response from the DescribeStream service method, as
* returned by AmazonKinesis.
*
* @throws LimitExceededException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public DescribeStreamResult describeStream(String streamName, Integer limit, String exclusiveStartShardId)
throws AmazonServiceException, AmazonClientException;
/**
*
* Gets a shard iterator. A shard iterator expires five minutes after it
* is returned to the requester.
*
*
* A shard iterator specifies the position in the shard from which to
* start reading data records sequentially. A shard iterator specifies
* this position using the sequence number of a data record in a shard. A
* sequence number is the identifier associated with every record
* ingested in the Amazon Kinesis stream. The sequence number is assigned
* when a record is put into the stream.
*
*
* You must specify the shard iterator type. For example, you can set
* the ShardIteratorType parameter to read exactly from the
* position denoted by a specific sequence number by using the
* AT_SEQUENCE_NUMBER shard iterator type, or right after
* the sequence number by using the AFTER_SEQUENCE_NUMBER
* shard iterator type, using sequence numbers returned by earlier calls
* to PutRecord, PutRecords, GetRecords, or DescribeStream. You can
* specify the shard iterator type TRIM_HORIZON in the
* request to cause ShardIterator to point to the last
* untrimmed record in the shard in the system, which is the oldest data
* record in the shard. Or you can point to just after the most recent
* record in the shard, by using the shard iterator type
* LATEST , so that you always read the most recent data in
* the shard.
*
*
* When you repeatedly read from an Amazon Kinesis stream use a
* GetShardIterator request to get the first shard iterator to to use in
* your first GetRecords request and then use the shard
* iterator returned by the GetRecords request in
* NextShardIterator for subsequent reads. A new shard
* iterator is returned by every GetRecords request in
* NextShardIterator , which you use in the
* ShardIterator parameter of the next
* GetRecords request.
*
*
* If a GetShardIterator request is made too often, you
* receive a ProvisionedThroughputExceededException . For
* more information about throughput limits, see GetRecords.
*
*
* If the shard is closed, the iterator can't return more data, and
* GetShardIterator returns null for its
* ShardIterator . A shard can be closed using SplitShard or
* MergeShards.
*
*
* GetShardIterator has a limit of 5 transactions per
* second per account per open shard.
*
*
* @param streamName The name of the stream.
* @param shardId The shard ID of the shard to get the iterator for.
* @param shardIteratorType Determines how the shard iterator is used to
* start reading data records from the shard. The following are the
* valid shard iterator types:
- AT_SEQUENCE_NUMBER - Start
* reading exactly from the position denoted by a specific sequence
* number.
- AFTER_SEQUENCE_NUMBER - Start reading right after the
* position denoted by a specific sequence number.
- TRIM_HORIZON
* - Start reading at the last untrimmed record in the shard in the
* system, which is the oldest data record in the shard.
- LATEST
* - Start reading just after the most recent record in the shard, so
* that you always read the most recent data in the shard.
*
* @return The response from the GetShardIterator service method, as
* returned by AmazonKinesis.
*
* @throws ProvisionedThroughputExceededException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetShardIteratorResult getShardIterator(String streamName, String shardId, String shardIteratorType)
throws AmazonServiceException, AmazonClientException;
/**
*
* Gets a shard iterator. A shard iterator expires five minutes after it
* is returned to the requester.
*
*
* A shard iterator specifies the position in the shard from which to
* start reading data records sequentially. A shard iterator specifies
* this position using the sequence number of a data record in a shard. A
* sequence number is the identifier associated with every record
* ingested in the Amazon Kinesis stream. The sequence number is assigned
* when a record is put into the stream.
*
*
* You must specify the shard iterator type. For example, you can set
* the ShardIteratorType parameter to read exactly from the
* position denoted by a specific sequence number by using the
* AT_SEQUENCE_NUMBER shard iterator type, or right after
* the sequence number by using the AFTER_SEQUENCE_NUMBER
* shard iterator type, using sequence numbers returned by earlier calls
* to PutRecord, PutRecords, GetRecords, or DescribeStream. You can
* specify the shard iterator type TRIM_HORIZON in the
* request to cause ShardIterator to point to the last
* untrimmed record in the shard in the system, which is the oldest data
* record in the shard. Or you can point to just after the most recent
* record in the shard, by using the shard iterator type
* LATEST , so that you always read the most recent data in
* the shard.
*
*
* When you repeatedly read from an Amazon Kinesis stream use a
* GetShardIterator request to get the first shard iterator to to use in
* your first GetRecords request and then use the shard
* iterator returned by the GetRecords request in
* NextShardIterator for subsequent reads. A new shard
* iterator is returned by every GetRecords request in
* NextShardIterator , which you use in the
* ShardIterator parameter of the next
* GetRecords request.
*
*
* If a GetShardIterator request is made too often, you
* receive a ProvisionedThroughputExceededException . For
* more information about throughput limits, see GetRecords.
*
*
* If the shard is closed, the iterator can't return more data, and
* GetShardIterator returns null for its
* ShardIterator . A shard can be closed using SplitShard or
* MergeShards.
*
*
* GetShardIterator has a limit of 5 transactions per
* second per account per open shard.
*
*
* @param streamName The name of the stream.
* @param shardId The shard ID of the shard to get the iterator for.
* @param shardIteratorType Determines how the shard iterator is used to
* start reading data records from the shard. The following are the
* valid shard iterator types:
- AT_SEQUENCE_NUMBER - Start
* reading exactly from the position denoted by a specific sequence
* number.
- AFTER_SEQUENCE_NUMBER - Start reading right after the
* position denoted by a specific sequence number.
- TRIM_HORIZON
* - Start reading at the last untrimmed record in the shard in the
* system, which is the oldest data record in the shard.
- LATEST
* - Start reading just after the most recent record in the shard, so
* that you always read the most recent data in the shard.
* @param startingSequenceNumber The sequence number of the data record
* in the shard from which to start reading from.
*
* @return The response from the GetShardIterator service method, as
* returned by AmazonKinesis.
*
* @throws ProvisionedThroughputExceededException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public GetShardIteratorResult getShardIterator(String streamName, String shardId, String shardIteratorType, String startingSequenceNumber)
throws AmazonServiceException, AmazonClientException;
/**
*
* Splits a shard into two new shards in the stream, to increase the
* stream's capacity to ingest and transport data.
* SplitShard is called when there is a need to increase the
* overall capacity of stream because of an expected increase in the
* volume of data records being ingested.
*
*
* You can also use SplitShard when a shard appears to be
* approaching its maximum utilization, for example, when the set of
* producers sending data into the specific shard are suddenly sending
* more than previously anticipated. You can also call
* SplitShard to increase stream capacity, so that more
* Amazon Kinesis applications can simultaneously read data from the
* stream for real-time processing.
*
*
* You must specify the shard to be split and the new hash key, which is
* the position in the shard where the shard gets split in two. In many
* cases, the new hash key might simply be the average of the beginning
* and ending hash key, but it can be any hash key value in the range
* being mapped into the shard. For more information about splitting
* shards, see
* Split a Shard
* in the Amazon Kinesis Developer Guide .
*
*
* You can use DescribeStream to determine the shard ID and hash key
* values for the ShardToSplit and
* NewStartingHashKey parameters that are specified in the
* SplitShard request.
*
*
* SplitShard is an asynchronous operation. Upon receiving
* a SplitShard request, Amazon Kinesis immediately returns
* a response and sets the stream status to UPDATING . After
* the operation is completed, Amazon Kinesis sets the stream status to
* ACTIVE . Read and write operations continue to work while
* the stream is in the UPDATING state.
*
*
* You can use DescribeStream to check the status of the
* stream, which is returned in StreamStatus . If the stream
* is in the ACTIVE state, you can call
* SplitShard . If a stream is in CREATING or
* UPDATING or DELETING states,
* DescribeStream returns a
* ResourceInUseException .
*
*
* If the specified stream does not exist, DescribeStream
* returns a ResourceNotFoundException . If you try to
* create more shards than are authorized for your account, you receive a
* LimitExceededException .
*
*
* The default limit for an AWS account is 10 shards per stream. If you
* need to create a stream with more than 10 shards,
* contact AWS Support
* to increase the limit on your account.
*
*
* If you try to operate on too many streams in parallel using
* CreateStream, DeleteStream, MergeShards or SplitShard, you receive a
* LimitExceededException .
*
*
* SplitShard has limit of 5 transactions per second per
* account.
*
*
* @param streamName The name of the stream for the shard split.
* @param shardToSplit The shard ID of the shard to split.
* @param newStartingHashKey A hash key value for the starting hash key
* of one of the child shards created by the split. The hash key range
* for a given shard constitutes a set of ordered contiguous positive
* integers. The value for NewStartingHashKey must be in the
* range of hash keys being mapped into the shard. The
* NewStartingHashKey hash key value and all higher hash key
* values in hash key range are distributed to one of the child shards.
* All the lower hash key values in the range are distributed to the
* other child shard.
*
* @return The response from the SplitShard service method, as returned
* by AmazonKinesis.
*
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws ResourceNotFoundException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public void splitShard(String streamName, String shardToSplit, String newStartingHashKey)
throws AmazonServiceException, AmazonClientException;
/**
*
* Lists your streams.
*
*
* The number of streams may be too large to return from a single call
* to ListStreams . You can limit the number of returned
* streams using the Limit parameter. If you do not specify
* a value for the Limit parameter, Amazon Kinesis uses the
* default limit, which is currently 10.
*
*
* You can detect if there are more streams available to list by using
* the HasMoreStreams flag from the returned output. If
* there are more streams available, you can request more streams by
* using the name of the last stream returned by the
* ListStreams request in the
* ExclusiveStartStreamName parameter in a subsequent
* request to ListStreams . The group of stream names
* returned by the subsequent request is then added to the list. You can
* continue this process until all the stream names have been collected
* in the list.
*
*
* ListStreams has a limit of 5 transactions per second per
* account.
*
*
* @param exclusiveStartStreamName The name of the stream to start the
* list with.
*
* @return The response from the ListStreams service method, as returned
* by AmazonKinesis.
*
* @throws LimitExceededException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public ListStreamsResult listStreams(String exclusiveStartStreamName)
throws AmazonServiceException, AmazonClientException;
/**
*
* Lists your streams.
*
*
* The number of streams may be too large to return from a single call
* to ListStreams . You can limit the number of returned
* streams using the Limit parameter. If you do not specify
* a value for the Limit parameter, Amazon Kinesis uses the
* default limit, which is currently 10.
*
*
* You can detect if there are more streams available to list by using
* the HasMoreStreams flag from the returned output. If
* there are more streams available, you can request more streams by
* using the name of the last stream returned by the
* ListStreams request in the
* ExclusiveStartStreamName parameter in a subsequent
* request to ListStreams . The group of stream names
* returned by the subsequent request is then added to the list. You can
* continue this process until all the stream names have been collected
* in the list.
*
*
* ListStreams has a limit of 5 transactions per second per
* account.
*
*
* @param limit The maximum number of streams to list.
* @param exclusiveStartStreamName The name of the stream to start the
* list with.
*
* @return The response from the ListStreams service method, as returned
* by AmazonKinesis.
*
* @throws LimitExceededException
*
* @throws AmazonClientException
* If any internal errors are encountered inside the client while
* attempting to make the request or handle the response. For example
* if a network connection is not available.
* @throws AmazonServiceException
* If an error response is returned by AmazonKinesis indicating
* either a problem with the data in the request, or a server side issue.
*/
public ListStreamsResult listStreams(Integer limit, String exclusiveStartStreamName)
throws AmazonServiceException, AmazonClientException;
/**
* Shuts down this client object, releasing any resources that might be held
* open. This is an optional method, and callers are not expected to call
* it, but can if they want to explicitly release any open resources. Once a
* client has been shutdown, it should not be used to make any more
* requests.
*/
public void shutdown();
/**
* Returns additional metadata for a previously executed successful request, typically used for
* debugging issues where a service isn't acting as expected. This data isn't considered part
* of the result data returned by an operation, so it's available through this separate,
* diagnostic interface.
*
* Response metadata is only cached for a limited period of time, so if you need to access
* this extra diagnostic information for an executed request, you should use this method
* to retrieve it as soon as possible after executing a request.
*
* @param request
* The originally executed request.
*
* @return The response metadata for the specified request, or null if none
* is available.
*/
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request);
}