com.amazonaws.services.s3.model.PutObjectRequest Maven / Gradle / Ivy
Show all versions of aws-sdk-android Show documentation
/*
* Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.s3.model;
import java.io.File;
import java.io.InputStream;
import com.amazonaws.AmazonWebServiceRequest;
import com.amazonaws.event.ProgressListener;
/**
*
* Uploads a new object to the specified Amazon S3 bucket.
* The PutObjectRequest optionally uploads object metadata
* and applies a canned access
* control policy to the new object.
*
*
* Amazon S3 never stores partial objects;
* if during this call an exception wasn't thrown,
* the entire object was stored.
*
*
* Depending on whether a file or input stream is being uploaded, this
* request has slightly different behavior.
*
*
* When uploading a file:
*
*
* -
* The client automatically computes a checksum of the file.
* Amazon S3 uses checksums to validate the data in each file.
*
* -
* Using the file extension, Amazon S3 attempts to determine
* the correct content type and content disposition to use
* for the object.
*
*
*
* When uploading directly from an input stream, content length must be specified before data can be uploaded
* to Amazon S3. If not provided, the library will have
* to buffer the contents of the input stream in order to calculate it.
* Amazon S3 explicitly requires that the content length be sent in
* the request headers before any of the data is sent.
*
* Amazon S3 is a distributed system. If
* Amazon S3 receives multiple write requests for the same object nearly
* simultaneously, all of the objects might be stored. However, only one object
* will obtain the key.
*
*
* Note: Amazon S3 does not provide object locking; if this is needed, make
* sure to build it into the application layer.
*
*
* If the caller specifies a location constraint when creating a bucket,
* all objects added to the bucket are stored in the same region as the bucket.
* For example, if specifying a Europe (EU) region constraint for a bucket,
* all of that bucket's objects are stored in the EU region.
*
*
* The specified bucket must already exist and the caller must have
* {@link Permission#Write} permission to the bucket to upload an object.
*
*
* @see PutObjectRequest#PutObjectRequest(String, String, File)
* @see PutObjectRequest#PutObjectRequest(String, String, InputStream, ObjectMetadata)
*/
public class PutObjectRequest extends AmazonWebServiceRequest implements Cloneable {
/**
* The name of an existing bucket, to which this request will upload a new
* object. You must have {@link Permission#Write} permission granted to you
* in order to upload new objects to a bucket.
*/
private String bucketName;
/**
* The key under which to store the new object.
*/
private String key;
/**
* The file containing the data to be uploaded to Amazon S3. You must either
* specify a file or an InputStream containing the data to be uploaded to
* Amazon S3.
*/
private File file;
/**
* The InputStream containing the data to be uploaded to Amazon S3. You must
* either specify a file or an InputStream containing the data to be
* uploaded to Amazon S3.
*/
private InputStream inputStream;
/**
* Optional metadata instructing Amazon S3 how to handle the uploaded data
* (e.g. custom user metadata, hooks for specifying content type, etc.). If
* you are uploading from an InputStream, you should always
* specify metadata with the content size set, otherwise the contents of the
* InputStream will have to be buffered in memory before they can be sent to
* Amazon S3, which can have very negative performance impacts.
*/
private ObjectMetadata metadata;
/**
* An optional pre-configured access control policy to use for the new
* object. Ignored in favor of accessControlList, if present.
*/
private CannedAccessControlList cannedAcl;
/**
* An optional access control list to apply to the new object. If specified,
* cannedAcl will be ignored.
*/
private AccessControlList accessControlList;
/**
* The optional Amazon S3 storage class to use when storing the new object.
* If not specified, the default, standard storage class will be used.
*
* For more information on Amazon S3 storage classes and available values,
* see the {@link StorageClass} enumeration.
*/
private String storageClass;
/**
* The optional progress listener for receiving updates about object download
* status.
*/
private ProgressListener generalProgressListener;
/** The optional redirect location about an object */
private String redirectLocation;
/**
* The optional customer-provided server-side encryption key to use to
* encrypt the uploaded object.
*/
private SSECustomerKey sseCustomerKey;
/**
* Constructs a new
* {@link PutObjectRequest} object to upload a file to the
* specified bucket and key. After constructing the request,
* users may optionally specify object metadata or a canned ACL as well.
*
* @param bucketName
* The name of an existing bucket to which the new object will be
* uploaded.
* @param key
* The key under which to store the new object.
* @param file
* The path of the file to upload to Amazon S3.
*
* @see PutObjectRequest#PutObjectRequest(String, String, InputStream, ObjectMetadata)
* @See PutObjectRequest(String bucketName, String key, String redirectLocation)
*/
public PutObjectRequest(String bucketName, String key, File file) {
this.bucketName = bucketName;
this.key = key;
this.file = file;
}
/**
* Constructs a new {@link PutObjectRequest} object with redirect location.
* After constructing the request, users may optionally specify object
* metadata or a canned ACL as well.
*
* @param bucketName
* The name of an existing bucket to which the new object will be
* uploaded.
* @param key
* The key under which to store the new object.
* @param redirectLocation
* The redirect location of this new object.
*
* @see PutObjectRequest#PutObjectRequest(String, String, InputStream, ObjectMetadata)
* @see PutObjectRequest#PutObjectRequest(String, String, File)
*/
public PutObjectRequest(String bucketName, String key, String redirectLocation) {
this.bucketName = bucketName;
this.key = key;
this.redirectLocation = redirectLocation;
}
/**
* Constructs a new
* {@link PutObjectRequest} object to upload a stream of data to
* the specified bucket and key. After constructing the request,
* users may optionally specify object metadata or a canned ACL as well.
*
* Content length for the data stream must be
* specified in the object metadata parameter; Amazon S3 requires it
* be passed in before the data is uploaded. Failure to specify a content
* length will cause the entire contents of the input stream to be buffered
* locally in memory so that the content length can be calculated, which can
* result in negative performance problems.
*
*
* @param bucketName
* The name of an existing bucket to which the new object will be
* uploaded.
* @param key
* The key under which to store the new object.
* @param input
* The stream of data to upload to Amazon S3.
* @param metadata
* The object metadata. At minimum this specifies the
* content length for the stream of data being uploaded.
*
* @see PutObjectRequest#PutObjectRequest(String, String, File)
* @see PutObjectRequest(String bucketName, String key, String redirectLocation)
*/
public PutObjectRequest(String bucketName, String key, InputStream input, ObjectMetadata metadata) {
this.bucketName = bucketName;
this.key = key;
this.inputStream = input;
this.metadata = metadata;
}
/**
* Gets the name of the existing bucket where this request will
* upload a new object to.
* In order to upload the object,
* users must have {@link Permission#Write} permission granted.
*
* @return The name of an existing bucket where this request will
* upload a new object to.
*
* @see PutObjectRequest#setBucketName(String)
* @see PutObjectRequest#withBucketName(String)
*/
public String getBucketName() {
return bucketName;
}
/**
* Sets the name of an existing bucket where this request will
* upload a new object to. In order to upload the object,
* users must have {@link Permission#Write} permission granted.
*
* @param bucketName
* The name of an existing bucket where this request will
* upload a new object to.
* In order to upload the object,
* users must have {@link Permission#Write} permission granted.
*
* @see PutObjectRequest#getBucketName()
* @see PutObjectRequest#withBucketName(String)
*/
public void setBucketName(String bucketName) {
this.bucketName = bucketName;
}
/**
* Sets the name of the bucket where this request will upload a new
* object to. Returns this object, enabling additional method calls to be
* chained together.
*
* In order to upload the object,
* users must have {@link Permission#Write} permission granted.
*
* @param bucketName
* The name of an existing bucket where this request will
* upload a new object to.
* In order to upload the object,
* users must have {@link Permission#Write} permission granted.
*
* @return This {@link PutObjectRequest}, enabling additional method calls to be
* chained together.
*
* @see PutObjectRequest#getBucketName()
* @see PutObjectRequest#setBucketName(String)
*/
public PutObjectRequest withBucketName(String bucketName) {
setBucketName(bucketName);
return this;
}
/**
* Gets the key under which to store the new object.
*
* @return The key under which to store the new object.
*
* @see PutObjectRequest#setKey(String)
* @see PutObjectRequest#withKey(String)
*/
public String getKey() {
return key;
}
/**
* Sets the key under which to store the new object.
*
* @param key
* The key under which to store the new object.
*
* @see PutObjectRequest#getKey()
* @see PutObjectRequest#withKey(String)
*/
public void setKey(String key) {
this.key = key;
}
/**
* Sets the key under which to store the new object. Returns this object,
* enabling additional method calls to be chained together.
*
* @param key
* The key under which to store the new object.
*
* @return This {@link PutObjectRequest}, enabling additional method calls to be
* chained together.
*
* @see PutObjectRequest#getKey()
* @see PutObjectRequest#setKey(String)
*/
public PutObjectRequest withKey(String key) {
setKey(key);
return this;
}
/**
* Gets the optional Amazon S3 storage class to use when storing the new
* object. If not specified, the default standard storage class is
* used when storing the object.
*
* For more information on available Amazon S3 storage classes, see the
* {@link StorageClass} enumeration.
*
*
* @return The Amazon S3 storage class to use when storing the newly copied
* object.
*
* @see PutObjectRequest#setStorageClass(String)
* @see PutObjectRequest#setStorageClass(StorageClass)
* @see PutObjectRequest#withStorageClass(StorageClass)
* @see PutObjectRequest#withStorageClass(String)
*/
public String getStorageClass() {
return storageClass;
}
/**
* Sets the optional Amazon S3 storage class to use when storing the new
* object. If not specified, the default standard storage class will be
* used when storing the new object.
*
* For more information on Amazon S3 storage classes and available values,
* see the {@link StorageClass} enumeration.
*
*
* @param storageClass
* The storage class to use when storing the new object.
*
* @return The Amazon S3 storage class to use when storing the newly copied
* object.
*
* @see PutObjectRequest#getStorageClass()
* @see PutObjectRequest#setStorageClass(StorageClass
* @see PutObjectRequest#withStorageClass(StorageClass)
* @see PutObjectRequest#withStorageClass(String)
*/
public void setStorageClass(String storageClass) {
this.storageClass = storageClass;
}
/**
* Sets the optional Amazon S3 storage class to use when storing the new
* object. Returns this {@link PutObjectRequest}, enabling additional method
* calls to be chained together. If not specified, the default standard
* storage class will be used when storing the object.
*
* For more information on Amazon S3 storage classes and available values,
* see the {@link StorageClass} enumeration.
*
*
* @param storageClass
* The storage class to use when storing the new object.
*
* @return This {@link PutObjectRequest}, enabling additional method calls to be
* chained together.
*
* @see PutObjectRequest#getStorageClass()
* @see PutObjectRequest#setStorageClass(StorageClass)
* @see PutObjectRequest#setStorageClass(String)
* @see PutObjectRequest#withStorageClass(StorageClass)
*/
public PutObjectRequest withStorageClass(String storageClass) {
setStorageClass(storageClass);
return this;
}
/**
* Sets the optional Amazon S3 storage class to use when storing the new
* object. If not specified, the default standard storage class will be
* used when storing the object.
*
* For more information on Amazon S3 storage classes and available values,
* see the {@link StorageClass} enumeration.
*
*
* @param storageClass
* The storage class to use when storing the new object.
*
* @return The Amazon S3 storage class to use when storing the newly copied
* object.
*
* @see PutObjectRequest#getStorageClass()
* @see PutObjectRequest#setStorageClass(String)
*/
public void setStorageClass(StorageClass storageClass) {
this.storageClass = storageClass.toString();
}
/**
* Sets the optional Amazon S3 storage class to use when storing the new
* object. Returns this {@link PutObjectRequest}, enabling additional method
* calls to be chained together. If not specified, the default standard
* storage class will be used when storing the object.
*
* For more information on Amazon S3 storage classes and available values,
* see the {@link StorageClass} enumeration.
*
*
* @param storageClass
* The storage class to use when storing the new object.
*
* @return This {@link PutObjectRequest}, enabling additional method calls to be
* chained together.
*
* @see PutObjectRequest#getStorageClass()
* @see PutObjectRequest#setStorageClass(StorageClass)
* @see PutObjectRequest#setStorageClass(String)
* @see PutObjectRequest#withStorageClass(String)
*/
public PutObjectRequest withStorageClass(StorageClass storageClass) {
setStorageClass(storageClass);
return this;
}
/**
* Gets the path and name of the file
* containing the data to be uploaded to Amazon S3.
* Either specify a file or an input stream containing the data to be
* uploaded to Amazon S3; both cannot be specified.
*
* @return The path and name of the file
* containing the data to be uploaded to Amazon S3.
*
* @see PutObjectRequest#setFile(File)
* @see PutObjectRequest#withFile(File)
* @see PutObjectRequest#setInputStream(InputStream)
* @see PutObjectRequest#withInputStream(InputStream)
*/
public File getFile() {
return file;
}
/**
* Sets the path and name of the file
* containing the data to be uploaded to Amazon S3.
* Either specify a file or an input stream containing the data to be
* uploaded to Amazon S3; both cannot be specified.
*
* @param file
* The path and name of the
* file containing the data to be uploaded to Amazon S3.
*
* @see PutObjectRequest#getFile()
* @see PutObjectRequest#withFile(File)
* @see PutObjectRequest#getInputStream()
* @see PutObjectRequest#withInputStream(InputStream)
*/
public void setFile(File file) {
this.file = file;
}
/**
* Sets the file containing the data to be uploaded to Amazon S3.
* Returns this {@link PutObjectRequest}, enabling additional method
* calls to be chained together.
*
* Either specify a file or an input stream containing the data to
* be uploaded to Amazon S3; both cannot be specified.
*
* @param file
* The file containing the data to be uploaded to Amazon S3.
*
* @return This {@link PutObjectRequest}, enabling additional method
* calls to be chained together.
*
* @see PutObjectRequest#getFile()
* @see PutObjectRequest#setFile(File)
* @see PutObjectRequest#getInputStream()
* @see PutObjectRequest#setInputStream(InputStream)
*/
public PutObjectRequest withFile(File file) {
setFile(file);
return this;
}
/**
* Gets the optional metadata instructing Amazon S3 how to handle the
* uploaded data (e.g. custom user metadata, hooks for specifying content
* type, etc.).
*
* If uploading from an input stream,
* always specify metadata with the content size set. Otherwise the
* contents of the input stream have to be buffered in memory before
* being sent to Amazon S3. This can cause very negative performance
* impacts.
*
*
* @return The optional metadata instructing Amazon S3 how to handle the
* uploaded data (e.g. custom user metadata, hooks for specifying
* content type, etc.).
*
* @see PutObjectRequest#setMetadata(ObjectMetadata)
* @see PutObjectRequest#withMetadata(ObjectMetadata)
*/
public ObjectMetadata getMetadata() {
return metadata;
}
/**
* Sets the optional metadata instructing Amazon S3 how to handle the
* uploaded data (e.g. custom user metadata, hooks for specifying content
* type, etc.).
*
* If uploading from an input stream,
* always specify metadata with the content size set. Otherwise the
* contents of the input stream have to be buffered in memory before
* being sent to Amazon S3. This can cause very negative performance
* impacts.
*
*
* @param metadata
* The optional metadata instructing Amazon S3 how to handle the
* uploaded data (e.g. custom user metadata, hooks for specifying
* content type, etc.).
*
* @see PutObjectRequest#getMetadata()
* @see PutObjectRequest#withMetadata(ObjectMetadata)
*/
public void setMetadata(ObjectMetadata metadata) {
this.metadata = metadata;
}
/**
* Sets the optional metadata instructing Amazon S3 how to handle the
* uploaded data (e.g. custom user metadata, hooks for specifying content
* type, etc.). Returns this {@link PutObjectRequest}, enabling additional method
* calls to be chained together.
*
* If uploading from an input stream,
* always specify metadata with the content size set. Otherwise the
* contents of the input stream have to be buffered in memory before
* being sent to Amazon S3. This can cause very negative performance
* impacts.
*
*
* @param metadata
* The optional metadata instructing Amazon S3 how to handle the
* uploaded data (e.g. custom user metadata, hooks for specifying
* content type, etc.).
*
* @return This {@link PutObjectRequest}, enabling additional method
* calls to be chained together.
*
* @see PutObjectRequest#getMetadata()
* @see PutObjectRequest#setMetadata(ObjectMetadata)
*/
public PutObjectRequest withMetadata(ObjectMetadata metadata) {
setMetadata(metadata);
return this;
}
/**
* Gets the optional pre-configured access control policy to use for the
* new object.
*
* @return The optional pre-configured access control policy to use for the
* new object.
*
* @see PutObjectRequest#setCannedAcl(CannedAccessControlList)
* @see PutObjectRequest#withCannedAcl(CannedAccessControlList)
*/
public CannedAccessControlList getCannedAcl() {
return cannedAcl;
}
/**
* Sets the optional pre-configured access control policy to use for the new
* object.
*
* @param cannedAcl
* The optional pre-configured access control policy to use for
* the new object.
*
* @see PutObjectRequest#getCannedAcl()
* @see PutObjectRequest#withCannedAcl(CannedAccessControlList)
*/
public void setCannedAcl(CannedAccessControlList cannedAcl) {
this.cannedAcl = cannedAcl;
}
/**
* Sets the optional pre-configured access control policy to use for the new
* object. Returns this {@link PutObjectRequest}, enabling additional method
* calls to be chained together.
*
* @param cannedAcl
* The optional pre-configured access control policy to use for
* the new object.
*
* @return This {@link PutObjectRequest}, enabling additional method
* calls to be chained together.
*
* @see PutObjectRequest#getCannedAcl()
* @see PutObjectRequest#setCannedAcl(CannedAccessControlList)
*/
public PutObjectRequest withCannedAcl(CannedAccessControlList cannedAcl) {
setCannedAcl(cannedAcl);
return this;
}
/**
* Returns the optional access control list for the new object. If
* specified, cannedAcl will be ignored.
*/
public AccessControlList getAccessControlList() {
return accessControlList;
}
/**
* Sets the optional access control list for the new object. If specified,
* cannedAcl will be ignored.
*
* @param accessControlList
* The access control list for the new object.
*/
public void setAccessControlList(AccessControlList accessControlList) {
this.accessControlList = accessControlList;
}
/**
* Sets the optional access control list for the new object. If specified,
* cannedAcl will be ignored. Returns this {@link PutObjectRequest},
* enabling additional method calls to be chained together.
*
* @param accessControlList
* The access control list for the new object.
*/
public PutObjectRequest withAccessControlList(AccessControlList accessControlList) {
setAccessControlList(accessControlList);
return this;
}
/**
* Gets the input stream containing the data to be uploaded to Amazon S3.
* The user of this request
* must either specify a file or an input stream containing the data to be
* uploaded to Amazon S3; both cannot be specified.
*
* @return The input stream containing the data to be uploaded to Amazon S3.
* Either specify a file or an input stream containing the
* data to be uploaded to Amazon S3, not both.
*
* @see PutObjectRequest#setInputStream(InputStream)
* @see PutObjectRequest#withInputStream(InputStream)
* @see PutObjectRequest#setFile(File)
* @see PutObjectRequest#withFile(File)
*/
public InputStream getInputStream() {
return inputStream;
}
/**
* Sets the input stream containing the data to be uploaded to Amazon S3.
* Either specify a file or an input stream containing the data to be
* uploaded to Amazon S3; both cannot be specified.
*
* @param inputStream
* The input stream containing the data to be uploaded to Amazon
* S3. Either specify a file or an input stream containing the
* data to be uploaded to Amazon S3, not both.
*
* @see PutObjectRequest#getInputStream()
* @see PutObjectRequest#withInputStream(InputStream)
* @see PutObjectRequest#getFile()
* @see PutObjectRequest#withFile(File)
*/
public void setInputStream(InputStream inputStream) {
this.inputStream = inputStream;
}
/**
* Sets the input stream containing the data to be uploaded to Amazon S3.
* Returns this {@link PutObjectRequest}, enabling additional method
* calls to be chained together.
*
* Either specify a file or an input stream containing the data to be
* uploaded to Amazon S3; both cannot be specified.
*
*
* @param inputStream
* The InputStream containing the data to be uploaded to Amazon
* S3.
*
* @return This PutObjectRequest, so that additional method calls can be
* chained together.
*
* @see PutObjectRequest#getInputStream()
* @see PutObjectRequest#setInputStream(InputStream)
* @see PutObjectRequest#getFile()
* @see PutObjectRequest#setFile(File)
*/
public PutObjectRequest withInputStream(InputStream inputStream) {
setInputStream(inputStream);
return this;
}
/**
* Sets the optional redirect location for the new object.
*
* @param redirectLocation
* The redirect location for the new object.
*/
public void setRedirectLocation(String redirectLocation) {
this.redirectLocation = redirectLocation;
}
/**
* Gets the optional redirect location for the new object.
*/
public String getRedirectLocation() {
return this.redirectLocation;
}
/**
* Sets the optional redirect location for the new object.Returns this
* {@link PutObjectRequest}, enabling additional method calls to be chained
* together.
* @param redirectLocation
* The redirect location for the new object.
*/
public PutObjectRequest withRedirectLocation(String redirectLocation) {
this.redirectLocation = redirectLocation;
return this;
}
/**
* Returns the optional customer-provided server-side encryption key to use
* to encrypt the uploaded object.
*
* @return The optional customer-provided server-side encryption key to use
* to encrypt the uploaded object.
*/
public SSECustomerKey getSSECustomerKey() {
return sseCustomerKey;
}
/**
* Sets the optional customer-provided server-side encryption key to use to
* encrypt the uploaded object.
*
* @param sseKey
* The optional customer-provided server-side encryption key to
* use to encrypt the uploaded object.
*/
public void setSSECustomerKey(SSECustomerKey sseKey) {
this.sseCustomerKey = sseKey;
}
/**
* Sets the optional customer-provided server-side encryption key to use to
* encrypt the uploaded object, and returns the updated request object so
* that additional method calls can be chained together.
*
* @param sseKey
* The optional customer-provided server-side encryption key to
* use to encrypt the uploaded object.
*
* @return This updated request object so that additional method calls can
* be chained together.
*/
public PutObjectRequest withSSECustomerKey(SSECustomerKey sseKey) {
setSSECustomerKey(sseKey);
return this;
}
/**
* Sets the optional progress listener for receiving updates for object
* upload status.
*
* @param progressListener
* The legacy progress listener that is used exclusively for Amazon S3 client.
*
* @deprecated use {@link #setGeneralProgressListener(ProgressListener)} instead.
*/
@Deprecated
public void setProgressListener(com.amazonaws.services.s3.model.ProgressListener progressListener) {
this.generalProgressListener = new LegacyS3ProgressListener(progressListener);
}
/**
* Returns the optional progress listener for receiving updates about object
* upload status.
*
* @return the optional progress listener for receiving updates about object
* upload status.
*
* @deprecated use {@link #getGeneralProgressListener()} instead.
*/
@Deprecated
public com.amazonaws.services.s3.model.ProgressListener getProgressListener() {
if (generalProgressListener instanceof LegacyS3ProgressListener) {
return ((LegacyS3ProgressListener)generalProgressListener).unwrap();
} else {
return null;
}
}
/**
* Sets the optional progress listener for receiving updates about object
* upload status, and returns this updated object so that additional method
* calls can be chained together.
*
* @param progressListener
* The legacy progress listener that is used exclusively for Amazon S3 client.
*
* @return This updated PutObjectRequest object.
*
* @deprecated use {@link #withGeneralProgressListener(ProgressListener)} instead.
*/
@Deprecated
public PutObjectRequest withProgressListener(com.amazonaws.services.s3.model.ProgressListener progressListener) {
setProgressListener(progressListener);
return this;
}
/**
* Sets the optional progress listener for receiving updates about object
* upload status.
*
* @param generalProgressListener
* The new progress listener.
*/
public void setGeneralProgressListener(ProgressListener generalProgressListener) {
this.generalProgressListener = generalProgressListener;
}
/**
* Returns the optional progress listener for receiving updates about object
* upload status.
*
* @return the optional progress listener for receiving updates about object
* upload status.
*/
public ProgressListener getGeneralProgressListener() {
return generalProgressListener;
}
/**
* Sets the optional progress listener for receiving updates about object
* upload status, and returns this updated object so that additional method
* calls can be chained together.
*
* @param generalProgressListener
* The new progress listener.
*
* @return This updated PutObjectRequest object.
*/
public PutObjectRequest withGeneralProgressListener(ProgressListener generalProgressListener) {
setGeneralProgressListener(generalProgressListener);
return this;
}
/**
* Returns a clone of this object so that the metadata can be further
* modified without affecting the original.
*/
public PutObjectRequest clone() {
return new PutObjectRequest(bucketName, key, redirectLocation).
withAccessControlList(accessControlList)
.withCannedAcl(cannedAcl)
.withFile(file)
.withGeneralProgressListener(generalProgressListener)
.withInputStream(inputStream)
.withMetadata(metadata == null ? null : metadata.clone())
.withStorageClass(storageClass)
.withRequestMetricCollector(getRequestMetricCollector())
;
}
}