etc.system.properties Maven / Gradle / Ivy
The newest version!
################################################################################
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
################################################################################
#
# The properties defined in this file will be made available through system
# properties at the very beginning of the Karaf's boot process.
#
# Log level when the pax-logging service is not available
# This level will only be used while the pax-logging service bundle
# is not fully available.
# To change log levels, please refer to the org.ops4j.pax.logging.cfg file
# instead.
org.ops4j.pax.logging.DefaultServiceLog.level = ERROR
#
# Name of this Karaf instance.
#
karaf.name = livesense
#
# Default repository where bundles will be loaded from before using
# other Maven repositories. For the full Maven configuration, see
# the org.ops4j.pax.url.mvn.cfg file.
#
karaf.default.repository = system
#
# Location of a shell script that will be run when starting a shell
# session. This script can be used to create aliases and define
# additional commands.
#
karaf.shell.init.script = ${karaf.etc}/shell.init.script
#
# Sets the maximum size of the shell command history. If not set,
# defaults to 500 entries. Setting to 0 will disable history.
#
# karaf.shell.history.maxSize = 0
#
# Deletes the entire karaf.data directory at every start
#
karaf.clean.all = false
#
# Deletes the karaf.data/cache directory at every start
#
karaf.clean.cache = false
#
# Roles to use when logging into a local Karaf console.
#
# The syntax is the following:
# [classname:]principal
# where classname is the class name of the principal object
# (defaults to org.apache.karaf.jaas.modules.RolePrincipal)
# and principal is the name of the principal of that class
# (defaults to instance).
#
karaf.local.roles = admin,manager,viewer
#
# Set this empty property to avoid errors when validating xml documents.
#
xml.catalog.files =
#
# Suppress the bell in the console when hitting backspace too many times
# for example
#
jline.nobell = true
#
# ServiceMix specs options
#
org.apache.servicemix.specs.debug = false
org.apache.servicemix.specs.timeout = 100
#
# Settings for the OSGi 4.3 Weaving
# By default, we will not weave any classes. Change this setting to include classes
# that you application needs to have woven.
#
org.apache.aries.proxy.weaving.enabled = none
# Classes not to weave - Aries default + Xerces which is known to have issues.
org.apache.aries.proxy.weaving.disabled = org.objectweb.asm.*,org.slf4j.*,org.apache.log4j.*,javax.*,org.apache.xerces.*
#
# By default, only Karaf shell commands are secured, but additional services can be
# secured by expanding this filter
#
karaf.secured.services = (&(osgi.command.scope=*)(osgi.command.function=*))
#
# Security properties
#
# To enable OSGi security, uncomment the properties below,
# install the framework-security feature and restart.
#
#java.security.policy=${karaf.etc}/all.policy
#org.osgi.framework.security=osgi
#org.osgi.framework.trust.repositories=${karaf.etc}/trustStore.ks
#
# Sling configuration
#
sling.launchpad=${karaf.home}/data
# The file contains default configuration for various framework settings. All
# settings configured here may be ammended or overwritten either using the
# FrameworkLauncherServlet.loadPropertiesOverride() method or web application
# initialization paramneters.
#
# Property values may contain references to other properties using the standard
# ${} syntax.
#
# Default home directory ("sling"). It is expected for this property to be
# overwritten by the "sling.home" init-param of the web application.
sling.home=${karaf.home}/data
#
# Default sling.context. The name of the default sling.context to use in the
# sling application. This value is mainly used to create default configurations
# for factory services and will be used to set the "sling.context" configuration
# property of such generated configurations.
sling.context.default = default
#
# The name of the JCR repository. Default is "jackrabbit".
# sling.repository.name =
#
# The JCR repository home directory. Default is sling.home/sling.repository.name.
# sling.repository.home =
#
# The JCR repository url config file (repository.xml). Default is repository.xml in
# bundle Embedded JCR Repository
# sling.repository.config.file.url =
#
# Policy for the bundle parent classloaders used for boot delegation
# Possible values:
# - boot -- Bootclass Loader; essentially same as "app" (default)
# - ext -- Extension Classloader; parent of "app"
# - app -- ClassLoader.getSystemClassLoader()
# - framework -- Classloader loading the OSGi Framework classes
org.osgi.framework.bundle.parent = framework
#
# List of packages to append to the org.osgi.framework.system.packages property
# NOTE: If this is set, it must start with a comma !
# org.apache.sling.launcher.system.packages
#
# List of packages to append to the org.osgi.framework.bootdelegation property
# NOTE: If this is set, it must start with a comma !
# org.apache.sling.launcher.bootdelegation
#
# Include properties to install additional assemblies such as JCR support
# Core Sling etc.
sling.include.install = sling_install.properties
#
# Default Logging Configuration (see org.apache.sling.commons.log Bundle documentation)
# org.apache.sling.commons.log.intialize = true
org.apache.sling.commons.log.level = INFO
org.apache.sling.commons.log.file = ${sling.home}/logs/error.log
org.apache.sling.commons.log.file.number = 5
org.apache.sling.commons.log.file.size = '.'yyyy-MM-dd
#
# To enable the current server side debugging in the Rhino interpreter
# set the org.apache.sling.scripting.javascript.debug property to true.
# This will open a Swing window for Rhino JavaScript debugging on the
# server platform. Not setting this property or setting it to anything
# but true will disable this server-side debugger.
# org.apache.sling.scripting.javascript.debug = false
# Logging configuration for the SCR (if installed)
ds.loglevel = ${org.apache.sling.commons.log.level}
# Some Sling bundles depend on the non-standard functionality of Apache Felix
# SCR to create component factory instances based on factory configurations
# so we have to set the ds.factory.enabled property for the upcoming Apache
# Felix SCR release (and current 1.0.9-SNAPSHOT builds) to support this.
# see SLING-1136 for more details and references
ds.factory.enabled = true
#
# Space separated list of URLs to the OSGi Bundle Repository files.
# The referred to repository contains referrals to other repositories
# like the Apache Sling releases and the Apache Felix releases repositories
# obr.repository.url = http://sling.apache.org/obr/repository.xml
#
# Felix Configuration Admin File Persistence Configuration file directory
felix.cm.dir = ${sling.launchpad}/config
#
# Sling Installer file directory
sling.installer.dir = ${sling.launchpad}/installer
#
# Felix Framework profile directory. This is by default the "felix" directory
# below the application home directory.
org.osgi.framework.storage = ${sling.launchpad}/cache
#
# Default initial framework start level
org.osgi.framework.startlevel.beginning=100
# Install and update initial framework start level
# This should be lower than the default initial framework start level
# During an install or update, the framework starts with this level
# and the startup manager increases the start level by one
# until the initial framework start level is reached.
# sling.framework.install.incremental=true
# sling.framework.install.startlevel=10
#
# Default start level for newly installed bundles not explicitly assigned
# a start level
#felix.startlevel.bundle=20
# Enable Felix URL handlers (see SLING-862)
#felix.service.urlhandlers=true
#
# Include JRE package list
#sling.include.jre = jre-${java.specification.version}.properties
#
# New-style generic execution environment capabilities.
#org.osgi.framework.system.capabilities= \
# ${eecap-${java.specification.version}}
#
# Deprecated old-style execution environment properties.
#org.osgi.framework.executionenvironment= \
# ${ee-${java.specification.version}}
#
# Framework system packages to be visible
#org.osgi.framework.system.packages= \
# ${osgi-core-packages}, \
# ${osgi-compendium-services}, \
# org.apache.sling.launchpad.api;version=1.1.0, \
# ${jre-${java.specification.version}} \
# ${org.apache.sling.launcher.system.packages}
# Boot delegation packages never included anywhere (usually sun.*,com.sun.*)
# We include com.yourkit here to allow profiling the servlet container in
# which the web app is running
# sun.* and/or com.sun.* may be included if there is code which - violating
# specs by Sun - directly calls into these packages.
# org.osgi.framework.bootdelegation=sun.*,com.sun.*
#org.osgi.framework.bootdelegation=com.yourkit.*, \
# ${org.apache.sling.launcher.bootdelegation}
#
# SLING-1925: boot delegate sun.reflect package
#sling.bootdelegation.sun.reflect = sun.reflect
# JBoss XML factory package (SLING-2466)
#sling.bootdelegation.jboss = __redirected
# Oracle WebLogic XML factory support (SLING-2466)
#sling.bootdelegation.weblogic = weblogic.xml.*
# IBM WebSphere XML factory support (SLING-2466)
#sling.bootdelegation.ibm = com.ibm.xml.*
#
# Package Specifications for org.osgi.framework.system.packages
# osgi-core-packages : OSGi Core Specification packages
# osgi-compendium-services : OSGi Compendium Specification packages
#
# Note: These properties are actually prefixed with "sling." and are renamed
# to their correct equivalen (without the "sling." prefix) when loading
# the properties to launch the framework. This is done to be able to
# overwrite the values from the sling.properties file in case of an
# OSGi API update.
# Only provide the OSGi packages contained in the Felix framework itself
#sling.osgi-core-packages= \
# org.osgi.framework; version=1.6, \
# org.osgi.framework.hooks.bundle; version=1.0, \
# org.osgi.framework.hooks.resolver; version=1.0, \
# org.osgi.framework.hooks.service; version=1.1, \
# org.osgi.framework.hooks.weaving; version=1.0, \
# org.osgi.framework.launch; version=1.0, \
# org.osgi.framework.startlevel; version=1.0, \
# org.osgi.framework.wiring; version=1.0, \
# org.osgi.service.packageadmin; version=1.2, \
# org.osgi.service.startlevel; version=1.1, \
# org.osgi.service.url; version=1.0
# Only provide the tracker (from the felix framework)
#sling.osgi-compendium-services= \
# org.osgi.util.tracker;version="1.5"
© 2015 - 2025 Weber Informatics LLC | Privacy Policy