org.apache.xmlbeans.XmlOptions Maven / Gradle / Ivy
/* Copyright 2004 The Apache Software Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.xmlbeans;
import org.xml.sax.EntityResolver;
import org.xml.sax.XMLReader;
import java.net.URI;
import java.util.HashMap;
import java.util.Map;
import java.util.Collection;
import java.util.Collections;
import java.util.Set;
import javax.xml.namespace.QName;
/**
* Used to supply options for loading, saving, and compiling, and validating.
*
* There are two styles for using XmlOptions: multiline setup, and single-line use.
* Here are two examples. First, multiline style:
*
* XmlOptions opts = new XmlOptions();
* opts.setSavePrettyPrint();
* opts.setSavePrettyPrintIndent(4);
* System.out.println(xobj.xmlText(opts));
*
*
* The alternative is single-line usage:
*
* System.out.println(xobj.xmlText(
* new XmlOptions().setSavePrettyPrint().setSavePrettyPrintIndent(4)));
*
*
* Table showing where each option gets used.
* Note that:
*
* - options available for
newInstance methods will also
* apply for parse methods
* - options used for
validate methods are also used for
* compile methods, since compilation usually implies
* validation against Schema for Schemas
*
*
*
*
* newInstance methodsparse methodsvalidate methodscompile methodssave and xmlTextmethods
*
* setDocumentType
* setDocumentSourceName
* setValidateOnSet
* setUnsynchronizedsetLoad***
* setEntityResolversetErrorListener
* setValidateTreatLaxAsSkip
* setValidateStrictsetErrorListener
* setCompile***
* setEntityResolver
* setBaseURI
* setGenerateJavaVersionsetSave***
* setUseDefaultNamespace
* setCharacterEncoding
*
*/
public class XmlOptions implements java.io.Serializable
{
private static final long serialVersionUID = 1L;
private Map _map = new HashMap();
/**
* Construct a new blank XmlOptions.
*/
public XmlOptions ( ) { }
/**
* Construct a new XmlOptions, copying the options.
*/
public XmlOptions (XmlOptions other) {
if (other != null) _map.putAll(other._map);
}
//
// Handy-dandy helper methods for setting some options
//
/**
* This option will cause the saver to save namespace attributes first.
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveNamespacesFirst() {
return set( SAVE_NAMESPACES_FIRST );
}
/**
* This option will cause the saver to reformat white space for easier reading.
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSavePrettyPrint() {
return set( SAVE_PRETTY_PRINT );
}
/**
* When used with setSavePrettyPrint this sets the indent
* amount to use.
*
* @param indent the indent amount to use
* @see #setSavePrettyPrint
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSavePrettyPrintIndent(int indent) {
return set( SAVE_PRETTY_PRINT_INDENT, indent );
}
/**
* When used with setSavePrettyPrint this sets the offset
* amount to use.
*
* @param offset the offset amount to use
* @see #setSavePrettyPrint
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSavePrettyPrintOffset(int offset) {
return set( SAVE_PRETTY_PRINT_OFFSET, offset );
}
/**
* When writing a document, this sets the character
* encoding to use.
*
* @param encoding the character encoding
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
* @see XmlTokenSource#save(java.io.File, XmlOptions)
*/
public XmlOptions setCharacterEncoding(String encoding) {
return set( CHARACTER_ENCODING, encoding );
}
/**
* When parsing a document, this sets the type of the root
* element. If this is set, the parser will not try to guess
* the type based on the document's QName.
*
* @param type The root element's document type.
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setDocumentType(SchemaType type) {
return set( DOCUMENT_TYPE, type );
}
/**
* Sets a collection object for collecting {@link XmlError} objects
* during parsing, validation, and compilation. When set, the collection
* will contain all the errors after the operation takes place. Notice that
* the errors will only have line numbers if the document was
* loaded with line numbers enabled.
*
* The following simple example illustrates using an error listener
* during validation.
*
*
* // Create an XmlOptions instance and set the error listener.
* XmlOptions validateOptions = new XmlOptions();
* ArrayList errorList = new ArrayList();
* validateOptions.setErrorListener(errorList);
*
* // Validate the XML.
* boolean isValid = newEmp.validate(validateOptions);
*
* // If the XML isn't valid, loop through the listener's contents,
* // printing contained messages.
* if (!isValid)
* {
* for (int i = 0; i < errorList.size(); i++)
* {
* XmlError error = (XmlError)errorList.get(i);
*
* System.out.println("\n");
* System.out.println("Message: " + error.getMessage() + "\n");
* System.out.println("Location of invalid XML: " +
* error.getCursorLocation().xmlText() + "\n");
* }
* }
*
*
* @param c A collection that will be filled with {@link XmlError} objects
* via {@link Collection#add}
*
* @see XmlError
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
* @see XmlObject#validate(XmlOptions)
* @see XmlBeans#compileXsd
* @see XmlOptions#setLoadLineNumbers
*/
public XmlOptions setErrorListener (Collection c) {
return set( ERROR_LISTENER, c );
}
/**
* Causes the saver to reduce the number of namespace prefix declarations.
* The saver will do this by passing over the document twice, first to
* collect the set of needed namespace declarations, and then second
* to actually save the document with the declarations collected
* at the root.
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveAggressiveNamespaces() {
return set( SAVE_AGGRESSIVE_NAMESPACES );
}
/**
* @deprecated replaced by {@link #setSaveAggressiveNamespaces}
*/
public XmlOptions setSaveAggresiveNamespaces() {
return setSaveAggressiveNamespaces();
}
/**
* This option causes the saver to wrap the current fragment in
* an element with the given name.
*
* @param name the name to use for the top level element
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveSyntheticDocumentElement (QName name) {
return set( SAVE_SYNTHETIC_DOCUMENT_ELEMENT, name );
}
/**
* If this option is set, the saver will try to use the default
* namespace for the most commonly used URI. If it is not set
* the saver will always created named prefixes.
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setUseDefaultNamespace () {
return set( SAVE_USE_DEFAULT_NAMESPACE );
}
/**
* If namespaces have already been declared outside the scope of the
* fragment being saved, this allows those mappings to be passed
* down to the saver, so the prefixes are not re-declared.
*
* @param implicitNamespaces a map of prefixes to uris that can be
* used by the saver without being declared
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveImplicitNamespaces (Map implicitNamespaces) {
return set( SAVE_IMPLICIT_NAMESPACES, implicitNamespaces );
}
/**
* A map of hints to pass to the saver for which prefixes to use
* for which namespace URI.
*
* @param suggestedPrefixes a map from URIs to prefixes
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveSuggestedPrefixes (Map suggestedPrefixes) {
return set( SAVE_SUGGESTED_PREFIXES, suggestedPrefixes );
}
/**
* This option causes the saver to filter a Processing Instruction
* with the given target
*
* @param filterProcinst the name of a Processing Instruction to filter
* on save
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveFilterProcinst (String filterProcinst) {
return set( SAVE_FILTER_PROCINST, filterProcinst );
}
/**
* This option causes the saver to replace characters with other values in
* the output stream. It is intended to be used for escaping non-standard
* characters during output.
*
* @param characterReplacementMap is an XmlOptionCharEscapeMap containing
* the characters to be escaped.
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
* @see XmlOptionCharEscapeMap
*/
public XmlOptions setSaveSubstituteCharacters (
XmlOptionCharEscapeMap characterReplacementMap) {
return set( SAVE_SUBSTITUTE_CHARACTERS, characterReplacementMap );
}
/**
* When saving a fragment, this option changes the qname of the synthesized
* root element. Normally <xml-fragment> is used.
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveUseOpenFrag () {
return set( SAVE_USE_OPEN_FRAGMENT );
}
/**
* This option controls whether saving begins on the element or its contents
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveOuter () {
return set( SAVE_OUTER );
}
/**
* This option controls whether saving begins on the element or its contents
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveInner () {
return set( SAVE_INNER );
}
/**
* This option controls whether saving saves out the XML
* declaration (
*
* @see XmlTokenSource#save(java.io.File, XmlOptions)
* @see XmlTokenSource#xmlText(XmlOptions)
*/
public XmlOptions setSaveNoXmlDecl () {
return set( SAVE_NO_XML_DECL );
}
/**
* This option controls when saving will use CDATA blocks.
* CDATA will be used if the folowing condition is true:
*
textLength > cdataLengthThreshold && entityCount > cdataEntityCountThreshold
*
The default value of cdataLengthThreshold is 32.
*
*
Use the folowing values for these cases:
*
* Scenario cdataLengthThreshold cdataEntityCountThreshold Every text is CDATA 0 -1 Only text that has an entity is CDATA 0 0 Only text longer than x chars is CDATA x -1 Only text that has y entitazable chars is CDATA 0 y Only text longer than x chars and has y entitazable chars is CDATA x y
* @see XmlOptions#setSaveCDataEntityCountThreshold(int)
*/
public XmlOptions setSaveCDataLengthThreshold (int cdataLengthThreshold) {
return set( SAVE_CDATA_LENGTH_THRESHOLD, cdataLengthThreshold );
}
/**
* This option controls when saving will use CDATA blocks.
* CDATA will be used if the folowing condition is true:
*
textLength > cdataLengthThreshold && entityCount > cdataEntityCountThreshold
*
The default value of cdataEntityCountThreshold is 5.
*
* @see XmlOptions#setSaveCDataLengthThreshold(int)
*/
public XmlOptions setSaveCDataEntityCountThreshold (int cdataEntityCountThreshold) {
return set( SAVE_CDATA_ENTITY_COUNT_THRESHOLD, cdataEntityCountThreshold );
}
/**
* Use this option when parsing and saving XML documents.
*
* For parsing this option will annotate the text fields in the store with CDataBookmark.
*
* For saving this option will save the text fields annotated with CDataBookmark as
* CDATA XML text.
* Note: The SaveCDataEntityCountThreshold and SaveCDataLengthThreshold options and
* their default values still apply.
*
* Note: Due to the store representation, a CDATA will not be recognized
* if it is imediately after non CDATA text and all text following it will
* be considered CDATA.
* Example:
*
* <a><![CDATA[cdata text]]></a> - is considered as: <a><![CDATA[cdata text]]></a>
* <b><![CDATA[cdata text]]> regular text</b> - is considered as: <b><![CDATA[cdata text regular text]]></b>
* <c>text <![CDATA[cdata text]]></c> - is considered as: <c>text cdata text</c>
*
*
*
* Sample code:
*
String xmlText = "<a>\n" +
"<a><![CDATA[cdata text]]></a>\n" +
"<b><![CDATA[cdata text]]> regular text</b>\n" +
"<c>text <![CDATA[cdata text]]></c>\n" +
"</a>";
System.out.println(xmlText);
XmlOptions opts = new XmlOptions();
opts.setUseCDataBookmarks();
XmlObject xo = XmlObject.Factory.parse( xmlText , opts);
System.out.println("xo1:\n" + xo.xmlText(opts));
System.out.println("\n");
opts.setSavePrettyPrint();
System.out.println("xo2:\n" + xo.xmlText(opts));
*
*
*
* @see CDataBookmark
* @see CDataBookmark#CDATA_BOOKMARK
*/
public XmlOptions setUseCDataBookmarks()
{
return set( LOAD_SAVE_CDATA_BOOKMARKS );
}
/**
* This option controls whether namespace declarations are included as attributes in the
* startElement event. By default, up to and including XMLBeans 2.3.0 they were included, in
* subsequent versions, they are no longer included.
*/
public XmlOptions setSaveSaxNoNSDeclsInAttributes () {
return set( SAVE_SAX_NO_NSDECLS_IN_ATTRIBUTES );
}
/**
* If this option is set, the document element is replaced with the
* given QName when parsing. If null is supplied, the document element
* is removed.
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadReplaceDocumentElement ( QName replacement ) {
return set( LOAD_REPLACE_DOCUMENT_ELEMENT, replacement );
}
/**
* If this option is set, all insignificant whitespace is stripped
* when parsing a document. Can be used to save memory on large
* documents when you know there is no mixed content.
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadStripWhitespace () {
return set( LOAD_STRIP_WHITESPACE);
}
/**
* If this option is set, all comments are stripped when parsing
* a document.
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadStripComments() {
return set( LOAD_STRIP_COMMENTS );
}
/**
* If this option is set, all processing instructions
* are stripped when parsing a document.
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadStripProcinsts () {
return set( LOAD_STRIP_PROCINSTS );
}
/**
* If this option is set, line number annotations are placed
* in the store when parsing a document. This is particularly
* useful when you want {@link XmlError} objects to contain
* line numbers.
*
Note: This adds line numbers info only for start tags.
* For line number info on end tags use:
* {@link XmlOptions#setLoadLineNumbers(java.lang.String)}
*
Example: xmlOptions.setLoadLineNumbers(XmlOptions.LOAD_LINE_NUMBERS_END_ELEMENT)
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
* @see XmlError
*/
public XmlOptions setLoadLineNumbers () {
return set( LOAD_LINE_NUMBERS );
}
/**
* If this option is set, line number annotations are placed
* in the store when parsing a document. This is particularly
* useful when you want {@link XmlError} objects to contain
* line numbers. Use the option to load line numbers at the end of an element.
*
Example: xmlOptions.setLoadLineNumbers(XmlOptions.LOAD_LINE_NUMBERS_END_ELEMENT)
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
* @see XmlError
*/
public XmlOptions setLoadLineNumbers (String option) {
XmlOptions temp = setLoadLineNumbers();
temp = temp.set( option );
return temp;
}
/**
* This option sets a map of namespace uri substitutions that happen
* when parsing a document.
*
* This is particularly useful if you
* have documents that use no namespace, but you wish to avoid
* the name collision problems that occur when you introduce
* schema definitions without a target namespace.
*
* By mapping the empty string "" (the absence of a URI) to a specific
* namespace, you can force the parser to behave as if a no-namespace
* document were actually in the specified namespace. This allows you
* to type the instance according to a schema in a nonempty namespace,
* and therefore avoid the problematic practice of using schema
* definitions without a target namespace.
*
* @param substNamespaces a map of document URIs to replacement URIs
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadSubstituteNamespaces (Map substNamespaces) {
return set( LOAD_SUBSTITUTE_NAMESPACES, substNamespaces );
}
/**
* If this option is set, the underlying xml text buffer is trimmed
* immediately after parsing a document resulting in a smaller memory
* footprint. Use this option if you are loading a large number
* of unchanging documents that will stay in memory for some time.
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadTrimTextBuffer () {
return set( LOAD_TRIM_TEXT_BUFFER );
}
/**
* Set additional namespace mappings to be added when parsing
* a document.
*
* @param nses additional namespace mappings
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadAdditionalNamespaces (Map nses) {
return set( LOAD_ADDITIONAL_NAMESPACES, nses );
}
/**
* If this option is set when loading from an InputStream or File, then
* the loader will compute a 160-bit SHA-1 message digest of the XML
* file while loading it and make it available via
* XmlObject.documentProperties().getMessageDigest();
*
* The schema compiler uses message digests to detect and eliminate
* duplicate imported xsd files.
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadMessageDigest () {
return set( LOAD_MESSAGE_DIGEST );
}
/**
* By default, XmlBeans does not resolve entities when parsing xml
* documents (unless an explicit entity resolver is specified).
* Use this option to turn on entity resolving by default.
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadUseDefaultResolver () {
return set( LOAD_USE_DEFAULT_RESOLVER );
}
/**
* By default, XmlBeans uses an internal Piccolo parser,
* other parsers can be used by providing an XMLReader.
* For using the default JDK's SAX parser use:
* xmlOptions.setLoadUseXMLReader( SAXParserFactory.newInstance().newSAXParser().getXMLReader() );
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setLoadUseXMLReader (XMLReader xmlReader) {
return set( LOAD_USE_XMLREADER, xmlReader );
}
/**
* Sets the name of the variable that represents
* the current node in a query expression.
*
* @param varName The new variable name to use for the query.
*
* @see XmlObject#execQuery
* @see XmlCursor#execQuery
*/
public XmlOptions setXqueryCurrentNodeVar (String varName) {
return set( XQUERY_CURRENT_NODE_VAR, varName );
}
/**
* Map the names and values of external variables in an xquery
* expression. The keys of the map are the variable names
* in the query without the '$' prefix. The values of the map
* are objects and can be any of the primitive wrapper classes,
* String, XmlObject, or XmlCursor. The mapping only applies to
* xquery and has no effect on xpath expressions.
*
* @param varMap a map from Strings to variable instances.
*
* @see XmlObject#execQuery
* @see XmlCursor#execQuery
*/
public XmlOptions setXqueryVariables (Map varMap) {
return set( XQUERY_VARIABLE_MAP, varMap );
}
/**
* This option sets the document source name into the xml store
* when parsing a document. If a document is parsed from a
* File or URI, it is automatically set to the URI of the
* source; otherwise, for example, when parsing a String,
* you can use this option to specify the source name yourself.
*
* @see XmlObject.Factory#parse(java.lang.String, XmlOptions)
*/
public XmlOptions setDocumentSourceName (String documentSourceName) {
return set( DOCUMENT_SOURCE_NAME, documentSourceName );
}
/**
* This option allows for QName substitution during schema compilation.
*
* @param nameMap a map from QNames to substitute QNames.
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setCompileSubstituteNames (Map nameMap) {
return set( COMPILE_SUBSTITUTE_NAMES, nameMap );
}
/**
* If this option is set, validation is not done on the Schema XmlBeans
* when building a SchemaTypeSystem
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setCompileNoValidation () {
return set( COMPILE_NO_VALIDATION );
}
/**
* If this option is set, the unique particle attribution rule is not
* enforced when building a SchemaTypeSystem. See
* Appendix H of the XML Schema specification
* for information on the UPA rule.
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setCompileNoUpaRule () {
return set( COMPILE_NO_UPA_RULE );
}
/**
* If this option is set, the particle valid (restriciton) rule is not
* enforced when building a SchemaTypeSystem. See
* Section 3.9.6 of the XML Schema specification
* for information on the PVR rule.
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setCompileNoPvrRule () {
return set( COMPILE_NO_PVR_RULE );
}
/**
* if this option is set, the schema compiler will skip annotations when
* processing Schema components.
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setCompileNoAnnotations() {
return set( COMPILE_NO_ANNOTATIONS );
}
/**
* If this option is set, then the schema compiler will try to download
* schemas that appear in imports and includes from network based URLs.
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setCompileDownloadUrls () {
return set( COMPILE_DOWNLOAD_URLS);
}
/**
* If this option is set, then the schema compiler will permit and
* ignore multiple definitions of the same component (element, attribute,
* type, etc) names in the given namespaces. If multiple definitions
* with the same name appear, the definitions that happen to be processed
* last will be ignored.
*
* @param mdefNamespaces a set of namespace URIs as Strings
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setCompileMdefNamespaces(Set mdefNamespaces)
{
return set( COMPILE_MDEF_NAMESPACES, mdefNamespaces );
}
/**
* If this option is set when an instance is created, then value
* facets will be checked on each call to a setter or getter
* method on instances of XmlObject within the instance document.
* If the facets are not satisfied, then an unchecked exception is
* thrown immediately. This option is useful for finding code that
* is introducing invalid values in an XML document, but it
* slows performance.
*
* @see XmlObject.Factory#parse(java.io.File, XmlOptions)
*/
public XmlOptions setValidateOnSet() {
return set( VALIDATE_ON_SET );
}
/**
* Instructs the validator to skip elements matching an
* particle with contentModel="lax". This is useful because,
* in certain situations, XmlBeans will find types on the
* classpath that the document author did not anticipate.
*/
public XmlOptions setValidateTreatLaxAsSkip() {
return set ( VALIDATE_TREAT_LAX_AS_SKIP );
}
/**
* Performs additional validation checks that are disabled by
* default for better compatibility.
*/
public XmlOptions setValidateStrict() {
return set ( VALIDATE_STRICT );
}
/**
* This option controls whether or not operations on XmlBeans are
* thread safe. When not on, all XmlBean operations will be syncronized.
* This provides for multiple thread the ability to access a single
* XmlBeans simultainously, but has a perf impact. If set, then
* only one thread may access an XmlBean.
*/
public XmlOptions setUnsynchronized ( )
{
return set( UNSYNCHRONIZED );
}
/**
* If this option is set when compiling a schema, then the given
* EntityResolver will be consulted in order to resolve any
* URIs while downloading imported schemas.
*
* EntityResolvers are currently only used by compileXsd; they
* are not consulted by other functions, for example, parse.
* This will likely change in the future.
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setEntityResolver(EntityResolver resolver) {
return set( ENTITY_RESOLVER, resolver );
}
/**
* If this option is set when compiling a schema, then the given
* URI will be considered as base URI when deciding the directory
* structure for saving the sources inside the generated JAR file.
* @param baseURI the URI to be considered as "base"
* @see XmlBeans#compileXsd
*/
public XmlOptions setBaseURI(URI baseURI) {
return set( BASE_URI, baseURI );
}
/**
* If this option is set when compiling a schema, then the given
* SchemaTypeCodePrinter.Printer will be used to generate the
* Java code.
*
* @see XmlBeans#compileXsd
*/
public XmlOptions setSchemaCodePrinter(SchemaCodePrinter printer) {
return set( SCHEMA_CODE_PRINTER, printer );
}
/**
* If this option is set, then the schema compiler will print java code
* that is compatible with the desired Java version. If not set, the
* current Java version is used. Currently, only "1.4" and "1.5" are
* supported.
*
* @param source A Java version number
*
* @see #GENERATE_JAVA_14
* @see #GENERATE_JAVA_15
* @see XmlBeans#compileXmlBeans
*/
public XmlOptions setGenerateJavaVersion (String source) {
return set( GENERATE_JAVA_VERSION, source );
}
/**
* If this option is set to true, the return of XmlObject.copy() method will
* return an object in it's own synchronization domain, otherwise both objects
* will share the same synchronization domain, requiring explicit synchronization
* when concurent accessing the two objects.
*
* @param useNewSyncDomain A flag representing the usage of new domain
*
* @see XmlObject#copy()
*/
public XmlOptions setCopyUseNewSynchronizationDomain (boolean useNewSyncDomain)
{
return set(COPY_USE_NEW_SYNC_DOMAIN, useNewSyncDomain ? Boolean.TRUE : Boolean.FALSE );
}
/**
* Sets the maximum number of bytes allowed when an Entity is expanded during parsing.
* The default value is 10240 bytes.
* @param entityBytesLimit
* @return
*/
public XmlOptions setLoadEntityBytesLimit (int entityBytesLimit)
{
return set(LOAD_ENTITY_BYTES_LIMIT,entityBytesLimit);
}
public static final String GENERATE_JAVA_14 = "1.4";
public static final String GENERATE_JAVA_15 = "1.5";
//
// Complete set of XmlOption's
//
// TODO - Add selectPath option to track the seletion (deault is to clean selections fast).
/** @exclude */
public static final String SAVE_NAMESPACES_FIRST = "SAVE_NAMESPACES_FIRST";
/** @exclude */
public static final String SAVE_SYNTHETIC_DOCUMENT_ELEMENT = "SAVE_SYNTHETIC_DOCUMENT_ELEMENT";
/** @exclude */
public static final String SAVE_PRETTY_PRINT = "SAVE_PRETTY_PRINT";
/** @exclude */
public static final String SAVE_PRETTY_PRINT_INDENT = "SAVE_PRETTY_PRINT_INDENT";
/** @exclude */
public static final String SAVE_PRETTY_PRINT_OFFSET = "SAVE_PRETTY_PRINT_OFFSET";
/** @exclude */
public static final String SAVE_AGGRESSIVE_NAMESPACES = "SAVE_AGGRESSIVE_NAMESPACES";
/** @exclude */
public static final String SAVE_USE_DEFAULT_NAMESPACE = "SAVE_USE_DEFAULT_NAMESPACE";
/** @exclude */
public static final String SAVE_IMPLICIT_NAMESPACES = "SAVE_IMPLICIT_NAMESPACES";
/** @exclude */
public static final String SAVE_SUGGESTED_PREFIXES = "SAVE_SUGGESTED_PREFIXES";
/** @exclude */
public static final String SAVE_FILTER_PROCINST = "SAVE_FILTER_PROCINST";
/** @exclude */
public static final String SAVE_USE_OPEN_FRAGMENT = "SAVE_USE_OPEN_FRAGMENT";
/** @exclude */
public static final String SAVE_OUTER = "SAVE_OUTER";
/** @exclude */
public static final String SAVE_INNER = "SAVE_INNER";
/** @exclude */
public static final String SAVE_NO_XML_DECL = "SAVE_NO_XML_DECL";
/** @exclude */
public static final String SAVE_SUBSTITUTE_CHARACTERS = "SAVE_SUBSTITUTE_CHARACTERS";
/** @exclude */
public static final String SAVE_OPTIMIZE_FOR_SPEED = "SAVE_OPTIMIZE_FOR_SPEED";
/** @exclude */
public static final String SAVE_CDATA_LENGTH_THRESHOLD = "SAVE_CDATA_LENGTH_THRESHOLD";
/** @exclude */
public static final String SAVE_CDATA_ENTITY_COUNT_THRESHOLD = "SAVE_CDATA_ENTITY_COUNT_THRESHOLD";
/** @exclude */
public static final String SAVE_SAX_NO_NSDECLS_IN_ATTRIBUTES = "SAVE_SAX_NO_NSDECLS_IN_ATTRIBUTES";
/** @exclude */
public static final String LOAD_REPLACE_DOCUMENT_ELEMENT = "LOAD_REPLACE_DOCUMENT_ELEMENT";
/** @exclude */
public static final String LOAD_STRIP_WHITESPACE = "LOAD_STRIP_WHITESPACE";
/** @exclude */
public static final String LOAD_STRIP_COMMENTS = "LOAD_STRIP_COMMENTS";
/** @exclude */
public static final String LOAD_STRIP_PROCINSTS = "LOAD_STRIP_PROCINSTS";
/** @exclude */
public static final String LOAD_LINE_NUMBERS = "LOAD_LINE_NUMBERS";
/** @exclude */
public static final String LOAD_LINE_NUMBERS_END_ELEMENT = "LOAD_LINE_NUMBERS_END_ELEMENT";
/** @exclude */
public static final String LOAD_SAVE_CDATA_BOOKMARKS = "LOAD_SAVE_CDATA_BOOKMARKS";
/** @exclude */
public static final String LOAD_SUBSTITUTE_NAMESPACES = "LOAD_SUBSTITUTE_NAMESPACES";
/** @exclude */
public static final String LOAD_TRIM_TEXT_BUFFER = "LOAD_TRIM_TEXT_BUFFER";
/** @exclude */
public static final String LOAD_ADDITIONAL_NAMESPACES = "LOAD_ADDITIONAL_NAMESPACES";
/** @exclude */
public static final String LOAD_MESSAGE_DIGEST = "LOAD_MESSAGE_DIGEST";
/** @exclude */
public static final String LOAD_USE_DEFAULT_RESOLVER = "LOAD_USE_DEFAULT_RESOLVER";
/** @exclude */
public static final String LOAD_USE_XMLREADER = "LOAD_USE_XMLREADER";
/** @exclude */
public static final String XQUERY_CURRENT_NODE_VAR = "XQUERY_CURRENT_NODE_VAR";
/** @exclude */
public static final String XQUERY_VARIABLE_MAP = "XQUERY_VARIABLE_MAP";
/** @exclude */
public static final String CHARACTER_ENCODING = "CHARACTER_ENCODING";
/** @exclude */
public static final String ERROR_LISTENER = "ERROR_LISTENER";
/** @exclude */
public static final String DOCUMENT_TYPE = "DOCUMENT_TYPE";
/** @exclude */
public static final String DOCUMENT_SOURCE_NAME = "DOCUMENT_SOURCE_NAME";
/** @exclude */
public static final String COMPILE_SUBSTITUTE_NAMES = "COMPILE_SUBSTITUTE_NAMES";
/** @exclude */
public static final String COMPILE_NO_VALIDATION = "COMPILE_NO_VALIDATION";
/** @exclude */
public static final String COMPILE_NO_UPA_RULE = "COMPILE_NO_UPA_RULE";
/** @exclude */
public static final String COMPILE_NO_PVR_RULE = "COMPILE_NO_PVR_RULE";
/** @exclude */
public static final String COMPILE_NO_ANNOTATIONS = "COMPILE_NO_ANNOTATIONS";
/** @exclude */
public static final String COMPILE_DOWNLOAD_URLS = "COMPILE_DOWNLOAD_URLS";
/** @exclude */
public static final String COMPILE_MDEF_NAMESPACES = "COMPILE_MDEF_NAMESPACES";
/** @exclude */
public static final String VALIDATE_ON_SET = "VALIDATE_ON_SET";
/** @exclude */
public static final String VALIDATE_TREAT_LAX_AS_SKIP = "VALIDATE_TREAT_LAX_AS_SKIP";
/** @exclude */
public static final String VALIDATE_STRICT = "VALIDATE_STRICT";
/** @exclude */
public static final String VALIDATE_TEXT_ONLY = "VALIDATE_TEXT_ONLY";
/** @exclude */
public static final String UNSYNCHRONIZED = "UNSYNCHRONIZED";
/** @exclude */
public static final String ENTITY_RESOLVER = "ENTITY_RESOLVER";
/** @exclude */
public static final String BASE_URI = "BASE_URI";
/** @exclude */
public static final String SCHEMA_CODE_PRINTER = "SCHEMA_CODE_PRINTER";
/** @exclude */
public static final String GENERATE_JAVA_VERSION = "GENERATE_JAVA_VERSION";
/** @exclude */
public static final String COPY_USE_NEW_SYNC_DOMAIN = "COPY_USE_NEW_LOCALE";
/** @exclude */
public static final String LOAD_ENTITY_BYTES_LIMIT = "LOAD_ENTITY_BYTES_LIMIT";
private static final XmlOptions EMPTY_OPTIONS;
static {
EMPTY_OPTIONS = new XmlOptions();
EMPTY_OPTIONS._map = Collections.unmodifiableMap(EMPTY_OPTIONS._map);
}
/** If passed null, returns an empty options object. Otherwise, returns its argument. */
public static XmlOptions maskNull(XmlOptions o) {
return (o == null) ? EMPTY_OPTIONS : o;
}
/** Used to set a generic option */
public void put ( Object option ) { put( option, null ); }
/** Used to set a generic option */
public void put ( Object option, Object value ) { _map.put(option, value); }
/** Used to set a generic option */
public void put ( Object option, int value ) { put( option, new Integer( value ) ); }
private XmlOptions set(Object option) { return set(option, null); }
private XmlOptions set(Object option, Object value) { _map.put(option, value); return this;}
private XmlOptions set(Object option, int value) { return set(option, new Integer(value)); }
/** Used to test a generic option */
public boolean hasOption ( Object option ) { return _map.containsKey( option ); }
public static boolean hasOption ( XmlOptions options, Object option ) { return options == null ? false : options.hasOption( option ); }
/** Used to get a generic option */
public Object get ( Object option ) { return _map.get( option ); }
public void remove ( Object option ) { _map.remove( option ); }
/** Used to test a generic option on an options object that may be null */
public static Object safeGet(XmlOptions o, Object option) {
return o == null ? null : o.get(option);
}
}