All Downloads are FREE. Search and download functionalities are using the official Maven repository.

com.groupbyinc.common.apache.commons.lang3.time.StopWatch Maven / Gradle / Ivy

The newest version!
/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package org.apache.commons.lang3.time;

import java.util.concurrent.TimeUnit;

/**
 * 

* StopWatch provides a convenient API for timings. *

* *

* To start the watch, call {@link #start()} or {@link StopWatch#createStarted()}. At this point you can: *

*
    *
  • {@link #split()} the watch to get the time whilst the watch continues in the background. {@link #unsplit()} will * remove the effect of the split. At this point, these three options are available again.
  • *
  • {@link #suspend()} the watch to pause it. {@link #resume()} allows the watch to continue. Any time between the * suspend and resume will not be counted in the total. At this point, these three options are available again.
  • *
  • {@link #stop()} the watch to complete the timing session.
  • *
* *

* It is intended that the output methods {@link #toString()} and {@link #getTime()} should only be called after stop, * split or suspend, however a suitable result will be returned at other points. *

* *

* NOTE: As from v2.1, the methods protect against inappropriate calls. Thus you cannot now call stop before start, * resume before suspend or unsplit before split. *

* *

* 1. split(), suspend(), or stop() cannot be invoked twice
* 2. unsplit() may only be called if the watch has been split()
* 3. resume() may only be called if the watch has been suspend()
* 4. start() cannot be called twice without calling reset() *

* *

This class is not thread-safe

* * @since 2.0 */ public class StopWatch { private static final long NANO_2_MILLIS = 1000000L; /** * Provides a started stopwatch for convenience. * * @return StopWatch a stopwatch that's already been started. * * @since 3.5 */ public static StopWatch createStarted() { final StopWatch sw = new StopWatch(); sw.start(); return sw; } /** * Enumeration type which indicates the status of stopwatch. */ private enum State { UNSTARTED { @Override boolean isStarted() { return false; } @Override boolean isStopped() { return true; } @Override boolean isSuspended() { return false; } }, RUNNING { @Override boolean isStarted() { return true; } @Override boolean isStopped() { return false; } @Override boolean isSuspended() { return false; } }, STOPPED { @Override boolean isStarted() { return false; } @Override boolean isStopped() { return true; } @Override boolean isSuspended() { return false; } }, SUSPENDED { @Override boolean isStarted() { return true; } @Override boolean isStopped() { return false; } @Override boolean isSuspended() { return true; } }; /** *

* The method is used to find out if the StopWatch is started. A suspended * StopWatch is also started watch. *

* @return boolean * If the StopWatch is started. */ abstract boolean isStarted(); /** *

* This method is used to find out whether the StopWatch is stopped. The * stopwatch which's not yet started and explicitly stopped stopwatch is * considered as stopped. *

* * @return boolean * If the StopWatch is stopped. */ abstract boolean isStopped(); /** *

* This method is used to find out whether the StopWatch is suspended. *

* * @return boolean * If the StopWatch is suspended. */ abstract boolean isSuspended(); } /** * Enumeration type which indicates the split status of stopwatch. */ private enum SplitState { SPLIT, UNSPLIT } /** * The current running state of the StopWatch. */ private State runningState = State.UNSTARTED; /** * Whether the stopwatch has a split time recorded. */ private SplitState splitState = SplitState.UNSPLIT; /** * The start time. */ private long startTime; /** * The start time in Millis - nanoTime is only for elapsed time so we * need to also store the currentTimeMillis to maintain the old * getStartTime API. */ private long startTimeMillis; /** * The stop time. */ private long stopTime; /** *

* Constructor. *

*/ public StopWatch() { super(); } /** *

* Start the stopwatch. *

* *

* This method starts a new timing session, clearing any previous values. *

* * @throws IllegalStateException * if the StopWatch is already running. */ public void start() { if (this.runningState == State.STOPPED) { throw new IllegalStateException("Stopwatch must be reset before being restarted. "); } if (this.runningState != State.UNSTARTED) { throw new IllegalStateException("Stopwatch already started. "); } this.startTime = System.nanoTime(); this.startTimeMillis = System.currentTimeMillis(); this.runningState = State.RUNNING; } /** *

* Stop the stopwatch. *

* *

* This method ends a new timing session, allowing the time to be retrieved. *

* * @throws IllegalStateException * if the StopWatch is not running. */ public void stop() { if (this.runningState != State.RUNNING && this.runningState != State.SUSPENDED) { throw new IllegalStateException("Stopwatch is not running. "); } if (this.runningState == State.RUNNING) { this.stopTime = System.nanoTime(); } this.runningState = State.STOPPED; } /** *

* Resets the stopwatch. Stops it if need be. *

* *

* This method clears the internal values to allow the object to be reused. *

*/ public void reset() { this.runningState = State.UNSTARTED; this.splitState = SplitState.UNSPLIT; } /** *

* Split the time. *

* *

* This method sets the stop time of the watch to allow a time to be extracted. The start time is unaffected, * enabling {@link #unsplit()} to continue the timing from the original start point. *

* * @throws IllegalStateException * if the StopWatch is not running. */ public void split() { if (this.runningState != State.RUNNING) { throw new IllegalStateException("Stopwatch is not running. "); } this.stopTime = System.nanoTime(); this.splitState = SplitState.SPLIT; } /** *

* Remove a split. *

* *

* This method clears the stop time. The start time is unaffected, enabling timing from the original start point to * continue. *

* * @throws IllegalStateException * if the StopWatch has not been split. */ public void unsplit() { if (this.splitState != SplitState.SPLIT) { throw new IllegalStateException("Stopwatch has not been split. "); } this.splitState = SplitState.UNSPLIT; } /** *

* Suspend the stopwatch for later resumption. *

* *

* This method suspends the watch until it is resumed. The watch will not include time between the suspend and * resume calls in the total time. *

* * @throws IllegalStateException * if the StopWatch is not currently running. */ public void suspend() { if (this.runningState != State.RUNNING) { throw new IllegalStateException("Stopwatch must be running to suspend. "); } this.stopTime = System.nanoTime(); this.runningState = State.SUSPENDED; } /** *

* Resume the stopwatch after a suspend. *

* *

* This method resumes the watch after it was suspended. The watch will not include time between the suspend and * resume calls in the total time. *

* * @throws IllegalStateException * if the StopWatch has not been suspended. */ public void resume() { if (this.runningState != State.SUSPENDED) { throw new IllegalStateException("Stopwatch must be suspended to resume. "); } this.startTime += System.nanoTime() - this.stopTime; this.runningState = State.RUNNING; } /** *

* Get the time on the stopwatch. *

* *

* This is either the time between the start and the moment this method is called, or the amount of time between * start and stop. *

* * @return the time in milliseconds */ public long getTime() { return getNanoTime() / NANO_2_MILLIS; } /** *

* Get the time on the stopwatch in the specified TimeUnit. *

* *

* This is either the time between the start and the moment this method is called, or the amount of time between * start and stop. The resulting time will be expressed in the desired TimeUnit with any remainder rounded down. * For example, if the specified unit is {@code TimeUnit.HOURS} and the stopwatch time is 59 minutes, then the * result returned will be {@code 0}. *

* * @param timeUnit the unit of time, not null * @return the time in the specified TimeUnit, rounded down * @since 3.5 */ public long getTime(final TimeUnit timeUnit) { return timeUnit.convert(getNanoTime(), TimeUnit.NANOSECONDS); } /** *

* Get the time on the stopwatch in nanoseconds. *

* *

* This is either the time between the start and the moment this method is called, or the amount of time between * start and stop. *

* * @return the time in nanoseconds * @since 3.0 */ public long getNanoTime() { if (this.runningState == State.STOPPED || this.runningState == State.SUSPENDED) { return this.stopTime - this.startTime; } else if (this.runningState == State.UNSTARTED) { return 0; } else if (this.runningState == State.RUNNING) { return System.nanoTime() - this.startTime; } throw new RuntimeException("Illegal running state has occurred."); } /** *

* Get the split time on the stopwatch. *

* *

* This is the time between start and latest split. *

* * @return the split time in milliseconds * * @throws IllegalStateException * if the StopWatch has not yet been split. * @since 2.1 */ public long getSplitTime() { return getSplitNanoTime() / NANO_2_MILLIS; } /** *

* Get the split time on the stopwatch in nanoseconds. *

* *

* This is the time between start and latest split. *

* * @return the split time in nanoseconds * * @throws IllegalStateException * if the StopWatch has not yet been split. * @since 3.0 */ public long getSplitNanoTime() { if (this.splitState != SplitState.SPLIT) { throw new IllegalStateException("Stopwatch must be split to get the split time. "); } return this.stopTime - this.startTime; } /** * Returns the time this stopwatch was started. * * @return the time this stopwatch was started * @throws IllegalStateException * if this StopWatch has not been started * @since 2.4 */ public long getStartTime() { if (this.runningState == State.UNSTARTED) { throw new IllegalStateException("Stopwatch has not been started"); } // System.nanoTime is for elapsed time return this.startTimeMillis; } /** *

* Gets a summary of the time that the stopwatch recorded as a string. *

* *

* The format used is ISO 8601-like, hours:minutes:seconds.milliseconds. *

* * @return the time as a String */ @Override public String toString() { return DurationFormatUtils.formatDurationHMS(getTime()); } /** *

* Gets a summary of the split time that the stopwatch recorded as a string. *

* *

* The format used is ISO 8601-like, hours:minutes:seconds.milliseconds. *

* * @return the split time as a String * @since 2.1 */ public String toSplitString() { return DurationFormatUtils.formatDurationHMS(getSplitTime()); } /** *

* The method is used to find out if the StopWatch is started. A suspended * StopWatch is also started watch. *

* * @return boolean * If the StopWatch is started. * @since 3.2 */ public boolean isStarted() { return runningState.isStarted(); } /** *

* This method is used to find out whether the StopWatch is suspended. *

* * @return boolean * If the StopWatch is suspended. * @since 3.2 */ public boolean isSuspended() { return runningState.isSuspended(); } /** *

* This method is used to find out whether the StopWatch is stopped. The * stopwatch which's not yet started and explicitly stopped stopwatch is * considered as stopped. *

* * @return boolean * If the StopWatch is stopped. * @since 3.2 */ public boolean isStopped() { return runningState.isStopped(); } }




© 2015 - 2024 Weber Informatics LLC | Privacy Policy