com.hazelcast.config.PartitionGroupConfig Maven / Gradle / Ivy
Show all versions of hazelcast-all Show documentation
/*
* Copyright (c) 2008-2019, Hazelcast, Inc. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.hazelcast.config;
import java.util.Collection;
import java.util.Collections;
import java.util.LinkedList;
import java.util.List;
import static com.hazelcast.util.Preconditions.isNotNull;
/**
* With PartitionGroupConfig, you can control how primary and backup partitions are mapped to physical Members.
*
* Hazelcast will always place partitions on different partition groups so as to provide redundancy.
* There are three partition group schemes defined in {@link MemberGroupType}: PER_MEMBER, HOST_AWARE
* CUSTOM, ZONE_AWARE, SPI.
*
* In all cases a partition will never be created on the same group. If there are more partitions defined than
* there are partition groups, then only those partitions, up to the number of partition groups, will be created.
* For example, if you define 2 backups, then with the primary, that makes 3. If you have only two partition groups
* only two will be created.
*
*
PER_MEMBER Partition Groups
* This is the default partition scheme and is used if no other scheme is defined.
* Each Member is in a group of its own.
*
* Partitions (primaries and backups) will be distributed randomly but not on the same Member.
*
*
* <partition-group enabled="true" group-type="PER_MEMBER"/>
*
*
*
* This provides good redundancy when Members are on separate hosts but not if multiple instances are being
* run from the same host.
*
HOST_AWARE Partition Groups
* In this scheme, a group corresponds to a host, based on its IP address. Partitions will not be written to
* any other members on the same host.
*
* This scheme provides good redundancy when multiple instances are being run on the same host.
*
*
* <partition-group enabled="true" group-type="HOST_AWARE"/>
*
*
*
*
CUSTOM Partition Groups
* In this scheme, IP addresses, or IP address ranges, are allocated to groups. Partitions are not written to the same
* group. This is very useful for ensuring partitions are written to different racks or even availability zones.
*
* For example, members in data center 1 have IP addresses in the range 10.10.1.* and for data center 2 they have
* the IP address range 10.10.2.*. You would achieve HA by configuring a CUSTOM partition group as follows:
*
*
* <partition-group enabled="true" group-type="CUSTOM">
* <member-group>
* <interface>10.10.1.*</interface>
* </member-group>
* <member-group>
* <interface>10.10.2.*</interface>
* </member-group>
* </partition-group>
*
*
*
* The interfaces can be configured with wildcards ('*') and also with address ranges e.g. '10-20'. Each member-group
* can have an unlimited number of interfaces.
*
* You can define as many member-groups as you want. Hazelcast will always store backups in a different
* member-group to the primary partition.
*
*
* <partition-group enabled="true" group-type="ZONE_AWARE"/>
*
*
*
*
Zone Aware Partition Groups
* In this scheme, groups are allocated according to the metadata provided by Discovery SPI Partitions are not
* written to the same group. This is very useful for ensuring partitions are written to availability
* zones or different racks without providing the IP addresses to the config ahead.
*
*
* <partition-group enabled="true" group-type="SPI"/>
*
*
*
* SPI Aware Partition Groups
* In this scheme, groups are allocated according to the implementation provided by Discovery SPI.
*
* Overlapping Groups
* Care should be taken when selecting overlapping groups, e.g.
*
*
* <partition-group enabled="true" group-type="CUSTOM">
* <member-group>
* <interface>10.10.1.1</interface>
* <interface>10.10.1.2</interface>
* </member-group>
* <member-group>
* <interface>10.10.1.1</interface>
* <interface>10.10.1.3</interface>
* </member-group>
* </partition-group>
*
*
*
* In this example there are 2 groups, but because interface 10.10.1.1 is shared between the 2 groups, this member
* may store store primary and backups.
*/
public class PartitionGroupConfig {
private boolean enabled;
private MemberGroupType groupType = MemberGroupType.PER_MEMBER;
private final List memberGroupConfigs = new LinkedList();
/**
* Type of member groups.
*/
public enum MemberGroupType {
/**
* Host aware.
*/
HOST_AWARE,
/**
* Custom.
*/
CUSTOM,
/**
* Per member.
*/
PER_MEMBER,
/**
* Zone Aware. Backups will be created in other zones.
* If only one zone is available, backups will be created in the same zone.
*/
ZONE_AWARE,
/**
* MemberGroup implementation will be provided by the user via Discovery SPI.
*/
SPI
}
/**
* Checks if this PartitionGroupConfig is enabled.
*
* @return {@code true} if this PartitionGroupConfig is enabled, {@code false} otherwise
*/
public boolean isEnabled() {
return enabled;
}
/**
* Enables or disables this PartitionGroupConfig.
*
* @param enabled {@code true} to enable, {@code false} to disable
* @return the updated PartitionGroupConfig
*/
public PartitionGroupConfig setEnabled(final boolean enabled) {
this.enabled = enabled;
return this;
}
/**
* Returns the MemberGroupType configured. Could be {@code null} if no MemberGroupType has been configured.
*
* @return the MemberGroupType
*/
public MemberGroupType getGroupType() {
return groupType;
}
/**
* Sets the MemberGroupType. A @{link MemberGroupType#CUSTOM} indicates that custom groups are created.
* With the {@link MemberGroupType#HOST_AWARE} group type, Hazelcast makes a group for every host, that prevents
* a single host containing primary and backup. See the {@see MemberGroupConfig} for more information.
*
* @param memberGroupType the MemberGroupType to set
* @return the updated PartitionGroupConfig
* @throws IllegalArgumentException if memberGroupType is {@code null}
* @see #getGroupType()
*/
public PartitionGroupConfig setGroupType(MemberGroupType memberGroupType) {
this.groupType = isNotNull(memberGroupType, "memberGroupType");
return this;
}
/**
* Adds a {@link MemberGroupConfig}. Duplicate elements are not filtered.
*
* @param memberGroupConfig the MemberGroupConfig to add
* @return the updated PartitionGroupConfig
* @throws IllegalArgumentException if memberGroupConfig is {@code null}
* @see #addMemberGroupConfig(MemberGroupConfig)
*/
public PartitionGroupConfig addMemberGroupConfig(MemberGroupConfig memberGroupConfig) {
memberGroupConfigs.add(isNotNull(memberGroupConfig, "memberGroupConfig"));
return this;
}
/**
* Returns an unmodifiable collection containing all {@link MemberGroupConfig} elements.
*
* @return an unmodifiable collection containing all {@link MemberGroupConfig} elements
* @see #setMemberGroupConfigs(java.util.Collection)
*/
public Collection getMemberGroupConfigs() {
return Collections.unmodifiableCollection(memberGroupConfigs);
}
/**
* Removes all the {@link MemberGroupType} instances.
*
* @return the updated PartitionGroupConfig
* @see #setMemberGroupConfigs(java.util.Collection)
*/
public PartitionGroupConfig clear() {
memberGroupConfigs.clear();
return this;
}
/**
* Adds a MemberGroupConfig. This MemberGroupConfig only has meaning when the group-type is set to
* {@link MemberGroupType#CUSTOM}. See the {@link PartitionGroupConfig} for more information and examples
* of how this mechanism works.
*
* @param memberGroupConfigs the collection of MemberGroupConfig to add
* @return the updated PartitionGroupConfig
* @throws IllegalArgumentException if memberGroupConfigs is {@code null}
* @see #getMemberGroupConfigs()
* @see #clear()
* @see #addMemberGroupConfig(MemberGroupConfig)
*/
public PartitionGroupConfig setMemberGroupConfigs(Collection memberGroupConfigs) {
isNotNull(memberGroupConfigs, "memberGroupConfigs");
this.memberGroupConfigs.clear();
this.memberGroupConfigs.addAll(memberGroupConfigs);
return this;
}
@Override
public final boolean equals(Object o) {
if (this == o) {
return true;
}
if (o == null || !(o instanceof PartitionGroupConfig)) {
return false;
}
PartitionGroupConfig that = (PartitionGroupConfig) o;
if (enabled != that.enabled) {
return false;
}
if (groupType != that.groupType) {
return false;
}
return memberGroupConfigs.equals(that.memberGroupConfigs);
}
@Override
public final int hashCode() {
int result = (enabled ? 1 : 0);
result = 31 * result + (groupType != null ? groupType.hashCode() : 0);
result = 31 * result + memberGroupConfigs.hashCode();
return result;
}
@Override
public String toString() {
return "PartitionGroupConfig{"
+ "enabled=" + enabled
+ ", groupType=" + groupType
+ ", memberGroupConfigs=" + memberGroupConfigs
+ '}';
}
}