org.apache.jasper.xmlparser.UCSReader Maven / Gradle / Ivy
/*
* Copyright (c) 1997, 2018 Oracle and/or its affiliates. All rights reserved.
* Copyright 2004 The Apache Software Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.jasper.xmlparser;
import java.io.InputStream;
import java.io.IOException;
import java.io.Reader;
import java.util.logging.Logger;
import java.util.logging.Level;
/**
* Reader for UCS-2 and UCS-4 encodings.
* (i.e., encodings from ISO-10646-UCS-(2|4)).
*
* @author Neil Graham, IBM
*
* @version $Id: UCSReader.java,v 1.3 2006/03/12 01:27:12 jluehe Exp $
*/
public class UCSReader extends Reader {
private static Logger log= Logger.getLogger(UCSReader.class.getName());
//
// Constants
//
/** Default byte buffer size (8192, larger than that of ASCIIReader
* since it's reasonable to surmise that the average UCS-4-encoded
* file should be 4 times as large as the average ASCII-encoded file).
*/
public static final int DEFAULT_BUFFER_SIZE = 8192;
public static final short UCS2LE = 1;
public static final short UCS2BE = 2;
public static final short UCS4LE = 4;
public static final short UCS4BE = 8;
//
// Data
//
/** Input stream. */
protected InputStream fInputStream;
/** Byte buffer. */
protected byte[] fBuffer;
// what kind of data we're dealing with
protected short fEncoding;
//
// Constructors
//
/**
* Constructs an ASCII reader from the specified input stream
* using the default buffer size. The Endian-ness and whether this is
* UCS-2 or UCS-4 needs also to be known in advance.
*
* @param inputStream The input stream.
* @param encoding One of UCS2LE, UCS2BE, UCS4LE or UCS4BE.
*/
public UCSReader(InputStream inputStream, short encoding) {
this(inputStream, DEFAULT_BUFFER_SIZE, encoding);
} // (InputStream, short)
/**
* Constructs an ASCII reader from the specified input stream
* and buffer size. The Endian-ness and whether this is
* UCS-2 or UCS-4 needs also to be known in advance.
*
* @param inputStream The input stream.
* @param size The initial buffer size.
* @param encoding One of UCS2LE, UCS2BE, UCS4LE or UCS4BE.
*/
public UCSReader(InputStream inputStream, int size, short encoding) {
fInputStream = inputStream;
fBuffer = new byte[size];
fEncoding = encoding;
} // (InputStream,int,short)
//
// Reader methods
//
/**
* Read a single character. This method will block until a character is
* available, an I/O error occurs, or the end of the stream is reached.
*
* Subclasses that intend to support efficient single-character input
* should override this method.
*
* @return The character read, as an integer in the range 0 to 127
* (0x00-0x7f), or -1 if the end of the stream has
* been reached
*
* @exception IOException If an I/O error occurs
*/
public int read() throws IOException {
int b0 = fInputStream.read() & 0xff;
if (b0 == 0xff)
return -1;
int b1 = fInputStream.read() & 0xff;
if (b1 == 0xff)
return -1;
if(fEncoding >=4) {
int b2 = fInputStream.read() & 0xff;
if (b2 == 0xff)
return -1;
int b3 = fInputStream.read() & 0xff;
if (b3 == 0xff)
return -1;
if (log.isLoggable(Level.FINE))
log.fine("b0 is " + (b0 & 0xff) + " b1 " + (b1 & 0xff) + " b2 " + (b2 & 0xff) + " b3 " + (b3 & 0xff));
if (fEncoding == UCS4BE)
return (b0<<24)+(b1<<16)+(b2<<8)+b3;
else
return (b3<<24)+(b2<<16)+(b1<<8)+b0;
} else { // UCS-2
if (fEncoding == UCS2BE)
return (b0<<8)+b1;
else
return (b1<<8)+b0;
}
} // read():int
/**
* Read characters into a portion of an array. This method will block
* until some input is available, an I/O error occurs, or the end of the
* stream is reached.
*
* @param ch Destination buffer
* @param offset Offset at which to start storing characters
* @param length Maximum number of characters to read
*
* @return The number of characters read, or -1 if the end of the
* stream has been reached
*
* @exception IOException If an I/O error occurs
*/
public int read(char ch[], int offset, int length) throws IOException {
int byteLength = length << ((fEncoding >= 4)?2:1);
if (byteLength > fBuffer.length) {
byteLength = fBuffer.length;
}
int count = fInputStream.read(fBuffer, 0, byteLength);
if(count == -1) return -1;
// try and make count be a multiple of the number of bytes we're looking for
if(fEncoding >= 4) { // BigEndian
// this looks ugly, but it avoids an if at any rate...
int numToRead = (4 - (count & 3) & 3);
for(int i=0; i> ((fEncoding >= 4)?2:1);
int curPos = 0;
for (int i = 0; i < numChars; i++) {
int b0 = fBuffer[curPos++] & 0xff;
int b1 = fBuffer[curPos++] & 0xff;
if(fEncoding >=4) {
int b2 = fBuffer[curPos++] & 0xff;
int b3 = fBuffer[curPos++] & 0xff;
if (fEncoding == UCS4BE)
ch[offset+i] = (char)((b0<<24)+(b1<<16)+(b2<<8)+b3);
else
ch[offset+i] = (char)((b3<<24)+(b2<<16)+(b1<<8)+b0);
} else { // UCS-2
if (fEncoding == UCS2BE)
ch[offset+i] = (char)((b0<<8)+b1);
else
ch[offset+i] = (char)((b1<<8)+b0);
}
}
return numChars;
} // read(char[],int,int)
/**
* Skip characters. This method will block until some characters are
* available, an I/O error occurs, or the end of the stream is reached.
*
* @param n The number of characters to skip
*
* @return The number of characters actually skipped
*
* @exception IOException If an I/O error occurs
*/
public long skip(long n) throws IOException {
// charWidth will represent the number of bits to move
// n leftward to get num of bytes to skip, and then move the result rightward
// to get num of chars effectively skipped.
// The trick with &'ing, as with elsewhere in this dcode, is
// intended to avoid an expensive use of / that might not be optimized
// away.
int charWidth = (fEncoding >=4)?2:1;
long bytesSkipped = fInputStream.skip(n<> charWidth;
return (bytesSkipped >> charWidth) + 1;
} // skip(long):long
/**
* Tell whether this stream is ready to be read.
*
* @return True if the next read() is guaranteed not to block for input,
* false otherwise. Note that returning false does not guarantee that the
* next read will block.
*
* @exception IOException If an I/O error occurs
*/
public boolean ready() throws IOException {
return false;
} // ready()
/**
* Tell whether this stream supports the mark() operation.
*/
public boolean markSupported() {
return fInputStream.markSupported();
} // markSupported()
/**
* Mark the present position in the stream. Subsequent calls to reset()
* will attempt to reposition the stream to this point. Not all
* character-input streams support the mark() operation.
*
* @param readAheadLimit Limit on the number of characters that may be
* read while still preserving the mark. After
* reading this many characters, attempting to
* reset the stream may fail.
*
* @exception IOException If the stream does not support mark(),
* or if some other I/O error occurs
*/
public void mark(int readAheadLimit) throws IOException {
fInputStream.mark(readAheadLimit);
} // mark(int)
/**
* Reset the stream. If the stream has been marked, then attempt to
* reposition it at the mark. If the stream has not been marked, then
* attempt to reset it in some way appropriate to the particular stream,
* for example by repositioning it to its starting point. Not all
* character-input streams support the reset() operation, and some support
* reset() without supporting mark().
*
* @exception IOException If the stream has not been marked,
* or if the mark has been invalidated,
* or if the stream does not support reset(),
* or if some other I/O error occurs
*/
public void reset() throws IOException {
fInputStream.reset();
} // reset()
/**
* Close the stream. Once a stream has been closed, further read(),
* ready(), mark(), or reset() invocations will throw an IOException.
* Closing a previously-closed stream, however, has no effect.
*
* @exception IOException If an I/O error occurs
*/
public void close() throws IOException {
fInputStream.close();
} // close()
} // class UCSReader