org.h2.compress.CompressLZF Maven / Gradle / Ivy
/*
* Copyright 2004-2014 H2 Group. Multiple-Licensed under the MPL 2.0,
* and the EPL 1.0 (http://h2database.com/html/license.html).
*
* This code is based on the LZF algorithm from Marc Lehmann. It is a
* re-implementation of the C code:
* http://cvs.schmorp.de/liblzf/lzf_c.c?view=markup
* http://cvs.schmorp.de/liblzf/lzf_d.c?view=markup
*
* According to a mail from Marc Lehmann, it's OK to use his algorithm:
* Date: 2010-07-15 15:57
* Subject: Re: Question about LZF licensing
* ...
* The algorithm is not copyrighted (and cannot be copyrighted afaik) - as long
* as you wrote everything yourself, without copying my code, that's just fine
* (looking is of course fine too).
* ...
*
* Still I would like to keep his copyright info:
*
* Copyright (c) 2000-2005 Marc Alexander Lehmann
* Copyright (c) 2005 Oren J. Maurice
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
package org.h2.compress;
import java.nio.ByteBuffer;
/**
*
* This class implements the LZF lossless data compression algorithm. LZF is a
* Lempel-Ziv variant with byte-aligned output, and optimized for speed.
*
*
* Safety/Use Notes:
*
*
* - Each instance should be used by a single thread only.
* - The data buffers should be smaller than 1 GB.
* - For performance reasons, safety checks on expansion are omitted.
* - Invalid compressed data can cause an ArrayIndexOutOfBoundsException.
*
*
* The LZF compressed format knows literal runs and back-references:
*
*
* - Literal run: directly copy bytes from input to output.
* - Back-reference: copy previous data to output stream, with specified
* offset from location and length. The length is at least 3 bytes.
*
*
* The first byte of the compressed stream is the control byte. For literal
* runs, the highest three bits of the control byte are not set, the the lower
* bits are the literal run length, and the next bytes are data to copy directly
* into the output. For back-references, the highest three bits of the control
* byte are the back-reference length. If all three bits are set, then the
* back-reference length is stored in the next byte. The lower bits of the
* control byte combined with the next byte form the offset for the
* back-reference.
*
*/
public final class CompressLZF implements Compressor {
/**
* The number of entries in the hash table. The size is a trade-off between
* hash collisions (reduced compression) and speed (amount that fits in CPU
* cache).
*/
private static final int HASH_SIZE = 1 << 14;
/**
* The maximum number of literals in a chunk (32).
*/
private static final int MAX_LITERAL = 1 << 5;
/**
* The maximum offset allowed for a back-reference (8192).
*/
private static final int MAX_OFF = 1 << 13;
/**
* The maximum back-reference length (264).
*/
private static final int MAX_REF = (1 << 8) + (1 << 3);
/**
* Hash table for matching byte sequences (reused for performance).
*/
private int[] cachedHashTable;
@Override
public void setOptions(String options) {
// nothing to do
}
/**
* Return the integer with the first two bytes 0, then the bytes at the
* index, then at index+1.
*/
private static int first(byte[] in, int inPos) {
return (in[inPos] << 8) | (in[inPos + 1] & 255);
}
/**
* Return the integer with the first two bytes 0, then the bytes at the
* index, then at index+1.
*/
private static int first(ByteBuffer in, int inPos) {
return (in.get(inPos) << 8) | (in.get(inPos + 1) & 255);
}
/**
* Shift the value 1 byte left, and add the byte at index inPos+2.
*/
private static int next(int v, byte[] in, int inPos) {
return (v << 8) | (in[inPos + 2] & 255);
}
/**
* Shift the value 1 byte left, and add the byte at index inPos+2.
*/
private static int next(int v, ByteBuffer in, int inPos) {
return (v << 8) | (in.get(inPos + 2) & 255);
}
/**
* Compute the address in the hash table.
*/
private static int hash(int h) {
return ((h * 2777) >> 9) & (HASH_SIZE - 1);
}
@Override
public int compress(byte[] in, int inLen, byte[] out, int outPos) {
int inPos = 0;
if (cachedHashTable == null) {
cachedHashTable = new int[HASH_SIZE];
}
int[] hashTab = cachedHashTable;
int literals = 0;
outPos++;
int future = first(in, 0);
while (inPos < inLen - 4) {
byte p2 = in[inPos + 2];
// next
future = (future << 8) + (p2 & 255);
int off = hash(future);
int ref = hashTab[off];
hashTab[off] = inPos;
// if (ref < inPos
// && ref > 0
// && (off = inPos - ref - 1) < MAX_OFF
// && in[ref + 2] == p2
// && (((in[ref] & 255) << 8) | (in[ref + 1] & 255)) ==
// ((future >> 8) & 0xffff)) {
if (ref < inPos
&& ref > 0
&& (off = inPos - ref - 1) < MAX_OFF
&& in[ref + 2] == p2
&& in[ref + 1] == (byte) (future >> 8)
&& in[ref] == (byte) (future >> 16)) {
// match
int maxLen = inLen - inPos - 2;
if (maxLen > MAX_REF) {
maxLen = MAX_REF;
}
if (literals == 0) {
// multiple back-references,
// so there is no literal run control byte
outPos--;
} else {
// set the control byte at the start of the literal run
// to store the number of literals
out[outPos - literals - 1] = (byte) (literals - 1);
literals = 0;
}
int len = 3;
while (len < maxLen && in[ref + len] == in[inPos + len]) {
len++;
}
len -= 2;
if (len < 7) {
out[outPos++] = (byte) ((off >> 8) + (len << 5));
} else {
out[outPos++] = (byte) ((off >> 8) + (7 << 5));
out[outPos++] = (byte) (len - 7);
}
out[outPos++] = (byte) off;
// move one byte forward to allow for a literal run control byte
outPos++;
inPos += len;
// rebuild the future, and store the last bytes to the
// hashtable. Storing hashes of the last bytes in back-reference
// improves the compression ratio and only reduces speed
// slightly.
future = first(in, inPos);
future = next(future, in, inPos);
hashTab[hash(future)] = inPos++;
future = next(future, in, inPos);
hashTab[hash(future)] = inPos++;
} else {
// copy one byte from input to output as part of literal
out[outPos++] = in[inPos++];
literals++;
// at the end of this literal chunk, write the length
// to the control byte and start a new chunk
if (literals == MAX_LITERAL) {
out[outPos - literals - 1] = (byte) (literals - 1);
literals = 0;
// move ahead one byte to allow for the
// literal run control byte
outPos++;
}
}
}
// write the remaining few bytes as literals
while (inPos < inLen) {
out[outPos++] = in[inPos++];
literals++;
if (literals == MAX_LITERAL) {
out[outPos - literals - 1] = (byte) (literals - 1);
literals = 0;
outPos++;
}
}
// writes the final literal run length to the control byte
out[outPos - literals - 1] = (byte) (literals - 1);
if (literals == 0) {
outPos--;
}
return outPos;
}
/**
* Compress a number of bytes.
*
* @param in the input data
* @param inPos the offset at the input buffer
* @param out the output area
* @param outPos the offset at the output array
* @return the end position
*/
public int compress(ByteBuffer in, int inPos, byte[] out, int outPos) {
int inLen = in.capacity() - inPos;
if (cachedHashTable == null) {
cachedHashTable = new int[HASH_SIZE];
}
int[] hashTab = cachedHashTable;
int literals = 0;
outPos++;
int future = first(in, 0);
while (inPos < inLen - 4) {
byte p2 = in.get(inPos + 2);
// next
future = (future << 8) + (p2 & 255);
int off = hash(future);
int ref = hashTab[off];
hashTab[off] = inPos;
// if (ref < inPos
// && ref > 0
// && (off = inPos - ref - 1) < MAX_OFF
// && in[ref + 2] == p2
// && (((in[ref] & 255) << 8) | (in[ref + 1] & 255)) ==
// ((future >> 8) & 0xffff)) {
if (ref < inPos
&& ref > 0
&& (off = inPos - ref - 1) < MAX_OFF
&& in.get(ref + 2) == p2
&& in.get(ref + 1) == (byte) (future >> 8)
&& in.get(ref) == (byte) (future >> 16)) {
// match
int maxLen = inLen - inPos - 2;
if (maxLen > MAX_REF) {
maxLen = MAX_REF;
}
if (literals == 0) {
// multiple back-references,
// so there is no literal run control byte
outPos--;
} else {
// set the control byte at the start of the literal run
// to store the number of literals
out[outPos - literals - 1] = (byte) (literals - 1);
literals = 0;
}
int len = 3;
while (len < maxLen && in.get(ref + len) == in.get(inPos + len)) {
len++;
}
len -= 2;
if (len < 7) {
out[outPos++] = (byte) ((off >> 8) + (len << 5));
} else {
out[outPos++] = (byte) ((off >> 8) + (7 << 5));
out[outPos++] = (byte) (len - 7);
}
out[outPos++] = (byte) off;
// move one byte forward to allow for a literal run control byte
outPos++;
inPos += len;
// rebuild the future, and store the last bytes to the
// hashtable. Storing hashes of the last bytes in back-reference
// improves the compression ratio and only reduces speed
// slightly.
future = first(in, inPos);
future = next(future, in, inPos);
hashTab[hash(future)] = inPos++;
future = next(future, in, inPos);
hashTab[hash(future)] = inPos++;
} else {
// copy one byte from input to output as part of literal
out[outPos++] = in.get(inPos++);
literals++;
// at the end of this literal chunk, write the length
// to the control byte and start a new chunk
if (literals == MAX_LITERAL) {
out[outPos - literals - 1] = (byte) (literals - 1);
literals = 0;
// move ahead one byte to allow for the
// literal run control byte
outPos++;
}
}
}
// write the remaining few bytes as literals
while (inPos < inLen) {
out[outPos++] = in.get(inPos++);
literals++;
if (literals == MAX_LITERAL) {
out[outPos - literals - 1] = (byte) (literals - 1);
literals = 0;
outPos++;
}
}
// writes the final literal run length to the control byte
out[outPos - literals - 1] = (byte) (literals - 1);
if (literals == 0) {
outPos--;
}
return outPos;
}
@Override
public void expand(byte[] in, int inPos, int inLen, byte[] out, int outPos,
int outLen) {
// if ((inPos | outPos | outLen) < 0) {
if (inPos < 0 || outPos < 0 || outLen < 0) {
throw new IllegalArgumentException();
}
do {
int ctrl = in[inPos++] & 255;
if (ctrl < MAX_LITERAL) {
// literal run of length = ctrl + 1,
ctrl++;
// copy to output and move forward this many bytes
// while (ctrl-- > 0) {
// out[outPos++] = in[inPos++];
// }
System.arraycopy(in, inPos, out, outPos, ctrl);
outPos += ctrl;
inPos += ctrl;
} else {
// back reference
// the highest 3 bits are the match length
int len = ctrl >> 5;
// if the length is maxed, add the next byte to the length
if (len == 7) {
len += in[inPos++] & 255;
}
// minimum back-reference is 3 bytes,
// so 2 was subtracted before storing size
len += 2;
// ctrl is now the offset for a back-reference...
// the logical AND operation removes the length bits
ctrl = -((ctrl & 0x1f) << 8) - 1;
// the next byte augments/increases the offset
ctrl -= in[inPos++] & 255;
// copy the back-reference bytes from the given
// location in output to current position
ctrl += outPos;
if (outPos + len >= out.length) {
// reduce array bounds checking
throw new ArrayIndexOutOfBoundsException();
}
for (int i = 0; i < len; i++) {
out[outPos++] = out[ctrl++];
}
}
} while (outPos < outLen);
}
/**
* Expand a number of compressed bytes.
*
* @param in the compressed data
* @param out the output area
*/
public static void expand(ByteBuffer in, ByteBuffer out) {
do {
int ctrl = in.get() & 255;
if (ctrl < MAX_LITERAL) {
// literal run of length = ctrl + 1,
ctrl++;
// copy to output and move forward this many bytes
// (maybe slice would be faster)
for (int i = 0; i < ctrl; i++) {
out.put(in.get());
}
} else {
// back reference
// the highest 3 bits are the match length
int len = ctrl >> 5;
// if the length is maxed, add the next byte to the length
if (len == 7) {
len += in.get() & 255;
}
// minimum back-reference is 3 bytes,
// so 2 was subtracted before storing size
len += 2;
// ctrl is now the offset for a back-reference...
// the logical AND operation removes the length bits
ctrl = -((ctrl & 0x1f) << 8) - 1;
// the next byte augments/increases the offset
ctrl -= in.get() & 255;
// copy the back-reference bytes from the given
// location in output to current position
// (maybe slice would be faster)
ctrl += out.position();
for (int i = 0; i < len; i++) {
out.put(out.get(ctrl++));
}
}
} while (out.position() < out.capacity());
}
@Override
public int getAlgorithm() {
return Compressor.LZF;
}
}