com.impossibl.postgres.jdbc.xa.Base64 Maven / Gradle / Ivy
Show all versions of pgjdbc-ng Show documentation
/**
* Copyright (c) 2014, impossibl.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of impossibl.com nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*-------------------------------------------------------------------------
*
* Copyright (c) 2004-2014, PostgreSQL Global Development Group
*
*
*-------------------------------------------------------------------------
*/
package com.impossibl.postgres.jdbc.xa;
/**
* This code is a stripped down version of Robert Harder's Public Domain
* Base64 implementation. GZIP support, InputStream and OutputStream stuff
* and some unneeded encode/decode methods have been removed.
*
* -- Original comments follow --
*
* Encodes and decodes to and from Base64 notation.
*
*
* Change Log:
*
*
* - v2.1 - Cleaned up javadoc comments and unused variables and methods. Added
* some convenience methods for reading and writing to and from files.
* - v2.0.2 - Now specifies UTF-8 encoding in places where the code fails on systems
* with other encodings (like EBCDIC).
* - v2.0.1 - Fixed an error when decoding a single byte, that is, when the
* encoded data was a single byte.
* - v2.0 - I got rid of methods that used booleans to set options.
* Now everything is more consolidated and cleaner. The code now detects
* when data that's being decoded is gzip-compressed and will decompress it
* automatically. Generally things are cleaner. You'll probably have to
* change some method calls that you were making to support the new
* options format (
ints that you "OR" together).
* - v1.5.1 - Fixed bug when decompressing and decoding to a
* byte[] using
decode( String s, boolean gzipCompressed ).
* Added the ability to "suspend" encoding in the Output Stream so
* you can turn on and off the encoding if you need to embed base64
* data in an otherwise "normal" stream (like an XML file).
* - v1.5 - Output stream pases on flush() command but doesn't do anything itself.
* This helps when using GZIP streams.
* Added the ability to GZip-compress objects before encoding them.
* - v1.4 - Added helper methods to read/write files.
* - v1.3.6 - Fixed OutputStream.flush() so that 'position' is reset.
* - v1.3.5 - Added flag to turn on and off line breaks. Fixed bug in input stream
* where last buffer being read, if not completely full, was not returned.
* - v1.3.4 - Fixed when "improperly padded stream" error was thrown at the wrong time.
* - v1.3.3 - Fixed I/O streams which were totally messed up.
*
*
*
* I am placing this code in the Public Domain. Do with it as you will.
* This software comes with no guarantees or warranties but with
* plenty of well-wishing instead!
* Please visit http://iharder.net/base64
* periodically to check for updates or to contribute improvements.
*
*
* @author Robert Harder
* @author [email protected]
* @version 2.1
*/
public class Base64 {
/* ******** P U B L I C F I E L D S ******** */
/** No options specified. Value is zero. */
public static final int NO_OPTIONS = 0;
/** Specify encoding. */
public static final int ENCODE = 1;
/** Specify decoding. */
public static final int DECODE = 0;
/** Don't break lines when encoding (violates strict Base64 specification) */
public static final int DONT_BREAK_LINES = 8;
/* ******** P R I V A T E F I E L D S ******** */
/** Maximum line length (76) of Base64 output. */
private static final int MAX_LINE_LENGTH = 76;
/** The equals sign (=) as a byte. */
private static final byte EQUALS_SIGN = (byte)'=';
/** The new line character (\n) as a byte. */
private static final byte NEW_LINE = (byte)'\n';
/** Preferred encoding. */
private static final String PREFERRED_ENCODING = "UTF-8";
/** The 64 valid Base64 values. */
private static final byte[] ALPHABET;
private static final byte[] _NATIVE_ALPHABET = {/* May be something funny like EBCDIC */
(byte)'A', (byte)'B', (byte)'C', (byte)'D', (byte)'E', (byte)'F', (byte)'G',
(byte)'H', (byte)'I', (byte)'J', (byte)'K', (byte)'L', (byte)'M', (byte)'N',
(byte)'O', (byte)'P', (byte)'Q', (byte)'R', (byte)'S', (byte)'T', (byte)'U',
(byte)'V', (byte)'W', (byte)'X', (byte)'Y', (byte)'Z',
(byte)'a', (byte)'b', (byte)'c', (byte)'d', (byte)'e', (byte)'f', (byte)'g',
(byte)'h', (byte)'i', (byte)'j', (byte)'k', (byte)'l', (byte)'m', (byte)'n',
(byte)'o', (byte)'p', (byte)'q', (byte)'r', (byte)'s', (byte)'t', (byte)'u',
(byte)'v', (byte)'w', (byte)'x', (byte)'y', (byte)'z',
(byte)'0', (byte)'1', (byte)'2', (byte)'3', (byte)'4', (byte)'5',
(byte)'6', (byte)'7', (byte)'8', (byte)'9', (byte)'+', (byte)'/'
};
/** Determine which ALPHABET to use. */
static {
byte[] __bytes;
try {
__bytes = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/".getBytes(PREFERRED_ENCODING);
}
catch (java.io.UnsupportedEncodingException use) {
__bytes = _NATIVE_ALPHABET;
}
ALPHABET = __bytes;
}
/**
* Translates a Base64 value to either its 6-bit reconstruction value
* or a negative number indicating some other meaning.
*/
private static final byte[] DECODABET = {
-9, -9, -9, -9, -9, -9, -9, -9, -9, // Decimal 0 - 8
-5, -5, // Whitespace: Tab and Linefeed
-9, -9, // Decimal 11 - 12
-5, // Whitespace: Carriage Return
-9, -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, // Decimal 14 - 26
-9, -9, -9, -9, -9, // Decimal 27 - 31
-5, // Whitespace: Space
-9, -9, -9, -9, -9, -9, -9, -9, -9, -9, // Decimal 33 - 42
62, // Plus sign at decimal 43
-9, -9, -9, // Decimal 44 - 46
63, // Slash at decimal 47
52, 53, 54, 55, 56, 57, 58, 59, 60, 61, // Numbers zero through nine
-9, -9, -9, // Decimal 58 - 60
-1, // Equals sign at decimal 61
-9, -9, -9, // Decimal 62 - 64
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, // Letters 'A' through 'N'
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, // Letters 'O' through 'Z'
-9, -9, -9, -9, -9, -9, // Decimal 91 - 96
26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, // Letters 'a' through 'm'
39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, // Letters 'n' through 'z'
-9, -9, -9, -9 // Decimal 123 - 126
/*,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 127 - 139
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 140 - 152
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 153 - 165
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 166 - 178
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 179 - 191
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 192 - 204
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 205 - 217
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 218 - 230
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9, // Decimal 231 - 243
-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9,-9 // Decimal 244 - 255 */
};
// I think I end up not using the BAD_ENCODING indicator.
//private final static byte BAD_ENCODING = -9; // Indicates error in encoding
private static final byte WHITE_SPACE_ENC = -5; // Indicates white space in encoding
private static final byte EQUALS_SIGN_ENC = -1; // Indicates equals sign in encoding
/** Defeats instantiation. */
private Base64() {
}
/* ******** E N C O D I N G M E T H O D S ******** */
/**
* Encodes up to the first three bytes of array threeBytes
* and returns a four-byte array in Base64 notation.
* The actual number of significant bytes in your array is
* given by numSigBytes.
* The array threeBytes needs only be as big as
* numSigBytes.
* Code can reuse a byte array by passing a four-byte array as b4.
*
* @param b4 A reusable byte array to reduce array instantiation
* @param threeBytes the array to convert
* @param numSigBytes the number of significant bytes in your array
* @return four byte array in Base64 notation.
* @since 1.5.1
*/
private static byte[] encode3to4(byte[] b4, byte[] threeBytes, int numSigBytes) {
encode3to4(threeBytes, 0, numSigBytes, b4, 0);
return b4;
}
/**
* Encodes up to three bytes of the array source
* and writes the resulting four Base64 bytes to destination.
* The source and destination arrays can be manipulated
* anywhere along their length by specifying
* srcOffset and destOffset.
* This method does not check to make sure your arrays
* are large enough to accomodate srcOffset + 3 for
* the source array or destOffset + 4 for
* the destination array.
* The actual number of significant bytes in your array is
* given by numSigBytes.
*
* @param source the array to convert
* @param srcOffset the index where conversion begins
* @param numSigBytes the number of significant bytes in your array
* @param destination the array to hold the conversion
* @param destOffset the index where output will be put
* @return the destination array
* @since 1.3
*/
private static byte[] encode3to4(byte[] source, int srcOffset, int numSigBytes,
byte[] destination, int destOffset) {
// 1 2 3
// 01234567890123456789012345678901 Bit position
// --------000000001111111122222222 Array position from threeBytes
// --------| || || || | Six bit groups to index ALPHABET
// >>18 >>12 >> 6 >> 0 Right shift necessary
// 0x3f 0x3f 0x3f Additional AND
// Create buffer with zero-padding if there are only one or two
// significant bytes passed in the array.
// We have to shift left 24 in order to flush out the 1's that appear
// when Java treats a value as negative that is cast from a byte to an int.
int inBuff = (numSigBytes > 0 ? ((source[ srcOffset ] << 24) >>> 8) : 0)
| (numSigBytes > 1 ? ((source[ srcOffset + 1 ] << 24) >>> 16) : 0)
| (numSigBytes > 2 ? ((source[ srcOffset + 2 ] << 24) >>> 24) : 0);
switch (numSigBytes) {
case 3:
destination[ destOffset ] = ALPHABET[ inBuff >>> 18 ];
destination[ destOffset + 1 ] = ALPHABET[ (inBuff >>> 12) & 0x3f ];
destination[ destOffset + 2 ] = ALPHABET[ (inBuff >>> 6) & 0x3f ];
destination[ destOffset + 3 ] = ALPHABET[ inBuff & 0x3f ];
return destination;
case 2:
destination[ destOffset ] = ALPHABET[ inBuff >>> 18 ];
destination[ destOffset + 1 ] = ALPHABET[ (inBuff >>> 12) & 0x3f ];
destination[ destOffset + 2 ] = ALPHABET[ (inBuff >>> 6) & 0x3f ];
destination[ destOffset + 3 ] = EQUALS_SIGN;
return destination;
case 1:
destination[ destOffset ] = ALPHABET[ inBuff >>> 18 ];
destination[ destOffset + 1 ] = ALPHABET[ (inBuff >>> 12) & 0x3f ];
destination[ destOffset + 2 ] = EQUALS_SIGN;
destination[ destOffset + 3 ] = EQUALS_SIGN;
return destination;
default:
return destination;
}
}
/**
* Encodes a byte array into Base64 notation.
* Does not GZip-compress data.
*
* @param source The data to convert
* @since 1.4
*/
public static String encodeBytes(byte[] source) {
return encodeBytes(source, 0, source.length, NO_OPTIONS);
}
/**
* Encodes a byte array into Base64 notation.
*
* Valid options:
* GZIP: gzip-compresses object before encoding it.
* DONT_BREAK_LINES: don't break lines at 76 characters
* Note: Technically, this makes your encoding non-compliant.
*
*
* Example: encodeBytes( myData, Base64.GZIP ) or
*
* Example: encodeBytes( myData, Base64.GZIP | Base64.DONT_BREAK_LINES )
*
*
* @param source The data to convert
* @param options Specified options
* @see Base64#DONT_BREAK_LINES
* @since 2.0
*/
public static String encodeBytes(byte[] source, int options) {
return encodeBytes(source, 0, source.length, options);
}
/**
* Encodes a byte array into Base64 notation.
* Does not GZip-compress data.
*
* @param source The data to convert
* @param off Offset in array where conversion should begin
* @param len Length of data to convert
* @since 1.4
*/
public static String encodeBytes(byte[] source, int off, int len) {
return encodeBytes(source, off, len, NO_OPTIONS);
}
/**
* Encodes a byte array into Base64 notation.
*
* Valid options:
* GZIP: gzip-compresses object before encoding it.
* DONT_BREAK_LINES: don't break lines at 76 characters
* Note: Technically, this makes your encoding non-compliant.
*
*
* Example: encodeBytes( myData, Base64.GZIP ) or
*
* Example: encodeBytes( myData, Base64.GZIP | Base64.DONT_BREAK_LINES )
*
*
* @param source The data to convert
* @param off Offset in array where conversion should begin
* @param len Length of data to convert
* @param options Specified options
* @see Base64#DONT_BREAK_LINES
* @since 2.0
*/
public static String encodeBytes(byte[] source, int off, int len, int options) {
// Isolate options
int dontBreakLines = options & DONT_BREAK_LINES;
// Else, don't compress. Better not to use streams at all then.
{
// Convert option to boolean in way that code likes it.
boolean breakLines = dontBreakLines == 0;
int len43 = len * 4 / 3;
byte[] outBuff = new byte[(len43) // Main 4:3
+ ((len % 3) > 0 ? 4 : 0) // Account for padding
+ (breakLines ? (len43 / MAX_LINE_LENGTH) : 0)]; // New lines
int d = 0;
int e = 0;
int len2 = len - 2;
int lineLength = 0;
for ( ; d < len2; d += 3, e += 4) {
encode3to4(source, d + off, 3, outBuff, e);
lineLength += 4;
if (breakLines && lineLength == MAX_LINE_LENGTH) {
outBuff[e + 4] = NEW_LINE;
e++;
lineLength = 0;
}
}
if (d < len) {
encode3to4(source, d + off, len - d, outBuff, e);
e += 4;
}
// Return value according to relevant encoding.
try {
return new String(outBuff, 0, e, PREFERRED_ENCODING);
}
catch (java.io.UnsupportedEncodingException uue) {
return new String(outBuff, 0, e);
}
}
}
/* ******** D E C O D I N G M E T H O D S ******** */
/**
* Decodes four bytes from array source
* and writes the resulting bytes (up to three of them)
* to destination.
* The source and destination arrays can be manipulated
* anywhere along their length by specifying
* srcOffset and destOffset.
* This method does not check to make sure your arrays
* are large enough to accomodate srcOffset + 4 for
* the source array or destOffset + 3 for
* the destination array.
* This method returns the actual number of bytes that
* were converted from the Base64 encoding.
*
*
* @param source the array to convert
* @param srcOffset the index where conversion begins
* @param destination the array to hold the conversion
* @param destOffset the index where output will be put
* @return the number of decoded bytes converted
* @since 1.3
*/
private static int decode4to3(byte[] source, int srcOffset, byte[] destination, int destOffset) {
// Example: Dk==
if (source[srcOffset + 2] == EQUALS_SIGN) {
int outBuff = ((DECODABET[source[srcOffset]] & 0xFF) << 18)
| ((DECODABET[source[srcOffset + 1]] & 0xFF) << 12);
destination[destOffset] = (byte)(outBuff >>> 16);
return 1;
}
// Example: DkL=
else if (source[ srcOffset + 3 ] == EQUALS_SIGN) {
int outBuff = ((DECODABET[source[srcOffset]] & 0xFF) << 18)
| ((DECODABET[source[srcOffset + 1]] & 0xFF) << 12)
| ((DECODABET[source[srcOffset + 2]] & 0xFF) << 6);
destination[destOffset] = (byte)(outBuff >>> 16);
destination[destOffset + 1] = (byte)(outBuff >>> 8);
return 2;
}
// Example: DkLE
else {
try {
int outBuff = (DECODABET[source[srcOffset]] & 0xFF) << 18
| (DECODABET[source[srcOffset + 1]] & 0xFF) << 12
| (DECODABET[source[srcOffset + 2]] & 0xFF) << 6
| DECODABET[source[srcOffset + 3]] & 0xFF;
destination[destOffset] = (byte)(outBuff >> 16);
destination[destOffset + 1] = (byte)(outBuff >> 8);
destination[destOffset + 2] = (byte)(outBuff);
return 3;
}
catch (Exception e) {
System.out.println(Byte.toString(source[srcOffset]) + ": " + Byte.toString(DECODABET[source[srcOffset]]));
System.out.println(Byte.toString(source[srcOffset + 1]) + ": " + Byte.toString(DECODABET[source[srcOffset + 1]]));
System.out.println(Byte.toString(source[srcOffset + 2]) + ": " + Byte.toString(DECODABET[source[srcOffset + 2]]));
System.out.println(Byte.toString(source[srcOffset + 3]) + ": " + Byte.toString(DECODABET[source[srcOffset + 3]]));
return -1;
}
}
}
/**
* Very low-level access to decoding ASCII characters in
* the form of a byte array. Does not support automatically
* gunzipping or any other "fancy" features.
*
* @param source The Base64 encoded data
* @param off The offset of where to begin decoding
* @param len The length of characters to decode
* @return decoded data
* @since 1.3
*/
public static byte[] decode(byte[] source, int off, int len) {
int len34 = len * 3 / 4;
byte[] outBuff = new byte[ len34 ]; // Upper limit on size of output
int outBuffPosn = 0;
byte[] b4 = new byte[4];
int b4Posn = 0;
int i;
byte sbiCrop;
byte sbiDecode;
for (i = off; i < off + len; i++) {
sbiCrop = (byte)(source[i] & 0x7f); // Only the low seven bits
sbiDecode = DECODABET[ sbiCrop ];
if (sbiDecode >= WHITE_SPACE_ENC) { // White space, Equals sign or better
if (sbiDecode >= EQUALS_SIGN_ENC) {
b4[ b4Posn++ ] = sbiCrop;
if (b4Posn > 3) {
outBuffPosn += decode4to3(b4, 0, outBuff, outBuffPosn);
b4Posn = 0;
// If that was the equals sign, break out of 'for' loop
if (sbiCrop == EQUALS_SIGN)
break;
}
}
}
else {
System.err.println("Bad Base64 input character at " + i + ": " + source[i] + "(decimal)");
return null;
}
}
byte[] out = new byte[ outBuffPosn ];
System.arraycopy(outBuff, 0, out, 0, outBuffPosn);
return out;
}
/**
* Decodes data from Base64 notation, automatically
* detecting gzip-compressed data and decompressing it.
*
* @param s the string to decode
* @return the decoded data
* @since 1.4
*/
public static byte[] decode(String s) {
byte[] bytes;
try {
bytes = s.getBytes(PREFERRED_ENCODING);
}
catch (java.io.UnsupportedEncodingException uee) {
bytes = s.getBytes();
}
// Decode
bytes = decode(bytes, 0, bytes.length);
return bytes;
}
}