Many resources are needed to download a project. Please understand that we have to compensate our server costs. Thank you in advance. Project price only 1 $
You can buy this project and download/modify it how often you want.
{
"confirm.expired_confirm": "Confirmation has expired, please run the command again!",
"confirm.failed_confirm": "You have no pending actions to confirm!",
"confirm.requires_confirm": "Are you sure you wish to execute: ?\nThis cannot be undone! If you are sure: \nThe request times out in seconds. ",
"move.move_success": "Successfully moved the plot -> ",
"move.move_merged": "Merged plots may not be moved. Please unmerge the plot before performing the move.",
"move.copy_success": "Successfully copied plots -> ",
"move.requires_unowned": "The location specified is already occupied.",
"debug.requires_unmerged": "The plot cannot be merged.",
"debug.debug_header": "Debug Information\n",
"debug.debug_section": ">>",
"debug.debug_line": ">>:\n",
"debug.plot_debug": "[Plot Debug] (): ",
"debug.fetching_loaded_chunks": "Fetching loaded chunks...",
"debug.cached_uuids": "There are cached UUIDs.",
"debug.player_in_debugmode": "Player(s) in debug mode: ",
"debug.player_in_debugmode_list": "- \n",
"debug.entity_categories": "Entity categories:",
"set.set_attribute": "Successfully set to .",
"area.set_pos2": "You will now set pos2: . Note: The chosen plot size may result in the created area not exactly matching your second position.",
"web.generating_link": "Processing plot ",
"web.plot_merged": "This plot is merged and therefore cannot be downloaded",
"web.generating_link_failed": "Failed to generate download link for plot !",
"web.generation_link_success": "Download: '> \n Deletion: '>\nAttention: Opening the deletion link will delete the file immediately.",
"web.generation_link_success_legacy_world": "Download: '>",
"web.save_failed": "Failed to save.",
"web.load_null": "Please use to get a list of schematics.",
"web.load_failed": "Failed to load schematic.",
"web.load_list": "To load a schematic, use .",
"web.save_success": "Successfully saved!",
"compass.compass_target": "Successfully targeted plot with your compass.",
"cluster.cluster_available_args": "The following sub commands are available: ",
"cluster.cluster_list_heading": "There are cluster(s) in this world.",
"cluster.cluster_list_element": " - \n",
"cluster.cluster_list_element_owner": " - \n",
"cluster.cluster_list_element_helpers": " - \n",
"cluster.cluster_list_element_invited": " - \n",
"cluster.cluster_intersection": "The proposed area overlaps with: ",
"cluster.cluster_outside": "The proposed area is outside the plot area: ",
"cluster.cluster_created": "Successfully created the cluster .",
"cluster.cluster_deleted": "Successfully deleted the cluster .",
"cluster.cluster_resized": "Successfully resized the cluster.",
"cluster.cluster_added_user": "Successfully added user to the cluster.",
"cluster.cannot_kick_player": "You cannot kick the player .",
"cluster.cluster_invited": "You have been invited to the following cluster: .",
"cluster.cluster_removed": "You have been removed from cluster: .",
"cluster.cluster_kicked_user": "Successfully kicked the user from the cluster.",
"cluster.invalid_cluster_name": "Invalid cluster name: ",
"cluster.cluster_not_added": "That player was not added to the plot cluster.",
"cluster.cluster_cannot_leave": "You must delete or transfer ownership before leaving the cluster.",
"cluster.cluster_added_helper": "Successfully added a helper to the cluster.",
"cluster.cluster_removed_helper": "Successfully removed a helper from the cluster.",
"cluster.cluster_regenerated": "Successfully started cluster regeneration.",
"cluster.cluster_teleporting": "Teleporting...",
"cluster.cluster_info": "Current cluster: \nName: \nOwner: \nSize: \nRights: ",
"border.denied": "You are outside the current map border.",
"border.bypass.exited": "You have bypassed the current map border area.",
"border.bypass.entered": "You have re-entered the current map border area.",
"worldedit.worldedit_bypass": "To bypass your restrictions use ",
"worldedit.worldedit_bypassed": "Currently bypassing WorldEdit restriction.",
"gamemode.gamemode_was_bypassed": "You bypassed the gamemode () set for .",
"height.height_limit": "This plot area has building height limits: Min height: , Max height: ",
"notification.notify_enter": " entered your plot (;).",
"notification.notify_leave": " left your plot (;).",
"swap.swap_overlap": "The proposed areas are not allowed to overlap.",
"swap.swap_success": "Successfully swapped plots -> ",
"swap.swap_merged": "Merged plots may not be swapped. Please unmerge the plots before performing the swap.",
"swap.progress_region1_copy": "Current region 1 copy progress: %",
"swap.progress_region2_copy": "Current region 2 copy progress: %",
"swap.progress_region1_paste": "Current region 1 paste progress: %",
"swap.progress_region2_paste": "Current region 2 paste progress: %",
"swap.progress_region_copy": "Current copy progress: %",
"swap.progress_region_paste": "Current paste progress: %",
"comment.inbox_notification": "unread messages. Use .",
"comment.not_valid_inbox_index": "No comment at index .",
"comment.inbox_item": " - ",
"comment.comment_syntax": "Use <> ",
"comment.invalid_inbox": "That is not a valid inbox.\nAccepted values: ",
"comment.no_perm_inbox": "You do not have permission for that inbox.",
"comment.no_perm_inbox_modify": "You do not have permission to modify that inbox.",
"comment.no_plot_inbox": "You must stand in or supply a plot argument",
"comment.comment_removed_success": "Successfully deleted comment(s)\n - ",
"comment.comment_removed_failure": "Failed to delete comment!",
"comment.comment_added": "A comment has been left.",
"comment.inbox_empty": "No comments.",
"console.not_console": "For safety reasons, this command can only be executed by console.",
"console.is_console": "This command can only be executed by a player.",
"clipboard.paste_failed": "Failed to paste the selection. Reason: ",
"toggle.toggle_enabled": "Enabled setting: ",
"toggle.toggle_disabled": "Disabled setting: ",
"blockedcmds.command_blocked": "That command is not allowed in this plot.",
"done.done_already_done": "This plot is already marked as done.",
"done.done_not_done": "This plot is not marked as done.",
"done.done_insufficient_complexity": "This plot is too simple. Please add more detail before using this command.",
"done.done_success": "Successfully marked this plot as done.",
"done.done_removed": "You may now continue building in this plot.",
"done.building_restricted": "You can't build on plots marked as done.",
"ratings.ratings_purged": "Purged ratings for this plot.",
"ratings.rating_not_valid": "You need to specify a number between 1 and 10.",
"ratings.rating_already_exists": "You have already rated plot .",
"ratings.rating_applied": "You successfully rated plot .",
"ratings.rating_disliked": "You successfully disliked plot .",
"ratings.rating_liked": "You successfully liked plot .",
"ratings.rating_not_your_own": "You cannot rate your own plot.",
"ratings.rating_not_done": "You can only rate finished plots.",
"ratings.rating_not_owned": "You cannot rate a plot that is not claimed by anyone.",
"ratings.0-8": "0/8",
"ratings.1-8": "1/8",
"ratings.2-8": "2/8",
"ratings.3-8": "3/8",
"ratings.4-8": "4/8",
"ratings.5-8": "5/8",
"ratings.6-8": "6/8",
"ratings.7-8": "7/8",
"ratings.8-8": "8/8",
"tutorial.rate_this": "Rate this plot!",
"tutorial.comment_this": "Leave some feedback on this plot: .",
"economy.econ_disabled": "Economy is not enabled.",
"economy.vault_or_consumer_null": "Economy isn't initialized. Make sure Vault and an economy service plugin are installed.",
"economy.cannot_afford_plot": "You cannot afford to buy this plot. It costs . You have .",
"economy.not_for_sale": "This plot is not for sale.",
"economy.cannot_buy_own": "You cannot buy your own plot.",
"economy.plot_sold": "Your plot, , has been sold to for .",
"economy.cannot_afford_merge": "You cannot afford to merge the plots. It costs .",
"economy.added_balance": "has been added to your balance.",
"economy.removed_balance": "has been taken from your balance.",
"economy.removed_granted_plot": "You used plot grant(s), you've got left.",
"economy.cannot_buy_blocked": "You are not allowed to buy this plot.",
"setup.choose_generator": "What generator do you want?",
"setup.setup_not_started": "No setup started.",
"setup.setup_init": "Usage: /plot setup ",
"setup.setup_step": "[Step ]- Expecting: Default: ",
"setup.setup_valid_arg": "Value set to .",
"setup.setup_finished": "You should have been teleported to the created world. Otherwise you will need to set the generator manually using the bukkit.yml or your chosen world management plugin.",
"setup.setup_world_taken": "is already a world. Choose a different name.",
"setup.setup_cancelled": "Cancelled setup.",
"setup.setup_world_name": "What do you want your world to be called?",
"setup.setup_world_name_error": "You need to choose a world name!",
"setup.setup_world_generator_error": "You must choose a generator!",
"setup.setup_world_type": "What world type do you want?\n - normal - Standard plot generation\n - augmented - Plot generation with terrain\n - partial - Vanilla with clusters of plots",
"setup.setup_world_type_error": "You must choose a world type!",
"setup.setup_wrong_generator": "The specified generator does not identify as BukkitPlotGenerator - You may need to manually configure the other plugin.",
"setup.setup_world_name_format": "Non [a-z0-9_.-] character in the world name: ",
"setup.setup_world_apply_plotsquared": "The world you specified already exists. After restarting, new terrain will use PlotSquared, however you may need to reset the world for it to generate correctly!",
"setup.setup_partial_area": "What terrain would you like in plots?\n - ROAD - Terrain separated by roads\n - ALL - Entirely vanilla generation",
"setup.setup_partial_area_error": "You must choose the terrain!",
"setup.setup_area_name": "What would you like this area called?",
"setup.setup_area_non_alphanumerical": "The area ID must be alphanumerical!",
"setup.setup_area_invalid_id": "You must choose an area id that is not in use!",
"setup.setup_area_min_plot_id": "What should be the minimum Plot ID?",
"setup.setup_area_min_plot_id_error": "You must choose a valid minimum Plot ID!",
"setup.setup_area_max_plot_id": "What should be the maximum Plot ID?",
"setup.setup_area_max_plot_id_error": "You must choose a valid maximum Plot ID!",
"setup.setup_area_plot_id_greater_than_minimum": "The maximum Plot ID must be greater than the minimum!",
"setup.plot_height": "Plot height",
"setup.plot_width": "Plot width",
"setup.plot_block": "Plot block (Block(s) to fill the plot with from Y0 to the defined plot height (Set in a previous step))",
"setup.top_block_boolean": "Whether a layer of blocks should be put on top of the plot block",
"setup.plot_block_floor": "Plot floor block (One layer of blocks put on top of the plot block)",
"setup.top_wall_block": "Top wall block (Block(s) shaping the border of an unclaimed plot)",
"setup.wall_block_claimed": "Wall block (claimed) (Block(s) shaping the border of a claimed plot)",
"setup.road_width": "Road width",
"setup.road_height": "Road height",
"setup.road_block": "Road block",
"setup.wall_filling_block": "Wall filling block (Block(s) been put under the plot border down to min gen height + 1)",
"setup.wall_height": "Wall height",
"setup.min_gen_height": "Minimum height from which to generate (for 1.18+ can be negative).",
"setup.bedrock_boolean": "Whether a bedrock layer under the plot should be generated or not",
"setup.component_below_bedrock_boolean": "Whether a component change e.g. /plot set walls should edit the bedrock layer or below",
"setup.singleplotarea_void_world": "Void world",
"plotareatype.plot_area_type_normal": "Standard plot generation",
"plotareatype.plot_area_type_augmented": "Plot generation with vanilla terrain",
"plotareatype.plot_area_type_partial": "Vanilla with clusters of plots",
"schematics.schematic_too_large": "The plot is too large for this action!",
"schematics.schematic_size_mismatch": "The schematic's size does not match the plot's. If you want to paste anyway, enable schematics.paste-mismatches in settings.yml",
"schematics.schematic_invalid": "That is not a valid schematic. Reason: .",
"schematics.schematic_invalid_named": " is not a valid schematic. Reason: .",
"schematics.schematic_paste_merged": "Schematics cannot be pasted onto merged plots. Please unmerge the plot before performing the paste.",
"schematics.schematic_paste_failed": "Failed to paste the schematic.",
"schematics.schematic_paste_success": "The schematic pasted successfully.",
"schematics.schematic_list": "Saved Schematics: ",
"schematics.mca_file_size": "Note: The `.mca` files are 512x512.",
"schematics.schematic_exportall_started": "Starting export...",
"schematics.schematic_exportall_world_args": "Need world argument",
"schematics.schematic_exportall_finished": "Finished mass export.",
"schematics.schematic_exportall_single_finished": "Finished export.",
"schematic.schematic_exportall_world": "Invalid world.",
"schematics.plot_to_schem": "Plot->Schematic: Found plots...",
"error.task_in_process": "Task is already running.",
"titles.title_entered_plot": "Plot: ;",
"titles.title_entered_plot_sub": "Owned by ",
"core.prefix": "[P2] ",
"core.enabled": " is now enabled.",
"placeholder.hooked": "PlotSquared hooked into MVdWPlaceholderAPI",
"placeholder.nan": "Not a number",
"reload.reloaded_configs": "Translations and world settings have been reloaded successfully.",
"reload.reload_failed": "Failed to reload file configurations.",
"desc.desc_set": "Plot description set.",
"desc.desc_unset": "Plot description unset.",
"alias.alias_set_to": "Plot alias set to .",
"alias.alias_removed": "Plot alias removed.",
"alias.alias_too_long": "The alias must have less than 50 characters in length.",
"alias.alias_is_taken": "That alias is already taken.",
"alias.no_alias_set": "No plot alias set.",
"position.position_set": "Home position set to your current location.",
"position.position_unset": "Home position reset to the default location.",
"permission.no_schematic_permission": "You don't have the permission required to use schematic .",
"permission.no_permission": "You are lacking the permission node: .",
"permission.no_permission_event": "You are lacking the permission node: .",
"permission.no_plot_perms": "You must be the plot owner to perform this action.",
"permission.cant_claim_more_plots": "You can't claim more than plots.",
"permission.cant_claim_more_clusters": "You can't claim more than clusters.",
"permission.cant_transfer_more_plots": "You can't send more plots to that user.",
"permission.cant_claim_more_plots_num": "You can't claim more than plots at once.",
"merge.merge_request_confirm": "Merge request from for plot",
"merge.merge_not_valid": "This merge request is no longer valid.",
"merge.merge_accepted": "The merge request has been accepted.",
"merge.success_merge": "Plots have been merged!",
"merge.merge_requested": "Successfully sent a merge request.",
"merge.no_available_automerge": "You do not own any adjacent plots in the specified direction or are not allowed to merge to the required size.",
"merge.unlink_impossible": "You can only unlink a mega-plot.",
"merge.unmerge_cancelled": "Unlink has been cancelled.",
"merge.unlink_success": "Successfully unlinked plots.",
"commandconfig.not_valid_subcommand": "That is not a valid subcommand.",
"commandconfig.did_you_mean": "Did you mean: ",
"commandconfig.subcommand_set_options_header": "Possible Values: ",
"commandconfig.subcommand_set_options_header_only": "Possible Values: ",
"commandconfig.command_syntax": "Usage: ",
"commandconfig.command_syntax_extended": "Usage: ",
"commandconfig.flag_tutorial_usage": "The plot flag is not set preventing you from performing this action.",
"invalid.component_illegal_block": "You are not allowed to generate a component containing the block ",
"invalid.not_valid_block": "",
"invalid.not_allowed_block": "That block is not allowed: ",
"invalid.not_valid_number": "That's not a valid number within the range: ",
"invalid.not_valid_plot_id": "That's not a valid plot ID.",
"invalid.origin_cant_be_target": "The origin and target location cannot be the same.",
"invalid.found_no_plots": "Found no plots with your search query.",
"invalid.number_not_in_range": "That's not a valid number within the range: (, )",
"invalid.number_not_positive": "That's not a positive number: ",
"invalid.not_a_number": " is not a valid number.",
"condense.invalid_area": "Invalid area.",
"condense.task_already_started": "Task already started.",
"condense.invalid_radius": "Invalid radius.",
"condense.radius_too_small": "Radius too small.",
"condense.no_free_plots_found": "No free plots found.",
"condense.task_started": "Task started...",
"condense.task_complete": "Task complete. Please verify that no new plots have been claimed during the task.",
"condense.moving": "Moving: -> ",
"condense.task_failed": "Task failed. No free plots found.",
"condense.skipping": "Skipping complex plot: .",
"condense.task_stopped": "Task already stopped.",
"condense.default_eval": "=== DEFAULT EVAL ===",
"condense.minimum_radius": "Minimum radius: ",
"condense.maximum_moved": "Maximum moved: ",
"condense.input_eval": "=== INPUT EVAL ===",
"condense.input_radius": "Input radius: ",
"condense.estimated_moves": "Estimated moves: ",
"condense.eta": "Estimated time: No idea, times will drastically change based on the system performance and load.",
"condense.radius_measured": " - Radius is measured in plot width.",
"database.starting_conversion": "Starting...",
"database.conversion_done": "Database conversion finished.",
"database.conversion_failed": "Failed to insert plot objects, see stacktrace for info.",
"database.arg": "[arg] indicates an optional argument.",
"database.does_not_exist": "Database does not exist: .",
"database.failed_to_save_plots": "Failed to save plots, read stacktrace for info.",
"database.invalid_args": "Please make sure you are using the correct arguments.",
"database.failed_to_open": "Failed to open connection, read stacktrace for info.",
"database.skipping_duplicated_plot": "Skipping duplicate plot: | ID: ",
"template.invalid_template": "Invalid template file: .template",
"template.template_failed": "Failed: ",
"debugexec.changes_column": "Changes/column: ",
"debugexec.starting_task": "Starting task...",
"debugexec.threshold_default": "`threshold` = The percentage of plots you want to clear (100 clears 100% of plots so no point calibrating it.",
"debugexec.invalid_threshold": "Invalid threshold: ",
"debugexec.threshold_default_double": "= The percentage of plots you want to clear as a number between 0 - 100.",
"debugexec.calibration_done": "Thank you for calibrating plot expiry.",
"debugexec.task_halted": "Task already halted.",
"debugexec.task_cancelled": "Task cancelled.",
"debugexec.cleared_flag": "Cleared flag: ",
"debugexec.mass_schematic_update_in_progress": "Cannot schedule mass schematic update. (Is one already in progress?)",
"debugexec.task_not_running": "Task not running.",
"debugexec.expiry_started": "
