org.apache.qpid.proton.engine.Transport Maven / Gradle / Ivy
/*
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing,
* software distributed under the License is distributed on an
* "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
* KIND, either express or implied. See the License for the
* specific language governing permissions and limitations
* under the License.
*
*/
package org.apache.qpid.proton.engine;
import java.nio.ByteBuffer;
import org.apache.qpid.proton.amqp.transport.ErrorCondition;
import org.apache.qpid.proton.engine.impl.TransportImpl;
/**
*
* Operates on the entities in the associated {@link Connection}
* by accepting and producing binary AMQP output, potentially
* layered within SASL and/or SSL.
*
*
* After a connection is bound with {@link #bind(Connection)}, the methods for accepting and producing
* output are typically repeatedly called. See the specific methods for details of their legal usage.
*
*
* Processing the input data received from another AMQP container.
*
*
* - {@link #getInputBuffer()}
* - Write data into input buffer
* - {@link #processInput()}
* - Check the result, e.g. by calling {@link TransportResult#checkIsOk()}
*
*
* Getting the output data to send to another AMQP container:
*
*
* - {@link #getOutputBuffer()}
* - Read output from output buffer
* - {@link #outputConsumed()}
*
*
* The following methods on the byte buffers returned by {@link #getInputBuffer()} and {@link #getOutputBuffer()}
* must not be called:
*
*
* - {@link ByteBuffer#clear()}
* - {@link ByteBuffer#compact()}
* - {@link ByteBuffer#flip()}
* - {@link ByteBuffer#mark()}
*
*/
public interface Transport extends Endpoint
{
public static final class Factory
{
public static Transport create() {
return new TransportImpl();
}
}
public static final int TRACE_OFF = 0;
public static final int TRACE_RAW = 1;
public static final int TRACE_FRM = 2;
public static final int TRACE_DRV = 4;
public static final int DEFAULT_MAX_FRAME_SIZE = -1;
/** the lower bound for the agreed maximum frame size (in bytes). */
public int MIN_MAX_FRAME_SIZE = 512;
public int SESSION_WINDOW = 16*1024;
public int END_OF_STREAM = -1;
public void trace(int levels);
public void bind(Connection connection);
public void unbind();
public int capacity();
public ByteBuffer tail();
public void process() throws TransportException;
public void close_tail();
public int pending();
public ByteBuffer head();
public void pop(int bytes);
public void close_head();
public boolean isClosed();
/**
* Processes the provided input.
*
* @param bytes input bytes for consumption
* @param offset the offset within bytes where input begins
* @param size the number of bytes available for input
*
* @return the number of bytes consumed
* @throws TransportException if the input is invalid, if the transport is already in an error state,
* or if the input is empty (unless the remote connection is already closed)
* @deprecated use {@link #getInputBuffer()} and {@link #processInput()} instead.
*/
@Deprecated
public int input(byte[] bytes, int offset, int size);
/**
* Get a buffer that can be used to write input data into the transport.
* Once the client has finished putting into the input buffer, {@link #processInput()}
* must be called.
*
* Successive calls to this method are not guaranteed to return the same object.
* Once {@link #processInput()} is called the buffer must not be used.
*
* @throws TransportException if the transport is already in an invalid state
*/
ByteBuffer getInputBuffer();
/**
* Tell the transport to process the data written to the input buffer.
*
* If the returned result indicates failure, the transport will not accept any more input.
* Specifically, any subsequent {@link #processInput()} calls on this object will
* throw an exception.
*
* @return the result of processing the data, which indicates success or failure.
* @see #getInputBuffer()
*/
TransportResult processInput();
/**
* Has the transport produce up to size bytes placing the result
* into dest beginning at position offset.
*
* @param dest array for output bytes
* @param offset the offset within bytes where output begins
* @param size the maximum number of bytes to be output
*
* @return the number of bytes written
* @deprecated use {@link #getOutputBuffer()} and {@link #outputConsumed()} instead
*/
@Deprecated
public int output(byte[] dest, int offset, int size);
/**
* Get a read-only byte buffer containing the transport's pending output.
* Once the client has finished getting from the output buffer, {@link #outputConsumed()}
* must be called.
*
* Successive calls to this method are not guaranteed to return the same object.
* Once {@link #outputConsumed()} is called the buffer must not be used.
*
* If the transport's state changes AFTER calling this method, this will not be
* reflected in the output buffer.
*/
ByteBuffer getOutputBuffer();
/**
* Informs the transport that the output buffer returned by {@link #getOutputBuffer()}
* is finished with, allowing implementation-dependent steps to be performed such as
* reclaiming buffer space.
*/
void outputConsumed();
/**
* Signal the transport to expect SASL frames used to establish a SASL layer prior to
* performing the AMQP protocol version negotiation. This must first be performed before
* the transport is used for processing. Subsequent invocations will return the same
* {@link Sasl} object.
*
* @throws IllegalStateException if transport processing has already begun prior to initial invocation
*/
Sasl sasl() throws IllegalStateException;
/**
* Wrap this transport's output and input to apply WebSocket wrapBuffer and unwrapBuffer respectively.
*
* This method is expected to be called at most once. A subsequent invocation will return the same
* {@link WebSocket} object, regardless of the parameters supplied.
*/
WebSocket webSocket();
/**
* Wrap this transport's output and input to apply SSL encryption and decryption respectively.
*
* This method is expected to be called at most once. A subsequent invocation will return the same
* {@link Ssl} object, regardless of the parameters supplied.
*
* @param sslDomain the SSL settings to use
* @param sslPeerDetails may be null, in which case SSL session resume will not be attempted
* @return an {@link Ssl} object representing the SSL session.
*/
Ssl ssl(SslDomain sslDomain, SslPeerDetails sslPeerDetails);
/**
* As per {@link #ssl(SslDomain, SslPeerDetails)} but no attempt is made to resume a previous SSL session.
*/
Ssl ssl(SslDomain sslDomain);
/**
* Get the maximum frame size for the transport
*
* @return the maximum frame size
*/
int getMaxFrameSize();
void setMaxFrameSize(int size);
int getRemoteMaxFrameSize();
/**
* Gets the local channel-max value to be advertised to the remote peer
*
* @return the local channel-max value
* @see #setChannelMax(int)
*/
int getChannelMax();
/**
* Set the local value of channel-max, to be advertised to the peer on the
*
* Open frame emitted by the transport.
*
* The remote peers advertised channel-max can be observed using {@link #getRemoteChannelMax()}.
*
* @param channelMax the local channel-max to advertise to the peer, in range [0 - 2^16).
* @throws IllegalArgumentException if the value supplied is outside range [0 - 2^16).
*/
void setChannelMax(int channelMax);
/**
* Gets the remote value of channel-max, as advertised by the peer on its
*
* Open frame.
*
* The local peers advertised channel-max can be observed using {@link #getChannelMax()}.
*
* @return the remote channel-max value
*/
int getRemoteChannelMax();
ErrorCondition getCondition();
/**
*
* @param timeout local idle timeout in milliseconds
*/
void setIdleTimeout(int timeout);
/**
*
* @return local idle timeout in milliseconds
*/
int getIdleTimeout();
/**
*
* @return remote idle timeout in milliseconds
*/
int getRemoteIdleTimeout();
long tick(long now);
long getFramesInput();
long getFramesOutput();
/**
* Configure whether a synthetic Flow event should be emitted when messages are sent,
* reflecting a change in the credit level on the link that may prompt other action.
*
* Defaults to true.
*
* @param emitFlowEventOnSend true if a flow event should be emitted, false otherwise
*/
void setEmitFlowEventOnSend(boolean emitFlowEventOnSend);
boolean isEmitFlowEventOnSend();
}