com.netflix.hystrix.util.HystrixRollingNumber Maven / Gradle / Ivy
Show all versions of hystrix-core Show documentation
/**
* Copyright 2012 Netflix, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.netflix.hystrix.util;
import java.util.ArrayList;
import java.util.Arrays;
import java.util.Collections;
import java.util.Iterator;
import java.util.concurrent.atomic.AtomicReference;
import java.util.concurrent.atomic.AtomicReferenceArray;
import java.util.concurrent.locks.ReentrantLock;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import com.netflix.hystrix.strategy.properties.HystrixProperty;
/**
* A number which can be used to track counters (increment) or set values over time.
*
* It is "rolling" in the sense that a 'timeInMilliseconds' is given that you want to track (such as 10 seconds) and then that is broken into buckets (defaults to 10) so that the 10 second window
* doesn't empty out and restart every 10 seconds, but instead every 1 second you have a new bucket added and one dropped so that 9 of the buckets remain and only the newest starts from scratch.
*
* This is done so that the statistics are gathered over a rolling 10 second window with data being added/dropped in 1 second intervals (or whatever granularity is defined by the arguments) rather
* than each 10 second window starting at 0 again.
*
* Performance-wise this class is optimized for writes, not reads. This is done because it expects far higher write volume (thousands/second) than reads (a few per second).
*
* For example, on each read to getSum/getCount it will iterate buckets to sum the data so that on writes we don't need to maintain the overall sum and pay the synchronization cost at each write to
* ensure the sum is up-to-date when the read can easily iterate each bucket to get the sum when it needs it.
*
* See UnitTest for usage and expected behavior examples.
*
* @ThreadSafe
*/
public class HystrixRollingNumber {
private static final Time ACTUAL_TIME = new ActualTime();
private final Time time;
final int timeInMilliseconds;
final int numberOfBuckets;
final int bucketSizeInMillseconds;
final BucketCircularArray buckets;
private final CumulativeSum cumulativeSum = new CumulativeSum();
/**
* Construct a counter, with configurable properties for how many buckets, and how long of an interval to track
* @param timeInMilliseconds length of time to report metrics over
* @param numberOfBuckets number of buckets to use
*
* @deprecated Please use {@link HystrixRollingNumber(int, int) instead}. These values are no longer allowed to
* be updated at runtime.
*/
@Deprecated
public HystrixRollingNumber(HystrixProperty timeInMilliseconds, HystrixProperty numberOfBuckets) {
this(timeInMilliseconds.get(), numberOfBuckets.get());
}
public HystrixRollingNumber(int timeInMilliseconds, int numberOfBuckets) {
this(ACTUAL_TIME, timeInMilliseconds, numberOfBuckets);
}
/* package for testing */ HystrixRollingNumber(Time time, int timeInMilliseconds, int numberOfBuckets) {
this.time = time;
this.timeInMilliseconds = timeInMilliseconds;
this.numberOfBuckets = numberOfBuckets;
if (timeInMilliseconds % numberOfBuckets != 0) {
throw new IllegalArgumentException("The timeInMilliseconds must divide equally into numberOfBuckets. For example 1000/10 is ok, 1000/11 is not.");
}
this.bucketSizeInMillseconds = timeInMilliseconds / numberOfBuckets;
buckets = new BucketCircularArray(numberOfBuckets);
}
/**
* Increment the counter in the current bucket by one for the given {@link HystrixRollingNumberEvent} type.
*
* The {@link HystrixRollingNumberEvent} must be a "counter" type HystrixRollingNumberEvent.isCounter() == true.
*
* @param type
* HystrixRollingNumberEvent defining which counter to increment
*/
public void increment(HystrixRollingNumberEvent type) {
getCurrentBucket().getAdder(type).increment();
}
/**
* Add to the counter in the current bucket for the given {@link HystrixRollingNumberEvent} type.
*
* The {@link HystrixRollingNumberEvent} must be a "counter" type HystrixRollingNumberEvent.isCounter() == true.
*
* @param type
* HystrixRollingNumberEvent defining which counter to add to
* @param value
* long value to be added to the current bucket
*/
public void add(HystrixRollingNumberEvent type, long value) {
getCurrentBucket().getAdder(type).add(value);
}
/**
* Update a value and retain the max value.
*
* The {@link HystrixRollingNumberEvent} must be a "max updater" type HystrixRollingNumberEvent.isMaxUpdater() == true.
*
* @param type HystrixRollingNumberEvent defining which counter to retrieve values from
* @param value long value to be given to the max updater
*/
public void updateRollingMax(HystrixRollingNumberEvent type, long value) {
getCurrentBucket().getMaxUpdater(type).update(value);
}
/**
* Force a reset of all rolling counters (clear all buckets) so that statistics start being gathered from scratch.
*
* This does NOT reset the CumulativeSum values.
*/
public void reset() {
// if we are resetting, that means the lastBucket won't have a chance to be captured in CumulativeSum, so let's do it here
Bucket lastBucket = buckets.peekLast();
if (lastBucket != null) {
cumulativeSum.addBucket(lastBucket);
}
// clear buckets so we start over again
buckets.clear();
}
/**
* Get the cumulative sum of all buckets ever since the JVM started without rolling for the given {@link HystrixRollingNumberEvent} type.
*
* See {@link #getRollingSum(HystrixRollingNumberEvent)} for the rolling sum.
*
* The {@link HystrixRollingNumberEvent} must be a "counter" type HystrixRollingNumberEvent.isCounter() == true.
*
* @param type HystrixRollingNumberEvent defining which counter to retrieve values from
* @return cumulative sum of all increments and adds for the given {@link HystrixRollingNumberEvent} counter type
*/
public long getCumulativeSum(HystrixRollingNumberEvent type) {
// this isn't 100% atomic since multiple threads can be affecting latestBucket & cumulativeSum independently
// but that's okay since the count is always a moving target and we're accepting a "point in time" best attempt
// we are however putting 'getValueOfLatestBucket' first since it can have side-affects on cumulativeSum whereas the inverse is not true
return getValueOfLatestBucket(type) + cumulativeSum.get(type);
}
/**
* Get the sum of all buckets in the rolling counter for the given {@link HystrixRollingNumberEvent} type.
*
* The {@link HystrixRollingNumberEvent} must be a "counter" type HystrixRollingNumberEvent.isCounter() == true.
*
* @param type
* HystrixRollingNumberEvent defining which counter to retrieve values from
* @return
* value from the given {@link HystrixRollingNumberEvent} counter type
*/
public long getRollingSum(HystrixRollingNumberEvent type) {
Bucket lastBucket = getCurrentBucket();
if (lastBucket == null)
return 0;
long sum = 0;
for (Bucket b : buckets) {
sum += b.getAdder(type).sum();
}
return sum;
}
/**
* Get the value of the latest (current) bucket in the rolling counter for the given {@link HystrixRollingNumberEvent} type.
*
* The {@link HystrixRollingNumberEvent} must be a "counter" type HystrixRollingNumberEvent.isCounter() == true.
*
* @param type
* HystrixRollingNumberEvent defining which counter to retrieve value from
* @return
* value from latest bucket for given {@link HystrixRollingNumberEvent} counter type
*/
public long getValueOfLatestBucket(HystrixRollingNumberEvent type) {
Bucket lastBucket = getCurrentBucket();
if (lastBucket == null)
return 0;
// we have bucket data so we'll return the lastBucket
return lastBucket.get(type);
}
/**
* Get an array of values for all buckets in the rolling counter for the given {@link HystrixRollingNumberEvent} type.
*
* Index 0 is the oldest bucket.
*
* The {@link HystrixRollingNumberEvent} must be a "counter" type HystrixRollingNumberEvent.isCounter() == true.
*
* @param type
* HystrixRollingNumberEvent defining which counter to retrieve values from
* @return array of values from each of the rolling buckets for given {@link HystrixRollingNumberEvent} counter type
*/
public long[] getValues(HystrixRollingNumberEvent type) {
Bucket lastBucket = getCurrentBucket();
if (lastBucket == null)
return new long[0];
// get buckets as an array (which is a copy of the current state at this point in time)
Bucket[] bucketArray = buckets.getArray();
// we have bucket data so we'll return an array of values for all buckets
long values[] = new long[bucketArray.length];
int i = 0;
for (Bucket bucket : bucketArray) {
if (type.isCounter()) {
values[i++] = bucket.getAdder(type).sum();
} else if (type.isMaxUpdater()) {
values[i++] = bucket.getMaxUpdater(type).max();
}
}
return values;
}
/**
* Get the max value of values in all buckets for the given {@link HystrixRollingNumberEvent} type.
*
* The {@link HystrixRollingNumberEvent} must be a "max updater" type HystrixRollingNumberEvent.isMaxUpdater() == true.
*
* @param type
* HystrixRollingNumberEvent defining which "max updater" to retrieve values from
* @return max value for given {@link HystrixRollingNumberEvent} type during rolling window
*/
public long getRollingMaxValue(HystrixRollingNumberEvent type) {
long values[] = getValues(type);
if (values.length == 0) {
return 0;
} else {
Arrays.sort(values);
return values[values.length - 1];
}
}
private ReentrantLock newBucketLock = new ReentrantLock();
/* package for testing */Bucket getCurrentBucket() {
long currentTime = time.getCurrentTimeInMillis();
/* a shortcut to try and get the most common result of immediately finding the current bucket */
/**
* Retrieve the latest bucket if the given time is BEFORE the end of the bucket window, otherwise it returns NULL.
*
* NOTE: This is thread-safe because it's accessing 'buckets' which is a LinkedBlockingDeque
*/
Bucket currentBucket = buckets.peekLast();
if (currentBucket != null && currentTime < currentBucket.windowStart + this.bucketSizeInMillseconds) {
// if we're within the bucket 'window of time' return the current one
// NOTE: We do not worry if we are BEFORE the window in a weird case of where thread scheduling causes that to occur,
// we'll just use the latest as long as we're not AFTER the window
return currentBucket;
}
/* if we didn't find the current bucket above, then we have to create one */
/**
* The following needs to be synchronized/locked even with a synchronized/thread-safe data structure such as LinkedBlockingDeque because
* the logic involves multiple steps to check existence, create an object then insert the object. The 'check' or 'insertion' themselves
* are thread-safe by themselves but not the aggregate algorithm, thus we put this entire block of logic inside synchronized.
*
* I am using a tryLock if/then (http://download.oracle.com/javase/6/docs/api/java/util/concurrent/locks/Lock.html#tryLock())
* so that a single thread will get the lock and as soon as one thread gets the lock all others will go the 'else' block
* and just return the currentBucket until the newBucket is created. This should allow the throughput to be far higher
* and only slow down 1 thread instead of blocking all of them in each cycle of creating a new bucket based on some testing
* (and it makes sense that it should as well).
*
* This means the timing won't be exact to the millisecond as to what data ends up in a bucket, but that's acceptable.
* It's not critical to have exact precision to the millisecond, as long as it's rolling, if we can instead reduce the impact synchronization.
*
* More importantly though it means that the 'if' block within the lock needs to be careful about what it changes that can still
* be accessed concurrently in the 'else' block since we're not completely synchronizing access.
*
* For example, we can't have a multi-step process to add a bucket, remove a bucket, then update the sum since the 'else' block of code
* can retrieve the sum while this is all happening. The trade-off is that we don't maintain the rolling sum and let readers just iterate
* bucket to calculate the sum themselves. This is an example of favoring write-performance instead of read-performance and how the tryLock
* versus a synchronized block needs to be accommodated.
*/
if (newBucketLock.tryLock()) {
try {
if (buckets.peekLast() == null) {
// the list is empty so create the first bucket
Bucket newBucket = new Bucket(currentTime);
buckets.addLast(newBucket);
return newBucket;
} else {
// We go into a loop so that it will create as many buckets as needed to catch up to the current time
// as we want the buckets complete even if we don't have transactions during a period of time.
for (int i = 0; i < numberOfBuckets; i++) {
// we have at least 1 bucket so retrieve it
Bucket lastBucket = buckets.peekLast();
if (currentTime < lastBucket.windowStart + this.bucketSizeInMillseconds) {
// if we're within the bucket 'window of time' return the current one
// NOTE: We do not worry if we are BEFORE the window in a weird case of where thread scheduling causes that to occur,
// we'll just use the latest as long as we're not AFTER the window
return lastBucket;
} else if (currentTime - (lastBucket.windowStart + this.bucketSizeInMillseconds) > timeInMilliseconds) {
// the time passed is greater than the entire rolling counter so we want to clear it all and start from scratch
reset();
// recursively call getCurrentBucket which will create a new bucket and return it
return getCurrentBucket();
} else { // we're past the window so we need to create a new bucket
// create a new bucket and add it as the new 'last'
buckets.addLast(new Bucket(lastBucket.windowStart + this.bucketSizeInMillseconds));
// add the lastBucket values to the cumulativeSum
cumulativeSum.addBucket(lastBucket);
}
}
// we have finished the for-loop and created all of the buckets, so return the lastBucket now
return buckets.peekLast();
}
} finally {
newBucketLock.unlock();
}
} else {
currentBucket = buckets.peekLast();
if (currentBucket != null) {
// we didn't get the lock so just return the latest bucket while another thread creates the next one
return currentBucket;
} else {
// the rare scenario where multiple threads raced to create the very first bucket
// wait slightly and then use recursion while the other thread finishes creating a bucket
try {
Thread.sleep(5);
} catch (Exception e) {
// ignore
}
return getCurrentBucket();
}
}
}
/* package */static interface Time {
public long getCurrentTimeInMillis();
}
private static class ActualTime implements Time {
@Override
public long getCurrentTimeInMillis() {
return System.currentTimeMillis();
}
}
/**
* Counters for a given 'bucket' of time.
*/
/* package */static class Bucket {
final long windowStart;
final LongAdder[] adderForCounterType;
final LongMaxUpdater[] updaterForCounterType;
Bucket(long startTime) {
this.windowStart = startTime;
/*
* We support both LongAdder and LongMaxUpdater in a bucket but don't want the memory allocation
* of all types for each so we only allocate the objects if the HystrixRollingNumberEvent matches
* the correct type - though we still have the allocation of empty arrays to the given length
* as we want to keep using the type.ordinal() value for fast random access.
*/
// initialize the array of LongAdders
adderForCounterType = new LongAdder[HystrixRollingNumberEvent.values().length];
for (HystrixRollingNumberEvent type : HystrixRollingNumberEvent.values()) {
if (type.isCounter()) {
adderForCounterType[type.ordinal()] = new LongAdder();
}
}
updaterForCounterType = new LongMaxUpdater[HystrixRollingNumberEvent.values().length];
for (HystrixRollingNumberEvent type : HystrixRollingNumberEvent.values()) {
if (type.isMaxUpdater()) {
updaterForCounterType[type.ordinal()] = new LongMaxUpdater();
// initialize to 0 otherwise it is Long.MIN_VALUE
updaterForCounterType[type.ordinal()].update(0);
}
}
}
long get(HystrixRollingNumberEvent type) {
if (type.isCounter()) {
return adderForCounterType[type.ordinal()].sum();
}
if (type.isMaxUpdater()) {
return updaterForCounterType[type.ordinal()].max();
}
throw new IllegalStateException("Unknown type of event: " + type.name());
}
LongAdder getAdder(HystrixRollingNumberEvent type) {
if (!type.isCounter()) {
throw new IllegalStateException("Type is not a Counter: " + type.name());
}
return adderForCounterType[type.ordinal()];
}
LongMaxUpdater getMaxUpdater(HystrixRollingNumberEvent type) {
if (!type.isMaxUpdater()) {
throw new IllegalStateException("Type is not a MaxUpdater: " + type.name());
}
return updaterForCounterType[type.ordinal()];
}
}
/**
* Cumulative counters (from start of JVM) from each Type
*/
/* package */static class CumulativeSum {
final LongAdder[] adderForCounterType;
final LongMaxUpdater[] updaterForCounterType;
CumulativeSum() {
/*
* We support both LongAdder and LongMaxUpdater in a bucket but don't want the memory allocation
* of all types for each so we only allocate the objects if the HystrixRollingNumberEvent matches
* the correct type - though we still have the allocation of empty arrays to the given length
* as we want to keep using the type.ordinal() value for fast random access.
*/
// initialize the array of LongAdders
adderForCounterType = new LongAdder[HystrixRollingNumberEvent.values().length];
for (HystrixRollingNumberEvent type : HystrixRollingNumberEvent.values()) {
if (type.isCounter()) {
adderForCounterType[type.ordinal()] = new LongAdder();
}
}
updaterForCounterType = new LongMaxUpdater[HystrixRollingNumberEvent.values().length];
for (HystrixRollingNumberEvent type : HystrixRollingNumberEvent.values()) {
if (type.isMaxUpdater()) {
updaterForCounterType[type.ordinal()] = new LongMaxUpdater();
// initialize to 0 otherwise it is Long.MIN_VALUE
updaterForCounterType[type.ordinal()].update(0);
}
}
}
public void addBucket(Bucket lastBucket) {
for (HystrixRollingNumberEvent type : HystrixRollingNumberEvent.values()) {
if (type.isCounter()) {
getAdder(type).add(lastBucket.getAdder(type).sum());
}
if (type.isMaxUpdater()) {
getMaxUpdater(type).update(lastBucket.getMaxUpdater(type).max());
}
}
}
long get(HystrixRollingNumberEvent type) {
if (type.isCounter()) {
return adderForCounterType[type.ordinal()].sum();
}
if (type.isMaxUpdater()) {
return updaterForCounterType[type.ordinal()].max();
}
throw new IllegalStateException("Unknown type of event: " + type.name());
}
LongAdder getAdder(HystrixRollingNumberEvent type) {
if (!type.isCounter()) {
throw new IllegalStateException("Type is not a Counter: " + type.name());
}
return adderForCounterType[type.ordinal()];
}
LongMaxUpdater getMaxUpdater(HystrixRollingNumberEvent type) {
if (!type.isMaxUpdater()) {
throw new IllegalStateException("Type is not a MaxUpdater: " + type.name());
}
return updaterForCounterType[type.ordinal()];
}
}
/**
* This is a circular array acting as a FIFO queue.
*
* It purposefully does NOT implement Deque or some other Collection interface as it only implements functionality necessary for this RollingNumber use case.
*
* Important Thread-Safety Note: This is ONLY thread-safe within the context of RollingNumber and the protection it gives in the getCurrentBucket method. It uses AtomicReference
* objects to ensure anything done outside of getCurrentBucket is thread-safe, and to ensure visibility of changes across threads (ie. volatility) but the addLast and removeFirst
* methods are NOT thread-safe for external access they depend upon the lock.tryLock() protection in getCurrentBucket which ensures only a single thread will access them at at time.
*
* benjchristensen => This implementation was chosen based on performance testing I did and documented at: http://benjchristensen.com/2011/10/08/atomiccirculararray/
*/
/* package */static class BucketCircularArray implements Iterable {
private final AtomicReference state;
private final int dataLength; // we don't resize, we always stay the same, so remember this
private final int numBuckets;
/**
* Immutable object that is atomically set every time the state of the BucketCircularArray changes
*
* This handles the compound operations
*/
private class ListState {
/*
* this is an AtomicReferenceArray and not a normal Array because we're copying the reference
* between ListState objects and multiple threads could maintain references across these
* compound operations so I want the visibility/concurrency guarantees
*/
private final AtomicReferenceArray data;
private final int size;
private final int tail;
private final int head;
private ListState(AtomicReferenceArray data, int head, int tail) {
this.head = head;
this.tail = tail;
if (head == 0 && tail == 0) {
size = 0;
} else {
this.size = (tail + dataLength - head) % dataLength;
}
this.data = data;
}
public Bucket tail() {
if (size == 0) {
return null;
} else {
// we want to get the last item, so size()-1
return data.get(convert(size - 1));
}
}
private Bucket[] getArray() {
/*
* this isn't technically thread-safe since it requires multiple reads on something that can change
* but since we never clear the data directly, only increment/decrement head/tail we would never get a NULL
* just potentially return stale data which we are okay with doing
*/
ArrayList array = new ArrayList();
for (int i = 0; i < size; i++) {
array.add(data.get(convert(i)));
}
return array.toArray(new Bucket[array.size()]);
}
private ListState incrementTail() {
/* if incrementing results in growing larger than 'length' which is the max we should be at, then also increment head (equivalent of removeFirst but done atomically) */
if (size == numBuckets) {
// increment tail and head
return new ListState(data, (head + 1) % dataLength, (tail + 1) % dataLength);
} else {
// increment only tail
return new ListState(data, head, (tail + 1) % dataLength);
}
}
public ListState clear() {
return new ListState(new AtomicReferenceArray(dataLength), 0, 0);
}
public ListState addBucket(Bucket b) {
/*
* We could in theory have 2 threads addBucket concurrently and this compound operation would interleave.
*
* This should NOT happen since getCurrentBucket is supposed to be executed by a single thread.
*
* If it does happen, it's not a huge deal as incrementTail() will be protected by compareAndSet and one of the two addBucket calls will succeed with one of the Buckets.
*
* In either case, a single Bucket will be returned as "last" and data loss should not occur and everything keeps in sync for head/tail.
*
* Also, it's fine to set it before incrementTail because nothing else should be referencing that index position until incrementTail occurs.
*/
data.set(tail, b);
return incrementTail();
}
// The convert() method takes a logical index (as if head was
// always 0) and calculates the index within elementData
private int convert(int index) {
return (index + head) % dataLength;
}
}
BucketCircularArray(int size) {
AtomicReferenceArray _buckets = new AtomicReferenceArray(size + 1); // + 1 as extra room for the add/remove;
state = new AtomicReference(new ListState(_buckets, 0, 0));
dataLength = _buckets.length();
numBuckets = size;
}
public void clear() {
while (true) {
/*
* it should be very hard to not succeed the first pass thru since this is typically is only called from
* a single thread protected by a tryLock, but there is at least 1 other place (at time of writing this comment)
* where reset can be called from (CircuitBreaker.markSuccess after circuit was tripped) so it can
* in an edge-case conflict.
*
* Instead of trying to determine if someone already successfully called clear() and we should skip
* we will have both calls reset the circuit, even if that means losing data added in between the two
* depending on thread scheduling.
*
* The rare scenario in which that would occur, we'll accept the possible data loss while clearing it
* since the code has stated its desire to clear() anyways.
*/
ListState current = state.get();
ListState newState = current.clear();
if (state.compareAndSet(current, newState)) {
return;
}
}
}
/**
* Returns an iterator on a copy of the internal array so that the iterator won't fail by buckets being added/removed concurrently.
*/
public Iterator iterator() {
return Collections.unmodifiableList(Arrays.asList(getArray())).iterator();
}
public void addLast(Bucket o) {
ListState currentState = state.get();
// create new version of state (what we want it to become)
ListState newState = currentState.addBucket(o);
/*
* use compareAndSet to set in case multiple threads are attempting (which shouldn't be the case because since addLast will ONLY be called by a single thread at a time due to protection
* provided in getCurrentBucket)
*/
if (state.compareAndSet(currentState, newState)) {
// we succeeded
return;
} else {
// we failed, someone else was adding or removing
// instead of trying again and risking multiple addLast concurrently (which shouldn't be the case)
// we'll just return and let the other thread 'win' and if the timing is off the next call to getCurrentBucket will fix things
return;
}
}
public Bucket getLast() {
return peekLast();
}
public int size() {
// the size can also be worked out each time as:
// return (tail + data.length() - head) % data.length();
return state.get().size;
}
public Bucket peekLast() {
return state.get().tail();
}
private Bucket[] getArray() {
return state.get().getArray();
}
}
}