com.tangosol.net.ClusterDependencies Maven / Gradle / Ivy
Show all versions of coherence Show documentation
/*
* Copyright (c) 2000, 2023, Oracle and/or its affiliates.
*
* Licensed under the Universal Permissive License v 1.0 as shown at
* https://oss.oracle.com/licenses/upl.
*/
package com.tangosol.net;
import com.tangosol.coherence.config.builder.ActionPolicyBuilder;
import com.tangosol.coherence.config.builder.ParameterizedBuilderRegistry;
import com.tangosol.coherence.config.builder.ServiceFailurePolicyBuilder;
import com.tangosol.coherence.config.builder.SocketProviderBuilder;
import com.tangosol.io.SerializerFactory;
import com.tangosol.io.WrapperStreamFactory;
import com.tangosol.persistence.SnapshotArchiverFactory;
import com.tangosol.run.xml.XmlElement;
import com.tangosol.util.Filter;
import com.oracle.coherence.common.base.Disposable;
import com.tangosol.util.ResourceRegistry;
import java.net.InetAddress;
import java.net.SocketOptions;
import java.util.List;
import java.util.Map;
/**
* The ClusterDependencies interface defines externally provided dependencies
* for a {@link Cluster}.
*
* @author pfm 2011.05.10
* @since Coherence 12.1.3
*/
public interface ClusterDependencies
{
/**
* Obtain the filter that is used by the cluster to determine whether to
* accept a new Cluster member. The {@link Filter#evaluate} method
* will be passed the java.net.InetAddress of the potential member.
* Implementations should return "true" to allow the new member to join the
* cluster.
*
* @return the authorized host filter
*/
public Filter getAuthorizedHostFilter();
/**
* Obtain the action policy builder used by the cluster to control cluster
* membership actions.
*
* @return the cluster action policy builder
*/
public ActionPolicyBuilder getClusterActionPolicyBuilder();
/**
* Obtain the maximum amount of time that the cluster service will announce
* itself without receiving a response before deciding that a cluster does
* not exist and a new cluster should be formed.
*
* @return the cluster announce timeout milliseconds
*/
public int getClusterAnnounceTimeoutMillis();
/**
* Obtain the amount of time between heartbeat messages.
*
* @return the cluster heartbeat delay
*/
public int getClusterHeartbeatDelayMillis();
/**
* Obtain the maximum variance between sending and receiving broadcast messages
* when trying to determine the difference between a new cluster Member's
* wall time and the cluster time.
*
* The smaller the variance, the more certain one can be that the cluster
* time will be closer between multiple systems running in the cluster;
* however, the process of joining the cluster will be extended until an
* exchange of Messages can occur within the specified variance.
*
* Normally, a value as small as 20 milliseconds is sufficient, but with
* heavily loaded clusters and multiple network hops it is possible that a
* larger value would be necessary.
*
* @return the cluster timestamp maximum variance
*/
public int getClusterTimestampMaxVarianceMillis();
/**
* Obtain the Coherence product edition.
*
* The valid value are:
*
* - 0=Data Client (DC)
*
- 1=Real-Time Client (RTC)
*
- 2=Standard Edition (SE)
*
- 3=Community Edition (CE)
*
- 4=Enterprise Edition (EE)
*
- 5=Grid Edition (GE)
*
* @return the edition
*/
public int getEdition();
/**
* Obtain the list of all filters for the cluster.
*
* @return the filters list
*/
public List getFilterList();
/**
* Obtain a map of service name to filter list. Each map entry has the list
* of filters that will be used by the service.
*
* @return the service filter map
*/
public Map> getServiceFilterMap();
/**
* Obtain the map of filter name to WrapperStreamFactory.
*
* @return the filter map
*/
public Map getFilterMap();
/**
* Return the InetAddress on which this member will listen for discovery requests.
*
* @return the local discovery address.
*/
public InetAddress getLocalDiscoveryAddress();
/**
* Obtain the multicast group address to listen/publish on.
*
* @return the multicast group address, or null if WKA is enabled
*/
public InetAddress getGroupAddress();
/**
* Obtain the preferred size for the multicast datagram socket input buffer
* (SO_RCVBUF).
*
* A negative value indicates that this value specifies the number of packets,
* rather than number of bytes for the buffer.
*
* @return the group buffer size
*/
public int getGroupBufferSize();
/**
* Obtain the IP address of the interface (e.g. the NIC) that the MulticastSocket
* will open a socket on.
*
* @return the group interface
*/
public InetAddress getGroupInterface();
/**
* Obtain the priority of the PacketListener daemon thread.
*
* @return the group listener priority
*/
public int getGroupListenerPriority();
/**
* Obtain the multicast port number that the cluster will listen/publish on.
*
* @return the group port
*/
public int getGroupPort();
/**
* Obtain the multicast time-to-live setting for the cluster.
*
* The TTL sets the IP time-to-live for DatagramPackets sent to a
* MulticastGroup, which specifies how many "hops" that the packet will be
* forwarded on the network before it expires. The ttl must be in the range
* 0 <= ttl <= 255.
*
* @return the TTL value
*/
public int getGroupTimeToLive();
/**
* Obtain the default Guard timeout.
*
* @return the Guard Timeout
*/
public long getGuardTimeoutMillis();
/**
* Obtain the number of connection attempts that the IpMonitor will use in
* determining if IP connectivity exists to other hosts.
*
* @return number of IP monitor attempts
*/
public int getIpMonitorAttempts();
/**
* Obtain the priority of the IpMonitor daemon thread.
*
* @return IP monitor priority
*/
public int getIpMonitorPriority();
/**
* Obtain the timeout that the IpMonitor will use in determining if IP
* connectivity exists to other hosts.
*
* @return the IP monitor timeout
*/
public long getIpMonitorTimeoutMillis();
/**
* Obtain the preferred size for the unicast socket input buffer (SO_RCVBUF).
*
* A negative value indicates that this value specifies the number of packets,
* rather then number bytes for the buffer.
*
* @return the local buffer size
*/
public int getLocalBufferSize();
/**
* Obtain the priority of the "local" PacketListener daemon thread.
*
* @return the local listener priority
*/
public int getLocalListenerPriority();
/**
* Obtain the unicast IP address that the cluster member will listen/publish on
* or null for default.
*
* @return the local address, or null
*/
public InetAddress getLocalAddress();
/**
* Obtain the unicast port number that the member will listen on.
*
* @return the local port
*/
public int getLocalPort();
/**
* Obtain the number of sequential packets which may be lost before declaring a
* member paused, and starting to trickle packets.
*
* @return the lost packet threshold
*/
public int getLostPacketThreshold();
/**
* Obtain the member identity.
*
* @return the member identity
*/
public MemberIdentity getMemberIdentity();
/**
* Obtain the Mode for the "license type", i.e. evaluation, development or
* production use.
*
* The valid values are:
*
* - {@link #LICENSE_MODE_EVALUATION}
*
- {@link #LICENSE_MODE_DEVELOPMENT}
*
- {@link #LICENSE_MODE_PRODUCTION}
*
*
* @return the license mode
*/
public int getMode();
/**
* Obtain the maximum allowable flow-control rate measured in packets.
*
* @return the maximum number of outstanding packets
*/
public int getOutstandingPacketMaximum();
/**
* Obtain the minimum allowable flow-control rate measured in packets.
*
* @return the minimum number of outstanding packets
*/
public int getOutstandingPacketMinimum();
/**
* Obtain the aggression factor to use in deferring a packet once it has
* reached the average bundle size.
*
* @return the packet bundling aggression
*/
public double getPacketBundlingAggression();
/**
* Obtain the maximum amount of time to defer a packet while waiting for
* additional packets to bundle.
*
* @return the packet bundling threshold
*/
public long getPacketBundlingThresholdNanos();
/**
* Obtain the maximum size, in bytes, of the network packets that
* will be sent and received on the local and group sockets. This value
* should be greater or equal to 256.
*
* @return the maximum packet length
*/
public int getPacketMaxLength();
/**
* Obtain the preferred size, in bytes, of the network packets
* that will be sent and received on the local sockets.
*
* This value should be greater or equal to 256. If set to zero the value
* will be automatically computed based upon the MTU of the network interface
* associated with {@link #getLocalAddress the local address}.
*
* @return the preferred packet length
*/
public int getPacketPreferredLength();
/**
* Obtain the amount of time that the Publisher may delay sending an ACK packet.
*
* @return the publisher ACK delay
*/
public int getPublisherAckDelayMillis();
/**
* Obtain the preferred size of the unicast socket output buffer (SO_SNDBUF).
*
* A negative value indicates that this value specifies the number of packets,
* rather than the number bytes for the buffer. A value of zero results in a
* value being automatically calculated.
*
* @return the publisher buffer size
*/
public int getPublisherSocketBufferSize();
/**
* Obtain the maximum number of packets in the send and re-send queues that the
* Publisher will tolerate before determining that it is clogged and must
* slow down client requests (requests from local non-system threads). Zero
* means no limit. This property prevents most unexpected out-of-memory
* conditions by limiting the size of the re-send queue.
*
* @return the publisher clogged count
*/
public int getPublisherCloggedCount();
/**
* Obtain the amount of time that the Publisher will pause a client thread that
* is trying to send a message when the Publisher is clogged. The Publisher
* will not allow the message to go through until the clog is resolved, and will
* repeatedly pause the thread for the duration specified by this value.
*
* @return the publisher clogged delay
*/
public int getPublisherCloggedDelayMillis();
/**
* Obtain the group threshold which is used to determine whether a packet
* will be sent via unicast or multicast.
*
* This is a percentage value and is in the range of 1% to 100%.
* In a cluster of "n" nodes, a particular node sending a packet
* to a set of others (not counting self) destination nodes of size "d"
* (in the range of 0 to n-1), the packet will be sent multicast if and only
* if the following holds true:
*
* - The packet is being sent over the network to more than one other node:
* (d > 1);
*
- The number of nodes is greater than the threshold: (d > (n-1) *
* (threshold/100))
*
* Setting this value to 1 will allow the publisher to switch to
* multicast for basically all multi-point traffic. Setting it to 100 will
* force the publisher to use unicast for all multi-point traffic
* except for explicit broadcast messages (e.g. cluster heartbeat and
* discovery.)
*
* Note: that a values less then 100 will also prevent this cluster from
* sharing its cluster port with other clusters running on the same machine.
*
* @return the publisher group threshold
*/
public int getPublisherGroupThreshold();
/**
* Obtain the amount of time that the Publisher will delay sending a NACK
* packet.
*
* @return the publisher NACK delay
*/
public int getPublisherNackDelayMillis();
/**
* Obtain the priority of the PacketPublisher daemon thread.
*
* @return the publisher priority
*/
public int getPublisherPriority();
/**
* Obtain the minimum amount of time before a packet is resent across the
* network if it has not been acknowledged.
*
* This value is also used for other situations in which packets need to be
* resent, such as cluster announcements.
*
* @return the publisher resend delay
*/
public int getPublisherResendDelayMillis();
/**
* Obtain the maximum amount of time that the publisher will be resending a
* packet before the packet recipient is considered departed.
*
* @return the publisher resend timeout
*/
public int getPublisherResendTimeoutMillis();
/**
* Obtain the priority of the PacketReceiver daemon thread.
*
* @return the receiver priority
*/
public int getReceiverPriority();
/**
* Obtain the name of the default reliable transport used by this node.
*
* @return the default reliable transport name
*/
public String getReliableTransport();
/**
* Obtain the service failure policy builder.
*
* @return the service failure policy builder
*/
public ServiceFailurePolicyBuilder getServiceFailurePolicyBuilder();
/**
* Obtain the value of the ShutdownHook setting.
*
* The valid values are the SHUTDOWN_* constants.
*
* @return the value of the ShutdownHook setting
*/
public int getShutdownHookOption();
/**
* Obtain the SocketProviderFactory associated with the cluster.
*
* @return the socket provider factory
*/
public SocketProviderFactory getSocketProviderFactory();
/**
* Obtain the service map.
*
* @return the map of service class information indexed by service name
*/
public Map getServiceMap();
/**
* Obtain the Serializer map.
*
* @return the Serializer map
*/
public Map getSerializerMap();
/**
* Obtain the snapshot archiver map.
*
* @return the snapshot archiver map
*/
public Map getSnapshotArchiverMap();
/**
* Obtain the address provider map.
*
* @return the address provider map
*/
public Map getAddressProviderMap();
/**
* The registry for all builders associated with the cluster.
* A builder can be looked up via the class it produces and a name for the
* builder using {@link ParameterizedBuilderRegistry#getBuilder(Class, String)} or
* just by the class it builds if there are no named builders.
*
* Currently, only {@link SerializerFactory}, {@link
* com.tangosol.coherence.config.builder.ParameterizedBuilder ParameterizedBuilder}<
* {@link com.oracle.coherence.persistence.PersistenceEnvironment PersistenceEnvironment}>
* and {@link
* com.tangosol.coherence.config.builder.ParameterizedBuilder ParameterizedBuilder}<
* {@link com.tangosol.net.security.StorageAccessAuthorizer StorageAccessAuthorizer}>
* are registered by the implementation.
*
* All registered Builders implementing {@link Disposable} will
* be disposed.
*
* @return the {@link ParameterizedBuilderRegistry}
*/
public ParameterizedBuilderRegistry getBuilderRegistry();
/**
* Obtain the cluster's UnicastSocketProvider XML configuration.
*
* @return the unicast socket provider xml
*/
@Deprecated
public XmlElement getUnicastSocketProviderXml();
/**
* Obtain the cluster's unicast {@link SocketProviderBuilder}.
*
* @return unicast SocketProviderBuilder
*
* @since Coherence 12.2.1.1
*/
public SocketProviderBuilder getUnicastSocketProviderBuilder();
/**
* Obtain the priority of the PacketSpeaker daemon thread.
*
* @return the PacketSpeaker priority
*/
public int getSpeakerPriority();
/**
* Obtain the minimum number of packets which must be ready to be sent in order for
* the speaker to be utilized. If the number of packets is less then this
* setting then the publisher will send the packets itself. A value of 0
* will cause all packets to be handled by the speaker, a high value
* (Integer.MAX_VALUE) will cause all packets to be sent by the publisher.
*
* If this value is negative, the actual value will be based on the socket's
* send buffer size.
*
* @return the PacketSpeaker minimum volume
*/
public int getSpeakerVolumeMinimum();
/**
* Determine whether the packet speaker is enabled.
*
* @return true if the speaker is enabled
*/
public boolean isSpeakerEnabled();
/**
* Obtain the listener backlog for TCMP's TCP listener.
*
* @return the TCP listener backlog
*/
public int getTcpBacklog();
/**
* Obtain the SocketOptions to apply when TCMP runs on a TcpDatagramSocket.
*
* @return the TCMP datagram socket options
*/
public SocketOptions getTcpDatagramSocketOptions();
/**
* Obtain the TcpRing SocketOptions.
*
* @return the TcpRing socket options
*/
public SocketOptions getTcpRingSocketOptions();
/**
* Obtain the AddressProvider that provides the well known addresses (WKA)
* represented by InetSocketAddress objects.
*
* @return the well known addresses, or null for multicast
*/
public AddressProvider getWellKnownAddresses();
/**
* Determine whether the TCMP flow control is enabled.
*
* @return true if TCMP flow control is enabled
*/
public boolean isFlowControlEnabled();
/**
* Determine whether the IpMonitor is enabled.
*
* @return true if IpMonitor is enabled
*/
public boolean isIpMonitorEnabled();
/**
* Determine whether the unicast listener local port(s) will be automatically
* selected if the specified port cannot be bound to (e.g. it is already in use.)
*
* @return true if unicast listener local port is automatically selected
*/
public boolean isLocalPortAutoAdjust();
/**
* Return the maximum unicast port that can be auto-adjusted to.
*
* @return the maximum unicast port that can be auto-adjusted to
*/
public int getLocalPortAutoAdjust();
/**
* Determine whether the PacketReceiver will use negative acknowledgments
* (NACK packet requests) to pro-actively respond to known missing packets.
*
* @return true if NACK is enabled
*/
public boolean isReceiverNackEnabled();
/**
* Determine whether the TCMP is enabled.
*
* @return true if TCMP is enabled
*/
public boolean isTcmpEnabled();
/**
* Determine whether the TcpRing is enabled.
*
* @return true if TcpRing is enabled
*/
public boolean isTcpRingEnabled();
/**
* Register all the custom resources contained in this {@link com.tangosol.internal.net.cluster.ClusterDependencies}
* with the target registry.
*
* @param registry the target {@link ResourceRegistry} to register resources with
*/
public void registerResources(ResourceRegistry registry);
/**
* Register a {@link ServiceProvider}.
*
* @param sType the type of the service provided
* @param provider the {@link ServiceProvider} instance
*/
public void addLocalServiceProvider(String sType, ServiceProvider provider);
/**
* Obtain a {@link ServiceProvider} that can build an instance
* of a given service type.
*
* @param sType the service type
*
* @return a {@link ServiceProvider} that can build an instance
* of a given service type
*/
public ServiceProvider getLocalServiceProvider(String sType);
/**
* Obtain the lambdas serialization mode, i.e. static, dynamic or
* empty string, if not set.
*
* @return the lambdas serialization mode or empty string if not set.
*
* @since 23.09
*/
public String getLambdasSerializationMode();
/**
* Determine whether the secured-production mode is enabled.
*
* @return true if secured-production mode is enabled
*
* @since 23.09
*/
public boolean isSecuredProduction();
// ----- inner interface: ServiceProvider -------------------------------
/**
* A provider of nw service instances.
*/
public interface ServiceProvider
{
/**
* Create a new instance of a service.
*
* @param sName the name of the service
* @param cluster the owning {@link Cluster}
*
* @return the new service instance
*/
Service createService(String sName, Cluster cluster);
ServiceProvider NULL_IMPLEMENTATION = new ServiceProvider()
{
@Override
public Service createService(String sName, Cluster cluster)
{
return null;
}
};
}
// ----- constants ------------------------------------------------------
/**
* Perform no local shutdown logic before exiting the JVM.
*/
public static final int SHUTDOWN_NONE = 0;
/**
* Forcefully shutdown all running services before exiting the JVM.
*/
public static final int SHUTDOWN_FORCE = 1;
/**
* Gracefully shutdown all running services before exiting the JVM.
*/
public static final int SHUTDOWN_GRACEFUL = 2;
/**
* Data Client edition (DC).
*/
public static final int EDITION_DATA_CLIENT = 0;
/**
* Real time client edition (RTC).
*/
public static final int EDITION_REAL_TIME_CLIENT = 1;
/**
* Standard edition (SE).
*/
public static final int EDITION_STANDARD = 2;
/**
* Standard edition (SE).
*/
public static final int EDITION_COMMUNITY = 3;
/**
* Enterprise edition (EE).
*/
public static final int EDITION_ENTERPRISE = 4;
/**
* Grid Edition (GE).
*/
public static final int EDITION_GRID = 5;
/**
* Evaluation license.
*/
public static final int LICENSE_MODE_EVALUATION = 0;
/**
* Development license.
*/
public static final int LICENSE_MODE_DEVELOPMENT = 1;
/**
* Production license.
*/
public static final int LICENSE_MODE_PRODUCTION = 2;
}