// Generated by the protocol buffer compiler. DO NOT EDIT!
// source: google/api/quota.proto
package com.google.api;
public interface QuotaLimitOrBuilder extends
// @@protoc_insertion_point(interface_extends:google.api.QuotaLimit)
com.google.proto4pingcap.MessageOrBuilder {
/**
*
* Name of the quota limit. The name is used to refer to the limit when
* overriding the default limit on per-consumer basis.
* For group-based quota limits, the name must be unique within the quota
* group. If a name is not provided, it will be generated from the limit_by
* and duration fields.
* For metric-based quota limits, the name must be provided, and it must be
* unique within the service. The name can only include alphanumeric
* characters as well as '-'.
* The maximum length of the limit name is 64 characters.
* The name of a limit is used as a unique identifier for this limit.
* Therefore, once a limit has been put into use, its name should be
* immutable. You can use the display_name field to provide a user-friendly
* name for the limit. The display name can be evolved over time without
* affecting the identity of the limit.
*
*
* string name = 6;
*/
java.lang.String getName();
/**
*
* Name of the quota limit. The name is used to refer to the limit when
* overriding the default limit on per-consumer basis.
* For group-based quota limits, the name must be unique within the quota
* group. If a name is not provided, it will be generated from the limit_by
* and duration fields.
* For metric-based quota limits, the name must be provided, and it must be
* unique within the service. The name can only include alphanumeric
* characters as well as '-'.
* The maximum length of the limit name is 64 characters.
* The name of a limit is used as a unique identifier for this limit.
* Therefore, once a limit has been put into use, its name should be
* immutable. You can use the display_name field to provide a user-friendly
* name for the limit. The display name can be evolved over time without
* affecting the identity of the limit.
*
*
* string name = 6;
*/
com.google.proto4pingcap.ByteString
getNameBytes();
/**
*
* Optional. User-visible, extended description for this quota limit.
* Should be used only when more context is needed to understand this limit
* than provided by the limit's display name (see: `display_name`).
*
*
* string description = 2;
*/
java.lang.String getDescription();
/**
*
* Optional. User-visible, extended description for this quota limit.
* Should be used only when more context is needed to understand this limit
* than provided by the limit's display name (see: `display_name`).
*
*
* string description = 2;
*/
com.google.proto4pingcap.ByteString
getDescriptionBytes();
/**
*
* Default number of tokens that can be consumed during the specified
* duration. This is the number of tokens assigned when a client
* application developer activates the service for his/her project.
* Specifying a value of 0 will block all requests. This can be used if you
* are provisioning quota to selected consumers and blocking others.
* Similarly, a value of -1 will indicate an unlimited quota. No other
* negative values are allowed.
* Used by group-based quotas only.
*
*
* int64 default_limit = 3;
*/
long getDefaultLimit();
/**
*
* Maximum number of tokens that can be consumed during the specified
* duration. Client application developers can override the default limit up
* to this maximum. If specified, this value cannot be set to a value less
* than the default limit. If not specified, it is set to the default limit.
* To allow clients to apply overrides with no upper bound, set this to -1,
* indicating unlimited maximum quota.
* Used by group-based quotas only.
*
*
* int64 max_limit = 4;
*/
long getMaxLimit();
/**
*
* Free tier value displayed in the Developers Console for this limit.
* The free tier is the number of tokens that will be subtracted from the
* billed amount when billing is enabled.
* This field can only be set on a limit with duration "1d", in a billable
* group; it is invalid on any other limit. If this field is not set, it
* defaults to 0, indicating that there is no free tier for this service.
* Used by group-based quotas only.
*
*
* int64 free_tier = 7;
*/
long getFreeTier();
/**
*
* Duration of this limit in textual notation. Example: "100s", "24h", "1d".
* For duration longer than a day, only multiple of days is supported. We
* support only "100s" and "1d" for now. Additional support will be added in
* the future. "0" indicates indefinite duration.
* Used by group-based quotas only.
*
*
* string duration = 5;
*/
java.lang.String getDuration();
/**
*
* Duration of this limit in textual notation. Example: "100s", "24h", "1d".
* For duration longer than a day, only multiple of days is supported. We
* support only "100s" and "1d" for now. Additional support will be added in
* the future. "0" indicates indefinite duration.
* Used by group-based quotas only.
*
*
* string duration = 5;
*/
com.google.proto4pingcap.ByteString
getDurationBytes();
/**
*
* The name of the metric this quota limit applies to. The quota limits with
* the same metric will be checked together during runtime. The metric must be
* defined within the service config.
* Used by metric-based quotas only.
*
*
* string metric = 8;
*/
java.lang.String getMetric();
/**
*
* The name of the metric this quota limit applies to. The quota limits with
* the same metric will be checked together during runtime. The metric must be
* defined within the service config.
* Used by metric-based quotas only.
*
*
* string metric = 8;
*/
com.google.proto4pingcap.ByteString
getMetricBytes();
/**
*
* Specify the unit of the quota limit. It uses the same syntax as
* [Metric.unit][]. The supported unit kinds are determined by the quota
* backend system.
* The [Google Service Control](https://cloud.google.com/service-control)
* supports the following unit components:
* * One of the time intevals:
* * "/min" for quota every minute.
* * "/d" for quota every 24 hours, starting 00:00 US Pacific Time.
* * Otherwise the quota won't be reset by time, such as storage limit.
* * One and only one of the granted containers:
* * "/{organization}" quota for an organization.
* * "/{project}" quota for a project.
* * "/{folder}" quota for a folder.
* * "/{resource}" quota for a universal resource.
* * Zero or more quota segmentation dimension. Not all combos are valid.
* * "/{region}" quota for every region. Not to be used with time intervals.
* * Otherwise the resources granted on the target is not segmented.
* * "/{zone}" quota for every zone. Not to be used with time intervals.
* * Otherwise the resources granted on the target is not segmented.
* * "/{resource}" quota for a resource associated with a project or org.
* Here are some examples:
* * "1/min/{project}" for quota per minute per project.
* * "1/min/{user}" for quota per minute per user.
* * "1/min/{organization}" for quota per minute per organization.
* Note: the order of unit components is insignificant.
* The "1" at the beginning is required to follow the metric unit syntax.
* Used by metric-based quotas only.
*
*
* string unit = 9;
*/
java.lang.String getUnit();
/**
*
* Specify the unit of the quota limit. It uses the same syntax as
* [Metric.unit][]. The supported unit kinds are determined by the quota
* backend system.
* The [Google Service Control](https://cloud.google.com/service-control)
* supports the following unit components:
* * One of the time intevals:
* * "/min" for quota every minute.
* * "/d" for quota every 24 hours, starting 00:00 US Pacific Time.
* * Otherwise the quota won't be reset by time, such as storage limit.
* * One and only one of the granted containers:
* * "/{organization}" quota for an organization.
* * "/{project}" quota for a project.
* * "/{folder}" quota for a folder.
* * "/{resource}" quota for a universal resource.
* * Zero or more quota segmentation dimension. Not all combos are valid.
* * "/{region}" quota for every region. Not to be used with time intervals.
* * Otherwise the resources granted on the target is not segmented.
* * "/{zone}" quota for every zone. Not to be used with time intervals.
* * Otherwise the resources granted on the target is not segmented.
* * "/{resource}" quota for a resource associated with a project or org.
* Here are some examples:
* * "1/min/{project}" for quota per minute per project.
* * "1/min/{user}" for quota per minute per user.
* * "1/min/{organization}" for quota per minute per organization.
* Note: the order of unit components is insignificant.
* The "1" at the beginning is required to follow the metric unit syntax.
* Used by metric-based quotas only.
*
*
* string unit = 9;
*/
com.google.proto4pingcap.ByteString
getUnitBytes();
/**
*
* Tiered limit values. Also allows for regional or zone overrides for these
* values if "/{region}" or "/{zone}" is specified in the unit field.
* Currently supported tiers from low to high:
* VERY_LOW, LOW, STANDARD, HIGH, VERY_HIGH
* To apply different limit values for users according to their tiers, specify
* the values for the tiers you want to differentiate. For example:
* {LOW:100, STANDARD:500, HIGH:1000, VERY_HIGH:5000}
* The limit value for each tier is optional except for the tier STANDARD.
* The limit value for an unspecified tier falls to the value of its next
* tier towards tier STANDARD. For the above example, the limit value for tier
* STANDARD is 500.
* To apply the same limit value for all users, just specify limit value for
* tier STANDARD. For example: {STANDARD:500}.
* To apply a regional overide for a tier, add a map entry with key
* "<TIER>/<region>", where <region> is a region name. Similarly, for a zone
* override, add a map entry with key "<TIER>/{zone}".
* Further, a wildcard can be used at the end of a zone name in order to
* specify zone level overrides. For example:
* LOW: 10, STANDARD: 50, HIGH: 100,
* LOW/us-central1: 20, STANDARD/us-central1: 60, HIGH/us-central1: 200,
* LOW/us-central1-*: 10, STANDARD/us-central1-*: 20, HIGH/us-central1-*: 80
* The regional overrides tier set for each region must be the same as
* the tier set for default limit values. Same rule applies for zone overrides
* tier as well.
* Used by metric-based quotas only.
*
*
* map<string, int64> values = 10;
*/
int getValuesCount();
/**
*
* Tiered limit values. Also allows for regional or zone overrides for these
* values if "/{region}" or "/{zone}" is specified in the unit field.
* Currently supported tiers from low to high:
* VERY_LOW, LOW, STANDARD, HIGH, VERY_HIGH
* To apply different limit values for users according to their tiers, specify
* the values for the tiers you want to differentiate. For example:
* {LOW:100, STANDARD:500, HIGH:1000, VERY_HIGH:5000}
* The limit value for each tier is optional except for the tier STANDARD.
* The limit value for an unspecified tier falls to the value of its next
* tier towards tier STANDARD. For the above example, the limit value for tier
* STANDARD is 500.
* To apply the same limit value for all users, just specify limit value for
* tier STANDARD. For example: {STANDARD:500}.
* To apply a regional overide for a tier, add a map entry with key
* "<TIER>/<region>", where <region> is a region name. Similarly, for a zone
* override, add a map entry with key "<TIER>/{zone}".
* Further, a wildcard can be used at the end of a zone name in order to
* specify zone level overrides. For example:
* LOW: 10, STANDARD: 50, HIGH: 100,
* LOW/us-central1: 20, STANDARD/us-central1: 60, HIGH/us-central1: 200,
* LOW/us-central1-*: 10, STANDARD/us-central1-*: 20, HIGH/us-central1-*: 80
* The regional overrides tier set for each region must be the same as
* the tier set for default limit values. Same rule applies for zone overrides
* tier as well.
* Used by metric-based quotas only.
*
*
* map<string, int64> values = 10;
*/
boolean containsValues(
java.lang.String key);
/**
* Use {@link #getValuesMap()} instead.
*/
@java.lang.Deprecated
java.util.Map
getValues();
/**
*
* Tiered limit values. Also allows for regional or zone overrides for these
* values if "/{region}" or "/{zone}" is specified in the unit field.
* Currently supported tiers from low to high:
* VERY_LOW, LOW, STANDARD, HIGH, VERY_HIGH
* To apply different limit values for users according to their tiers, specify
* the values for the tiers you want to differentiate. For example:
* {LOW:100, STANDARD:500, HIGH:1000, VERY_HIGH:5000}
* The limit value for each tier is optional except for the tier STANDARD.
* The limit value for an unspecified tier falls to the value of its next
* tier towards tier STANDARD. For the above example, the limit value for tier
* STANDARD is 500.
* To apply the same limit value for all users, just specify limit value for
* tier STANDARD. For example: {STANDARD:500}.
* To apply a regional overide for a tier, add a map entry with key
* "<TIER>/<region>", where <region> is a region name. Similarly, for a zone
* override, add a map entry with key "<TIER>/{zone}".
* Further, a wildcard can be used at the end of a zone name in order to
* specify zone level overrides. For example:
* LOW: 10, STANDARD: 50, HIGH: 100,
* LOW/us-central1: 20, STANDARD/us-central1: 60, HIGH/us-central1: 200,
* LOW/us-central1-*: 10, STANDARD/us-central1-*: 20, HIGH/us-central1-*: 80
* The regional overrides tier set for each region must be the same as
* the tier set for default limit values. Same rule applies for zone overrides
* tier as well.
* Used by metric-based quotas only.
*
*
* map<string, int64> values = 10;
*/
java.util.Map
getValuesMap();
/**
*
* Tiered limit values. Also allows for regional or zone overrides for these
* values if "/{region}" or "/{zone}" is specified in the unit field.
* Currently supported tiers from low to high:
* VERY_LOW, LOW, STANDARD, HIGH, VERY_HIGH
* To apply different limit values for users according to their tiers, specify
* the values for the tiers you want to differentiate. For example:
* {LOW:100, STANDARD:500, HIGH:1000, VERY_HIGH:5000}
* The limit value for each tier is optional except for the tier STANDARD.
* The limit value for an unspecified tier falls to the value of its next
* tier towards tier STANDARD. For the above example, the limit value for tier
* STANDARD is 500.
* To apply the same limit value for all users, just specify limit value for
* tier STANDARD. For example: {STANDARD:500}.
* To apply a regional overide for a tier, add a map entry with key
* "<TIER>/<region>", where <region> is a region name. Similarly, for a zone
* override, add a map entry with key "<TIER>/{zone}".
* Further, a wildcard can be used at the end of a zone name in order to
* specify zone level overrides. For example:
* LOW: 10, STANDARD: 50, HIGH: 100,
* LOW/us-central1: 20, STANDARD/us-central1: 60, HIGH/us-central1: 200,
* LOW/us-central1-*: 10, STANDARD/us-central1-*: 20, HIGH/us-central1-*: 80
* The regional overrides tier set for each region must be the same as
* the tier set for default limit values. Same rule applies for zone overrides
* tier as well.
* Used by metric-based quotas only.
*
*
* map<string, int64> values = 10;
*/
long getValuesOrDefault(
java.lang.String key,
long defaultValue);
/**
*
* Tiered limit values. Also allows for regional or zone overrides for these
* values if "/{region}" or "/{zone}" is specified in the unit field.
* Currently supported tiers from low to high:
* VERY_LOW, LOW, STANDARD, HIGH, VERY_HIGH
* To apply different limit values for users according to their tiers, specify
* the values for the tiers you want to differentiate. For example:
* {LOW:100, STANDARD:500, HIGH:1000, VERY_HIGH:5000}
* The limit value for each tier is optional except for the tier STANDARD.
* The limit value for an unspecified tier falls to the value of its next
* tier towards tier STANDARD. For the above example, the limit value for tier
* STANDARD is 500.
* To apply the same limit value for all users, just specify limit value for
* tier STANDARD. For example: {STANDARD:500}.
* To apply a regional overide for a tier, add a map entry with key
* "<TIER>/<region>", where <region> is a region name. Similarly, for a zone
* override, add a map entry with key "<TIER>/{zone}".
* Further, a wildcard can be used at the end of a zone name in order to
* specify zone level overrides. For example:
* LOW: 10, STANDARD: 50, HIGH: 100,
* LOW/us-central1: 20, STANDARD/us-central1: 60, HIGH/us-central1: 200,
* LOW/us-central1-*: 10, STANDARD/us-central1-*: 20, HIGH/us-central1-*: 80
* The regional overrides tier set for each region must be the same as
* the tier set for default limit values. Same rule applies for zone overrides
* tier as well.
* Used by metric-based quotas only.
*
*
* map<string, int64> values = 10;
*/
long getValuesOrThrow(
java.lang.String key);
/**
*
* User-visible display name for this limit.
* Optional. If not set, the UI will provide a default display name based on
* the quota configuration. This field can be used to override the default
* display name generated from the configuration.
*
*
* string display_name = 12;
*/
java.lang.String getDisplayName();
/**
*
* User-visible display name for this limit.
* Optional. If not set, the UI will provide a default display name based on
* the quota configuration. This field can be used to override the default
* display name generated from the configuration.
*
*
* string display_name = 12;
*/
com.google.proto4pingcap.ByteString
getDisplayNameBytes();
}
