com.simpligility.maven.plugins.android.standalonemojos.MonkeyMojo Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of android-maven-plugin Show documentation
Show all versions of android-maven-plugin Show documentation
Maven Plugin for Android Development
The newest version!
/*
* Copyright (C) 2009 Jayway AB
* Copyright (C) 2007-2008 JVending Masa
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.simpligility.maven.plugins.android.standalonemojos;
import java.io.IOException;
import org.apache.maven.plugin.MojoExecutionException;
import org.apache.maven.plugin.MojoFailureException;
import org.apache.maven.plugins.annotations.Mojo;
import org.apache.maven.plugins.annotations.Parameter;
import com.android.ddmlib.AdbCommandRejectedException;
import com.android.ddmlib.IDevice;
import com.android.ddmlib.ShellCommandUnresponsiveException;
import com.android.ddmlib.TimeoutException;
import com.android.ddmlib.testrunner.MonkeyTestRunner;
import com.simpligility.maven.plugins.android.AbstractAndroidMojo;
import com.simpligility.maven.plugins.android.AndroidTestRunListener;
import com.simpligility.maven.plugins.android.DeviceCallback;
import com.simpligility.maven.plugins.android.common.DeviceHelper;
import com.simpligility.maven.plugins.android.config.ConfigHandler;
import com.simpligility.maven.plugins.android.config.ConfigPojo;
import com.simpligility.maven.plugins.android.config.PullParameter;
import com.simpligility.maven.plugins.android.configuration.Monkey;
/**
* Can execute tests using UI/Application Exerciser Monkey.
* Implements parsing parameters from pom or command line arguments and sets useful defaults as well. This goal will
* invoke Android Monkey exerciser. If the application crashes during the exercise, this goal can fail the build.
* A typical usage of this goal can be found at Quality tools for Android project.
*
* @see Monkey docs by Google
* @see Stack Over Flow thread for parsing monkey output.
* @author Stéphane Nicolas - [email protected]
*/
@SuppressWarnings( "unused" )
@Mojo( name = "monkey" )
public class MonkeyMojo extends AbstractAndroidMojo
{
/**
* -Dmaven.test.skip is commonly used with Maven to skip tests. We honor it.
*/
@Parameter( property = "maven.test.skip", defaultValue = "false", readonly = true )
private boolean mavenTestSkip;
/**
* -DskipTests is commonly used with Maven to skip tests. We honor it too.
*/
@Parameter( property = "skipTests", defaultValue = "false", readonly = true )
private boolean mavenSkipTests;
/**
* -Dmaven.test.failure.ignore is commonly used with Maven to prevent failure of build when (some) tests fail. We
* honor it too.
*/
@Parameter( property = "maven.test.failure.ignore", defaultValue = "false", readonly = true )
private boolean mavenTestFailureIgnore;
/**
* -Dmaven.test.failure.ignore is commonly used with Maven to prevent failure of build when (some) tests fail. We
* honor it too.
*/
@Parameter( property = "testFailureIgnore", defaultValue = "false", readonly = true )
private boolean mavenIgnoreTestFailure;
/**
* The configuration for the ui automator goal. As soon as a lint goal is invoked the command will be executed
* unless the skip parameter is set. A minimal configuration that will run lint and produce a XML report in
* ${project.build.directory}/lint/lint-results.xml is
*
*
* <monkey>
* <skip>false</skip>
* </monkey>
*
*
* Full configuration can use these parameters.
*
*
* <monkey>
* <skip>false</skip>
* <eventCount>5000</eventCount>
* <seed>123456</seed>
* <throttle>10</throttle>
* <percentTouch>10</percentTouch>
* <percentMotion>10</percentMotion>
* <percentTrackball>10</percentTrackball>
* <percentNav>10</percentNav>
* <percentMajorNav>10</percentMajorNav>
* <percentSyskeys>10</percentSyskeys>
* <percentAppswitch>10</percentAppswitch>
* <percentAnyevent>10</percentAnyevent>
* <packages>
* <package>com.foo</package>
* <package>com.bar</package>
* </packages>
* <categories>
* <category>foo</category>
* <category>bar</category>
* </categories>
* <debugNoEvents>true</debugNoEvents>
* <hprof>true</hprof>
* <ignoreCrashes>true</ignoreCrashes>
* <ignoreTimeouts>true</ignoreTimeouts>
* <ignoreSecurityExceptions>true</ignoreSecurityExceptions>
* <killProcessAfterError>true</killProcessAfterError>
* <monitorNativeCrashes>true</monitorNativeCrashes>
* <createReport>true</createReport>
* </monkey>
*
*
* Alternatively to the plugin configuration values can also be configured as properties on the command line as
* android.lint.* or in pom or settings file as properties like lint*.
*/
@Parameter
@ConfigPojo
private Monkey monkey;
/**
* Enables or disables monkey test goal. If true it will be skipped; if false, it will be
* run. Defaults to true.
*/
@Parameter( property = "android.monkey.skip" )
private Boolean monkeySkip;
@PullParameter( defaultValue = "true" )
private Boolean parsedSkip;
/**
* Number of generated events. Defaults to 1000.
*/
@Parameter( property = "android.monkey.eventCount" )
private Integer monkeyEventCount;
@PullParameter( required = true, defaultValue = "1000" )
private Integer parsedEventCount;
/**
* Seed value for pseudo-random number generator. If you re-run the Monkey with the same seed value, it will
* generate the same sequence of events.
*/
@Parameter( property = "android.monkey.seed" )
private Long monkeySeed;
@PullParameter( required = false, defaultValueGetterMethod = "getSeed" )
private Long parsedSeed;
/**
* Inserts a fixed delay between events. You can use this option to slow down the Monkey. If not specified, there is
* no delay and the events are generated as rapidly as possible.
*/
@Parameter( property = "android.monkey.throttle" )
private Long monkeyThrottle;
@PullParameter( required = false, defaultValueGetterMethod = "getThrottle" )
private Long parsedThrottle;
/**
* Adjust percentage of touch events. (Touch events are a down-up event in a single place on the screen.)
*/
@Parameter( property = "android.monkey.percentTouch" )
private Integer monkeyPercentTouch;
@PullParameter( required = false, defaultValueGetterMethod = "getPercentTouch" )
private Integer parsedPercentTouch;
/**
* Adjust percentage of motion events. (Motion events consist of a down event somewhere on the screen, a series of
* pseudo-random movements, and an up event.)
*/
@Parameter( property = "android.monkey.percentMotion" )
private Integer monkeyPercentMotion;
@PullParameter( required = false, defaultValueGetterMethod = "getPercentMotion" )
private Integer parsedPercentMotion;
/**
* Adjust percentage of trackball events. (Trackball events consist of one or more random movements, sometimes
* followed by a click.)
*/
@Parameter( property = "android.monkey.percentTrackball" )
private Integer monkeyPercentTrackball;
@PullParameter( required = false, defaultValueGetterMethod = "getPercentTrackball" )
private Integer parsedPercentTrackball;
/**
* Adjust percentage of "basic" navigation events. (Navigation events consist of up/down/left/right, as input from a
* directional input device.)
*/
@Parameter( property = "android.monkey.percentNav" )
private Integer monkeyPercentNav;
@PullParameter( required = false, defaultValueGetterMethod = "getPercentNav" )
private Integer parsedPercentNav;
/**
* Adjust percentage of "major" navigation events. (These are navigation events that will typically cause actions
* within your UI, such as the center button in a 5-way pad, the back key, or the menu key.)
*/
@Parameter( property = "android.monkey.percentMajorNav" )
private Integer monkeyPercentMajorNav;
@PullParameter( required = false, defaultValueGetterMethod = "getPercentMajorNav" )
private Integer parsedPercentMajorNav;
/**
* Adjust percentage of "system" key events. (These are keys that are generally reserved for use by the system, such
* as Home, Back, Start Call, End Call, or Volume controls.) Defaults to null.
*/
@Parameter( property = "android.monkey.percentSyskeys" )
private Integer monkeyPercentSyskeys;
@PullParameter( required = false, defaultValueGetterMethod = "getPercentSyskeys" )
private Integer parsedPercentSyskeys;
/**
* Adjust percentage of activity launches. At random intervals, the Monkey will issue a startActivity() call, as a
* way of maximizing coverage of all activities within your package.
*/
@Parameter( property = "android.monkey.percentAppswitch" )
private Integer monkeyPercentAppswitch;
@PullParameter( required = false, defaultValueGetterMethod = "getPercentAppswitch" )
private Integer parsedPercentAppswitch;
/**
* Adjust percentage of other types of events. This is a catch-all for all other types of events such as keypresses,
* other less-used buttons on the device, and so forth.
*/
@Parameter( property = "android.monkey.percentAnyevent" )
private Integer monkeyPercentAnyEvent;
@PullParameter( required = false, defaultValueGetterMethod = "getPercentAnyevent" )
private Integer parsedPercentAnyevent;
/**
* If you specify one or more packages this way, the Monkey will only allow the system to visit activities within
* those packages. If your application requires access to activities in other packages (e.g. to select a contact)
* you'll need to specify those packages as well. If you don't specify any packages, the Monkey will allow the
* system to launch activities in all packages.
*/
@Parameter( property = "android.monkey.packages" )
private String[] monkeyPackages;
@PullParameter( required = false, defaultValueGetterMethod = "getPackages" )
private String[] parsedPackages;
/**
* If you specify one or more categories this way, the Monkey will only allow the system to visit activities that
* are listed with one of the specified categories. If you don't specify any categories, the Monkey will select
* activities listed with the category Intent.CATEGORY_LAUNCHER or Intent.CATEGORY_MONKEY.
*/
@Parameter( property = "android.monkey.categories" )
private String[] monkeyCategories;
@PullParameter( required = false, defaultValueGetterMethod = "getCategories" )
private String[] parsedCategories;
/**
* When specified, the Monkey will perform the initial launch into a test activity, but will not generate any
* further events. For best results, combine with -v, one or more package constraints, and a non-zero throttle to
* keep the Monkey running for 30 seconds or more. This provides an environment in which you can monitor package
* transitions invoked by your application.
*/
@Parameter( property = "android.monkey.debugNoEvents" )
private Boolean monkeyDebugNoEvents;
@PullParameter( defaultValue = "false" )
private Boolean parsedDebugNoEvents;
/**
* If set, this option will generate profiling reports immediately before and after the Monkey event sequence. This
* will generate large (~5Mb) files in data/misc, so use with care. See Traceview for more information on trace
* files.
*/
@Parameter( property = "android.monkey.Hprof" )
private Boolean monkeyHprof;
@PullParameter( defaultValue = "false" )
private Boolean parsedHprof;
/**
* Normally, the Monkey will stop when the application crashes or experiences any type of unhandled exception. If
* you specify this option, the Monkey will continue to send events to the system, until the count is completed.
* Settings this option is different to setting testFailureIgnore or maven.test.failure.ignore to true, it will
* impact monkey run but not the result of the maven build.
*/
@Parameter( property = "android.monkey.ignoreCrashes" )
private Boolean monkeyIgnoreCrashes;
@PullParameter( defaultValue = "false" )
private Boolean parsedIgnoreCrashes;
/**
* Normally, the Monkey will stop when the application experiences any type of timeout error such as a
* "Application Not Responding" dialog. If you specify this option, the Monkey will continue to send events to the
* system, until the count is completed.
*
* Defaults to false.
*/
@Parameter( property = "android.monkey.IgnoreTimeouts" )
private Boolean monkeyIgnoreTimeouts;
@PullParameter( defaultValue = "false" )
private Boolean parsedIgnoreTimeouts;
/**
* Normally, the Monkey will stop when the application experiences any type of permissions error, for example if it
* attempts to launch an activity that requires certain permissions. If you specify this option, the Monkey will
* continue to send events to the system, until the count is completed. *
*
* Defaults to false.
*/
@Parameter( property = "android.monkey.IgnoreSecurityExceptions" )
private Boolean monkeyIgnoreSecurityExceptions;
@PullParameter( defaultValue = "false" )
private Boolean parsedIgnoreSecurityExceptions;
/**
* Normally, when the Monkey stops due to an error, the application that failed will be left running. When this
* option is set, it will signal the system to stop the process in which the error occurred. Note, under a normal
* (successful) completion, the launched process(es) are not stopped, and the device is simply left in the last
* state after the final event.
*
* Defaults to false.
*/
@Parameter( property = "android.monkey.KillProcessAfterError" )
private Boolean monkeyKillProcessAfterError;
@PullParameter( defaultValue = "false" )
private Boolean parsedKillProcessAfterError;
/**
* Watches for and reports crashes occurring in the Android system native code. If --kill-process-after-error is
* set, the system will stop.
*
* Defaults to false.
*/
@Parameter( property = "android.monkey.MonitorNativeCrashes" )
private Boolean monkeyMonitorNativeCrashes;
@PullParameter( defaultValue = "false" )
private Boolean parsedMonitorNativeCrashes;
/**
* Create a junit xml format compatible output file containing the test results for each device the instrumentation
* tests run on.
*
* The files are stored in target/surefire-reports and named TEST-deviceid.xml. The deviceid for an emulator is
* deviceSerialNumber_avdName_manufacturer_model. The serial number is commonly emulator-5554 for the first emulator
* started with numbers increasing. avdName is as defined in the SDK tool. The manufacturer is typically "unknown"
* and the model is typically "sdk".
* The deviceid for an actual devices is deviceSerialNumber_manufacturer_model.
*
* The file contains system properties from the system running the Android Maven Plugin (JVM) and device properties
* from the device/emulator the tests are running on.
*
* The file contains a single TestSuite for all tests and a TestCase for each test method. Errors and failures are
* logged in the file and the system log with full stack traces and other details available.
*
* Defaults to false.
*/
@Parameter( property = "android.monkey.createReport" )
private Boolean monkeyCreateReport;
@PullParameter( defaultValue = "false" )
private Boolean parsedCreateReport;
@Override
public void execute() throws MojoExecutionException, MojoFailureException
{
ConfigHandler configHandler = new ConfigHandler( this, this.session, this.execution );
configHandler.parseConfiguration();
if ( isEnableIntegrationTest() )
{
exerciseApp();
}
}
/**
* Whether or not tests are enabled.
*
* @return a boolean indicating whether or not tests are enabled.
*/
protected boolean isEnableIntegrationTest()
{
return !parsedSkip && !mavenTestSkip && !mavenSkipTests;
}
/**
* Whether or not test failures should be ignored.
*
* @return a boolean indicating whether or not test failures should be ignored.
*/
protected boolean isIgnoreTestFailures()
{
return mavenIgnoreTestFailure || mavenTestFailureIgnore;
}
/**
* Actually plays tests.
*
* @throws MojoExecutionException
* if exercising app threw an exception and isIgnoreTestFailures is false..
* @throws MojoFailureException
* if exercising app failed and isIgnoreTestFailures is false.
*/
protected void exerciseApp() throws MojoExecutionException, MojoFailureException
{
getLog().debug( "Parsed values for Android Monkey invocation: " );
getLog().debug( "seed:" + parsedSeed );
DeviceCallback instrumentationTestExecutor = new DeviceCallback()
{
@Override
public void doWithDevice( final IDevice device ) throws MojoExecutionException, MojoFailureException
{
String deviceLogLinePrefix = DeviceHelper.getDeviceLogLinePrefix( device );
MonkeyTestRunner monkeyTestRunner = new MonkeyTestRunner( parsedEventCount, device );
monkeyTestRunner.setRunName( "ui monkey tests" );
if ( parsedSeed != null )
{
monkeyTestRunner.setSeed( parsedSeed );
}
if ( parsedPercentTouch != null )
{
monkeyTestRunner.setPercentTouch( parsedPercentTouch );
}
if ( parsedPercentMotion != null )
{
monkeyTestRunner.setPercentTouch( parsedPercentMotion );
}
if ( parsedPercentTrackball != null )
{
monkeyTestRunner.setPercentTrackball( parsedPercentTrackball );
}
if ( parsedPercentNav != null )
{
monkeyTestRunner.setPercentNav( parsedPercentNav );
}
if ( parsedPercentMajorNav != null )
{
monkeyTestRunner.setPercentMajorNav( parsedPercentMajorNav );
}
if ( parsedPercentSyskeys != null )
{
monkeyTestRunner.setPercentSyskeys( parsedPercentSyskeys );
}
if ( parsedPercentAppswitch != null )
{
monkeyTestRunner.setPercentAppswitch( parsedPercentAppswitch );
}
if ( parsedPercentAnyevent != null )
{
monkeyTestRunner.setPercentAnyEvent( parsedPercentAnyevent );
}
if ( parsedPackages != null )
{
monkeyTestRunner.setPackages( parsedPackages );
}
if ( parsedCategories != null )
{
monkeyTestRunner.setCategories( parsedCategories );
}
monkeyTestRunner.setDebugNoEvents( parsedDebugNoEvents );
monkeyTestRunner.setHprof( parsedHprof );
monkeyTestRunner.setIgnoreCrashes( parsedIgnoreCrashes );
monkeyTestRunner.setIgnoreTimeouts( parsedIgnoreTimeouts );
monkeyTestRunner.setIgnoreSecurityExceptions( parsedIgnoreSecurityExceptions );
monkeyTestRunner.setKillProcessAfterError( parsedKillProcessAfterError );
monkeyTestRunner.setMonitorNativeCrash( parsedMonitorNativeCrashes );
getLog().info( deviceLogLinePrefix + "Running ui monkey tests" );
try
{
AndroidTestRunListener testRunListener = new AndroidTestRunListener( device, getLog(),
parsedCreateReport, false, "", "", targetDirectory );
monkeyTestRunner.run( testRunListener );
if ( testRunListener.hasFailuresOrErrors() && !isIgnoreTestFailures() )
{
throw new MojoFailureException( deviceLogLinePrefix + "Tests failed on device." );
}
if ( testRunListener.testRunFailed() )
{
throw new MojoFailureException( deviceLogLinePrefix + "Test run failed to complete: "
+ testRunListener.getTestRunFailureCause() );
}
if ( testRunListener.threwException() && !isIgnoreTestFailures() )
{
throw new MojoFailureException( deviceLogLinePrefix + testRunListener.getExceptionMessages() );
}
}
catch ( TimeoutException e )
{
throw new MojoExecutionException( deviceLogLinePrefix + "timeout", e );
}
catch ( AdbCommandRejectedException e )
{
throw new MojoExecutionException( deviceLogLinePrefix + "adb command rejected", e );
}
catch ( ShellCommandUnresponsiveException e )
{
throw new MojoExecutionException( deviceLogLinePrefix + "shell command " + "unresponsive", e );
}
catch ( IOException e )
{
throw new MojoExecutionException( deviceLogLinePrefix + "IO problem", e );
}
}
};
doWithDevices( instrumentationTestExecutor );
}
/**
* @return default seed.
*/
// used via PullParameter annotation - do not remove
private Long getSeed()
{
return parsedSeed;
}
/**
* @return default throttle.
*/
// used via PullParameter annotation - do not remove
private Long getThrottle()
{
return parsedThrottle;
}
/**
* @return default percentTouch.
*/
// used via PullParameter annotation - do not remove
private Integer getPercentTouch()
{
return parsedPercentTouch;
}
/**
* @return default percentMotion.
*/
// used via PullParameter annotation - do not remove
private Integer getPercentMotion()
{
return parsedPercentMotion;
}
/**
* @return default percentTrackball.
*/
// used via PullParameter annotation - do not remove
private Integer getPercentTrackball()
{
return parsedPercentTrackball;
}
/**
* @return default percentNav.
*/
// used via PullParameter annotation - do not remove
private Integer getPercentNav()
{
return parsedPercentNav;
}
/**
* @return default percentMajorNav.
*/
// used via PullParameter annotation - do not remove
private Integer getPercentMajorNav()
{
return parsedPercentMajorNav;
}
/**
* @return default percentSyskeys.
*/
// used via PullParameter annotation - do not remove
private Integer getPercentSyskeys()
{
return parsedPercentSyskeys;
}
/**
* @return default percentAppSwitch.
*/
// used via PullParameter annotation - do not remove
private Integer getPercentAppswitch()
{
return parsedPercentAppswitch;
}
/**
* @return default percentAnyEvent.
*/
// used via PullParameter annotation - do not remove
private Integer getPercentAnyevent()
{
return parsedPercentAnyevent;
}
/**
* @return default packages.
*/
public String[] getPackages()
{
return parsedPackages;
}
/**
* @return default categories.
*/
public String[] getCategories()
{
return parsedCategories;
}
}