com.stormpath.sdk.application.Application Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of stormpath-sdk-api Show documentation
Show all versions of stormpath-sdk-api Show documentation
The Stormpath Java SDK API .jar provides a Java API that your code can use to make calls to the Stormpath
API. This .jar is the only compile-time dependency within the Stormpath SDK project that your code should
depend on. Implementations of this API (implementation .jars) should be runtime dependencies only.
The newest version!
/*
* Copyright 2016 Stormpath, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.stormpath.sdk.application;
import com.stormpath.sdk.account.Account;
import com.stormpath.sdk.account.AccountCriteria;
import com.stormpath.sdk.account.AccountLinker;
import com.stormpath.sdk.account.AccountList;
import com.stormpath.sdk.account.CreateAccountRequest;
import com.stormpath.sdk.account.PasswordResetToken;
import com.stormpath.sdk.account.VerificationEmailRequest;
import com.stormpath.sdk.api.ApiKey;
import com.stormpath.sdk.api.ApiKeyOptions;
import com.stormpath.sdk.application.webconfig.ApplicationWebConfig;
import com.stormpath.sdk.authc.AuthenticationRequest;
import com.stormpath.sdk.authc.AuthenticationResult;
import com.stormpath.sdk.authc.UsernamePasswordRequestBuilder;
import com.stormpath.sdk.directory.AccountStore;
import com.stormpath.sdk.directory.Directory;
import com.stormpath.sdk.directory.DirectoryCriteria;
import com.stormpath.sdk.group.CreateGroupRequest;
import com.stormpath.sdk.group.Group;
import com.stormpath.sdk.group.GroupCriteria;
import com.stormpath.sdk.group.GroupList;
import com.stormpath.sdk.idsite.IdSiteCallbackHandler;
import com.stormpath.sdk.idsite.IdSiteUrlBuilder;
import com.stormpath.sdk.oauth.OAuthPolicy;
import com.stormpath.sdk.organization.Organization;
import com.stormpath.sdk.organization.OrganizationCriteria;
import com.stormpath.sdk.provider.ProviderAccountRequest;
import com.stormpath.sdk.provider.ProviderAccountResult;
import com.stormpath.sdk.resource.Auditable;
import com.stormpath.sdk.resource.Deletable;
import com.stormpath.sdk.resource.Extendable;
import com.stormpath.sdk.resource.Resource;
import com.stormpath.sdk.resource.ResourceException;
import com.stormpath.sdk.resource.Saveable;
import com.stormpath.sdk.saml.SamlCallbackHandler;
import com.stormpath.sdk.saml.SamlIdpUrlBuilder;
import com.stormpath.sdk.saml.SamlPolicy;
import com.stormpath.sdk.tenant.Tenant;
import java.util.List;
import java.util.Map;
/**
* An {@code Application} instance represents a Stormpath
* registered application.
*
* @since 0.1
*/
public interface Application extends AccountStoreHolder, Resource, Saveable, Deletable, Extendable, Auditable, AccountLinker {
/**
* Returns the Application's name. An application's name must be unique across all other applications in the
* owning Tenant.
*
* @return the Application's name
*/
String getName();
/**
* Sets the application's name. Application names must be unique within a Tenant.
*
* @param name tenant-unique name of the application.
* @return this instance for method chaining.
*/
Application setName(String name);
/**
* Returns the application description.
*
* @return the application description.
*/
String getDescription();
/**
* Sets the application description.
*
* @param description the application description.
* @return this instance for method chaining.
*/
Application setDescription(String description);
/**
* Returns the application's status. Application users may login to an enabled application. They may not login
* to a disabled application.
*
* @return the application's status.
*/
ApplicationStatus getStatus();
/**
* Sets the application's status. Application users may login to an enabled application. They may not login
* to a disabled application.
*
* @param status the application's status.
* @return this instance for method chaining.
*/
Application setStatus(ApplicationStatus status);
/**
* Returns a paginated list of all accounts that may login to the application.
*
* Tip: Instead of iterating over all accounts, it might be more convenient (and practical) to execute a search
* for one or more accounts using the {@link #getAccounts(com.stormpath.sdk.account.AccountCriteria)} or
* {@link #getAccounts(java.util.Map)} methods instead of this one.
*
* @return a paginated list of all accounts that may login to the application.
* @see #getAccounts(com.stormpath.sdk.account.AccountCriteria)
* @see #getAccounts(java.util.Map)
*/
AccountList getAccounts();
/**
* Returns a paginated list of the accounts that may login to the application that also match the specified query
* criteria.
*
* Each {@code queryParams} key/value pair will be converted to String name to String value pairs and appended to
* the resource URL as query parameters, for example:
*
* .../applications/applicationId/accounts?param1=value1¶m2=value2&...
*
*
* @param queryParams the query parameters to use when performing a request to the collection.
* @return a paginated list of the application's accounts that match the specified query criteria.
* @since 0.8
*/
AccountList getAccounts(Map queryParams);
/**
* Returns a paginated list of the accounts that may login to the application that also match the specified query
* criteria.
* The {@link com.stormpath.sdk.account.Accounts Accounts} utility class is available to help construct
* the criteria DSL. For example:
*
* application.getAccounts(Accounts
* .where(Accounts.surname().containsIgnoreCase("Smith"))
* .and(Accounts.givenName().eqIgnoreCase("John"))
* .orderBySurname().descending()
* .withGroups(10, 10)
* .offsetBy(20)
* .limitTo(25));
*
* or, if using static imports:
*
* import static com.stormpath.sdk.account.Accounts.*;
*
* ...
*
* application.getAccounts(where(
* surname().containsIgnoreCase("Smith"))
* .and(givenName().eqIgnoreCase("John"))
* .orderBySurname().descending()
* .withGroups(10, 10)
* .offsetBy(20)
* .limitTo(25));
*
*
* @param criteria the criteria to use when performing a request to the collection.
* @return a paginated list of the application's accounts that match the specified query criteria.
* @since 0.8
*/
AccountList getAccounts(AccountCriteria criteria);
/**
* Creates a new Account that may login to this application.
*
* This is mostly a convenience method; it delegates creation to the Application's designated
* {@link #getDefaultAccountStore() defaultAccountStore}, and functions as follows:
*
*
* - If the {@code defaultAccountStore} is a Directory: the account is created in the Directory and
* returned.
* - If the {@code defaultAccountStore} is a Group: the account is created in the Group's Directory, assigned to
* the Group, and then returned.
*
*
*
* @param account the account to create/persist
* @return a new Account that may login to this application.
* @throws ResourceException if the Application does not have a designated {@link #getDefaultAccountStore()
* defaultAccountStore}
* or if the designated {@code defaultAccountStore} does not allow new accounts to be
* created.
* @since 0.9
*/
Account createAccount(Account account) throws ResourceException;
/**
* Creates a new Account that may login to this application according to the request criteria.
*
* This is mostly a convenience method; it delegates creation to the Application's designated
* {@link #getDefaultAccountStore() defaultAccountStore}, and functions as follows:
*
* - If the {@code defaultAccountStore} is a Directory: the account is created in the Directory and
* returned.
* - If the {@code defaultAccountStore} is a Group: the account is created in the Group's Directory, assigned to
* the Group, and then returned.
*
*
* Example
*
* application.createAccount(Accounts.newCreateRequestFor(account).build());
*
*
* If you would like to force disabling the backing directory's account registration workflow:
*
* application.createAccount(Accounts.newCreateRequestFor(account).setRegistrationWorkflowEnabled(false).build());
*
* If you would like to force the execution of the registration workflow, no matter what the backing directory
* configuration is:
*
* application.createAccount(Accounts.newCreateRequestFor(account).setRegistrationWorkflowEnabled(true).build());
*
* If you would like to retrieve the account's custom data in the response of the account creation.
*
* application.createAccount(Accounts.newCreateRequestFor(account).withResponseOptions(Accounts.options().withCustomData()).build());
*
*
*
* @param request the account creation request
* @return a new Account that may login to this application.
* @throws ResourceException if the Application does not have a designated {@link #getDefaultAccountStore()
* defaultAccountStore}
* or if the designated {@code defaultAccountStore} does not allow new accounts to be
* created.
* @since 0.9
*/
Account createAccount(CreateAccountRequest request) throws ResourceException;
/**
* Returns all Groups accessible to the application. It will not only return any group associated directly as an
* {@link AccountStore} but also every group that exists inside every directory associated as an account store.
*
* These groups can be used role-based access control checks, for example, 'if a user is in the admin group, allow
* them to delete a user'.
*
* If you want to control which accounts can login to an application, you control that via the application's AccountStoreMappings
* collection, not this method.
*
* Tip: Instead of iterating over all groups, it might be more convenient (and practical) to execute a search
* for one or more groups using the {@link #getGroups(java.util.Map)} method instead of this one.
*
* @return all Groups accessible to the application (based on the Application's associated Account stores).
* @see #getGroups(java.util.Map)
* @since 0.8
*/
GroupList getGroups();
/**
* Returns a paginated list of the groups accessible to the application (based on the app's mapped Account stores)
* that also match the specified query criteria.
*
* Each {@code queryParams} key/value pair will be converted to String name to String value pairs and appended to
* the resource URL as query parameters, for example:
*
* .../applications/applicationId/groups?param1=value1¶m2=value2&...
*
*
* @param queryParams the query parameters to use when performing a request to the collection.
* @return a paginated list of the application's groups that match the specified query criteria.
* @since 0.8
*/
GroupList getGroups(Map queryParams);
/**
* Returns a paginated list of the groups accessible to the application (based on the app's mapped Account stores)
* that also match the specified query criteria.
* The {@link com.stormpath.sdk.group.Groups Groups} utility class is available to help construct
* the criteria DSL. For example:
*
* application.getGroups(Groups
* .where(Groups.description().containsIgnoreCase("foo"))
* .and(Groups.name().startsWithIgnoreCase("bar"))
* .orderByName().descending()
* .withAccounts(10, 10)
* .offsetBy(20)
* .limitTo(25));
*
* or, if using static imports:
*
* import static com.stormpath.sdk.group.Groups.*;
*
* ...
*
* application.getGroups(where(
* description().containsIgnoreCase("foo"))
* .and(name().startsWithIgnoreCase("bar"))
* .orderByName().descending()
* .withAccounts(10, 10)
* .offsetBy(20)
* .limitTo(25));
*
*
* @param criteria the criteria to use when performing a request to the collection.
* @return a paginated list of the application's accessible groups that match the specified query criteria.
* @since 0.8
*/
GroupList getGroups(GroupCriteria criteria);
/**
* Creates a new Group that may be used by this application in the application's
* {@link #getDefaultGroupStore() defaultGroupStore}
*
* This is a convenience method. It merely delegates to the Application's designated
* {@link #getDefaultGroupStore() defaultGroupStore}.
*
* @param group the Group to create/persist
* @return a new Group that may be used by this application.
* @throws ResourceException if the Application does not have a designated {@link #getDefaultGroupStore()
* defaultGroupStore} or if the designated {@code defaultGroupStore} does not allow new
* groups to be created.
* @since 0.9
*/
Group createGroup(Group group) throws ResourceException;
/**
* Creates a new Group that may be used by this application in the application's
* {@link #getDefaultGroupStore() defaultGroupStore}
*
* This is a convenience method. It merely delegates to the Application's designated
* {@link #getDefaultGroupStore() defaultGroupStore}.
* Example
*
* application.createGroup(Groups.newCreateRequestFor(group).build());
*
*
* If you would like to retrieve the group's custom data in the response of the groups creation.
*
* application.createGroup(Groups.newCreateRequestFor(group).withResponseOptions(Groups.options().withCustomData()).build());
*
*
* @param request the group creation request
* @return a new Group that may be used by this application.
* @throws ResourceException if the Application does not have a designated {@link #getDefaultGroupStore()
* defaultGroupsStore} or if the designated {@code defaultGroupsStore} does not allow new
* groups to be created.
* @since 0.9
*/
Group createGroup(CreateGroupRequest request);
/**
* Returns the application's parent (owning) Tenant.
*
* @return the application's parent (owning) Tenant.
*/
Tenant getTenant();
/**
* Sends a password reset email for the specified account email address. The email will contain
* a password reset link that the user can click or copy into their browser address bar.
*
* This method merely sends the password reset email that contains the link and nothing else. You will need to
* handle the link requests and then reset the account's password as described in the
* {@link #verifyPasswordResetToken(String)} JavaDoc.
*
* @param email an email address of an Account that may login to the application.
* @return the {@code PasswordResetToken} created for the password reset email sent to the specified {@code email}
* @see #verifyPasswordResetToken(String)
* @see #resetPassword(String, String)
* @throws ResourceException if there is no account that matches the specified email address
*/
PasswordResetToken sendPasswordResetEmail(String email) throws ResourceException;
/**
* Sends a password reset email to an account in the specified {@code AccountStore} matching the specified
* {@code email} address. If the email does not match an account in the specified AccountStore, a
* ResourceException will be thrown. If you are unsure of which of the application's mapped account stores might
* contain the account, use the more general
* {@link #sendPasswordResetEmail(String) sendPasswordResetEmail(String email)} method instead.
*
* This method is useful as a performance enhancement if the application might be mapped to many (dozens,
* hundreds or thousands) of account stores. This can be common in multi-tenant applications where each mapped
* AccountStore represents a specific tenant or customer organization. Specifying the AccountStore
* in these scenarios bypasses the general email-only-based account search and performs a more-efficient direct
* lookup directly against the specified AccountStore. The AccountStore is usually discovered before calling this
* method by inspecting a submitted tenant id or subdomain, e.g. http://ACCOUNT_STORE_NAME.foo.com
*
* Like the {@link #sendPasswordResetEmail(String)} method, this email merely sends the email that contains
* a link that, when clicked, will take the user to a view (web page) that allows them to specify a new password.
* When the new password is submitted, the {@link #verifyPasswordResetToken(String)} method is expected to be
* called at that time.
*
* @param email an email address of an Account that may login to the application.
* @param accountStore the accountStore expected to contain an account with the specified email address
* @return the {@code PasswordResetToken} created for the password reset email sent to the specified {@code email}
* @see #sendPasswordResetEmail(String)
* @see #verifyPasswordResetToken(String)
* @see #resetPassword(String, String)
* @throws ResourceException if the specified AccountStore is not mapped to this application or if the email address
* is not in the specified Account store
* @since 1.0.RC3
*/
PasswordResetToken sendPasswordResetEmail(String email, AccountStore accountStore) throws ResourceException;
/**
* Verifies a password reset token in a user-clicked link within an email.
*
* Base Link Configuration
* You need to define the Base link that will process HTTP requests when users click the link in the
* email as part of your Application's Workflow Configuration within the Stormpath UI Console. It must be a URL
* served by your application's web servers. For example:
*
* https://www.myApplication.com/passwordReset
*
* Runtime Link Processing
* When an application user clicks on the link in the email at runtime, your web server needs to process the
* request
* and look for an {@code spToken} request parameter. You can then verify the {@code spToken}, and then finally
* change the Account's password.
*
* Usage Example:
*
* Browser:
* {@code GET https://www.myApplication/passwordReset?spToken=someTokenValueHere}
*
* Your code:
*
* String token = httpServletRequest.getParameter("sptoken");
*
* Account account = application.verifyPasswordResetToken(token);
*
* //token has been verified - now set the new password with what the end-user submits:
* account.setPassword(user_submitted_new_password);
* account.save();
*
*
* @param token the verification token, usually obtained as a request parameter by your application.
* @return the Account matching the specified token.
* @since 0.4
*/
Account verifyPasswordResetToken(String token);
/**
* Verifies the password reset token (received in the user's email) and immediately changes the password in the
* same
* request (if the token is valid).
*
* NOTE: Once the token has been successfully used, it is immediately invalidated and can't be used again. If you
* need
* to change the password again, you will previously need to execute {@link #sendPasswordResetEmail(String)} again
* in order
* to obtain a new password reset token.
*
* @param passwordResetToken the verification token, usually obtained as a request parameter by your application.
* @param newPassword the new password that will be set to the Account if the token is successfully
* validated.
* @return the Account matching the specified token.
* @see #sendPasswordResetEmail(String)
* @since 1.0.RC
*/
Account resetPassword(String passwordResetToken, String newPassword);
/**
* Authenticates an account's submitted principals and credentials (e.g. username and password). The account must
* be in one of the Application's assigned {@link #getAccountStoreMappings() account stores}. If not
* in an assigned account store, the authentication attempt will fail.
* Example
* Consider the following username/password-based example:
*
*
* AuthenticationRequest request = UsernamePasswordRequest.builder()
* .setUsernameOrEmail(username)
* .setPassword(submittedRawPlaintextPassword)
* .build();
* Account authenticated = appToTest.authenticateAccount(request).getAccount();
*
* Additionally, the Account can be requested to be expanded to avoid a new network transfer when obtaining it:
*
*
* BasicAuthenticationOptions options = UsernamePasswordRequest.options().withAccount();
* AuthenticationRequest request = UsernamePasswordRequest.builder()
* .setUsernameOrEmail(username)
* .setPassword(submittedRawPlaintextPassword)
* .withResponseOptions(options)
* .build();
* Account authenticated = appToTest.authenticateAccount(request).getAccount();
*
*
* @param request the authentication request representing an account's principals and credentials (e.g.
* username/password) used to verify their identity.
* @return the result of the authentication. The authenticated account can be obtained from
* {@code result.}{@link com.stormpath.sdk.authc.AuthenticationResult#getAccount() getAccount()}.
* @throws ResourceException if the authentication attempt fails.
*/
AuthenticationResult authenticateAccount(AuthenticationRequest request) throws ResourceException;
/**
* Retrieves a Provider-based {@link Account}. The account must exist in one of the Provider-based {@link
* com.stormpath.sdk.directory.Directory Directories}
* assigned to the Application as an {@link #getAccountStoreMappings() account store}, the Directory must also be
* Enabled. If not
* in an assigned account store, the retrieval attempt will fail.
* Example
* Consider the following example:
*
*
* ProviderAccountRequest request = Providers.GOOGLE.account()
* .setCode("4/mV9k80PpUB7XK_2RvOqOkNrI7I8C.krFm0WYFM_sY3pEBd8D1tNHT8u6jiwI")
* .build();
* ProviderAccountResult result = application.getAccount(request);
* Account account = result.getAccount();
*
*
* @param request the {@link ProviderAccountRequest} representing the Provider-specific account access data (e.g.
* accessToken) used to verify the identity.
* @return the result of the access request. The {@link Account} can be obtained from
* {@code result.}{@link com.stormpath.sdk.provider.ProviderAccountResult#getAccount() getAccount()}.
* @throws ResourceException if the access attempt fails.
* @since 1.0.beta
*/
ProviderAccountResult getAccount(ProviderAccountRequest request);
/**
* Returns all ApplicationAccountStoreMappings accessible to the application.
*
* Tip: Instead of iterating over all accountStoreMappings, it might be more convenient (and practical) to execute
* a search for one or more accountStoreMappings using the {@link #getAccountStoreMappings(java.util.Map)} method
* or the {@link #getAccountStoreMappings(ApplicationAccountStoreMappingCriteria)} instead of this one.
*
* @return all ApplicationAccountStoreMappings accessible to the application.
* @see #getAccountStoreMappings(java.util.Map)
* @see #getAccountStoreMappings(ApplicationAccountStoreMappingCriteria)
* @since 0.9
*/
ApplicationAccountStoreMappingList getAccountStoreMappings();
/**
* Returns a paginated list of the application's mapped Account stores
* that also match the specified query criteria.
*
* Each {@code queryParams} key/value pair will be converted to String name to String value pairs and appended to
* the resource URL as query parameters, for example:
*
* .../applications/applicationId/accountStoreMappings?param1=value1¶m2=value2&...
*
*
* This is a type-unsafe alternative to the
* {@link #getAccountStoreMappings(ApplicationAccountStoreMappingCriteria) getAccountStoreMappings(accountStoreMappingCriteria)}
* method, and might be useful when using dynamic languages like Groovy or JRuby. Users of compiled languages,
* or those that like IDE-completion, might favor the type-safe method instead.
*
* @param queryParams the query parameters to use when performing a request to the collection.
* @return a paginated list of the application's mapped account stores that match the specified query criteria.
* @see #getAccountStoreMappings(ApplicationAccountStoreMappingCriteria)
* @since 0.9
*/
ApplicationAccountStoreMappingList getAccountStoreMappings(Map queryParams);
/**
* Returns a paginated list of the application's mapped Account stores that also match the specified query
* criteria.
* The {@link ApplicationAccountStoreMappings ApplicationAccountStoreMappings} utility class is available to help construct
* the criteria DSL. For example:
*
* application.getAccountStoreMappings(ApplicationAccountStoreMappings.criteria()
* .withAccountStore()
* .orderByListIndex();
*
* or, if using static imports:
*
* import static com.stormpath.sdk.application.ApplicationAccountStoreMappings.*;
*
* ...
*
* application.getAccountStoreMappings(criteria()
* .withAccountStore()
* .orderByListIndex();
*
*
* @param criteria the criteria to use when performing a request to the collection.
* @return a paginated list of the application's mapped account stores that match the specified query criteria.
* @since 1.0.RC9
*/
ApplicationAccountStoreMappingList getAccountStoreMappings(ApplicationAccountStoreMappingCriteria criteria);
/**
* Creates a new {@link com.stormpath.sdk.application.ApplicationAccountStoreMapping} for this Application, allowing the associated
* {@link ApplicationAccountStoreMapping#getAccountStore() accountStore} to be used as a source
* of accounts that may login to the Application.
*
* Usage Notice: Unlike other methods in this class that require the {@link #save()} method to be called to
* persist changes, this is a convenience method will call the server immediately.
* Authentication Process and ApplicationAccountStoreMapping Order
* During an authentication attempt, an Application consults its mapped account stores in iteration order,
* trying to find the first matching account to use for authentication. The lower the {@code ApplicationAccountStoreMapping}
* index (closer to zero), the earlier that store is consulted during authentication. If no matching account is
* found in an account store, the application will move on to the next {@code AccountStore} (next highest index)
* in the list. This continues either a matching account is found, or until all account stores are exhausted.
* When a matching account is found, the process is short-circuited and the discovered account will be used
* immediately for authentication.
*
* When calling this method, you control where the new {@code ApplicationAccountStoreMapping} will reside in the Application's
* overall list by setting its (zero-based)
* {@link ApplicationAccountStoreMapping#setListIndex(int) listIndex} property before calling this
* method.
* {@code listIndex} values
*
* - negative: attempting to set a negative {@code listIndex} will cause an Error
* - zero: the account store mapping will be the first item in the list (and therefore consulted first
* during the authentication process).
* - positive: the account store mapping will be inserted at that index. Because list indices are zero-based,
* the account store will be in the list at position {@code listIndex - 1}.
*
* Any {@code listIndex} value equal to or greater than the current list size will automatically append the
* {@code ApplicationAccountStoreMapping} at the end of the list.
* Example
* Setting a new {@code ApplicationAccountStoreMapping}'s {@code listIndex} to {@code 500} and then adding the mapping to
* an application with an existing 3-item list will automatically save the {@code ApplicationAccountStoreMapping} at the end
* of the list and set its {@code listIndex} value to {@code 3} (items at index 0, 1, 2 were the original items,
* the new fourth item will be at index 3).
*
* AccountStore directoryOrGroup = getDirectoryOrGroupYouWantToUseForLogin();
* ApplicationAccountStoreMapping mapping = client.instantiate(ApplicationAccountStoreMapping.class);
* mapping.setAccountStore(directoryOrGroup);
* mapping.setListIndex(3); //this is zero-based, so index 3 == 4th item
* mapping = application.createAccountStoreMapping(mapping);
*
* Then, when {@link #authenticateAccount(com.stormpath.sdk.authc.AuthenticationRequest) authenticating} an
* account, this AccountStore (directory or group) will be consulted if no others before it in the list
* found a matching account.
* New Account Storage
* If {@link #createAccount }
*
* @param mapping the new ApplicationAccountStoreMapping resource to add to the Application's ApplicationAccountStoreMapping list.
* @return the newly created ApplicationAccountStoreMapping instance.
* @throws ResourceException
* @since 0.9
*/
ApplicationAccountStoreMapping createAccountStoreMapping(ApplicationAccountStoreMapping mapping) throws ResourceException;
/**
* Creates a new {@link ApplicationAccountStoreMapping} for this Application and appends that
* ApplicationAccountStoreMapping to the end of the Application's ApplicationAccountStoreMapping list, allowing the associated
* {@link ApplicationAccountStoreMapping#getAccountStore() accountStore} to be used as a source
* of accounts that may login to the Application.
*
* Usage Notice: Unlike other methods in this class that require the {@link #save()} method to be called to
* persist changes, this is a convenience method will call the server immediately.
* Authentication Process and ApplicationAccountStoreMapping Order
* During an authentication attempt, an Application consults its mapped account stores in iteration order,
* trying to find the first matching account to use for authentication. The lower the {@code ApplicationAccountStoreMapping}
* index (closer to zero), the earlier that store is consulted during authentication. If no matching account is
* found in an account store, the application will move on to the next {@code AccountStore} (next highest index)
* in the list. This continues either a matching account is found, or until all account stores are exhausted.
* When a matching account is found, the process is short-circuited and the discovered account will be used
* immediately for authentication.
*
* When calling this method, you are setting the new {@code ApplicationAccountStoreMapping} to the end of the Application's
* overall list.
*
* NOTE: If you already know the account store where the account resides, you can
* specify it at the time the authentication request is created (for example,
* {@link UsernamePasswordRequestBuilder#inAccountStore(AccountStore)}).
* This way you will be avoiding the authentication attempt to cycle through the Application's account stores.
*
* Example
*
* AccountStore directoryGroupOrOrganization = getDirectoryGroupOrOrganizationYouWantToUseForLogin();
* ApplicationAccountStoreMapping mapping = application.addAccountStore(directoryGroupOrOrganization);
*
* Then, when {@link #authenticateAccount(com.stormpath.sdk.authc.AuthenticationRequest) authenticating} an
* account, this AccountStore (directory, organization or group) will be consulted if no others before it in the list
* found a matching account.
*
* @param accountStore the new AccountStore resource to add to the Application's ApplicationAccountStoreMapping list.
* @return the newly created ApplicationAccountStoreMapping instance.
* @throws ResourceException
* @since 0.9
*/
ApplicationAccountStoreMapping addAccountStore(AccountStore accountStore) throws ResourceException;
/**
* Gets an {@link ApiKey}, by its id, that belongs to an {@link Account} that has access to this application by a
* mapped account store.
*
*
* @param id the id of the {@link ApiKey} to be retrieved.
* @return an {@link ApiKey}, by its id, that belongs to an {@link Account} that has access to this application by
* a
* mapped account store.
* @throws ResourceException when the ApiKey does not belong to the Account or the ApiKey does not exist.
* @throws IllegalArgumentException if the {@code id} argument is null or empty.
* @since 1.0.RC
*/
ApiKey getApiKey(String id) throws ResourceException, IllegalArgumentException;
/**
* Gets an {@link ApiKey}, by its id, that belongs to an {@link Account} that has access to this application by a
* mapped account store.
*
* A call to this method ensures that the returned {@link ApiKey} response reflects the specified {@link
* ApiKeyOptions}.
*
*
* @param id the id of the {@link ApiKey} to be retrieved.
* @param options the {@link ApiKeyOptions} to use to customize the ApiKey resource upon retrieval.
* @return an {@link ApiKey}, by its id, that belongs to an {@link Account} that has access to this application by
* a
* mapped account store
* with the specified {@link ApiKeyOptions}.
* @throws ResourceException when the ApiKey does not belong to the Account or the ApiKey does not exist.
* @throws IllegalArgumentException if the {@code id} argument is null or empty, or if the {@code options} argument
* is null..
* @since 1.0.RC
*/
ApiKey getApiKey(String id, ApiKeyOptions options) throws ResourceException, IllegalArgumentException;
/**
* Creates a new {@link IdSiteUrlBuilder} that allows you to build a URL you can use to redirect your
* application users to a hosted login/registration/forgot-password site - what Stormpath
* calls an 'Identity Site' (or 'ID Site' for short) - for performing common user identity functionality. When
* the user is done (logging in, registering, etc), they will be redirected back to a {@code callbackUri} of
* your choice.
*
* This method is a complement to the {@link #newIdSiteCallbackHandler(Object)} method: you use this
* {@code newIdSiteUrlBuilder} method to send the end-user to your ID Site. When the end-user is finished on the ID
* Site and they are returned to your application, you use the {@link #newIdSiteCallbackHandler(Object)} method to
* process the result.
*
* Example
*
* Let's assume your application's end-users use a web browser to visit your web application at
* {@code https://awesomeapp.com}. When they login, you want to send them to something like
* {@code https://my.awesomeapp.com} or {@code https://id.awesomeapp.com} so you don't have to build all the
* login, registration, and forgot password screens from scratch.
*
* When your end-user clicks a 'login' link, you would redirect them to your ID Site. That link click request
* might be handled as follows:
*
*
* public void onLoginLinkClick(HttpServletRequest request, HttpServletResponse response) {
*
* Application application = client.getResource(myApplicationRestUrl, Application.class);
*
* //this is the fully qualified URL that your end-user should return to after they are finished at the
* // ID Site. It is usually a URL in your web application, for example: https://awesomeapp.com/id
* // For security reasons, the callbackUri must equal a registered URI in the Stormpath Administration console
* String callbackUri = "https://awesomeapp.com/id";
*
* String redirectUrl = application.newIdSiteUrlBuilder().{@link IdSiteUrlBuilder#setCallbackUri(String)
* setCallbackUri}(callbackUri).build();
*
* response.setHeader("Cache-Control", "no-store, no-cache, must-revalidate");
* response.addHeader("Cache-Control", "post-check=0, pre-check=0");
* response.setHeader("Pragma", "no-cache");
*
* //send a 302 redirect to your ID Site. When they're done, they will return to your callbackUri:
* response.sendRedirect(redirectUrl);
* }
*
*
* When the end-user is done using your ID Site, they will be redirected back to your specified
* {@code callbackUri}. Requests submitted to your {@code callbackUri} should be handled via the
* {@link #newIdSiteCallbackHandler(Object)} method.
*
*
*
* @return a new {@link IdSiteUrlBuilder} that allows you to build a URL you can use to redirect your
* application users to a hosted login/registration/forgot-password 'ID Site'.
* @see IdSiteUrlBuilder#setCallbackUri(String)
* @see IdSiteUrlBuilder#setPath(String)
* @see IdSiteUrlBuilder#setState(String)
* @since 1.0.RC2
*/
IdSiteUrlBuilder newIdSiteUrlBuilder();
/**
* Creates a new {@link SamlIdpUrlBuilder} that allows you to build a URL you can use to redirect your
* application users to a SAML authentication site (Identity Provider or IdP) for performing common user identity functionality. When
* users are done (logging in, logging out, etc), they will be redirected back to a {@code callbackUri} of
* your choice.
*
* Example
*
* Let's assume your application's end-users use a web browser to visit your web application at
* {@code https://awesomeapp.com}. When they login, you want to send them to something like
* {@code https://awesomeapp.com/userHome} so you don't have to build all the
* login, registration, and forgot password screens from scratch.
*
* When your end-user clicks a 'login' link, you would redirect them to your SAML IdP page. That link click request
* might be handled as follows:
*
*
* public void onLoginLinkClick(HttpServletRequest request, HttpServletResponse response) {
*
* Application application = client.getResource(myApplicationRestUrl, Application.class);
*
* // This is the fully qualified URL that your end-user should return to after they are finished at the
* // SAML IdP Site. It is usually a URL in your web application, for example: https://my.awesomeapp.com
*
* String callbackUri = "https://awesomeapp.com/userHome";
* String redirectUrl = application.newSamlIdpUrlBuilder().{@link SamlIdpUrlBuilder#setCallbackUri(String)} setCallbackUri}(callbackUri).build();
*
* response.setHeader("Cache-control", "no-cache, no-store");
* response.setHeader("Pragma", "no-cache");
*
* //send a 302 redirect to your SAML IdP. When they're done, they will return to your callbackUri:
* response.sendRedirect(redirectUrl);
* }
*
*
* When the end-user is done using your ID Site, he will be redirected back to your specified
* {@code callbackUri}. Requests submitted to your {@code callbackUri} should be handled via the
* {@link #newSamlCallbackHandler(Object)} method.
*
* @return a new {@link SamlIdpUrlBuilder} that allows you to build a URL you can use to redirect your
* application users to a SAML authentication site (Identity Provider or IdP).
*
* @see SamlIdpUrlBuilder#setCallbackUri(String)
*
* @since 1.0.RC8
*/
SamlIdpUrlBuilder newSamlIdpUrlBuilder();
/**
* Creates a new {@link IdSiteCallbackHandler} used to handle HTTP replies from your ID Site to your
* application's {@code callbackUri}, as described in the {@link #newIdSiteUrlBuilder()} method.
*
* This method should be called when processing an HTTP request sent by the ID Site to the
* {@code callbackUri} specified via the {@link #newIdSiteUrlBuilder()} method.
*
* Example
*
* Assume that you previously {@link #newIdSiteUrlBuilder()}, built the URL, and redirected your end-user to
* that URL. When the end-user is finished interacting with your ID Site, they will be redirected back to the
* {@code callbackUri} you specified when constructing the URL. You would call this method when processing the
* request to that {@code callbackUri}.
*
* For example, assume your callbackUri is {@code https://awesomeapp.com/id} and you process requests to that
* URI with a (sample) {@code onIdSiteCallback} method below:
*
*
* public void onIdSiteCallback(HttpServletRequest request, HttpServletResponse response) {
*
* Application application = client.getResource(myApplicationRestUrl, Application.class);
*
* AccountResult result = application.newIdSiteCallbackHandler(request).getAccountResult();
*
* //get the account that signed-up or logged in successfully:
* Account account = result.getAccount();
*
* //do whatever you want with the returned account :)
*
* // result.isNewAccount() == true for a newly registered user
* // result.isNewAccount() == false for an existing user that logged in
*
* // When you're done, you might want to redirect the end-user to a welcome page or
* // a 'my account' page, for example:
* response.sendRedirect("/myaccount");
* }
*
*
* Servlet Container or No Servlet Container?
*
* This method will accept either a {@code javax.servlet.http.HttpServletRequest} instance if your app is running
* in a Servlet container, or a manually-constructed {@link com.stormpath.sdk.http.HttpRequest} instance if it is
* not. See the {@link com.stormpath.sdk.http.HttpRequests} helper class to help build the request object if you
* are running in a non-servlet environment.
*
* @param httpRequest either an {@code javax.servlet.http.HttpServletRequest} instance (if your app runs in a
* Servlet container) or a manually-constructed {@link com.stormpath.sdk.http.HttpRequest}
* instance if it does not.
* @return an {@link IdSiteCallbackHandler} that allows you customize how the {@code httpRequest} will be handled.
* @throws IllegalArgumentException if the method argument is null or is not either a either a
*
* {@code javax.servlet.http.HttpServletRequest} or
* {@link com.stormpath.sdk.http.HttpRequest} instance.
* @see #newIdSiteUrlBuilder()
* @see com.stormpath.sdk.http.HttpRequests
* @see com.stormpath.sdk.idsite.IdSiteCallbackHandler
* @see com.stormpath.sdk.idsite.IdSiteCallbackHandler#getAccountResult()
*
* @since 1.0.RC2
*/
IdSiteCallbackHandler newIdSiteCallbackHandler(Object httpRequest);
/**
* Creates a new {@link SamlCallbackHandler} used to handle HTTP replies from your SAML Identity Provider (SAML IdP) to your
* application's {@code callbackUri}, as described in the {@link #newSamlIdpUrlBuilder()} method.
*
* This method should be called when processing an HTTP request sent by the SAML IdP to the
* {@code callbackUri} specified via the {@link #newSamlIdpUrlBuilder()} method.
*
* Example
*
* Assume that you previously built the URL using the {@link #newSamlIdpUrlBuilder()}, and redirected your end-user to
* that URL. When the end-user is finished interacting with your SAML IdP Site, they will be redirected back to the
* {@code callbackUri} you specified when constructing the URL. You would call this method when processing the
* request to that {@code callbackUri}.
*
* For example, assume your callbackUri is {@code https://awesomeapp.com/userHome} and you process requests to that
* URI with a (sample) {@code onSamlIdpCallback} method below:
*
*
* public void onSamlIdpCallback(HttpServletRequest request, HttpServletResponse response) {
*
* Application application = client.getResource(myApplicationRestUrl, Application.class);
*
* AccountResult result = application.newSamlCallbackHandler(request).getAccountResult();
*
* //get the account that signed-up or logged in successfully:
* Account account = result.getAccount();
*
* }
*
*
* Servlet Container or No Servlet Container?
*
* This method will accept either a {@code javax.servlet.http.HttpServletRequest} instance if your app is running
* in a Servlet container, or a manually-constructed {@link com.stormpath.sdk.http.HttpRequest} instance if it is
* not. See the {@link com.stormpath.sdk.http.HttpRequests} helper class to help build the request object if you
* are running in a non-servlet environment.
*
* @param httpRequest either an {@code javax.servlet.http.HttpServletRequest} instance (if your app runs in a
* Servlet container) or a manually-constructed {@link com.stormpath.sdk.http.HttpRequest}
* instance if it does not.
* @return an {@link SamlCallbackHandler} that allows you customize how the {@code httpRequest} will be handled.
* @throws IllegalArgumentException if the method argument is null or is not either a either a
*
* {@code javax.servlet.http.HttpServletRequest} or
* {@link com.stormpath.sdk.http.HttpRequest} instance.
* @see #newSamlIdpUrlBuilder()
* @see com.stormpath.sdk.http.HttpRequests
* @see com.stormpath.sdk.idsite.IdSiteCallbackHandler
* @see com.stormpath.sdk.idsite.IdSiteCallbackHandler#getAccountResult()
*
* @since 1.0.RC8
*/
SamlCallbackHandler newSamlCallbackHandler(Object httpRequest);
/**
* Triggers the delivery of a new verification email for the specified account.
*
* This method is useful in scenarios where the
* Account Registration and Verification workflow is enabled. If the welcome email has not been received by
* a newly registered account, then the user will not be able to login until the account is verified.
*
* This method re-sends the verification email and allows the user to verify the account.
*
* The {@link com.stormpath.sdk.account.VerificationEmailRequest VerificationEmailRequest} resource must contain the email or the
* username identifying the account. If the optional {@link com.stormpath.sdk.directory.AccountStore AccountStore} is
* also specified, the desired Account will be sought only in that specific AccountStore.
* Sample code:
*
*
* Directory dir = client.getResource("https://api.stormpath.com/v1/directories/7WcyHGlDa0V2Nk11Vum3Zd", Directory.class);
* VerificationEmailRequest verificationEmailRequest = Applications.verificationEmailBuilder()
* .setLogin("[email protected]")
* .setAccountStore(dir)
* .build();
* application.sendVerificationEmail(verificationEmailRequest);
*
*
* @param verificationEmailRequest contains the required information for the verification email to be sent.
* @since 1.0.0
*/
public void sendVerificationEmail(VerificationEmailRequest verificationEmailRequest);
/**
* Convenience method to add a a new {@link AccountStore} to this application.
*
* The given String can be either an 'href' or a 'name' of a {@link Directory} or a {@link Group} belonging to the current Tenant.
*
* If the provided value is an 'href', this method will get the proper Resource and add it as a new AccountStore in this
* Application without much effort. However, if the provided value is not an 'href', it will be considered as a 'name'. In this case,
* this method will search for both a Directory and a Group whose names equal the provided hrefOrName. If only
* one resource exists (either a Directory or a Group), then it will be added as a new AccountStore in this Application. However,
* if there are two resources (a Directory and a Group) matching that name, a {@link com.stormpath.sdk.resource.ResourceException ResourceException}
* will be thrown.
*
* At the end of this process, if a single matching resource is found, this method will then delegate the actual {@link ApplicationAccountStoreMapping}
* creation to the {@link #addAccountStore(AccountStore)} method in order to fulfill its task.
*
* Example providing an href:
*
*
* ApplicationAccountStoreMapping accountStoreMapping = application.addAccountStore("https://api.stormpath.com/v1/groups/2rwq022yMt4u2DwKLfzriP");
*
* Example providing a name:
*
*
* ApplicationAccountStoreMapping accountStoreMapping = application.addAccountStore("Foo Name");
*
* USAGE NOTE 1: When using 'names' this method is not efficient as it will search for both Directories and Groups within this Tenant
* for a matching name. In order to do so, some looping takes place at the client side: groups exist within directories, therefore we need
* to loop through every existing directory in order to find the required Group. In contrast, providing the Group's 'href' is much more
* efficient as no actual search operation needs to be carried out.
*
* USAGE NOTE 2: Unlike other methods in this class that require the {@link #save()} method to be called to
* persist changes, this is a convenience method and will call the server immediately.
*
* @param hrefOrName either the 'href' or the 'name' of the desired Directory or Group.
* @return the {@link ApplicationAccountStoreMapping} created after finding the actual resource described by hrefOrName. It returns
* null if there is no group or directory matching the href or name given.
* @throws ResourceException if the resource already exists as an account store in this application.
* @throws IllegalArgumentException if the given hrefOrName matches more than one resource in the current Tenant.
* @see #addAccountStore(com.stormpath.sdk.directory.DirectoryCriteria)
* @see #addAccountStore(com.stormpath.sdk.group.GroupCriteria)
* @since 1.0.RC3
*/
ApplicationAccountStoreMapping addAccountStore(String hrefOrName);
/**
* Convenience method to add a new {@link Directory} as an {@link AccountStore} to this application.
*
* The provided {@link DirectoryCriteria} must match a single {@link Directory} in the current Tenant. If more than one
* Directory matches the criteria, an {@link IllegalArgumentException} will be thrown. If no Directory matches the criteria,
* this method will return null.
*
* When a single Directory is found, this method will then delegate the actual {@link ApplicationAccountStoreMapping} creation
* to the {@link #addAccountStore(AccountStore)} method in order to fulfill its task.
*
* Example:
*
*
* DirectoryCriteria criteria = Directories.criteria().add(Directories.name().eqIgnoreCase("Foo Dir Name"));
* ApplicationAccountStoreMapping accountStoreMapping = application.addAccountStore(criteria);
*
*
* USAGE NOTE 1: Unlike other methods in this class that require the {@link #save()} method to be called to
* persist changes, this is a convenience method and will call the server immediately.
*
* @param criteria to search for the desired {@link Directory} to be added as an {@link AccountStore}.
* @return the {@link ApplicationAccountStoreMapping} created after finding the actual resource matching the criteria. It returns
* null if there is no Directory matching the criteria.
* @throws ResourceException if the found {@link Directory} already exists as an account store in this application.
* @throws IllegalArgumentException if the criteria matches more than one Group in the current Tenant.
* @since 1.0.RC3
*/
ApplicationAccountStoreMapping addAccountStore(DirectoryCriteria criteria);
/**
* Convenience method to add a new {@link Organization} as an {@link AccountStore} to this application.
*
* The provided {@link OrganizationCriteria} must match a single {@link Organization} in the current Tenant. If more than one
* Organization matches the criteria, an {@link IllegalArgumentException} will be thrown. If no Organization matches the criteria,
* this method will return null.
*
* When a single Organization is found, this method will then delegate the actual {@link ApplicationAccountStoreMapping} creation
* to the {@link #addAccountStore(AccountStore)} method in order to fulfill its task.
*
* Example:
*
*
* OrganizationCriteria criteria = Organizations.criteria().add(Organizations.name().eqIgnoreCase("Org Name"));
* ApplicationAccountStoreMapping accountStoreMapping = application.addAccountStore(criteria);
*
*
* USAGE NOTE 1: Unlike other methods in this class that require the {@link #save()} method to be called to
* persist changes, this is a convenience method and will call the server immediately.
*
* @param criteria to search for the desired {@link Organization} to be added as an {@link AccountStore}.
* @return the {@link ApplicationAccountStoreMapping} created after finding the actual resource matching the criteria. It returns
* null if there is no Organization matching the criteria.
* @throws ResourceException if the found {@link Organization} already exists as an account store in this application.
* @throws IllegalArgumentException if the criteria matches more than one Organization in the current Tenant.
* @since 1.0.RC7
*/
ApplicationAccountStoreMapping addAccountStore(OrganizationCriteria criteria);
/**
* Convenience method to add a new {@link Group} as an {@link AccountStore} to this application.
*
* The provided {@link GroupCriteria} must match a single {@link Group} in the current Tenant. If more than one
* Group matches the criteria, an {@link IllegalArgumentException} will be thrown. If no Group matches the criteria,
* this method will return null.
*
* When a single Group is found, this method will then delegate the actual {@link ApplicationAccountStoreMapping} creation
* to the {@link #addAccountStore(AccountStore)} method in order to fulfill its task.
*
* Example:
*
*
* GroupCriteria criteria = Groups.criteria().add(Groups.name().containsIgnoreCase("Foo Group Name"));
* ApplicationAccountStoreMapping accountStoreMapping = application.addAccountStore(criteria);
*
*
* USAGE NOTE 1: This method is not efficient as it will search for every Group within every Directory of this Tenant.
* In order to do so, some looping takes place at the client side: groups exist within directories, therefore we need to loop through every
* existing directory in order to find the required group. In contrast, if the Group's 'href' is already known, we suggest using
* {@link #addAccountStore(String)} with the Group's 'href' since it is a more efficient mechanism where no actual search
* needs to be carried out.
*
* USAGE NOTE 2: Unlike other methods in this class that require the {@link #save()} method to be called to
* persist changes, this is a convenience method and will call the server immediately.
*
* @param criteria to search for the desired {@link Group} to be added as an {@link AccountStore}.
* @return the {@link ApplicationAccountStoreMapping} created after finding the actual resource matching the criteria. It returns
* null if there is no Group matching the criteria.
* @throws ResourceException if the found {@link Group} already exists as an account store in this application.
* @throws IllegalArgumentException if the criteria matches more than one Group in the current Tenant.
* @see #addAccountStore(String)
* @since 1.0.RC3
*/
ApplicationAccountStoreMapping addAccountStore(GroupCriteria criteria);
/**
* Saves this {@link Application} resource and ensures the returned {@link Application} response reflects the specified options. This
* enhances performance by 'piggybacking' the response to return related resources you know you will use after
* saving the application.
*
* @param responseOptions The {@code ApplicationOptions} to use to customize the Application resource returned in the save response.
* @return this instance for method chaining.
* @since 1.0.RC4.6
*/
Application saveWithResponseOptions(ApplicationOptions responseOptions);
/**
* Returns the {@link com.stormpath.sdk.oauth.OAuthPolicy} associated with this application.
* @return the {@link com.stormpath.sdk.oauth.OAuthPolicy} associated with this application.
*
* @since 1.0.RC7
*/
OAuthPolicy getOAuthPolicy();
/**
* Returns the {@link SamlPolicy} associated with this application.
* @return the {@link SamlPolicy} associated with this application.
*
* @since 1.0.RC8
*/
SamlPolicy getSamlPolicy();
/**
* Returns the {@link ApplicationWebConfig} associated with this application.
*
* @return the {@link ApplicationWebConfig} associated with this application.
* @since 1.2.0
*/
ApplicationWebConfig getWebConfig();
/**
* Returns the valid list of Valid Callback URIs for this application.
* @return the list of String valid callback URIs for this application.
*
* @since 1.0.RC8
*/
List getAuthorizedCallbackUris();
/**
* Sets the list of Authorized Callback URIs for this application.
* @return this instance for method chaining.
*
* @since 1.0.RC8
*/
Application setAuthorizedCallbackUris(List authorizedCallbackUris);
/**
* Adds a valid URI as an authorized callback URI for this application.
* This is a convenience method and using it is equivalent to:
*
* setAuthorizedCallbackUris(getAuthorizedCallbackUris().add(authorizedCallbackUri));
*
*
* @return this instance for method chaining.
* @see #setAuthorizedCallbackUris(java.util.List)
*
* @since 1.0.RC8
*/
Application addAuthorizedCallbackUri(String authorizedCallbackUri);
/**
* Returns the valid list of Valid Origin URIs for this application.
* @return the list of String valid Origin URIs for this application.
*
* @since 1.2.0
*/
List getAuthorizedOriginUris();
/**
* Sets the list of Authorized Origin URIs for this application.
* @return this instance for method chaining.
*
* @since 1.2.0
*/
Application setAuthorizedOriginUris(List authorizedOriginUris);
/**
* Adds a valid URI as an authorized origin URI for this application.
* This is a convenience method and using it is equivalent to:
*
* setAuthorizedOriginUris(getAuthorizedOriginUris().add(authorizedOriginUri));
*
*
* @return this instance for method chaining.
* @see #setAuthorizedCallbackUris(java.util.List)
*
* @since 1.2.0
*/
Application addAuthorizedOriginUri(String authorizedOriginUri);
/**
* Added to support Okta Migration, configures underling object with property map.
* @return this instance for method chaining.
*/
Application configureWithProperties(Map properties);
}
© 2015 - 2025 Weber Informatics LLC | Privacy Policy