org.apache.tomcat.util.threads.ThreadPool Maven / Gradle / Ivy
The newest version!
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 1997-2010 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*
*
* This file incorporates work covered by the following copyright and
* permission notice:
*
* Copyright 2004 The Apache Software Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.tomcat.util.threads;
import java.util.*;
import com.sun.org.apache.commons.logging.Log;
import com.sun.org.apache.commons.logging.LogFactory;
import org.apache.tomcat.util.res.StringManager;
/**
* A thread pool that is trying to copy the apache process management.
*
* @author Gal Shachor
*/
public class ThreadPool {
private static Log log = LogFactory.getLog(ThreadPool.class);
private static StringManager sm =
StringManager.getManager("org.apache.tomcat.util.threads.res");
private static boolean logfull=true;
/*
* Default values ...
*/
public static final int MAX_THREADS = 200;
public static final int MAX_THREADS_MIN = 10;
public static final int MAX_SPARE_THREADS = 50;
public static final int MIN_SPARE_THREADS = 4;
public static final int WORK_WAIT_TIMEOUT = 60*1000;
/*
* Where the threads are held.
*/
protected ControlRunnable[] pool = null;
/*
* A monitor thread that monitors the pool for idel threads.
*/
protected MonitorRunnable monitor;
/*
* Max number of threads that you can open in the pool.
*/
protected int maxThreads;
/*
* Min number of idel threads that you can leave in the pool.
*/
protected int minSpareThreads;
/*
* Max number of idel threads that you can leave in the pool.
*/
protected int maxSpareThreads;
/*
* Number of threads in the pool.
*/
protected int currentThreadCount;
/*
* Number of busy threads in the pool.
*/
protected int currentThreadsBusy;
/*
* Flag that the pool should terminate all the threads and stop.
*/
protected boolean stopThePool;
/* Flag to control if the main thread is 'daemon' */
protected boolean isDaemon=true;
/** The threads that are part of the pool.
* Key is Thread, value is the ControlRunnable
*/
protected Hashtable threads=new Hashtable();
protected Vector listeners=new Vector();
/** Name of the threadpool
*/
protected String name = "TP";
/**
* Sequence.
*/
protected int sequence = 1;
/**
* Constructor.
*/
public ThreadPool() {
maxThreads = MAX_THREADS;
maxSpareThreads = MAX_SPARE_THREADS;
minSpareThreads = MIN_SPARE_THREADS;
currentThreadCount = 0;
currentThreadsBusy = 0;
stopThePool = false;
}
/** Create a ThreadPool instance.
*
* @param jmx True if you want a pool with JMX support. A regular pool
* will be returned if JMX or the modeler are not available.
*
* @return ThreadPool instance. If JMX support is requested, you need to
* call register() in order to set a name.
*/
public static ThreadPool createThreadPool(boolean jmx) {
// if( jmx ) {
// try {
// Class.forName( "com.sun.org.apache.commons.modeler.Registry");
// Class tpc=Class.forName( "org.apache.tomcat.util.threads.ThreadPoolMX");
// ThreadPool res=(ThreadPool)tpc.newInstance();
// return res;
// } catch( Exception ex ) {
// }
// }
return new ThreadPool();
}
public synchronized void start() {
stopThePool=false;
currentThreadCount = 0;
currentThreadsBusy = 0;
adjustLimits();
pool = new ControlRunnable[maxThreads];
openThreads(minSpareThreads);
monitor = new MonitorRunnable(this);
if (maxSpareThreads < maxThreads) {
monitor = new MonitorRunnable(this);
}
}
public MonitorRunnable getMonitor() {
return monitor;
}
public void setMaxThreads(int maxThreads) {
this.maxThreads = maxThreads;
}
public int getMaxThreads() {
return maxThreads;
}
public void setMinSpareThreads(int minSpareThreads) {
this.minSpareThreads = minSpareThreads;
}
public int getMinSpareThreads() {
return minSpareThreads;
}
public void setMaxSpareThreads(int maxSpareThreads) {
this.maxSpareThreads = maxSpareThreads;
}
public int getMaxSpareThreads() {
return maxSpareThreads;
}
public int getCurrentThreadCount() {
return currentThreadCount;
}
public int getCurrentThreadsBusy() {
return currentThreadsBusy;
}
public boolean isDaemon() {
return isDaemon;
}
public static int getDebug() {
return 0;
}
/** The default is true - the created threads will be
* in daemon mode. If set to false, the control thread
* will not be daemon - and will keep the process alive.
*/
public void setDaemon( boolean b ) {
isDaemon=b;
}
public boolean getDaemon() {
return isDaemon;
}
public void setName(String name) {
this.name = name;
}
public String getName() {
return name;
}
public int getSequence() {
return sequence++;
}
public void addThread( Thread t, ControlRunnable cr ) {
threads.put( t, cr );
for( int i=0; i maxSpareThreads) {
int toFree = currentThreadCount -
currentThreadsBusy -
maxSpareThreads;
for(int i = 0 ; i < toFree ; i++) {
ControlRunnable c = pool[currentThreadCount - currentThreadsBusy - 1];
c.terminate();
pool[currentThreadCount - currentThreadsBusy - 1] = null;
currentThreadCount --;
}
}
}
/**
* Returns the thread to the pool.
* Called by threads as they are becoming idel.
*/
protected synchronized void returnController(ControlRunnable c) {
if(0 == currentThreadCount || stopThePool) {
c.terminate();
return;
}
// atomic
currentThreadsBusy--;
pool[currentThreadCount - currentThreadsBusy - 1] = c;
notify();
}
/**
* Inform the pool that the specific thread finish.
*
* Called by the ControlRunnable.run() when the runnable
* throws an exception.
*/
protected synchronized void notifyThreadEnd(ControlRunnable c) {
currentThreadsBusy--;
currentThreadCount --;
notify();
}
/*
* Checks for problematic configuration and fix it.
* The fix provides reasonable settings for a single CPU
* with medium load.
*/
protected void adjustLimits() {
if(maxThreads <= 0) {
maxThreads = MAX_THREADS;
} else if (maxThreads < MAX_THREADS_MIN) {
log.warn(sm.getString("threadpool.max_threads_too_low",
Integer.valueOf(maxThreads),
Integer.valueOf(MAX_THREADS_MIN)));
maxThreads = MAX_THREADS_MIN;
}
if(maxSpareThreads >= maxThreads) {
maxSpareThreads = maxThreads;
}
if(maxSpareThreads <= 0) {
if(1 == maxThreads) {
maxSpareThreads = 1;
} else {
maxSpareThreads = maxThreads/2;
}
}
if(minSpareThreads > maxSpareThreads) {
minSpareThreads = maxSpareThreads;
}
if(minSpareThreads <= 0) {
if(1 == maxSpareThreads) {
minSpareThreads = 1;
} else {
minSpareThreads = maxSpareThreads/2;
}
}
}
/** Create missing threads.
*
* @param toOpen Total number of threads we'll have open
*/
protected void openThreads(int toOpen) {
if(toOpen > maxThreads) {
toOpen = maxThreads;
}
for(int i = currentThreadCount ; i < toOpen ; i++) {
pool[i - currentThreadsBusy] = new ControlRunnable(this);
}
currentThreadCount = toOpen;
}
/** @deprecated */
void log( String s ) {
log.info(s);
//loghelper.flush();
}
/**
* Periodically execute an action - cleanup in this case
*/
public static class MonitorRunnable implements Runnable {
ThreadPool p;
Thread t;
int interval=WORK_WAIT_TIMEOUT;
boolean shouldTerminate;
MonitorRunnable(ThreadPool p) {
this.p=p;
this.start();
}
public void start() {
shouldTerminate = false;
t = new Thread(this);
t.setDaemon(p.getDaemon() );
t.setName(p.getName() + "-Monitor");
t.start();
}
public void setInterval(int i ) {
this.interval=i;
}
public void run() {
while(true) {
try {
// Sleep for a while.
synchronized(this) {
this.wait(WORK_WAIT_TIMEOUT);
}
// Check if should terminate.
// termination happens when the pool is shutting down.
if(shouldTerminate) {
break;
}
// Harvest idle threads.
p.checkSpareControllers();
} catch(Throwable t) {
ThreadPool.log.error("Unexpected exception", t);
}
}
}
public void stop() {
this.terminate();
}
/** Stop the monitor
*/
public synchronized void terminate() {
shouldTerminate = true;
this.notify();
}
}
/**
* A Thread object that executes various actions ( ThreadPoolRunnable )
* under control of ThreadPool
*/
public static class ControlRunnable implements Runnable {
/**
* ThreadPool where this thread will be returned
*/
private ThreadPool p;
/**
* The thread that executes the actions
*/
private ThreadWithAttributes t;
/**
* The method that is executed in this thread
*/
private ThreadPoolRunnable toRun;
private Runnable toRunRunnable;
/**
* Stop this thread
*/
private boolean shouldTerminate;
/**
* Activate the execution of the action
*/
private boolean shouldRun;
/**
* Per thread data - can be used only if all actions are
* of the same type.
* A better mechanism is possible ( that would allow association of
* thread data with action type ), but right now it's enough.
*/
private boolean noThData;
/**
* Start a new thread, with no method in it
*/
ControlRunnable(ThreadPool p) {
toRun = null;
shouldTerminate = false;
shouldRun = false;
this.p = p;
t = new ThreadWithAttributes(p, this);
t.setDaemon(true);
t.setName(p.getName() + "-Processor" + p.getSequence());
p.addThread( t, this );
noThData=true;
t.start();
}
public void run() {
boolean _shouldRun = false;
boolean _shouldTerminate = false;
ThreadPoolRunnable _toRun = null;
try {
while(true) {
try {
/* Wait for work. */
synchronized(this) {
while (!shouldRun && !shouldTerminate) {
this.wait();
}
_shouldRun = shouldRun;
_shouldTerminate = shouldTerminate;
_toRun = toRun;
}
if( _shouldTerminate ) {
if( p.log.isDebugEnabled())
p.log.debug( "Terminate");
break;
}
/* Check if should execute a runnable. */
try {
if(noThData) {
if( _toRun != null ) {
Object thData[]=_toRun.getInitData();
t.setThreadData(p, thData);
if(p.log.isDebugEnabled())
p.log.debug( "Getting new thread data");
}
noThData = false;
}
if(_shouldRun) {
if( _toRun != null ) {
_toRun.runIt(t.getThreadData(p));
} else if( toRunRunnable != null ) {
toRunRunnable.run();
} else {
if( p.log.isDebugEnabled())
p.log.debug( "No toRun ???");
}
}
} catch(Throwable t) {
p.log.error(sm.getString("threadpool.thread_error",
t, toRun.toString()));
/*
* The runnable throw an exception (can be even a ThreadDeath),
* signalling that the thread die.
*
* The meaning is that we should release the thread from
* the pool.
*/
shouldTerminate = true;
shouldRun = false;
p.notifyThreadEnd(this);
} finally {
if(_shouldRun) {
shouldRun = false;
/*
* Notify the pool that the thread is now idle.
*/
p.returnController(this);
}
}
/*
* Check if should terminate.
* termination happens when the pool is shutting down.
*/
if(_shouldTerminate) {
break;
}
} catch(InterruptedException ie) { /* for the wait operation */
// can never happen, since we don't call interrupt
p.log.error("Unexpected exception", ie);
}
}
} finally {
p.removeThread(Thread.currentThread());
}
}
/** Run a task
*
* @param toRun
*/
public synchronized void runIt(Runnable toRun) {
this.toRunRunnable = toRun;
// Do not re-init, the whole idea is to run init only once per
// thread - the pool is supposed to run a single task, that is
// initialized once.
// noThData = true;
shouldRun = true;
this.notify();
}
/** Run a task
*
* @param toRun
*/
public synchronized void runIt(ThreadPoolRunnable toRun) {
this.toRun = toRun;
// Do not re-init, the whole idea is to run init only once per
// thread - the pool is supposed to run a single task, that is
// initialized once.
// noThData = true;
shouldRun = true;
this.notify();
}
public void stop() {
this.terminate();
}
public void kill() {
t.stop();
}
public synchronized void terminate() {
shouldTerminate = true;
this.notify();
}
}
/** Debug display of the stage of each thread. The return is html style,
* for display in the console ( it can be easily parsed too )
*
* @return
*/
public String threadStatusString() {
StringBuffer sb=new StringBuffer();
Iterator it=threads.keySet().iterator();
sb.append("");
while( it.hasNext()) {
sb.append("- ");
ThreadWithAttributes twa=(ThreadWithAttributes)
it.next();
sb.append(twa.getCurrentStage(this) ).append(" ");
sb.append( twa.getParam(this));
sb.append( "
\n");
}
sb.append("
");
return sb.toString();
}
/** Return an array with the status of each thread. The status
* indicates the current request processing stage ( for tomcat ) or
* whatever the thread is doing ( if the application using TP provide
* this info )
*
* @return
*/
public String[] getThreadStatus() {
String status[]=new String[ threads.size()];
Iterator it=threads.keySet().iterator();
for( int i=0; ( i