com.sun.xml.ws.client.package-info Maven / Gradle / Ivy
Show all versions of jaxws-rt Show documentation
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 1997-2010 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
/**
* JAX-WS 2.0.1 Client Runtime
* This document describes the architecture of client side
* JAX-WS 2.0.1 runtime.
*
*
JAX-WS 2.0.1 Client Sequence Diagram
* 
* JAX-WS 2.0.1 Asynchronous Invocation Sequence Diagram
* 
* JAX-WS 2.0.1 Dispatch Invocation Sequence Diagram
* 
* Message Flow
* {@link com.sun.xml.ws.client.WebService} provides client view of a Web service.
* WebService.getPort returns an instance of {@link com.sun.xml.ws.client.EndpointIFInvocationHandler}
* with {@link com.sun.pept.ept.ContactInfoList} and {@link com.sun.pept.Delegate}
* initialized. A method invocation on the port, obtained from WebService, invokes
* {@link com.sun.xml.ws.client.EndpointIFInvocationHandler#invoke}. This method
* then creates a {@link com.sun.pept.ept.MessageInfo} and populates the data
* (parameters specified by the user) and metadata such as RuntimeContext, RequestContext,
* Message Exchange Pattern into this MessageInfo. This method then invokes
* {@link com.sun.pept.Delegate#send} and returns the response.
*
* The Delegate.send method iterates through the ContactInfoList and picks up the
* correct {@link com.sun.pept.ept.ContactInfo} based upon the binding id of
* {@link javax.xml.ws.BindingProvider} and sets it on the MessageInfo. After the
* Delegate obtains a specific ContactInfo it uses that ContactInfo to obtain a
* protocol-specific {@link com.sun.pept.protocol.MessageDispatcher}. There will be
* two types of client-side MessageDispatchers for JAX-WS 2.0.1,
* {@link com.sun.xml.ws.protocol.soap.client.SOAPMessageDispatcher} and
* {@link com.sun.xml.ws.protocol.xml.client.XMLMessageDispatcher}. The Delegate
* then invokes {@link com.sun.pept.protocol.MessageDispatcher#send}. The
* MessageDispatcher.send method makes a decision about the synchronous and
* asynchronous nature of the message exchange pattern and invokes separate methods
* accordingly.
*
* The MessageDispatcher uses ContactInfo to obtain
* a {@link com.sun.xml.ws.encoding.soap.client.SOAPXMLEncoder} which converts
* the MessageInfo to {@link com.sun.xml.ws.encoding.soap.internal.InternalMessage}.
* There will be two types of client-side SOAPXMLEncoder for JAX-WS 2.0.1,
* SOAPXMEncoder for SOAP 1.1 and {@link com.sun.xml.ws.encoding.soap.client.SOAP12XMLEncoder}
* for SOAP 1.2. The MessageDispatcher invokes configured handlers and use the
* codec to convert the InternalMessage to a {@link javax.xml.soap.SOAPMessage}.
* The metadata from the MessageInfo is classified into {@link javax.xml.soap.MimeHeaders}
* of this SOAPMessage and context information for {@link com.sun.xml.ws.api.server.WSConnection}.
* The SOAPMessge is then written to the output stream of the WSConnection
* obtained from MessageInfo.
*
* The MessageDispatcher.receive method handles the response. The
* SOAPMessageDispatcher extracts the SOAPMessage from the input stream of
* WSConnection and performs the mustUnderstand processing followed by invocation
* of any handlers. The MessageDispatcher uses ContactInfo to obtain a
* {@link com.sun.xml.ws.encoding.soap.client.SOAPXMLDecoder} which converts the SOAPMessage
* to InternalMessage and then InternalMessage to MessageInfo. There will be two types of
* client-side SOAPXMLDecoder for JAX-WS 2.0.1, SOAPXMLDencoder for SOAP 1.1 and
* {@link com.sun.xml.ws.encoding.soap.client.SOAP12XMLDecoder} for SOAP 1.2. The
* response is returned back to the client code via Delegate.
*
* External Interactions
* SAAJ API
*
* JAX-WS creates SAAJ SOAPMessage from the HttpServletRequest.
* At present, JAX-WS reads all the bytes from the request stream and
* then creates SOAPMessage along with the HTTP headers.
*
* MessageFactory(binding).createMessage(MimeHeaders, InputStream)
*
* SOAPMessage parses the content from the stream including MIME
* data
* com.sun.xml.ws.server.SOAPMessageDispatcher::checkHeadersPeekBody()
* SOAPMessage.getSOAPHeader() is used for mustUnderstand processing
* of headers. It further uses
* SOAPHeader.examineMustUnderstandHeaderElements(role)
* SOAPMessage.getSOAPBody().getFistChild() is used for guessing the
* MEP of the request
* com.sun.xml.ws.handler.HandlerChainCaller:insertFaultMessage()
* SOAPMessage.getSOAPPart().getEnvelope() and some other SAAJ calls
* are made to create a fault in the SOAPMessage
* com.sun.xml.ws.handler.LogicalMessageImpl::getPayload()
* interacts with SAAJ to get body from SOAPMessage
* com.sun.xml.ws.encoding.soap.SOAPEncoder.toSOAPMessage(com.sun.xml.ws.encoding.soap.internal.InternalMessage,
* SOAPMessage). There is a scenario where there is SOAPMessage and a
* logical handler sets payload as Source. To write to the stream,
* SOAPMessage.writeTo() is used but before that the body needs to be
* updated with logical handler' Source. Need to verify if this
* scenario is still happening since Handler.close() is changed to take
* MessageContext.
* com.sun.xml.ws.handlerSOAPMessageContextImpl.getHeaders()
* uses SAAJ API to get headers.
* SOAPMessage.writeTo() is used to write response. At present,
* it writes into byte[] and this byte[] is written to
* HttpServletResponse.
*
* JAXB API
* JAX-WS RI uses the JAXB API to marshall/unmarshall user created
* JAXB objects with user created {@link javax.xml.bind.JAXBContext JAXBContext}.
* Handler, Dispatch in JAX-WS API provide ways for the user to specify his/her own
* JAXBContext. {@link com.sun.xml.ws.encoding.jaxb.JAXBTypeSerializer JAXBTypeSerializer} class uses all these methods.
*
* {@link javax.xml.bind.Marshaller#marshal(Object,XMLStreamWriter) Marshaller.marshal(Object,XMLStreamWriter)}
* {@link javax.xml.bind.Marshaller#marshal(Object,Result) Marshaller.marshal(Object, DomResult)}
* {@link javax.xml.bind.Unmarshaller#unmarshal(XMLStreamReader) Object Unmarshaller.unmarshal(XMLStreamReader)}
* {@link javax.xml.bind.Unmarshaller#unmarshal(Source) Object Unmarshaller.unmarshal(Source)}
*
* The following two JAXB classes are implemented by JAX-WS to enable/implement MTOM and XOP
*
* {@link javax.xml.bind.attachment.AttachmentMarshaller AttachmentMarshaller}
* {@link javax.xml.bind.attachment.AttachmentUnmarshaller AttachmentUnmarshaller}
*
* JAXB Runtime-API (private contract)
* JAX-WS RI uses these private API for serialization/deserialization
* purposes. This private API is used to serialize/deserialize method
* parameters at the time of JAXBTypeSerializer class uses all
* these methods.
*
* {@link com.sun.xml.bind.api.Bridge#marshal(BridgeContext, Object, XMLStreamWriter) Bridge.marshal(BridgeContext, Object, XMLStreamWriter)}
* {@link com.sun.xml.bind.api.Bridge#marshal(BridgeContext, Object, Node) Bridge.marshal(BridgeContext, Object, Node)}
* {@link com.sun.xml.bind.api.Bridge#unmarshal(BridgeContext, XMLStreamReader) Object Bridge.unmarshal(BridgeContext, XMLStreamReader)}
*
*
* @ArchitectureDocument
**/
package com.sun.xml.ws.client;
import com.sun.xml.bind.api.BridgeContext;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.stream.XMLStreamReader;
import javax.xml.stream.XMLStreamWriter;
import org.w3c.dom.Node;