javacc-7.0.4.examples.SimpleExamples.README Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of javacc Show documentation
Show all versions of javacc Show documentation
JavaCC modified by Tencent blueking.
The newest version!
/* Copyright (c) 2006, Sun Microsystems, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of the Sun Microsystems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
This directory contains five examples to get you started using JavaCC.
Each example is contained in a single grammar file and are listed
below:
Simple1.jj
Simple2.jj
Simple3.jj
Simple4.jj
NL_Xlator.jj
IdList.jj
Once you have tried out and understood each of these examples, you
should take a look at more complex examples in other sub-directories
under the examples directory. But even with just these examples, you
should be able to get started on reasonable complex grammars.
---------------------------------------------------------------------
Summary Instructions:
If you are a parser and lexical analyzer expert and can understand the
examples by just reading them, the following instructions show you how
to get started with javacc. The instructions below are with respect
to Simple1.jj, but you can build any parser using the same set of
commands.
1. Run javacc on the grammar input file to generate a bunch of Java
files that implement the parser and lexical analyzer (or token
manager):
javacc Simple1.jj
2. Now compile the resulting Java programs:
javac *.java
3. The parser is now ready to use. To run the parser, type:
java Simple1
The Simple1 parser and others in this directory are designed to take
input from standard input. Simple1 recognizes matching braces
followed by zero or more line terminators and then an end of file.
Examples of legal strings in this grammar are:
"{}", "{{{{{}}}}}", etc.
Examples of illegal strings are:
"{{{{", "{}{}", "{}}", "{{}{}}", "{ }", "{x}", etc.
Try typing various different inputs to Simple1. Remember
may be used to indicate the end of file (this is on the UNIX platform).
Here are some sample runs:
% java Simple1
{{}}
%
% java Simple1
{x
Lexical error at line 1, column 2. Encountered: "x"
TokenMgrError: Lexical error at line 1, column 2. Encountered: "x" (120), after : ""
at Simple1TokenManager.getNextToken(Simple1TokenManager.java:146)
at Simple1.getToken(Simple1.java:140)
at Simple1.MatchedBraces(Simple1.java:51)
at Simple1.Input(Simple1.java:10)
at Simple1.main(Simple1.java:6)
%
% java Simple1
{}}
ParseException: Encountered "}" at line 1, column 3.
Was expecting one of:
"\n" ...
"\r" ...
at Simple1.generateParseException(Simple1.java:184)
at Simple1.jj_consume_token(Simple1.java:126)
at Simple1.Input(Simple1.java:32)
at Simple1.main(Simple1.java:6)
%
---------------------------------------------------------------------
DETAILED DESCRIPTION OF Simple1.jj:
This is a simple JavaCC grammar that recognizes a set of left braces
followed by the same number of right braces and finally followed by
zero or more line terminators and finally an end of file. Examples of
legal strings in this grammar are:
"{}", "{{{{{}}}}}", etc.
Examples of illegal strings are:
"{{{{", "{}{}", "{}}", "{{}{}}", etc.
This grammar file starts with settings for all the options offered by
JavaCC. In this case the option settings are their default values.
Hence these option settings were really not necessary. One could as
well have completely omitted the options section, or omitted one or
more of the individual option settings. The details of the individual
options is described in the JavaCC documentation in the web pages.
Following this is a Java compilation unit enclosed between
"PARSER_BEGIN(name)" and "PARSER_END(name)". This compilation unit
can be of arbitrary complexity. The only constraint on this
compilation unit is that it must define a class called "name" - the
same as the arguments to PARSER_BEGIN and PARSER_END. This is the
name that is used as the prefix for the Java files generated by the
parser generator. The parser code that is generated is inserted
immediately before the closing brace of the class called "name".
In the above example, the class in which the parser is generated
contains a main program. This main program creates an instance of the
parser object (an object of type Simple1) by using a constructor that
takes one argument of type java.io.InputStream ("System.in" in this
case).
The main program then makes a call to the non-terminal in the grammar
that it would like to parse - "Input" in this case. All non-terminals
have equal status in a JavaCC generated parser, and hence one may
parse with respect to any grammar non-terminal.
Following this is a list of productions. In this example, there are
two productions, that define the non-terminals "Input" and
"MatchedBraces" respectively. In JavaCC grammars, non-terminals are
written and implemented (by JavaCC) as Java methods. When the
non-terminal is used on the left-hand side of a production, it is
considered to be declared and its syntax follows the Java syntax. On
the right-hand side its use is similar to a method call in Java.
Each production defines its left-hand side non-terminal followed by a
colon. This is followed by a bunch of declarations and statements
within braces (in both cases in the above example, there are no
declarations and hence this appears as "{}") which are generated as
common declarations and statements into the generated method. This is
then followed by a set of expansions also enclosed within braces.
Lexical tokens (regular expressions) in a JavaCC input grammar are
either simple strings ("{", "}", "\n", and "\r" in the above example),
or a more complex regular expression. In our example above, there is
one such regular expression "" which is matched by the end of
file. All complex regular expressions are enclosed within angular
brackets.
The first production above says that the non-terminal "Input" expands
to the non-terminal "MatchedBraces" followed by zero or more line
terminators ("\n" or "\r") and then the end of file.
The second production above says that the non-terminal "MatchedBraces"
expands to the token "{" followed by an optional nested expansion of
"MatchedBraces" followed by the token "}". Square brackets [...]
in a JavaCC input file indicate that the ... is optional.
[...] may also be written as (...)?. These two forms are equivalent.
Other structures that may appear in expansions are:
e1 | e2 | e3 | ... : A choice of e1, e2, e3, etc.
( e )+ : One or more occurrences of e
( e )* : Zero or more occurrences of e
Note that these may be nested within each other, so we can have
something like:
(( e1 | e2 )* [ e3 ] ) | e4
To build this parser, simply run JavaCC on this file and compile the
resulting Java files:
javacc Simple1.jj
javac *.java
Now you should be able to run the generated parser. Make sure that
the current directory is in your CLASSPATH and type:
java Simple1
Now type a sequence of matching braces followed by a return and an end
of file (CTRL-D on UNIX machines). If this is a problem on your
machine, you can create a file and pipe it as input to the generated
parser in this manner (piping also does not work on all machines - if
this is a problem, just replace "System.in" in the grammar file with
'new FileInputStream("testfile")' and place your input inside this
file):
java Simple1 < myfile
Also try entering illegal sequences such as mismatched braces, spaces,
and carriage returns between braces as well as other characters and
take a look at the error messages produced by the parser.
---------------------------------------------------------------------
DETAILED DESCRIPTION OF Simple2.jj:
Simple2.jj is a minor modification to Simple1.jj to allow white space
characters to be interspersed among the braces. So then input such
as:
"{{ }\n}\n\n"
will now be legal.
Take a look at Simple2.jj. The first thing you will note is that we
have omitted the options section. This does not change anything since
the options in Simple1.jj were all assigned their default values.
The other difference between this file and Simple1.jj is that this
file contains a lexical specification - the region that starts with
"SKIP". Within this region are 4 regular expressions - space, tab,
newline, and return. This says that matches of these regular
expressions are to be ignored (and not considered for parsing). Hence
whenever any of these 4 characters are encountered, they are just
thrown away.
In addition to SKIP, JavaCC has three other lexical specification
regions. These are:
. TOKEN: This is used to specify lexical tokens (see next example)
. SPECIAL_TOKEN: This is used to specify lexical tokens that are to be
ignored during parsing. In this sense, SPECIAL_TOKEN is
the same as SKIP. However, these tokens can be recovered
within parser actions to be handled appropriately.
. MORE: This specifies a partial token. A complete token is
made up of a sequence of MORE's followed by a TOKEN
or SPECIAL_TOKEN.
Please take a look at some of the more complex grammars such as the
Java grammars for examples of usage of these lexical specification
regions.
You may build Simple2 and invoke the generated parser with input from
the keyboard as standard input.
You can also try generating the parser with the various debug options
turned on and see what the output looks like. To do this type:
javacc -debug_parser Simple2.jj
javac Simple2*.java
java Simple2
Then type:
javacc -debug_token_manager Simple2.jj
javac Simple2*.java
java Simple2
Note that token manager debugging produces a lot of diagnostic
information and it is typically used to look at debug traces a single
token at a time.
---------------------------------------------------------------------
DETAILED DESCRIPTION OF Simple3.jj:
Simple3.jj is the third and final version of our matching brace
detector. This example illustrates the use of the TOKEN region for
specifying lexical tokens. In this case, "{" and "}" are defined as
tokens and given names LBRACE and RBRACE respectively. These labels
can then be used within angular brackets (as in the example) to refer
to this token. Typically such token specifications are used for
complex tokens such as identifiers and literals. Tokens that are
simple strings are left as is (in the previous examples).
This example also illustrates the use of actions in the grammar
productions. The actions inserted in this example count the number of
matching braces. Note the use of the declaration region to declare
variables "count" and "nested_count". Also note how the non-terminal
"MatchedBraces" returns its value as a function return value.
---------------------------------------------------------------------
DETAILED DESCRIPTION OF NL_Xlator.jj:
This example goes into the details of writing regular expressions in
JavaCC grammar files. It also illustrates a slightly more complex set
of actions that translate the expressions described by the grammar
into English.
The new concept in the above example is the use of more complex
regular expressions. The regular expression:
< ID: ["a"-"z","A"-"Z","_"] ( ["a"-"z","A"-"Z","_","0"-"9"] )* >
creates a new regular expression whose name is ID. This can be
referred anywhere else in the grammar simply as . What follows in
square brackets are a set of allowable characters - in this case it is
any of the lower or upper case letters or the underscore. This is
followed by 0 or more occurrences of any of the lower or upper case
letters, digits, or the underscore.
Other constructs that may appear in regular expressions are:
( ... )+ : One or more occurrences of ...
( ... )? : An optional occurrence of ... (Note that in the case
of lexical tokens, (...)? and [...] are not equivalent)
( r1 | r2 | ... ) : Any one of r1, r2, ...
A construct of the form [...] is a pattern that is matched by the
characters specified in ... . These characters can be individual
characters or character ranges. A "~" before this construct is a
pattern that matches any character not specified in ... . Therefore:
["a"-"z"] matches all lower case letters
~[] matches any character
~["\n","\r"] matches any character except the new line characters
When a regular expression is used in an expansion, it takes a value of
type "Token". This is generated into the generated parser directory
as "Token.java". In the above example, we have defined a variable of
type "Token" and assigned the value of the regular expression to it.
---------------------------------------------------------------------
DETAILED DESCRIPTION OF IdList.jj:
This example illustrates an important attribute of the SKIP
specification. The main point to note is that the regular expressions
in the SKIP specification are only ignored *between tokens* and not
*within tokens*. This grammar accepts any sequence of identifiers
with white space in between.
A legal input for this grammar is:
"abc xyz123 A B C \t\n aaa"
This is because any number of the SKIP regular expressions are allowed
in between consecutive 's. However, the following is not a legal
input:
"xyz 123"
This is because the space character after "xyz" is in the SKIP
category and therefore causes one token to end and another to begin.
This requires "123" to be a separate token and hence does not match
the grammar.
If spaces were OK within 's, then all one has to do is to replace
the definition of Id to:
TOKEN :
{
< Id: ["a"-"z","A"-"Z"] ( (" ")* ["a"-"z","A"-"Z","0"-"9"] )* >
}
Note that having a space character within a TOKEN specification does
not mean that the space character cannot be used in the SKIP
specification. All this means is that any space character that
appears in the context where it can be placed within an identifier
will participate in the match for , whereas all other space
characters will be ignored. The details of the matching algorithm are
described in the JavaCC documentation in the web pages.
As a corollary, one must define as tokens anything within which
characters such as white space characters must not be present. In the
above example, if was defined as a grammar production rather than
a lexical token as shown below this paragraph, then "xyz 123" would
have been recognized as a legitimate (wrongly).
void Id() :
{}
{
<["a"-"z","A"-"Z"]> ( <["a"-"z","A"-"Z","0"-"9"]> )*
}
Note that in the above definition of non-terminal Id, it is made up of
a sequence of single character tokens (note the location of <...>s),
and hence white space is allowed between these characters.
---------------------------------------------------------------------