com.tencent.tinker.commons.ziputil.TinkerZipOutputStream Maven / Gradle / Ivy
Show all versions of tinker-commons Show documentation
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.tencent.tinker.commons.ziputil;
// import libcore.util.CountingOutputStream;
// import libcore.util.EmptyArray;
import java.io.ByteArrayOutputStream;
import java.io.FilterOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.util.HashSet;
import java.util.zip.GZIPOutputStream;
import java.util.zip.ZipException;
import java.util.zip.ZipInputStream;
// import java.nio.charset.StandardCharsets;
// import java.util.Arrays;
/**
* modify by zhangshaowen on 16/6/7.
* remove zip64
* const time, modDate
* remove entry extra
* remove entry comment
*
* Used to write (compress) data into zip files.
*
* {@code ZipOutputStream} is used to write {@link TinkerZipEntry}s to the underlying
* stream. Output from {@code ZipOutputStream} can be read using {@link TinkerZipFile}
* or {@link ZipInputStream}.
*
*
While {@code DeflaterOutputStream} can write compressed zip file
* entries, this extension can write uncompressed entries as well.
* Use {@link TinkerZipEntry#setMethod} or @link #setMethod with the {@link TinkerZipEntry#STORED} flag.
*
*
Example
* Using {@code ZipOutputStream} is a little more complicated than {@link GZIPOutputStream}
* because zip files are containers that can contain multiple files. This code creates a zip
* file containing several files, similar to the {@code zip(1)} utility.
*
* OutputStream os = ...
* ZipOutputStream zos = new ZipOutputStream(new BufferedOutputStream(os));
* try {
* for (int i = 0; i < fileCount; ++i) {
* String filename = ...
* byte[] bytes = ...
* ZipEntry entry = new ZipEntry(filename);
* zos.putNextEntry(entry);
* zos.write(bytes);
* zos.closeEntry();
* }
* } finally {
* zos.close();
* }
*
*/
public class TinkerZipOutputStream extends FilterOutputStream implements ZipConstants {
/**
* Indicates deflated entries.
*/
public static final int DEFLATED = 8;
/**
* Indicates uncompressed entries.
*/
public static final int STORED = 0;
public static final byte[] BYTE = new byte[0];
//zhangshaowen edit here, we just want the same time and modDate
//remove random fields
final static int TIME_CONST = 40691;
final static int MOD_DATE_CONST = 18698;
private static final int ZIP_VERSION_2_0 = 20; // Zip specification version 2.0.
private static final byte[] ZIP64_PLACEHOLDER_BYTES =
new byte[] {(byte) 0xff, (byte) 0xff, (byte) 0xff, (byte) 0xff};
private final HashSet entries = new HashSet();
/**
* Whether we force all entries in this archive to have a zip64 extended info record.
* This of course implies that the {@code currentEntryNeedsZip64} and
* {@code archiveNeedsZip64EocdRecord} are always {@code true}.
*/
private final boolean forceZip64;
private byte[] commentBytes = BYTE;
private int defaultCompressionMethod = DEFLATED;
// private int compressionLevel = Deflater.DEFAULT_COMPRESSION;
private ByteArrayOutputStream cDir = new ByteArrayOutputStream();
private TinkerZipEntry currentEntry;
// private final CRC32 crc = new CRC32();
private long offset = 0;
/** The charset-encoded name for the current entry. */
private byte[] nameBytes;
/** The charset-encoded comment for the current entry. */
private byte[] entryCommentBytes;
/**
* Whether this zip file needs a Zip64 EOCD record / zip64 EOCD record locator. This
* will be true if we wrote an entry whose size or compressed size was too large for
* the standard zip format or if we exceeded the maximum number of entries allowed
* in the standard format.
*/
private boolean archiveNeedsZip64EocdRecord;
/**
* Whether the current entry being processed needs a zip64 extended info record. This
* will be true if the entry is too large for the standard zip format or if the offset
* to the start of the current entry header is greater than 0xFFFFFFFF.
*/
private boolean currentEntryNeedsZip64;
/**
* Constructs a new {@code ZipOutputStream} that writes a zip file to the given
* {@code OutputStream}.
*
* UTF-8 will be used to encode the file comment, entry names and comments.
*/
public TinkerZipOutputStream(OutputStream os) {
this(os, false /* forceZip64 */);
}
/**
* @hide for testing only.
*/
public TinkerZipOutputStream(OutputStream os, boolean forceZip64) {
super(os);
this.forceZip64 = forceZip64;
}
/**
* Sets the default compression method to be used when a {@code ZipEntry} doesn't
* explicitly specify a method. See {@link TinkerZipEntry#setMethod} for more details.
*/
/*public void setMethod(int method) {
if (method != STORED && method != DEFLATED) {
throw new IllegalArgumentException("Bad method: " + method);
}
defaultCompressionMethod = method;
}*/
static long writeLongAsUint32(OutputStream os, long i) throws IOException {
// Write out the long value as an unsigned int
os.write((int) (i & 0xFF));
os.write((int) (i >> 8) & 0xFF);
os.write((int) (i >> 16) & 0xFF);
os.write((int) (i >> 24) & 0xFF);
return i;
}
static long writeLongAsUint64(OutputStream os, long i) throws IOException {
int i1 = (int) i;
os.write(i1 & 0xFF);
os.write((i1 >> 8) & 0xFF);
os.write((i1 >> 16) & 0xFF);
os.write((i1 >> 24) & 0xFF);
int i2 = (int) (i >> 32);
os.write(i2 & 0xFF);
os.write((i2 >> 8) & 0xFF);
os.write((i2 >> 16) & 0xFF);
os.write((i2 >> 24) & 0xFF);
return i;
}
static int writeIntAsUint16(OutputStream os, int i) throws IOException {
os.write(i & 0xFF);
os.write((i >> 8) & 0xFF);
return i;
}
/**
* Closes the current {@code ZipEntry}, if any, and the underlying output
* stream. If the stream is already closed this method does nothing.
*
* @throws IOException
* If an error occurs closing the stream.
*/
@Override
public void close() throws IOException {
// don't call super.close() because that calls finish() conditionally
if (out != null) {
finish();
// def.end();
out.close();
out = null;
}
}
/*private void checkAndSetZip64Requirements(ZipEntry entry) {
final long totalBytesWritten = getBytesWritten();
final long entriesWritten = entries.size();
currentEntryNeedsZip64 = false;
if (forceZip64) {
currentEntryNeedsZip64 = true;
archiveNeedsZip64EocdRecord = true;
return;
}
// In this particular case, we'll write a zip64 eocd record locator and a zip64 eocd
// record but we won't actually need zip64 extended info records for any of the individual
// entries (unless they trigger the checks below).
if (entriesWritten == 64*1024 - 1) {
archiveNeedsZip64EocdRecord = true;
}
// Check whether we'll need to write out a zip64 extended info record in both the local file header
// and the central directory. In addition, we will need a zip64 eocd record locator
// and record to mark this archive as zip64.
//
// TODO: This is an imprecise check. When method != STORED it's possible that the compressed
// size will be (slightly) larger than the actual size. How can we improve this ?
if (totalBytesWritten > Zip64.MAX_ZIP_ENTRY_AND_ARCHIVE_SIZE ||
(entry.getSize() > Zip64.MAX_ZIP_ENTRY_AND_ARCHIVE_SIZE)) {
currentEntryNeedsZip64 = true;
archiveNeedsZip64EocdRecord = true;
}
}*/
/**
* Closes the current {@code ZipEntry}. Any entry terminal data is written
* to the underlying stream.
*
* @throws IOException
* If an error occurs closing the entry.
*/
public void closeEntry() throws IOException {
checkOpen();
if (currentEntry == null) {
return;
}
/*if (currentEntry.getMethod() == DEFLATED) {
super.finish();
}
// Verify values for STORED types
if (currentEntry.getMethod() == STORED) {
if (crc.getValue() != currentEntry.crc) {
throw new ZipException("CRC mismatch");
}
if (currentEntry.size != crc.tbytes) {
throw new ZipException("Size mismatch");
}
}*/
long curOffset = LOCHDR;
// Write the DataDescriptor
if (currentEntry.getMethod() != STORED) {
curOffset += EXTHDR;
// Data descriptor signature and CRC are 4 bytes each for both zip and zip64.
writeLongAsUint32(out, EXTSIG);
/*writeLongAsUint32(out, currentEntry.crc = crc.getValue());
currentEntry.compressedSize = def.getBytesWritten();
currentEntry.size = def.getBytesRead();*/
writeLongAsUint32(out, currentEntry.crc);
/*if (currentEntryNeedsZip64) {
// We need an additional 8 bytes to store 8 byte compressed / uncompressed
// sizes.
curOffset += 8;
writeLongAsUint64(out, currentEntry.compressedSize);
writeLongAsUint64(out, currentEntry.size);
} else {
writeLongAsUint32(out, currentEntry.compressedSize);
writeLongAsUint32(out, currentEntry.size);
}*/
writeLongAsUint32(out, currentEntry.compressedSize);
writeLongAsUint32(out, currentEntry.size);
}
// Update the CentralDirectory
// http://www.pkware.com/documents/casestudies/APPNOTE.TXT
int flags = currentEntry.getMethod() == STORED ? 0 : TinkerZipFile.GPBF_DATA_DESCRIPTOR_FLAG;
// Since gingerbread, we always set the UTF-8 flag on individual files if appropriate.
// Some tools insist that the central directory have the UTF-8 flag.
// http://code.google.com/p/android/issues/detail?id=20214
flags |= TinkerZipFile.GPBF_UTF8_FLAG;
writeLongAsUint32(cDir, CENSIG);
writeIntAsUint16(cDir, ZIP_VERSION_2_0); // Version this file was made by.
writeIntAsUint16(cDir, ZIP_VERSION_2_0); // Minimum version needed to extract.
writeIntAsUint16(cDir, flags);
writeIntAsUint16(cDir, currentEntry.getMethod());
writeIntAsUint16(cDir, currentEntry.time);
writeIntAsUint16(cDir, currentEntry.modDate);
// writeLongAsUint32(cDir, crc.getValue());
writeLongAsUint32(cDir, currentEntry.crc);
if (currentEntry.getMethod() == DEFLATED) {
/*currentEntry.setCompressedSize(def.getBytesWritten());
currentEntry.setSize(def.getBytesRead());*/
curOffset += currentEntry.getCompressedSize();
} else {
/*currentEntry.setCompressedSize(crc.tbytes);
currentEntry.setSize(crc.tbytes);*/
curOffset += currentEntry.getSize();
}
/*if (currentEntryNeedsZip64) {
// Refresh the extended info with the compressed size / size before
// writing it to the central directory.
Zip64.refreshZip64ExtendedInfo(currentEntry);
// NOTE: We would've written out the zip64 extended info locator to the entry
// extras while constructing the local file header. There's no need to do it again
// here. If we do, there will be a size mismatch since we're calculating offsets
// based on the *current* size of the extra data and not based on the size
// at the point of writing the LFH.
writeLongAsUint32(cDir, Zip64.MAX_ZIP_ENTRY_AND_ARCHIVE_SIZE);
writeLongAsUint32(cDir, Zip64.MAX_ZIP_ENTRY_AND_ARCHIVE_SIZE);
} else {
writeLongAsUint32(cDir, currentEntry.getCompressedSize());
writeLongAsUint32(cDir, currentEntry.getSize());
}*/
writeLongAsUint32(cDir, currentEntry.getCompressedSize());
writeLongAsUint32(cDir, currentEntry.getSize());
curOffset += writeIntAsUint16(cDir, nameBytes.length);
if (currentEntry.extra != null) {
curOffset += writeIntAsUint16(cDir, currentEntry.extra.length);
} else {
writeIntAsUint16(cDir, 0);
}
writeIntAsUint16(cDir, entryCommentBytes.length); // Comment length.
writeIntAsUint16(cDir, 0); // Disk Start
writeIntAsUint16(cDir, 0); // Internal File Attributes
writeLongAsUint32(cDir, 0); // External File Attributes
/*if (currentEntryNeedsZip64) {
writeLongAsUint32(cDir, Zip64.MAX_ZIP_ENTRY_AND_ARCHIVE_SIZE);
} else {
writeLongAsUint32(cDir, currentEntry.localHeaderRelOffset);
}*/
writeLongAsUint32(cDir, currentEntry.localHeaderRelOffset);
cDir.write(nameBytes);
nameBytes = null;
if (currentEntry.extra != null) {
cDir.write(currentEntry.extra);
}
offset += curOffset;
if (entryCommentBytes.length > 0) {
cDir.write(entryCommentBytes);
entryCommentBytes = BYTE;
}
currentEntry = null;
/*crc.reset();
def.reset();
done = false;*/
}
/**
* Sets the compression level to be used
* for writing entry data.
*/
/*public void setLevel(int level) {
if (level < Deflater.DEFAULT_COMPRESSION || level > Deflater.BEST_COMPRESSION) {
throw new IllegalArgumentException("Bad level: " + level);
}
compressionLevel = level;
}*/
/**
* Indicates that all entries have been written to the stream. Any terminal
* information is written to the underlying stream.
*
* @throws IOException
* if an error occurs while terminating the stream.
*/
// @Override
public void finish() throws IOException {
// TODO: is there a bug here? why not checkOpen?
if (out == null) {
throw new IOException("Stream is closed");
}
if (cDir == null) {
return;
}
if (entries.isEmpty()) {
throw new ZipException("No entries");
}
if (currentEntry != null) {
closeEntry();
}
int cdirEntriesSize = cDir.size();
/*if (archiveNeedsZip64EocdRecord) {
Zip64.writeZip64EocdRecordAndLocator(cDir, entries.size(), offset, cdirEntriesSize);
}*/
// Write Central Dir End
writeLongAsUint32(cDir, ENDSIG);
writeIntAsUint16(cDir, 0); // Disk Number
writeIntAsUint16(cDir, 0); // Start Disk
// Instead of trying to figure out *why* this archive needed a zip64 eocd record,
// just delegate all these values to the zip64 eocd record.
if (archiveNeedsZip64EocdRecord) {
writeIntAsUint16(cDir, 0xFFFF); // Number of entries
writeIntAsUint16(cDir, 0xFFFF); // Number of entries
writeLongAsUint32(cDir, 0xFFFFFFFF); // Size of central dir
writeLongAsUint32(cDir, 0xFFFFFFFF); // Offset of central dir;
} else {
writeIntAsUint16(cDir, entries.size()); // Number of entries
writeIntAsUint16(cDir, entries.size()); // Number of entries
writeLongAsUint32(cDir, cdirEntriesSize); // Size of central dir
writeLongAsUint32(cDir, offset); // Offset of central dir
}
writeIntAsUint16(cDir, commentBytes.length);
if (commentBytes.length > 0) {
cDir.write(commentBytes);
}
// Write the central directory.
cDir.writeTo(out);
cDir = null;
}
/**
* Writes entry information to the underlying stream. Data associated with
* the entry can then be written using {@code write()}. After data is
* written {@code closeEntry()} must be called to complete the writing of
* the entry to the underlying stream.
*
* @param ze
* the {@code ZipEntry} to store.
* @throws IOException
* If an error occurs storing the entry.
* @see #write
*/
public void putNextEntry(TinkerZipEntry ze) throws IOException {
if (currentEntry != null) {
closeEntry();
}
// Did this ZipEntry specify a method, or should we use the default?
int method = ze.getMethod();
if (method == -1) {
method = defaultCompressionMethod;
}
// If the method is STORED, check that the ZipEntry was configured appropriately.
if (method == STORED) {
if (ze.getCompressedSize() == -1) {
ze.setCompressedSize(ze.getSize());
} else if (ze.getSize() == -1) {
ze.setSize(ze.getCompressedSize());
}
if (ze.getCrc() == -1) {
throw new ZipException("STORED entry missing CRC");
}
if (ze.getSize() == -1) {
throw new ZipException("STORED entry missing size");
}
if (ze.size != ze.compressedSize) {
throw new ZipException("STORED entry size/compressed size mismatch");
}
}
checkOpen();
// checkAndSetZip64Requirements(ze);
//zhangshaowen edit here, we just want the same time and modDate
ze.comment = null;
ze.extra = null;
ze.time = TIME_CONST;
ze.modDate = MOD_DATE_CONST;
nameBytes = ze.name.getBytes(StandardCharsets.UTF_8);
checkSizeIsWithinShort("Name", nameBytes);
entryCommentBytes = BYTE;
if (ze.comment != null) {
entryCommentBytes = ze.comment.getBytes(StandardCharsets.UTF_8);
// The comment is not written out until the entry is finished, but it is validated here
// to fail-fast.
checkSizeIsWithinShort("Comment", entryCommentBytes);
}
// def.setLevel(compressionLevel);
ze.setMethod(method);
currentEntry = ze;
currentEntry.localHeaderRelOffset = offset;
entries.add(currentEntry.name);
// Local file header.
// http://www.pkware.com/documents/casestudies/APPNOTE.TXT
int flags = (method == STORED) ? 0 : TinkerZipFile.GPBF_DATA_DESCRIPTOR_FLAG;
// Java always outputs UTF-8 filenames. (Before Java 7, the RI didn't set this flag and used
// modified UTF-8. From Java 7, when using UTF_8 it sets this flag and uses normal UTF-8.)
flags |= TinkerZipFile.GPBF_UTF8_FLAG;
writeLongAsUint32(out, LOCSIG); // Entry header
writeIntAsUint16(out, ZIP_VERSION_2_0); // Minimum version needed to extract.
writeIntAsUint16(out, flags);
writeIntAsUint16(out, method);
//zhangshaowen edit here, we just want the same time and modDate
// if (currentEntry.getTime() == -1) {
// currentEntry.setTime(System.currentTimeMillis());
// }
writeIntAsUint16(out, currentEntry.time);
writeIntAsUint16(out, currentEntry.modDate);
if (method == STORED) {
writeLongAsUint32(out, currentEntry.crc);
/*if (currentEntryNeedsZip64) {
// NOTE: According to the spec, we're allowed to use these fields under zip64
// as long as the sizes are <= 4G (and omit writing the zip64 extended information header).
//
// For simplicity, we write the zip64 extended info here even if we only need it
// in the central directory (i.e, the case where we're turning on zip64 because the
// offset to this entries LFH is > 0xFFFFFFFF).
out.write(ZIP64_PLACEHOLDER_BYTES); // compressed size
out.write(ZIP64_PLACEHOLDER_BYTES); // uncompressed size
} else {
writeLongAsUint32(out, currentEntry.size);
writeLongAsUint32(out, currentEntry.size);
}*/
writeLongAsUint32(out, currentEntry.size);
writeLongAsUint32(out, currentEntry.size);
} else {
writeLongAsUint32(out, 0);
writeLongAsUint32(out, 0);
writeLongAsUint32(out, 0);
}
writeIntAsUint16(out, nameBytes.length);
/*if (currentEntryNeedsZip64) {
Zip64.insertZip64ExtendedInfoToExtras(currentEntry);
}*/
if (currentEntry.extra != null) {
writeIntAsUint16(out, currentEntry.extra.length);
} else {
writeIntAsUint16(out, 0);
}
out.write(nameBytes);
if (currentEntry.extra != null) {
out.write(currentEntry.extra);
}
}
/**
* Sets the comment associated with the file being written. See {@link TinkerZipFile#getComment}.
* @throws IllegalArgumentException if the comment is >= 64 Ki encoded bytes.
*/
public void setComment(String comment) {
if (comment == null) {
this.commentBytes = BYTE;
return;
}
byte[] newCommentBytes = comment.getBytes(StandardCharsets.UTF_8);
checkSizeIsWithinShort("Comment", newCommentBytes);
this.commentBytes = newCommentBytes;
}
/**
* Writes data for the current entry to the underlying stream.
*
* @throws IOException
* If an error occurs writing to the stream
*/
@Override
public void write(byte[] buffer, int offset, int byteCount) throws IOException {
Arrays.checkOffsetAndCount(buffer.length, offset, byteCount);
if (currentEntry == null) {
throw new ZipException("No active entry");
}
/*final long totalBytes = crc.tbytes + byteCount;
if ((totalBytes > Zip64.MAX_ZIP_ENTRY_AND_ARCHIVE_SIZE) && !currentEntryNeedsZip64) {
throw new IOException("Zip entry size (" + totalBytes +
" bytes) cannot be represented in the zip format (needs Zip64)." +
" Set the entry length using ZipEntry#setLength to use Zip64 where necessary.");
}*/
if (currentEntry.getMethod() == STORED) {
out.write(buffer, offset, byteCount);
} else {
out.write(buffer, offset, byteCount);
}
// crc.update(buffer, offset, byteCount);
}
private void checkOpen() throws IOException {
if (cDir == null) {
throw new IOException("Stream is closed");
}
}
private void checkSizeIsWithinShort(String property, byte[] bytes) {
if (bytes.length > 0xffff) {
throw new IllegalArgumentException(property
+ " too long in UTF-8:"
+ bytes.length
+ " bytes");
}
}
/*private long getBytesWritten() {
// This cast is somewhat messy but less error prone than keeping an
// CountingOutputStream reference around in addition to the FilterOutputStream's
// out.
return ((CountingOutputStream) out).getCount();
}*/
}