com.unboundid.util.json.LDAPConnectionDetailsJSONSpecification Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of unboundid-ldapsdk Show documentation
Show all versions of unboundid-ldapsdk Show documentation
The UnboundID LDAP SDK for Java is a fast, comprehensive, and easy-to-use
Java API for communicating with LDAP directory servers and performing
related tasks like reading and writing LDIF, encoding and decoding data
using base64 and ASN.1 BER, and performing secure communication. This
package contains the Standard Edition of the LDAP SDK, which is a
complete, general-purpose library for communicating with LDAPv3 directory
servers.
/*
* Copyright 2015-2022 Ping Identity Corporation
* All Rights Reserved.
*/
/*
* Copyright 2015-2022 Ping Identity Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Copyright (C) 2015-2022 Ping Identity Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (GPLv2 only)
* or the terms of the GNU Lesser General Public License (LGPLv2.1 only)
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see .
*/
package com.unboundid.util.json;
import java.io.BufferedReader;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileReader;
import java.io.InputStream;
import java.io.IOException;
import java.util.Arrays;
import java.util.HashSet;
import com.unboundid.ldap.sdk.BindRequest;
import com.unboundid.ldap.sdk.LDAPConnection;
import com.unboundid.ldap.sdk.LDAPConnectionPool;
import com.unboundid.ldap.sdk.LDAPException;
import com.unboundid.ldap.sdk.ResultCode;
import com.unboundid.ldap.sdk.ServerSet;
import com.unboundid.util.ByteStringBuffer;
import com.unboundid.util.Debug;
import com.unboundid.util.NotMutable;
import com.unboundid.util.NotNull;
import com.unboundid.util.Nullable;
import com.unboundid.util.StaticUtils;
import com.unboundid.util.ThreadSafety;
import com.unboundid.util.ThreadSafetyLevel;
import static com.unboundid.util.json.JSONMessages.*;
/**
* This class provides a utility that may be used to obtain information that may
* be used to create LDAP connections to one or more servers from a definition
* contained in a JSON object. This makes it easier to create applications that
* provide the information necessary for creating LDAP connections and
* connection pools in a JSON-formatted configuration file.
*
* The JSON-based specification is organized into five sections:
*
* -
* A "server-details" section that provides information about the directory
* server(s) to access. The specification supports accessing a single
* server, as well as a number of schemes for establishing connections
* across multiple servers.
*
* -
* A "communication-security" section that provides information that may be
* used to secure communication using SSL or StartTLS.
*
* -
* A "connection-options" section that can be used customize a number of
* connection-related options, like connect and response timeouts, whether
* to follow referrals, whether to retrieve schema from the backend server
* for client-side use, and whether to use synchronous mode for more
* efficient communication if connections will not be used in an
* asynchronous manner.
*
* -
* An "authentication-details" section that provides information for
* authenticating connections using a number of mechanisms.
*
* -
* A "connection-pool-options" section that provides information to use to
* customize the behavior to use for connection pools created from this
* specification.
*
*
* Each of these sections will be described in more detail below.
*
* The "server-details" Section
* The JSON object that comprises the LDAP connection details specification must
* have a top-level "server-details" field whose value is a JSON object that
* provides information about the server(s) to which connections may be
* established. The value of the "server-details" field must itself be a JSON
* object, and that object must have exactly one field, which depends on the
* mechanism that the LDAP SDK should use to select the target directory
* servers.
*
* The "server-details" Section for Connecting to a Single Server
*
* When establishing a connection to a single server, the "server-details"
* value should be a JSON object that contains a "single-server" field whose
* value is a JSON object with "address" and "port" fields. For example, the
* following is a valid specification that may be used to establish connections
* to the server at ldap.example.com on port 389:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":389
* }
* }
* }
*
*
* The "server-details" Section for Selecting from a Set of Servers in a
* Round-Robin Manner
*
* If you have a set of servers that you want to connect to in a round-robin
* manner (in which the LDAP SDK will maintain a circular list of servers and
* each new connection will go to the next server in the list), the
* "server-details" value should be a JSON object that contains a
* "round-robin-set" field whose value is a JSON object that contains a "server"
* field with an array of JSON objects, each of which contains "address" and
* "port" fields for a target server. For example, the following is a valid
* specification that may be used to establish connections across the servers
* ldap1.example.com, ldap2.example.com, and ldap3.example.com, all on port 389:
*
* {
* "server-details":
* {
* "round-robin-set":
* {
* "servers":
* [
* {
* "address":"ldap1.example.com",
* "port":389
* },
* {
* "address":"ldap2.example.com",
* "port":389
* },
* {
* "address":"ldap2.example.com",
* "port":389
* }
* ]
* }
* }
* }
*
*
* The "server-details" Section for Selecting from a Set of Servers in a
* Fewest Connections Manner
*
* If you have a set of servers that you want to connect to in a manner that
* selects the server with the fewest established connections (at least
* connections created from this specification), the "server-details" value
* should be a JSON object that contains a "fewest-connections-set" field whose
* value is a JSON object that contains a "server" field with an array of JSON
* objects, each of which contains "address" and "port" fields for a target
* server. For example, the following is a valid specification that may be used
* to establish connections across the servers ldap1.example.com,
* ldap2.example.com, and ldap3.example.com, all on port 389:
*
* {
* "server-details":
* {
* "fewest-connections-set":
* {
* "servers":
* [
* {
* "address":"ldap1.example.com",
* "port":389
* },
* {
* "address":"ldap2.example.com",
* "port":389
* },
* {
* "address":"ldap2.example.com",
* "port":389
* }
* ]
* }
* }
* }
*
*
* The "server-details" Section for Selecting from a Set of Servers in a
* Fastest Connect Manner
*
* If you have a set of servers that you want to connect to in a manner that
* attempts to minimize the time required to establish new connections (by
* simultaneously attempting to create connections to every server in the set
* and taking the first connection to be established), the "server-details"
* value should be a JSON object that contains a "fastest-connect-set" field
* whose value is a JSON object that contains a "server" field with an array of
* JSON objects, each of which contains "address" and "port" fields for a target
* server. For example, the following is a valid specification that may be used
* to establish connections across the servers ldap1.example.com,
* ldap2.example.com, and ldap3.example.com, all on port 389:
*
* {
* "server-details":
* {
* "fastest-connect-set":
* {
* "servers":
* [
* {
* "address":"ldap1.example.com",
* "port":389
* },
* {
* "address":"ldap2.example.com",
* "port":389
* },
* {
* "address":"ldap2.example.com",
* "port":389
* }
* ]
* }
* }
* }
*
*
* The "server-details" Section for Selecting from a Set of Servers in a
* Failover Manner
*
* If you have a set of servers that you want to connect to in a manner that
* attempts to consistently establish connections to the same server (as long as
* it is available, and use a consistent failover order if the preferred server
* isn't available), the "server-details" value should be a JSON object that
* contains a "failover-set" field whose value is a JSON object that contains a
* "failover-order" field that provides a list of the details to use in order
* to establish the connections. For example, the following is a valid
* specification that may be used to always try to establish connections to
* ldap1.example.com:389, then try ldap2.example.com:389, and then try
* ldap3.example.com:389:
*
* {
* "server-details":
* {
* "failover-set":
* {
* "failover-order":
* [
* {
* "single-server":
* {
* "address":"ldap1.example.com",
* "port":389
* }
* },
* {
* "single-server":
* {
* "address":"ldap2.example.com",
* "port":389
* }
* },
* {
* "single-server":
* {
* "address":"ldap2.example.com",
* "port":389
* }
* }
* ]
* }
* }
* }
*
* The failover set actually has the ability to perform failover across any kind
* of set. This is a powerful capability that can be useful to define a
* hierarchy of sets, for example for sets referring to servers in different
* data centers (e.g., to prefer connecting to one of the servers in the local
* data center over servers in a remote data center). For example, the
* following is a valid specification that may be used to connect to the server
* with the fewest connections in the east data center, but if no east servers
* are available then it will fail over to select the server with the fewest
* connections in the west data center:
*
* {
* "server-details":
* {
* "failover-set":
* {
* "failover-order":
* [
* {
* "fewest-connections-set":
* {
* "servers":
* [
* {
* "address":"ldap1.east.example.com",
* "port":389
* },
* {
* "address":"ldap2.east.example.com",
* "port":389
* }
* ]
* }
* },
* {
* "fewest-connections-set":
* {
* "servers":
* [
* {
* "address":"ldap1.west.example.com",
* "port":389
* },
* {
* "address":"ldap2.west.example.com",
* "port":389
* }
* ]
* }
* }
* ]
* }
* }
* }
*
* For connections that are part of a connection pool, failover sets have the
* ability to assign a different maximum connection age to connections created
* to a non-preferred server. This can help allow failover connections to be
* migrated back to the preferred server more quickly once that server is
* available again. If you wish to specify an alternate maximum connection age
* for connections to a non-preferred server, you may include the
* "maximum-failover-connection-age-millis" field in the "failover-set" object.
* The value of this field should be a number that is greater than zero to
* specify the maximum age (in milliseconds) for those connections, or a value
* of zero to indicate that they should not be subject to a maximum age. If
* this field is not present, then these connections will be assigned the
* default maximum connection age configured for the pool.
*
* The "communication-security" Section
* This section may be used to provide information about the type of security to
* use to protect communication with directory servers. If the specification
* includes information about multiple servers, then all servers will use the
* same type of security.
*
* If present, the "communication-security" field should have a value that is a
* JSON object. This object must have a "security-type" field with one of the
* following values:
*
* -
* "none" -- Indicates that no communication security should be used. The
* communication will not be encrypted.
*
* -
* "SSL" -- Indicates that all communication should be encrypted with the
* SSL (secure sockets layer) protocol, or more likely its more secure
* successor TLS (transport-layer security) protocol. You can also specify
* a value of "TLS" to use this type of security.
*
* -
* "StartTLS" -- Indicates that the connection will be initially established
* in a non-secure manner, but will be immediately secured with the StartTLS
* extended operation.
*
*
* If you do not wish to use any form of communication security, then the
* "security-type" field is the only one that should be present. For example,
* the following is a valid specification that will use unencrypted
* communication to the server ldap.example.com on port 389:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":389
* }
* },
* "communication-security":
* {
* "security-type":"none"
* }
* }
*
*
* If you wish to secure the communication with either SSL or StartTLS, then
* there are a number of other options that may be specified using fields in the
* "communication-security" object. Those options fall into two basic
* categories: fields that provide information about how the client should
* determine whether to trust the certificate presented by the server, and
* fields that provide information about whether the client should present its
* own certificate to the server. The fields related to client trust include:
*
* -
* "trust-all-certificates" -- Indicates whether the client should blindly
* trust any certificate that the server presents to it. Using blind trust
* is convenient for testing and troubleshooting purposes, but is not
* recommended for production use because it can leave the communication
* susceptible to man-in-the-middle attacks. If this field is present, then
* it should have a boolean value. If it is not present, a default value
* of {@code false} will be assumed. If it is present with a value of
* {@code true}, then the "use-jvm-default-trust-store", "trust-store-file",
* "trust-store-type", "trust-store-pin", and "trust-store-pin-file" fields
* should not be used.
*
* -
* "use-jvm-default-trust-store" -- Indicates that certificates signed by an
* authority listed in the JVM's default set of trusted issuers should be
* trusted. If this field is present, it should have a boolean value. The
* JVM-default trust store may be used on its own or in conjunction with a
* trust store file.
*
* -
* "trust-store-file" -- Specifies the path to a trust store file (in JKS
* or PKCS#12 format). If this is present, then the presented certificate
* will only be trusted if the trust store file contains information about
* all of the issuers in the certificate chain.
*
* -
* "trust-store-type" -- Indicates the format for the trust store file.
* If this is present, then its value should be a string that is either
* "JKS" or "PKCS12". If it is not present, then a default trust store type
* of "JKS" will be assumed.
*
* -
* "trust-store-pin" -- Specifies the PIN that should be used to access the
* contents of the trust store. If this field is present, then its value
* should be a string that is the clear-text PIN. If it is not present,
* then the PIN may be read from a file specified using the
* "trust-store-pin-file" field. If neither the "trust-store-pin" field nor
* the "trust-store-pin-file" field is present, then no PIN will be used
* when attempting to access the trust store (and in many cases, no trust
* store PIN will be required).
*
* -
* "trust-store-pin-file" -- Specifies the path to a file that contains the
* PIN to use to access the contents of the trust store. If this field is
* present, then its value must be the path to a file containing a single
* line, which is the clear-text PIN. If it is not present, then the PIN
* may be obtained from the "trust-store-pin" field. If neither the
* "trust-store-pin" field nor the "trust-store-pin-file" field is present,
* then no PIN will be used when attempting to access the trust store (and
* in many cases, no trust store PIN will be required).
*
* -
* "trust-expired-certificates" -- Indicates whether the client should
* trust certificates that are not yet valid or that have expired. If this
* field is present, then its value must be a boolean. If the value is
* {@code true}, then the certificate validity dates will not be taken into
* consideration when deciding whether to trust a certificate. If the value
* is {@code false}, then any certificate whose validity window does not
* include the current time will not be trusted (even if
* "trust-all-certificates" is {@code true}). If this field is not present,
* then a default of {@code false} will be assumed.
*
* -
* "verify-address-in-certificate" -- Indicates whether the client should
* examine the information contained in the certificate to verify that the
* address the client used to connect to the server matches address
* information contained in the certificate (whether in the CN attribute of
* the certificate's subject, or in a subjectAltName extension of type
* dNSName, uniformResourceIdentifier, or iPAddress). If this field is
* present, then its value must be a boolean. If it is absent, then a
* default value of {@code false} will be assumed.
*
*
* If none of the above fields are provided, then the JVM's default trust
* mechanism will be used. This will generally only trust certificates signed
* by a well-known certification authority.
*
* The fields related to presenting a client certificate include:
*
* -
* "key-store-file" -- Specifies the path to a key store file (in JKS or
* PKCS#12 format) that contains the certificate that the client should
* present to the server. If this is present, then the value must be a
* string that is the path to the key store file. If it is not present,
* then no key store file will be used.
*
* -
* "key-store-type" -- Specifies the type of key store that should be used.
* If this is present, then its value must be a string, and that string
* should be "JKS" or "PKCS12" (if a "key-store-file" value is present), or
* "PKCS11" (if the client certificate is contained in a security module
* accessible via the PKCS#11 API. If this field is not present but a
* "key-store-file" value is provided, then a default value of "JKS" will be
* assumed.
*
* -
* "key-store-pin" -- Specifies the PIN that should be used to access the
* contents of the key store. If this field is present, then its value
* should be a string that is the clear-text PIN. If it is not present,
* then the PIN may be read from a file specified using the
* "key-store-pin-file" field. If neither the "key-store-pin" field nor the
* "key-store-pin-file" field is present, then no PIN will be used when
* attempting to access the key store (although key stores generally require
* a PIN in order to access private key information).
*
* -
* "key-store-pin-file" -- Specifies the path to a file containing the PIN
* that should be used to access the contents of the key store. If this
* field is present, then its value should be the path to a file containing
* the clear-text PIN. If it is not present, then the PIN may be obtained
* from the "key-store-pin" field. If neither the "key-store-pin" field nor
* the "key-store-pin-file" field is present, then no PIN will be used when
* attempting to access the key store (although key stores generally require
* a PIN in order to access private key information).
*
* -
* "client-certificate-alias" -- Specifies the alias (also known as the
* nickname) of the client certificate that should be presented to the
* directory server. If this field is present, then its value should be a
* string that is the alias for a valid certificate that exists in the
* key store. If this field is not present, then the JVM will automatically
* attempt to select a suitable client certificate.
*
*
* If none of the above fields are provided, then the client will not attempt to
* present a certificate to the server.
*
* The following example demonstrates a simple specification that can be used to
* establish SSL-based connections to a single server. The client will trust
* any certificates signed by one of the JVM's default issuers, or any
* certificate contained in or signed by a certificate contained in the
* specified trust store file. As no key store is provided, the client will not
* attempt to present its own certificate to the server.
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":636
* }
* },
* "communication-security":
* {
* "security-type":"SSL",
* "use-jvm-default-trust-store":true,
* "trust-store-file":"/path/to/trust-store.jks",
* "trust-store-type":"JKS",
* "verify-address-in-certificate":true
* }
* }
*
*
* The "communication-security" field is optional, and if it is omitted from the
* specification then it will be equivalent to including it with a
* "security-type" value of "none".
*
* The "connection-options" Section
* The "connection-options" section may be used to provide information about a
* number of settings that may be used in the course of establishing a
* connection, or that may affect the behavior of the connection. The value
* of the "connection-options" field must be a JSON object, and the following
* fields may appear in that object:
*
* -
* "connect-timeout-millis" -- Specifies the maximum length of time (in
* milliseconds) that a connection attempt may block while waiting for the
* connection to be established. If this field is present, then its value
* must be a positive integer to specify the timeout, or a value of zero to
* indicate that no timeout should be enforced by the LDAP SDK. Note that
* the underlying operating system may enforce its own connect timeout, and
* if that value is smaller than the LDAP SDK timeout then the operating
* system's timeout value will be used. If this field is not present, then
* a default of 60000 (1 minute) will be used.
*
* -
* "default-response-timeout-millis" -- Specifies the default timeout (in
* milliseconds) that will be used when waiting for a response to a request
* sent to the server. If this field is present, then its value must be a
* positive integer to specify the timeout, or a value of zero to indicate
* that no timeout should be enforced. If this field is not present, then a
* default of 300000 (5 minutes) will be used. Note that this default
* response timeout can be overridden on a per-request basis using the
* {@code setResponseTimeoutMillis} method provided by the request object.
*
* -
* "follow-referrals" -- Indicates whether the LDAP SDK should automatically
* attempt to follow any referrals that are returned during processing. If
* this field is present, the value should be a boolean. If it is absent,
* then a default of {@code false} will be assumed.
*
* -
* "use-schema" -- Indicates whether the LDAP SDK should attempt to retrieve
* schema information from the directory server upon establishing a
* connection to that server, and should then use that schema information
* for more accurate client-side matching operations. If present, this
* field should have a boolean value. If it is not present, then a default
* value of {@code false} will be used.
*
* -
* "use-synchronous-mode" -- Indicates whether connections should be created
* in synchronous mode, which may be more efficient and less resource
* intensive than connections not created in synchronous mode, but may only
* be used if no attempt will be made to issue asynchronous requests over
* the connection, or to attempt to use the connection simultaneously by
* multiple threads. If this field is present, then its value must be a
* boolean. If it is not present, then a default value of {@code false}
* will be used.
*
*
*
* The "connection-options" field is optional, and if it is omitted from the
* specification then the default values will be used for all options.
*
* The "authentication-details" Section
* The "authentication-details" section may be used to provide information for
* authenticating the connections that are created. The value of the
* "authentication-details" field must be a JSON object, and it must include an
* "authentication-type" field to specify the mechanism to use to authenticate.
* The selected authentication type dictates the other fields that may be
* present in the object.
*
* The "none" Authentication Type
*
* If no authentication should be performed, then the "authentication-type"
* value should be "none". No other fields should be specified in the
* "authentication-details". For example:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":389
* }
* },
* "authentication-details":
* {
* "authentication-type":"none"
* }
* }
*
*
* The "simple" Authentication Type
*
* If you wish to authenticate connections with an LDAP simple bind, then you
* can specify an "authentication-type" value of "simple". The following
* additional fields may be included in the "authentication-details" object for
* this authentication type:
*
* -
* "dn" -- The DN to use to bind to the server. This field must be present,
* and its value must be a string containing the bind DN, or an empty string
* to indicate anonymous simple authentication.
*
* -
* "password" -- The password to use to bind to the server. If this field
* is present, then its value must be a string that contains the clear-text
* password, or an empty string to indicate anonymous simple
* authentication. If it is not provided, then the "password-file" field
* must be used to specify the path to a file containing the bind password.
*
* -
* "password-file" -- The path to a file containing the password to use to
* bind to the server. If this field is present, then its value must be a
* string that represents the path to a file containing a single line that
* contains the clear-text password. If it is not provided, then the
* "password" field must be used to specify the password.
*
*
* For example:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":389
* }
* },
* "authentication-details":
* {
* "authentication-type":"simple",
* "dn":"uid=john.doe,ou=People,dc=example,dc=com",
* "password-file":"/path/to/password.txt"
* }
* }
*
*
* The "CRAM-MD5" Authentication Type
* If you wish to authenticate connections with the CRAM-MD5 SASL mechanism,
* then you can specify an "authentication-type" value of "CRAM-MD5". The
* following additional fields may be included in the "authentication-details"
* object for this authentication type:
*
* -
* "authentication-id" -- The authentication ID to use to bind. This field
* must be present, and its value must be a string containing the
* authentication ID. Authentication ID values typically take the form
* "dn:" followed by the user DN, or "u:" followed by the username.
*
* -
* "password" -- The password to use to bind to the server. If this field
* is present, then its value must be a string that contains the clear-text
* password, or an empty string to indicate anonymous simple
* authentication. If it is not provided, then the "password-file" field
* must be used to specify the path to a file containing the bind password.
*
* -
* "password-file" -- The path to a file containing the password to use to
* bind to the server. If this field is present, then its value must be a
* string that represents the path to a file containing a single line that
* contains the clear-text password. If it is not provided, then the
* "password" field must be used to specify the password.
*
*
* For Example:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":389
* }
* },
* "authentication-details":
* {
* "authentication-type":"CRAM-MD5",
* "authentication-id":"u:john.doe",
* "password-file":"/path/to/password.txt"
* }
* }
*
*
* The "DIGEST-MD5" Authentication Type
* If you wish to authenticate connections with the DIGEST-MD5 SASL mechanism,
* then you can specify an "authentication-type" value of "DIGEST-MD5". The
* following additional fields may be included in the "authentication-details"
* object for this authentication type:
*
* -
* "authentication-id" -- The authentication ID to use to bind. This field
* must be present, and its value must be a string containing the
* authentication ID. Authentication ID values typically take the form
* "dn:" followed by the user DN, or "u:" followed by the username.
*
* -
* "authorization-id" -- The alternate authorization identity to use for the
* connection after the bind has completed. If present, the value must be
* a string containing the desired authorization identity. If this field is
* absent, then no alternate authorization identity will be used.
*
* -
* "password" -- The password to use to bind to the server. If this field
* is present, then its value must be a string that contains the clear-text
* password, or an empty string to indicate anonymous simple
* authentication. If it is not provided, then the "password-file" field
* must be used to specify the path to a file containing the bind password.
*
* -
* "password-file" -- The path to a file containing the password to use to
* bind to the server. If this field is present, then its value must be a
* string that represents the path to a file containing a single line that
* contains the clear-text password. If it is not provided, then the
* "password" field must be used to specify the password.
*
* -
* "realm" -- The realm to use for the bind request. If this field is
* present, then its value must be a string containing the name of the
* realm. If it is not provided, then the realm will not be included in the
* bind request.
*
* -
* "qop" -- The allowed quality of protection value(s) that may be used for
* the bind operation. If this field is present, then its value may be a
* single string or an array of strings indicating the allowed QoP values.
* Allowed values include "auth" (for just authentication), "auth-int" (for
* authentication followed by integrity protection for subsequent
* communication on the connection), and "auth-conf" (for authentication
* followed by confidentiality for subsequent communication on the
* connection). If this field is not present, then a default value of
* "auth" will be assumed.
*
*
* For Example:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":389
* }
* },
* "authentication-details":
* {
* "authentication-type":"DIGEST-MD5",
* "authentication-id":"u:john.doe",
* "password-file":"/path/to/password.txt"
* }
* }
*
*
* The "EXTERNAL" Authentication Type
* If you wish to authenticate connections with the EXTERNAL SASL mechanism,
* then you can specify an "authentication-type" value of "EXTERNAL". The
* connection must be secured with SSL or StartTLS, and the following additional
* field may be present in the "authentication-details" object:
*
* -
* "authorization-id" -- The authorization identity for the bind request.
* If this field is present, then it must be a string containing the
* desired authorization ID, or an empty string if the server should
* determine the authorization identity. If this field is omitted, then
* the bind request will not include any SASL credentials, which may be
* required for use with some servers that cannot handle the possibility of
* an authorization ID in the bind request.
*
*
* For Example:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":636
* }
* },
* "communication-security":
* {
* "security-type":"SSL",
* "use-jvm-default-trust-store":true,
* "trust-store-file":"/path/to/trust-store.jks",
* "trust-store-type":"JKS",
* "verify-address-in-certificate":true
* },
* "authentication-details":
* {
* "authentication-type":"EXTERNAL",
* "authorization-id":""
* }
* }
*
*
* The "GSSAPI" Authentication Type
* If you wish to authenticate connections with the GSSAPI SASL mechanism,
* then you can specify an "authentication-type" value of "GSSAPI". The
* following additional fields may be included in the "authentication-details"
* object for this authentication type:
*
* -
* "authentication-id" -- The authentication ID to use to bind. This field
* must be present, and its value must be a string containing the
* authentication ID. Authentication ID values for a GSSAPI bind request
* are typically the Kerberos principal for the user to authenticate.
*
* -
* "authorization-id" -- The alternate authorization identity to use for the
* connection after the bind has completed. If present, the value must be
* a string containing the desired authorization identity. If this field is
* absent, then no alternate authorization identity will be used.
*
* -
* "password" -- The password to use to bind to the server. If this field
* is present, then its value must be a string that contains the clear-text
* password, or an empty string to indicate anonymous simple
* authentication. If it is not provided, then the "password-file" field
* may be used to specify the path to a file containing the bind password.
* If authentication will require the use of cached credentials, then the
* password may be omitted.
*
* -
* "password-file" -- The path to a file containing the password to use to
* bind to the server. If this field is present, then its value must be a
* string that represents the path to a file containing a single line that
* contains the clear-text password. If it is not provided, then the
* "password" field may be used to specify the password. If authentication
* will require the use of cached credentials, then the password may be
* omitted.
*
* -
* "realm" -- The realm to use for the bind request. If this field is
* present, then its value must be a string containing the name of the
* realm. If it is not provided, then the JVM will attempt to determine the
* realm from the underlying system configuration.
*
* -
* "qop" -- The allowed quality of protection value(s) that may be used for
* the bind operation. If this field is present, then its value may be a
* single string or an array of strings indicating the allowed QoP values.
* Allowed values include "auth" (for just authentication), "auth-int" (for
* authentication followed by integrity protection for subsequent
* communication on the connection), and "auth-conf" (for authentication
* followed by confidentiality for subsequent communication on the
* connection). If this field is not present, then a default value of
* "auth" will be assumed.
*
* -
* "kdc-address" -- The address of the Kerberos KDC to use during
* authentication. If this field is present, then its value must be a
* string containing the target address. If it is not provided, then the
* JVM will attempt to determine the address of the KDC from the underlying
* system configuration.
*
* -
* "config-file-path" -- The path to a JAAS configuration file to use for
* bind processing. If this field is present, then its value must be a
* string containing the path to a valid JAAS configuration file. If it is
* not provided, a temporary JAAS configuration file will be created for the
* bind operation.
*
* -
* "renew-tgt" -- Indicates whether successful authentication should attempt
* to renew the ticket-granting ticket for an existing session. If this
* field is present, then its value must be a boolean. If it is not
* provided, then a default of {@code false} will be assumed.
*
* -
* "require-cached-credentials" -- Indicates whether the authentication
* process should require the use of cached credentials leveraged from an
* existing Kerberos session rather than try to create a new session. if
* this field is present, then its value must be a boolean. If it is not
* provided, then a default of {@code false} will be assumed.
*
* -
* "use-ticket-cache" -- Indicates whether the authentication process should
* leverage a ticket cache in order to leverage an existing Kerberos
* session if the user has already authenticated to the KDC. If present,
* then its value must be a boolean. If it is not provided, then a default
* of {@code true} will be used.
*
* -
* "ticket-cache-path" -- Specifies the path to the Kerberos ticket cache to
* use. If this is provided, its value must be a string with the path to
* the desired ticket cache. If it is not provided, then the JVM will
* attempt to determine the appropriate ticket cache from the underlying
* system configuration.
*
* -
* "use-subject-credentials-only" -- Indicates whether authentication should
* require the client will be required to use credentials that match the
* current subject. If it is provided, then the value must be a boolean.
* If it is not provided, then a default of {@code true} will be assumed.
*
*
* For Example:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":389
* }
* },
* "authentication-details":
* {
* "authentication-type":"GSSAPI",
* "authentication-id":"[email protected]",
* "password-file":"/path/to/password.txt",
* "renew-tgt":true
* }
* }
*
*
* The "PLAIN" Authentication Type
* If you wish to authenticate connections with the PLAIN SASL mechanism,
* then you can specify an "authentication-type" value of "PLAIN". The
* following additional fields may be included in the "authentication-details"
* object for this authentication type:
*
* -
* "authentication-id" -- The authentication ID to use to bind. This field
* must be present, and its value must be a string containing the
* authentication ID. Authentication ID values typically take the form
* "dn:" followed by the user DN, or "u:" followed by the username.
*
* -
* "authorization-id" -- The alternate authorization identity to use for the
* connection after the bind has completed. If present, the value must be
* a string containing the desired authorization identity. If this field is
* absent, then no alternate authorization identity will be used.
*
* -
* "password" -- The password to use to bind to the server. If this field
* is present, then its value must be a string that contains the clear-text
* password, or an empty string to indicate anonymous simple
* authentication. If it is not provided, then the "password-file" field
* must be used to specify the path to a file containing the bind password.
*
* -
* "password-file" -- The path to a file containing the password to use to
* bind to the server. If this field is present, then its value must be a
* string that represents the path to a file containing a single line that
* contains the clear-text password. If it is not provided, then the
* "password" field must be used to specify the password.
*
*
* For Example:
*
* {
* "server-details":
* {
* "single-server":
* {
* "address":"ldap.example.com",
* "port":389
* }
* },
* "authentication-details":
* {
* "authentication-type":"PLAIN",
* "authentication-id":"dn:uid=john.doe,ou=People,dc=example,dc=com",
* "password-file":"/path/to/password.txt"
* }
* }
*
*
* The "authentication-details" field is optional, and if it is omitted from the
* specification then no authentication will be performed.
*
* The "connection-pool-options" Section
* The "connection-pool-options" section may be used to provide information
* about a number of settings that may be used in the course of creating or
* maintaining a connection pool. The value of the "connection-pool-options"
* field must be a JSON object, and the following fields may appear in that
* object:
*
* -
* "create-if-necessary" -- Indicates whether the connection pool should
* create a new connection if one is needed but none are available. If
* present, the value must be a boolean. If it is absent, then a default
* of {@code true} will be assumed.
*
* -
* "health-check-get-entry-dn" -- The DN of an entry that should be
* retrieved during health check processing. If present, the value must be
* a string that represents the DN of the entry to retrieve, or an empty
* string to indicate that the server root DSE should be retrieved. If this
* field is absent, then no entry will be retrieved during health check
* processing.
*
* -
* "health-check-get-entry-maximum-response-time-millis" -- The maximum
* length of time in milliseconds to wait for the entry to be returned in a
* get entry health check. If present, the value must be a positive
* integer. If it is not provided, then a default of 10000 (ten seconds)
* will be used.
*
* -
* "initial-connect-threads" -- The number of threads to use when creating
* the initial set of connections for the pool. If this field is present,
* then the value must be a positive integer, with a value of one indicating
* that connection should be created in a single-threaded manner, and a
* value greater than one indicating that the initial connections should be
* established in parallel. If it is not provided, then a default of one
* will be used.
*
* -
* "invoke-background-health-checks" -- Indicates whether the connection
* pool should periodically invoke health check processing on idle
* connections. If this field is present, then its value must be a boolean.
* If it is not present, then a default of {@code true} will be assumed.
*
* -
* "invoke-checkout-health-checks" -- Indicates whether the connection pool
* should invoke health check processing on connections just before they are
* checked out of the pool to ensure that they are valid. If this field is
* present, then its value must be a boolean. If it is not present, then a
* default of {@code false} will be assumed.
*
* -
* "invoke-create-health-checks" -- Indicates whether the connection pool
* should invoke health check processing on connections just after they are
* created. If this field is present, then its value must be a boolean. If
* it is not present, then a default of {@code false} will be assumed.
*
* -
* "invoke-authentication-health-checks" -- Indicates whether the connection
* pool should invoke health check processing on connections just after they
* have been authenticated. This includes after a successful bind on a
* newly-created connection, and after calls to the connection pool's
* {@code bindAndRevertAuthentication} and
* {@code releaseAndReAuthenticateConnection} methods. If this field is
* present, then its value must be a boolean. If it is not present, then a
* default of {@code false} will be assumed.
*
* -
* "invoke-exception-health-checks" -- Indicates whether the connection pool
* should invoke health check processing on connections just after an
* exception is caught that might indicate that the connection is no longer
* valid. Note that this only applies to exceptions caught during
* operations processed directly against the connection pool and not to
* exceptions caught on a connection checked out of the pool. If this field
* is present, then its value must be a boolean. If it is not present, then
* a default of {@code true} will be assumed.
*
* -
* "invoke-release-health-checks" -- Indicates whether the connection pool
* should invoke health check processing on connections just before they are
* released back to the pool to ensure that they are valid. If this field
* is present, then its value must be a boolean. If it is not present, then
* a default of {@code false} will be assumed.
*
* -
* "maximum-connection-age-millis" -- Specifies the maximum length of time
* (in milliseconds) that a connection should be allowed to remain
* established before it is eligible to be closed and replaced with a
* newly-created connection. If present, then the value must be a positive
* integer to specify the maximum age, or zero to indicate that no maximum
* age should be applied. If it is not present, then a default value of
* zero will be used.
*
* -
* "maximum-defunct-replacement-connection-age-millis" -- Specifies the
* maximum connection age (in milliseconds) that should be used for
* connections created to replace a defunct connection. If present, then
* the value must be a positive integer to specify the maximum age, or zero
* to indicate that no maximum age should be applied. If it is not present,
* then the value of the "maximum-connection-age-millis" field will be used
* for connections created as replacements for defunct connections.
*
* -
* "maximum-wait-time-millis" -- Specifies the maximum length of time (in
* milliseconds) that the pool should wait for a connection to be released
* if one is needed but none are immediately available. If present, then
* this value must be a positive integer to specify the length of time to
* wait, or zero to indicate that it should not wait at all. If it is not
* provided, then a default value of zero will be used.
*
* -
* "retry-failed-operations-due-to-invalid-connections" -- Indicates whether
* the pool should automatically attempt to retry operations attempted
* directly against the pool (but not for connections checked out of the
* pool) if the initial attempt fails in a manner that may indicate that the
* connection is no longer valid. If this field is present, then its value
* may be either a boolean to indicate whether to enable retry for all types
* of operations or no operations, or it may be an array of strings
* indicating the operation types ("add", "bind", "compare", "delete",
* "extended", "modify", "modify-dn", or "search") that should be retried
* in the event of a failure. If this field is not present, then no
* automatic retry will be attempted.
*
*
*
* The "connection-pool-options" field is optional, and if it is omitted from
* the specification then the default values will be used for all options.
*/
@NotMutable()
@ThreadSafety(level=ThreadSafetyLevel.COMPLETELY_THREADSAFE)
public final class LDAPConnectionDetailsJSONSpecification
{
/**
* The name of the top-level field that may be used to provide information to
* use to authenticate connections to the server.
*/
@NotNull static final String FIELD_AUTHENTICATION_DETAILS =
"authentication-details";
/**
* The name of the top-level field that may be used to provide information
* about the type of communication security that should be used.
*/
@NotNull static final String FIELD_COMMUNICATION_SECURITY =
"communication-security";
/**
* The name of the top-level field that may be used to provide information
* about options that should be set when establishing connections.
*/
@NotNull static final String FIELD_CONNECTION_OPTIONS = "connection-options";
/**
* The name of the top-level field that may be used to provide information
* about options that should be set when creating a connection pool.
*/
@NotNull static final String FIELD_CONNECTION_POOL_OPTIONS =
"connection-pool-options";
/**
* The name of the top-level field that may be used to provide information
* about the directory server(s) to which the connection should be
* established.
*/
@NotNull static final String FIELD_SERVER_DETAILS = "server-details";
// The bind request that will be used to authenticate connections.
@Nullable private final BindRequest bindRequest;
// The processed connection pool options portion of the specification.
@NotNull private final ConnectionPoolOptions connectionPoolOptionsSpec;
// The processed security options portion of the specification.
@NotNull private final SecurityOptions securityOptionsSpec;
// The server set that will be used to create connections.
@NotNull private final ServerSet serverSet;
/**
* Creates a new LDAP connection details object from the specification
* contained in the provided JSON object.
*
* @param connectionDetailsObject The JSON object that contains information
* that may be used to create LDAP
* connections.
*
* @throws LDAPException If the provided JSON object does not contain a
* valid connection details specification.
*/
public LDAPConnectionDetailsJSONSpecification(
@NotNull final JSONObject connectionDetailsObject)
throws LDAPException
{
validateTopLevelFields(connectionDetailsObject);
try
{
securityOptionsSpec = new SecurityOptions(connectionDetailsObject);
}
catch (final LDAPException le)
{
Debug.debugException(le);
throw new LDAPException(le.getResultCode(),
ERR_LDAP_SPEC_ERROR_PROCESSING_FIELD.get(
FIELD_COMMUNICATION_SECURITY, le.getMessage()),
le);
}
final ConnectionOptions connectionOptionsSpec;
try
{
connectionOptionsSpec = new ConnectionOptions(connectionDetailsObject);
}
catch (final LDAPException le)
{
Debug.debugException(le);
throw new LDAPException(le.getResultCode(),
ERR_LDAP_SPEC_ERROR_PROCESSING_FIELD.get(
FIELD_CONNECTION_OPTIONS, le.getMessage()),
le);
}
try
{
final ServerDetails serverDetailsSpec =
new ServerDetails(connectionDetailsObject, securityOptionsSpec,
connectionOptionsSpec);
serverSet = serverDetailsSpec.getServerSet();
}
catch (final LDAPException le)
{
Debug.debugException(le);
throw new LDAPException(le.getResultCode(),
ERR_LDAP_SPEC_ERROR_PROCESSING_FIELD.get(
FIELD_SERVER_DETAILS, le.getMessage()),
le);
}
try
{
final AuthenticationDetails authenticationDetailsSpec =
new AuthenticationDetails(connectionDetailsObject);
bindRequest = authenticationDetailsSpec.getBindRequest();
}
catch (final LDAPException le)
{
Debug.debugException(le);
throw new LDAPException(le.getResultCode(),
ERR_LDAP_SPEC_ERROR_PROCESSING_FIELD.get(
FIELD_AUTHENTICATION_DETAILS, le.getMessage()),
le);
}
try
{
connectionPoolOptionsSpec =
new ConnectionPoolOptions(connectionDetailsObject);
}
catch (final LDAPException le)
{
Debug.debugException(le);
throw new LDAPException(le.getResultCode(),
ERR_LDAP_SPEC_ERROR_PROCESSING_FIELD.get(
FIELD_CONNECTION_POOL_OPTIONS, le.getMessage()),
le);
}
}
/**
* Creates a new LDAP connection details object from the specification
* contained in the JSON object represented by the given string.
*
* @param jsonString The string representation of the JSON object that
* contains information that may be used to create LDAP
* connections.
*
* @return The LDAP connection details object parsed from the provided
* JSON object string.
*
* @throws JSONException If the provided string cannot be parsed as a valid
* JSON object.
*
* @throws LDAPException If the parsed JSON object does not contain a valid
* connection details specification.
*/
@NotNull()
public static LDAPConnectionDetailsJSONSpecification fromString(
@NotNull final String jsonString)
throws JSONException, LDAPException
{
return new LDAPConnectionDetailsJSONSpecification(
new JSONObject(jsonString));
}
/**
* Creates a new LDAP connection details object from the specification
* contained in the JSON object read from the indicated file.
*
* @param path The path to a file containing a JSON object with information
* that may be used to create LDAP connections.
*
* @return The LDAP connection details object parsed from the information in
* the specified file.
*
* @throws IOException If a problem is encountered while reading from the
* specified file.
*
* @throws JSONException If the contents of the specified file cannot be
* parsed as a valid JSON object.
*
* @throws LDAPException If the parsed JSON object does not contain a valid
* connection details specification.
*/
@NotNull()
public static LDAPConnectionDetailsJSONSpecification fromFile(
@NotNull final String path)
throws IOException, JSONException, LDAPException
{
return fromFile(new File(path));
}
/**
* Creates a new LDAP connection details object from the specification
* contained in the JSON object read from the indicated file.
*
* @param file The file containing a JSON object with information that may
* be used to create LDAP connections.
*
* @return The LDAP connection details object parsed from the information in
* the specified file.
*
* @throws IOException If a problem is encountered while reading from the
* specified file.
*
* @throws JSONException If the contents of the specified file cannot be
* parsed as a valid JSON object.
*
* @throws LDAPException If the parsed JSON object does not contain a valid
* connection details specification.
*/
@NotNull()
public static LDAPConnectionDetailsJSONSpecification fromFile(
@NotNull final File file)
throws IOException, JSONException, LDAPException
{
return fromInputStream(new FileInputStream(file));
}
/**
* Creates a new LDAP connection details object from the specification
* contained in the JSON object read from the provided input stream. The
* entire contents of the stream must be exactly one JSON object. Because the
* input stream will be fully read, it will always be closed by this method.
*
* @param inputStream The input stream from which to read a JSON object with
* information that may be used to create LDAP
* connections. The entire contents of the stream must
* be exactly one JSON object. Because the input stream
* will be fully read, it will always be closed by this
* method.
*
* @return The LDAP connection details object parsed from the information
* read from the provided input stream.
*
* @throws IOException If a problem is encountered while reading from the
* provided input stream.
*
* @throws JSONException If the contents of the specified file cannot be
* parsed as a valid JSON object.
*
* @throws LDAPException If the parsed JSON object does not contain a valid
* connection details specification.
*/
@NotNull()
public static LDAPConnectionDetailsJSONSpecification fromInputStream(
@NotNull final InputStream inputStream)
throws IOException, JSONException, LDAPException
{
try
{
final ByteStringBuffer b = new ByteStringBuffer();
final byte[] readBuffer = new byte[8192];
while (true)
{
final int bytesRead = inputStream.read(readBuffer);
if (bytesRead < 0)
{
break;
}
else
{
b.append(readBuffer, 0, bytesRead);
}
}
return new LDAPConnectionDetailsJSONSpecification(
new JSONObject(b.toString()));
}
finally
{
inputStream.close();
}
}
/**
* Retrieves the server set that may be used to create new connections based
* on the JSON specification.
*
* @return The server set that may be used to create new connections based on
* the JSON specification.
*/
@NotNull()
public ServerSet getServerSet()
{
return serverSet;
}
/**
* Retrieves the bind request that may be used to authenticate connections
* created from the JSON specification.
*
* @return The bind request that may be used to authenticate connections
* created from the JSON specification, or {@code null} if the
* connections should be unauthenticated.
*/
@Nullable()
public BindRequest getBindRequest()
{
return bindRequest;
}
/**
* Creates a new LDAP connection based on the JSON specification. The
* connection will be authenticated if appropriate.
*
* @return The LDAP connection that was created.
*
* @throws LDAPException If a problem is encountered while trying to
* establish or authenticate the connection.
*/
@NotNull()
public LDAPConnection createConnection()
throws LDAPException
{
final LDAPConnection connection = createUnauthenticatedConnection();
if (bindRequest != null)
{
try
{
connection.bind(bindRequest);
}
catch (final LDAPException le)
{
Debug.debugException(le);
connection.close();
throw le;
}
}
return connection;
}
/**
* Creates a new LDAP connection based on the JSON specification. No
* authentication will be performed on the connection.
*
* @return The LDAP connection that was created.
*
* @throws LDAPException If a problem is encountered while trying to
* establish the connection.
*/
@NotNull()
public LDAPConnection createUnauthenticatedConnection()
throws LDAPException
{
return serverSet.getConnection();
}
/**
* Creates a new LDAP connection pool based on the JSON specification. The
* pooled connections will be authenticated if appropriate.
*
* @param initialConnections The number of connections that should be
* established at the time the pool is created.
* @param maximumConnections The maximum number of connections that should
* be available in the pool at any time.
*
* @return The LDAP connection pool that was created.
*
* @throws LDAPException If a problem is encountered while attempting to
* create the connection pool.
*/
@NotNull()
public LDAPConnectionPool createConnectionPool(final int initialConnections,
final int maximumConnections)
throws LDAPException
{
final LDAPConnectionPool connectionPool = new LDAPConnectionPool(serverSet,
bindRequest, initialConnections, maximumConnections,
connectionPoolOptionsSpec.getInitialConnectThreads(),
securityOptionsSpec.getPostConnectProcessor(), false,
connectionPoolOptionsSpec.getHealthCheck());
connectionPoolOptionsSpec.applyConnectionPoolSettings(connectionPool);
return connectionPool;
}
/**
* Creates a new LDAP connection pool based on the JSON specification. No
* authentication will be used for connections that are part of the pool.
*
* @param initialConnections The number of connections that should be
* established at the time the pool is created.
* @param maximumConnections The maximum number of connections that should
* be available in the pool at any time.
*
* @return The LDAP connection pool that was created.
*
* @throws LDAPException If a problem is encountered while attempting to
* create the connection pool.
*/
@NotNull()
public LDAPConnectionPool createUnauthenticatedConnectionPool(
final int initialConnections,
final int maximumConnections)
throws LDAPException
{
final LDAPConnectionPool connectionPool = new LDAPConnectionPool(serverSet,
null, initialConnections, maximumConnections,
connectionPoolOptionsSpec.getInitialConnectThreads(),
securityOptionsSpec.getPostConnectProcessor(), false,
connectionPoolOptionsSpec.getHealthCheck());
connectionPoolOptionsSpec.applyConnectionPoolSettings(connectionPool);
return connectionPool;
}
/**
* Validates the top-level fields in the provided JSON object to ensure that
* all required fields are present and no unrecognized fields are present.
*
* @param o The JSON object to validate.
*
* @throws LDAPException If there is a problem with the set of top-level
* fields in the provided JSON object.
*/
private static void validateTopLevelFields(@NotNull final JSONObject o)
throws LDAPException
{
boolean serverDetailsProvided = false;
for (final String s : o.getFields().keySet())
{
if (s.equals(FIELD_SERVER_DETAILS))
{
// This is a required top-level field.
serverDetailsProvided = true;
}
else if (s.equals(FIELD_CONNECTION_OPTIONS) ||
s.equals(FIELD_COMMUNICATION_SECURITY) ||
s.equals(FIELD_AUTHENTICATION_DETAILS) ||
s.equals(FIELD_CONNECTION_POOL_OPTIONS))
{
// These are optional top-level fields.
}
else
{
// This is not a valid top-level field.
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_UNRECOGNIZED_TOP_LEVEL_FIELD.get(s));
}
}
if (! serverDetailsProvided)
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_MISSING_SERVER_DETAILS.get(FIELD_SERVER_DETAILS));
}
}
/**
* Validates that the set of fields contained in the JSON object that is the
* value of the indicated field.
*
* @param o The JSON object to validate.
* @param f The name of the field whose value is the provided JSON object.
* @param a The names of the fields that are allowed to be present.
*
* @throws LDAPException If the provided JSON object contains any fields
* that are not contained in the allowed set.
*/
static void validateAllowedFields(@NotNull final JSONObject o,
@NotNull final String f,
@NotNull final String... a)
throws LDAPException
{
final HashSet s = new HashSet<>(Arrays.asList(a));
for (final String n : o.getFields().keySet())
{
if (! s.contains(n))
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_UNRECOGNIZED_FIELD.get(n, f));
}
}
}
/**
* Retrieves the value of the specified JSON object field as a boolean.
*
* @param o The object from which to retrieve the boolean value.
* @param f The name of the field to retrieve.
* @param d The default value to return if the specified field does not
* exist.
*
* @return The requested boolean value.
*
* @throws LDAPException If the specified field exists but is not a boolean.
*/
static boolean getBoolean(@NotNull final JSONObject o,
@NotNull final String f, final boolean d)
throws LDAPException
{
final JSONValue v = o.getField(f);
if (v == null)
{
return d;
}
if (v instanceof JSONBoolean)
{
return ((JSONBoolean) v).booleanValue();
}
else
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_NOT_BOOLEAN.get(f));
}
}
/**
* Retrieves the value of the specified JSON object field as an integer.
*
* @param o The object from which to retrieve the integer value.
* @param f The name of the field to retrieve.
* @param d The default value to return if the specified field does not
* exist.
* @param n The minimum allowed value for the field, if any.
* @param x The maximum allowed value for the field, if any.
*
* @return The requested integer value.
*
* @throws LDAPException If the specified field exists but is not an
* integer.
*/
@Nullable()
static Integer getInt(@NotNull final JSONObject o, @NotNull final String f,
@Nullable final Integer d, @Nullable final Integer n,
@Nullable final Integer x)
throws LDAPException
{
final JSONValue v = o.getField(f);
if (v == null)
{
return d;
}
if (v instanceof JSONNumber)
{
try
{
final int i =((JSONNumber) v).getValue().intValueExact();
if ((n != null) && (i < n))
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_BELOW_MIN.get(f, n));
}
if ((x != null) && (i > x))
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_ABOVE_MAX.get(f, n));
}
return i;
}
catch (final LDAPException le)
{
Debug.debugException(le);
throw le;
}
catch (final Exception e)
{
Debug.debugException(e);
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_NOT_INTEGER.get(f), e);
}
}
else
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_NOT_INTEGER.get(f));
}
}
/**
* Retrieves the value of the specified JSON object field as a long.
*
* @param o The object from which to retrieve the long value.
* @param f The name of the field to retrieve.
* @param d The default value to return if the specified field does not
* exist.
* @param n The minimum allowed value for the field, if any.
* @param x The maximum allowed value for the field, if any.
*
* @return The requested long value.
*
* @throws LDAPException If the specified field exists but is not a long.
*/
@Nullable()
static Long getLong(@NotNull final JSONObject o, @NotNull final String f,
@Nullable final Long d, @Nullable final Long n,
@Nullable final Long x)
throws LDAPException
{
final JSONValue v = o.getField(f);
if (v == null)
{
return d;
}
if (v instanceof JSONNumber)
{
try
{
final long l =((JSONNumber) v).getValue().longValueExact();
if ((n != null) && (l < n))
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_BELOW_MIN.get(f, n));
}
if ((x != null) && (l > x))
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_ABOVE_MAX.get(f, n));
}
return l;
}
catch (final LDAPException le)
{
Debug.debugException(le);
throw le;
}
catch (final Exception e)
{
Debug.debugException(e);
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_NOT_INTEGER.get(f), e);
}
}
else
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_NOT_INTEGER.get(f));
}
}
/**
* Retrieves the value of the specified JSON object field as an object.
*
* @param o The object from which to retrieve the object value.
* @param f The name of the field to retrieve.
*
* @return The requested object value.
*
* @throws LDAPException If the specified field exists but is not an object.
*/
@Nullable()
static JSONObject getObject(@NotNull final JSONObject o,
@NotNull final String f)
throws LDAPException
{
final JSONValue v = o.getField(f);
if (v == null)
{
return null;
}
if (v instanceof JSONObject)
{
return (JSONObject) v;
}
else
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_NOT_OBJECT.get(f));
}
}
/**
* Retrieves the value of the specified JSON object field as a string.
*
* @param o The object from which to retrieve the string value.
* @param f The name of the field to retrieve.
* @param d The default value to return if the specified field does not
* exist.
*
* @return The requested string value.
*
* @throws LDAPException If the specified field exists but is not a string.
*/
@Nullable()
static String getString(@NotNull final JSONObject o, @NotNull final String f,
@Nullable final String d)
throws LDAPException
{
final JSONValue v = o.getField(f);
if (v == null)
{
return d;
}
if (v instanceof JSONString)
{
return ((JSONString) v).stringValue();
}
else
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_VALUE_NOT_STRING.get(f));
}
}
/**
* Retrieves a string value read from the specified file. The file must
* contain exactly one line, and that line must not be empty.
*
* @param path The path to the file from which to read the string.
* @param fieldName The name of the field from which the path was obtained.
*
* @return The string read from the specified file.
*
* @throws LDAPException If a problem is encountered while reading from the
* specified file, if the file does not contain
* exactly one line, or if the line contained in the
* file is empty.
*/
@NotNull()
static String getStringFromFile(@NotNull final String path,
@NotNull final String fieldName)
throws LDAPException
{
BufferedReader r = null;
try
{
r = new BufferedReader(new FileReader(path));
final String line = r.readLine();
if (line == null)
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_READ_FILE_EMPTY.get(path, fieldName));
}
if (r.readLine() != null)
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_READ_FILE_MULTIPLE_LINES.get(path, fieldName));
}
if (line.isEmpty())
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_READ_FILE_EMPTY_LINE.get(path, fieldName));
}
return line;
}
catch (final LDAPException le)
{
Debug.debugException(le);
throw le;
}
catch (final Exception e)
{
Debug.debugException(e);
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_READ_FILE_ERROR.get(path, fieldName,
StaticUtils.getExceptionMessage(e)),
e);
}
finally
{
if (r != null)
{
try
{
r.close();
}
catch (final Exception e)
{
Debug.debugException(e);
}
}
}
}
/**
* Verifies that none of the indicated fields exist in the provided JSON
* object because they would conflict with the specified existing field.
*
* @param o The JSON object to examine.
* @param existingField The name of a field known to be present in the
* JSON object that cannot coexist with the
* indicated conflicting fields.
* @param conflictingFields The names of the fields that cannot be used in
* conjunction with the specified existing field.
*
* @throws LDAPException If the provided JSON object has one or more fields
* that conflict with the specified existing field.
*/
static void rejectConflictingFields(@NotNull final JSONObject o,
@NotNull final String existingField,
@NotNull final String... conflictingFields)
throws LDAPException
{
for (final String fieldName : conflictingFields)
{
if (o.getField(fieldName) != null)
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_CONFLICTING_FIELD.get(fieldName, existingField));
}
}
}
/**
* Verifies that none of the indicated fields exist in the provided JSON
* object because they can only be provided if the specified required field is
* present.
*
* @param o The JSON object to examine.
* @param requiredField The name of a field known to be missing from the
* JSON object, but must be present to allow any of
* the indicated dependent fields to be provided.
* @param dependentFields The names of the fields that can only be present
* if the specified required field is present.
*
* @throws LDAPException If the provided JSON object has one or more
* unresolved dependencies.
*/
static void rejectUnresolvedDependency(@NotNull final JSONObject o,
@NotNull final String requiredField,
@NotNull final String... dependentFields)
throws LDAPException
{
for (final String fieldName : dependentFields)
{
if (o.getField(fieldName) != null)
{
throw new LDAPException(ResultCode.PARAM_ERROR,
ERR_LDAP_SPEC_MISSING_DEPENDENT_FIELD.get(fieldName,
requiredField));
}
}
}
}