com.lowagie.text.pdf.BidiOrder Maven / Gradle / Ivy
Show all versions of itext Show documentation
package com.lowagie.text.pdf;
/*
* Copyright 2003 Paulo Soares
*
* The contents of this file are subject to the Mozilla Public License Version 1.1
* (the "License"); you may not use this file except in compliance with the License.
* You may obtain a copy of the License at http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the License.
*
* The Original Code is 'iText, a free JAVA-PDF library'.
*
* The Initial Developer of the Original Code is Bruno Lowagie. Portions created by
* the Initial Developer are Copyright (C) 1999, 2000, 2001, 2002 by Bruno Lowagie.
* All Rights Reserved.
* Co-Developer of the code is Paulo Soares. Portions created by the Co-Developer
* are Copyright (C) 2000, 2001, 2002 by Paulo Soares. All Rights Reserved.
*
* Contributor(s): all the names of the contributors are added in the source code
* where applicable.
*
* Alternatively, the contents of this file may be used under the terms of the
* LGPL license (the "GNU LIBRARY GENERAL PUBLIC LICENSE"), in which case the
* provisions of LGPL are applicable instead of those above. If you wish to
* allow use of your version of this file only under the terms of the LGPL
* License and not to allow others to use your version of this file under
* the MPL, indicate your decision by deleting the provisions above and
* replace them with the notice and other provisions required by the LGPL.
* If you do not delete the provisions above, a recipient may use your version
* of this file under either the MPL or the GNU LIBRARY GENERAL PUBLIC LICENSE.
*
* This library is free software; you can redistribute it and/or modify it
* under the terms of the MPL as stated above or under the terms of the GNU
* Library General Public License as published by the Free Software Foundation;
* either version 2 of the License, or any later version.
*
* This library is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU Library general Public License for more
* details.
*
* If you didn't download this code from the following link, you should check if
* you aren't using an obsolete version:
* http://www.lowagie.com/iText/
*/
/*
* (C) Copyright IBM Corp. 1999, All Rights Reserved
*
* version 1.1
*/
/*
* As stated in the Javadoc comments below, materials from Unicode.org
* are used in this class. The following license applies to these materials:
* http://www.unicode.org/copyright.html#Exhibit1
*
* EXHIBIT 1
* UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND SOFTWARE
*
* Unicode Data Files include all data files under the directories
* http://www.unicode.org/Public/, http://www.unicode.org/reports/,
* and http://www.unicode.org/cldr/data/ .
* Unicode Software includes any source code published in the Unicode Standard
* or under the directories http://www.unicode.org/Public/, http://www.unicode.org/reports/,
* and http://www.unicode.org/cldr/data/.
*
* NOTICE TO USER: Carefully read the following legal agreement. BY DOWNLOADING,
* INSTALLING, COPYING OR OTHERWISE USING UNICODE INC.'S DATA FILES ("DATA FILES"),
* AND/OR SOFTWARE ("SOFTWARE"), YOU UNEQUIVOCALLY ACCEPT, AND AGREE TO BE BOUND BY,
* ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE, DO NOT
* DOWNLOAD, INSTALL, COPY, DISTRIBUTE OR USE THE DATA FILES OR SOFTWARE.
*
* COPYRIGHT AND PERMISSION NOTICE
* Copyright (C) 1991-2007 Unicode, Inc. All rights reserved. Distributed under
* the Terms of Use in http://www.unicode.org/copyright.html.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of the Unicode data files and any associated documentation (the "Data Files")
* or Unicode software and any associated documentation (the "Software") to deal
* in the Data Files or Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, and/or sell copies
* of the Data Files or Software, and to permit persons to whom the Data Files
* or Software are furnished to do so, provided that (a) the above copyright
* notice(s) and this permission notice appear with all copies of the Data Files
* or Software, (b) both the above copyright notice(s) and this permission notice
* appear in associated documentation, and (c) there is clear notice in each
* modified Data File or in the Software as well as in the documentation associated
* with the Data File(s) or Software that the data or software has been modified.
*
* THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
* IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE
* LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
* DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA FILES OR SOFTWARE.
*
* Except as contained in this notice, the name of a copyright holder shall not
* be used in advertising or otherwise to promote the sale, use or other dealings
* in these Data Files or Software without prior written authorization of the
* copyright holder.
*/
/**
* Reference implementation of the Unicode 3.0 Bidi algorithm.
*
*
* This implementation is not optimized for performance. It is intended
* as a reference implementation that closely follows the specification
* of the Bidirectional Algorithm in The Unicode Standard version 3.0.
*
* Input:
* There are two levels of input to the algorithm, since clients may prefer
* to supply some information from out-of-band sources rather than relying on
* the default behavior.
*
* - unicode type array
*
- unicode type array, with externally supplied base line direction
*
* Output:
* Output is separated into several stages as well, to better enable clients
* to evaluate various aspects of implementation conformance.
*
* - levels array over entire paragraph
*
- reordering array over entire paragraph
*
- levels array over line
*
- reordering array over line
*
* Note that for conformance, algorithms are only required to generate correct
* reordering and character directionality (odd or even levels) over a line.
* Generating identical level arrays over a line is not required. Bidi
* explicit format codes (LRE, RLE, LRO, RLO, PDF) and BN can be assigned
* arbitrary levels and positions as long as the other text matches.
*
* As the algorithm is defined to operate on a single paragraph at a time,
* this implementation is written to handle single paragraphs. Thus
* rule P1 is presumed by this implementation-- the data provided to the
* implementation is assumed to be a single paragraph, and either contains no
* 'B' codes, or a single 'B' code at the end of the input. 'B' is allowed
* as input to illustrate how the algorithm assigns it a level.
*
* Also note that rules L3 and L4 depend on the rendering engine that uses
* the result of the bidi algorithm. This implementation assumes that the
* rendering engine expects combining marks in visual order (e.g. to the
* left of their base character in RTL runs) and that it adjust the glyphs
* used to render mirrored characters that are in RTL runs so that they
* render appropriately.
*
* @author Doug Felt
*/
import com.lowagie.text.error_messages.MessageLocalization;
public final class BidiOrder {
private byte[] initialTypes;
private byte[] embeddings; // generated from processing format codes
private byte paragraphEmbeddingLevel = -1; // undefined
private int textLength; // for convenience
private byte[] resultTypes; // for paragraph, not lines
private byte[] resultLevels; // for paragraph, not lines
// The bidi types
/** Left-to-right*/
public static final byte L = 0;
/** Left-to-Right Embedding */
public static final byte LRE = 1;
/** Left-to-Right Override */
public static final byte LRO = 2;
/** Right-to-Left */
public static final byte R = 3;
/** Right-to-Left Arabic */
public static final byte AL = 4;
/** Right-to-Left Embedding */
public static final byte RLE = 5;
/** Right-to-Left Override */
public static final byte RLO = 6;
/** Pop Directional Format */
public static final byte PDF = 7;
/** European Number */
public static final byte EN = 8;
/** European Number Separator */
public static final byte ES = 9;
/** European Number Terminator */
public static final byte ET = 10;
/** Arabic Number */
public static final byte AN = 11;
/** Common Number Separator */
public static final byte CS = 12;
/** Non-Spacing Mark */
public static final byte NSM = 13;
/** Boundary Neutral */
public static final byte BN = 14;
/** Paragraph Separator */
public static final byte B = 15;
/** Segment Separator */
public static final byte S = 16;
/** Whitespace */
public static final byte WS = 17;
/** Other Neutrals */
public static final byte ON = 18;
/** Minimum bidi type value. */
public static final byte TYPE_MIN = 0;
/** Maximum bidi type value. */
public static final byte TYPE_MAX = 18;
//
// Input
//
/**
* Initialize using an array of direction types. Types range from TYPE_MIN to TYPE_MAX inclusive
* and represent the direction codes of the characters in the text.
*
* @param types the types array
*/
public BidiOrder(byte[] types) {
validateTypes(types);
this.initialTypes = (byte[])types.clone(); // client type array remains unchanged
runAlgorithm();
}
/**
* Initialize using an array of direction types and an externally supplied paragraph embedding level.
* The embedding level may be -1, 0, or 1. -1 means to apply the default algorithm (rules P2 and P3),
* 0 is for LTR paragraphs, and 1 is for RTL paragraphs.
*
* @param types the types array
* @param paragraphEmbeddingLevel the externally supplied paragraph embedding level.
*/
public BidiOrder(byte[] types, byte paragraphEmbeddingLevel) {
validateTypes(types);
validateParagraphEmbeddingLevel(paragraphEmbeddingLevel);
this.initialTypes = (byte[])types.clone(); // client type array remains unchanged
this.paragraphEmbeddingLevel = paragraphEmbeddingLevel;
runAlgorithm();
}
public BidiOrder(char text[], int offset, int length, byte paragraphEmbeddingLevel) {
initialTypes = new byte[length];
for (int k = 0; k < length; ++k) {
initialTypes[k] = rtypes[text[offset + k]];
}
validateParagraphEmbeddingLevel(paragraphEmbeddingLevel);
this.paragraphEmbeddingLevel = paragraphEmbeddingLevel;
runAlgorithm();
}
public final static byte getDirection(char c) {
return rtypes[c];
}
/**
* The algorithm.
* Does not include line-based processing (Rules L1, L2).
* These are applied later in the line-based phase of the algorithm.
*/
private void runAlgorithm() {
textLength = initialTypes.length;
// Initialize output types.
// Result types initialized to input types.
resultTypes = (byte[])initialTypes.clone();
// 1) determining the paragraph level
// Rule P1 is the requirement for entering this algorithm.
// Rules P2, P3.
// If no externally supplied paragraph embedding level, use default.
if (paragraphEmbeddingLevel == -1) {
determineParagraphEmbeddingLevel();
}
// Initialize result levels to paragraph embedding level.
resultLevels = new byte[textLength];
setLevels(0, textLength, paragraphEmbeddingLevel);
// 2) Explicit levels and directions
// Rules X1-X8.
determineExplicitEmbeddingLevels();
// Rule X9.
textLength = removeExplicitCodes();
// Rule X10.
// Run remainder of algorithm one level run at a time
byte prevLevel = paragraphEmbeddingLevel;
int start = 0;
while (start < textLength) {
byte level = resultLevels[start];
byte prevType = typeForLevel(Math.max(prevLevel, level));
int limit = start + 1;
while (limit < textLength && resultLevels[limit] == level) {
++limit;
}
byte succLevel = limit < textLength ? resultLevels[limit] : paragraphEmbeddingLevel;
byte succType = typeForLevel(Math.max(succLevel, level));
// 3) resolving weak types
// Rules W1-W7.
resolveWeakTypes(start, limit, level, prevType, succType);
// 4) resolving neutral types
// Rules N1-N3.
resolveNeutralTypes(start, limit, level, prevType, succType);
// 5) resolving implicit embedding levels
// Rules I1, I2.
resolveImplicitLevels(start, limit, level, prevType, succType);
prevLevel = level;
start = limit;
}
// Reinsert explicit codes and assign appropriate levels to 'hide' them.
// This is for convenience, so the resulting level array maps 1-1
// with the initial array.
// See the implementation suggestions section of TR#9 for guidelines on
// how to implement the algorithm without removing and reinserting the codes.
textLength = reinsertExplicitCodes(textLength);
}
/**
* 1) determining the paragraph level.
*
* Rules P2, P3.
*
* At the end of this function, the member variable paragraphEmbeddingLevel is set to either 0 or 1.
*/
private void determineParagraphEmbeddingLevel() {
byte strongType = -1; // unknown
// Rule P2.
for (int i = 0; i < textLength; ++i) {
byte t = resultTypes[i];
if (t == L || t == AL || t == R) {
strongType = t;
break;
}
}
// Rule P3.
if (strongType == -1) { // none found
// default embedding level when no strong types found is 0.
paragraphEmbeddingLevel = 0;
} else if (strongType == L) {
paragraphEmbeddingLevel = 0;
} else { // AL, R
paragraphEmbeddingLevel = 1;
}
}
/**
* Process embedding format codes.
*
* Calls processEmbeddings to generate an embedding array from the explicit format codes. The
* embedding overrides in the array are then applied to the result types, and the result levels are
* initialized.
* @see #processEmbeddings
*/
private void determineExplicitEmbeddingLevels() {
embeddings = processEmbeddings(resultTypes, paragraphEmbeddingLevel);
for (int i = 0; i < textLength; ++i) {
byte level = embeddings[i];
if ((level & 0x80) != 0) {
level &= 0x7f;
resultTypes[i] = typeForLevel(level);
}
resultLevels[i] = level;
}
}
/**
* Rules X9.
* Remove explicit codes so that they may be ignored during the remainder
* of the main portion of the algorithm. The length of the resulting text
* is returned.
* @return the length of the data excluding explicit codes and BN.
*/
private int removeExplicitCodes() {
int w = 0;
for (int i = 0; i < textLength; ++i) {
byte t = initialTypes[i];
if (!(t == LRE || t == RLE || t == LRO || t == RLO || t == PDF || t == BN)) {
embeddings[w] = embeddings[i];
resultTypes[w] = resultTypes[i];
resultLevels[w] = resultLevels[i];
w++;
}
}
return w; // new textLength while explicit levels are removed
}
/**
* Reinsert levels information for explicit codes.
* This is for ease of relating the level information
* to the original input data. Note that the levels
* assigned to these codes are arbitrary, they're
* chosen so as to avoid breaking level runs.
* @param textLength the length of the data after compression
* @return the length of the data (original length of
* types array supplied to constructor)
*/
private int reinsertExplicitCodes(int textLength) {
for (int i = initialTypes.length; --i >= 0;) {
byte t = initialTypes[i];
if (t == LRE || t == RLE || t == LRO || t == RLO || t == PDF || t == BN) {
embeddings[i] = 0;
resultTypes[i] = t;
resultLevels[i] = -1;
} else {
--textLength;
embeddings[i] = embeddings[textLength];
resultTypes[i] = resultTypes[textLength];
resultLevels[i] = resultLevels[textLength];
}
}
// now propagate forward the levels information (could have
// propagated backward, the main thing is not to introduce a level
// break where one doesn't already exist).
if (resultLevels[0] == -1) {
resultLevels[0] = paragraphEmbeddingLevel;
}
for (int i = 1; i < initialTypes.length; ++i) {
if (resultLevels[i] == -1) {
resultLevels[i] = resultLevels[i-1];
}
}
// Embedding information is for informational purposes only
// so need not be adjusted.
return initialTypes.length;
}
/**
* 2) determining explicit levels
* Rules X1 - X8
*
* The interaction of these rules makes handling them a bit complex.
* This examines resultTypes but does not modify it. It returns embedding and
* override information in the result array. The low 7 bits are the level, the high
* bit is set if the level is an override, and clear if it is an embedding.
*/
private static byte[] processEmbeddings(byte[] resultTypes, byte paragraphEmbeddingLevel) {
final int EXPLICIT_LEVEL_LIMIT = 62;
int textLength = resultTypes.length;
byte[] embeddings = new byte[textLength];
// This stack will store the embedding levels and override status in a single byte
// as described above.
byte[] embeddingValueStack = new byte[EXPLICIT_LEVEL_LIMIT];
int stackCounter = 0;
// An LRE or LRO at level 60 is invalid, since the new level 62 is invalid. But
// an RLE at level 60 is valid, since the new level 61 is valid. The current wording
// of the rules requires that the RLE remain valid even if a previous LRE is invalid.
// This keeps track of ignored LRE or LRO codes at level 60, so that the matching PDFs
// will not try to pop the stack.
int overflowAlmostCounter = 0;
// This keeps track of ignored pushes at level 61 or higher, so that matching PDFs will
// not try to pop the stack.
int overflowCounter = 0;
// Rule X1.
// Keep the level separate from the value (level | override status flag) for ease of access.
byte currentEmbeddingLevel = paragraphEmbeddingLevel;
byte currentEmbeddingValue = paragraphEmbeddingLevel;
// Loop through types, handling all remaining rules
for (int i = 0; i < textLength; ++i) {
embeddings[i] = currentEmbeddingValue;
byte t = resultTypes[i];
// Rules X2, X3, X4, X5
switch (t) {
case RLE:
case LRE:
case RLO:
case LRO:
// Only need to compute new level if current level is valid
if (overflowCounter == 0) {
byte newLevel;
if (t == RLE || t == RLO) {
newLevel = (byte)((currentEmbeddingLevel + 1) | 1); // least greater odd
} else { // t == LRE || t == LRO
newLevel = (byte)((currentEmbeddingLevel + 2) & ~1); // least greater even
}
// If the new level is valid, push old embedding level and override status
// No check for valid stack counter, since the level check suffices.
if (newLevel < EXPLICIT_LEVEL_LIMIT) {
embeddingValueStack[stackCounter] = currentEmbeddingValue;
stackCounter++;
currentEmbeddingLevel = newLevel;
if (t == LRO || t == RLO) { // override
currentEmbeddingValue = (byte)(newLevel | 0x80);
} else {
currentEmbeddingValue = newLevel;
}
// Adjust level of format mark (for expositional purposes only, this gets
// removed later).
embeddings[i] = currentEmbeddingValue;
break;
}
// Otherwise new level is invalid, but a valid level can still be achieved if this
// level is 60 and we encounter an RLE or RLO further on. So record that we
// 'almost' overflowed.
if (currentEmbeddingLevel == 60) {
overflowAlmostCounter++;
break;
}
}
// Otherwise old or new level is invalid.
overflowCounter++;
break;
case PDF:
// The only case where this did not actually overflow but may have almost overflowed
// is when there was an RLE or RLO on level 60, which would result in level 61. So we
// only test the almost overflow condition in that case.
//
// Also note that there may be a PDF without any pushes at all.
if (overflowCounter > 0) {
--overflowCounter;
} else if (overflowAlmostCounter > 0 && currentEmbeddingLevel != 61) {
--overflowAlmostCounter;
} else if (stackCounter > 0) {
--stackCounter;
currentEmbeddingValue = embeddingValueStack[stackCounter];
currentEmbeddingLevel = (byte)(currentEmbeddingValue & 0x7f);
}
break;
case B:
// Rule X8.
// These values are reset for clarity, in this implementation B can only
// occur as the last code in the array.
stackCounter = 0;
overflowCounter = 0;
overflowAlmostCounter = 0;
currentEmbeddingLevel = paragraphEmbeddingLevel;
currentEmbeddingValue = paragraphEmbeddingLevel;
embeddings[i] = paragraphEmbeddingLevel;
break;
default:
break;
}
}
return embeddings;
}
/**
* 3) resolving weak types
* Rules W1-W7.
*
* Note that some weak types (EN, AN) remain after this processing is complete.
*/
private void resolveWeakTypes(int start, int limit, byte level, byte sor, byte eor) {
// Rule W1.
// Changes all NSMs.
byte preceedingCharacterType = sor;
for (int i = start; i < limit; ++i) {
byte t = resultTypes[i];
if (t == NSM) {
resultTypes[i] = preceedingCharacterType;
} else {
preceedingCharacterType = t;
}
}
// Rule W2.
// EN does not change at the start of the run, because sor != AL.
for (int i = start; i < limit; ++i) {
if (resultTypes[i] == EN) {
for (int j = i - 1; j >= start; --j) {
byte t = resultTypes[j];
if (t == L || t == R || t == AL) {
if (t == AL) {
resultTypes[i] = AN;
}
break;
}
}
}
}
// Rule W3.
for (int i = start; i < limit; ++i) {
if (resultTypes[i] == AL) {
resultTypes[i] = R;
}
}
// Rule W4.
// Since there must be values on both sides for this rule to have an
// effect, the scan skips the first and last value.
//
// Although the scan proceeds left to right, and changes the type values
// in a way that would appear to affect the computations later in the scan,
// there is actually no problem. A change in the current value can only
// affect the value to its immediate right, and only affect it if it is
// ES or CS. But the current value can only change if the value to its
// right is not ES or CS. Thus either the current value will not change,
// or its change will have no effect on the remainder of the analysis.
for (int i = start + 1; i < limit - 1; ++i) {
if (resultTypes[i] == ES || resultTypes[i] == CS) {
byte prevSepType = resultTypes[i-1];
byte succSepType = resultTypes[i+1];
if (prevSepType == EN && succSepType == EN) {
resultTypes[i] = EN;
} else if (resultTypes[i] == CS && prevSepType == AN && succSepType == AN) {
resultTypes[i] = AN;
}
}
}
// Rule W5.
for (int i = start; i < limit; ++i) {
if (resultTypes[i] == ET) {
// locate end of sequence
int runstart = i;
int runlimit = findRunLimit(runstart, limit, new byte[] { ET });
// check values at ends of sequence
byte t = runstart == start ? sor : resultTypes[runstart - 1];
if (t != EN) {
t = runlimit == limit ? eor : resultTypes[runlimit];
}
if (t == EN) {
setTypes(runstart, runlimit, EN);
}
// continue at end of sequence
i = runlimit;
}
}
// Rule W6.
for (int i = start; i < limit; ++i) {
byte t = resultTypes[i];
if (t == ES || t == ET || t == CS) {
resultTypes[i] = ON;
}
}
// Rule W7.
for (int i = start; i < limit; ++i) {
if (resultTypes[i] == EN) {
// set default if we reach start of run
byte prevStrongType = sor;
for (int j = i - 1; j >= start; --j) {
byte t = resultTypes[j];
if (t == L || t == R) { // AL's have been removed
prevStrongType = t;
break;
}
}
if (prevStrongType == L) {
resultTypes[i] = L;
}
}
}
}
/**
* 6) resolving neutral types
* Rules N1-N2.
*/
private void resolveNeutralTypes(int start, int limit, byte level, byte sor, byte eor) {
for (int i = start; i < limit; ++i) {
byte t = resultTypes[i];
if (t == WS || t == ON || t == B || t == S) {
// find bounds of run of neutrals
int runstart = i;
int runlimit = findRunLimit(runstart, limit, new byte[] {B, S, WS, ON});
// determine effective types at ends of run
byte leadingType;
byte trailingType;
if (runstart == start) {
leadingType = sor;
} else {
leadingType = resultTypes[runstart - 1];
if (leadingType == L || leadingType == R) {
// found the strong type
} else if (leadingType == AN) {
leadingType = R;
} else if (leadingType == EN) {
// Since EN's with previous strong L types have been changed
// to L in W7, the leadingType must be R.
leadingType = R;
}
}
if (runlimit == limit) {
trailingType = eor;
} else {
trailingType = resultTypes[runlimit];
if (trailingType == L || trailingType == R) {
// found the strong type
} else if (trailingType == AN) {
trailingType = R;
} else if (trailingType == EN) {
trailingType = R;
}
}
byte resolvedType;
if (leadingType == trailingType) {
// Rule N1.
resolvedType = leadingType;
} else {
// Rule N2.
// Notice the embedding level of the run is used, not
// the paragraph embedding level.
resolvedType = typeForLevel(level);
}
setTypes(runstart, runlimit, resolvedType);
// skip over run of (former) neutrals
i = runlimit;
}
}
}
/**
* 7) resolving implicit embedding levels
* Rules I1, I2.
*/
private void resolveImplicitLevels(int start, int limit, byte level, byte sor, byte eor) {
if ((level & 1) == 0) { // even level
for (int i = start; i < limit; ++i) {
byte t = resultTypes[i];
// Rule I1.
if (t == L ) {
// no change
} else if (t == R) {
resultLevels[i] += 1;
} else { // t == AN || t == EN
resultLevels[i] += 2;
}
}
} else { // odd level
for (int i = start; i < limit; ++i) {
byte t = resultTypes[i];
// Rule I2.
if (t == R) {
// no change
} else { // t == L || t == AN || t == EN
resultLevels[i] += 1;
}
}
}
}
//
// Output
//
public byte[] getLevels() {
return getLevels(new int[]{textLength});
}
/**
* Return levels array breaking lines at offsets in linebreaks.
* Rule L1.
*
* The returned levels array contains the resolved level for each
* bidi code passed to the constructor.
*
* The linebreaks array must include at least one value.
* The values must be in strictly increasing order (no duplicates)
* between 1 and the length of the text, inclusive. The last value
* must be the length of the text.
*
* @param linebreaks the offsets at which to break the paragraph
* @return the resolved levels of the text
*/
public byte[] getLevels(int[] linebreaks) {
// Note that since the previous processing has removed all
// P, S, and WS values from resultTypes, the values referred to
// in these rules are the initial types, before any processing
// has been applied (including processing of overrides).
//
// This example implementation has reinserted explicit format codes
// and BN, in order that the levels array correspond to the
// initial text. Their final placement is not normative.
// These codes are treated like WS in this implementation,
// so they don't interrupt sequences of WS.
validateLineBreaks(linebreaks, textLength);
byte[] result = (byte[])resultLevels.clone(); // will be returned to caller
// don't worry about linebreaks since if there is a break within
// a series of WS values preceding S, the linebreak itself
// causes the reset.
for (int i = 0; i < result.length; ++i) {
byte t = initialTypes[i];
if (t == B || t == S) {
// Rule L1, clauses one and two.
result[i] = paragraphEmbeddingLevel;
// Rule L1, clause three.
for (int j = i - 1; j >= 0; --j) {
if (isWhitespace(initialTypes[j])) { // including format codes
result[j] = paragraphEmbeddingLevel;
} else {
break;
}
}
}
}
// Rule L1, clause four.
int start = 0;
for (int i = 0; i < linebreaks.length; ++i) {
int limit = linebreaks[i];
for (int j = limit - 1; j >= start; --j) {
if (isWhitespace(initialTypes[j])) { // including format codes
result[j] = paragraphEmbeddingLevel;
} else {
break;
}
}
start = limit;
}
return result;
}
/**
* Return reordering array breaking lines at offsets in linebreaks.
*
* The reordering array maps from a visual index to a logical index.
* Lines are concatenated from left to right. So for example, the
* fifth character from the left on the third line is
*
getReordering(linebreaks)[linebreaks[1] + 4]
* (linebreaks[1] is the position after the last character of the
* second line, which is also the index of the first character on the
* third line, and adding four gets the fifth character from the left).
*
* The linebreaks array must include at least one value.
* The values must be in strictly increasing order (no duplicates)
* between 1 and the length of the text, inclusive. The last value
* must be the length of the text.
*
* @param linebreaks the offsets at which to break the paragraph.
*/
public int[] getReordering(int[] linebreaks) {
validateLineBreaks(linebreaks, textLength);
byte[] levels = getLevels(linebreaks);
return computeMultilineReordering(levels, linebreaks);
}
/**
* Return multiline reordering array for a given level array.
* Reordering does not occur across a line break.
*/
private static int[] computeMultilineReordering(byte[] levels, int[] linebreaks) {
int[] result = new int[levels.length];
int start = 0;
for (int i = 0; i < linebreaks.length; ++i) {
int limit = linebreaks[i];
byte[] templevels = new byte[limit - start];
System.arraycopy(levels, start, templevels, 0, templevels.length);
int[] temporder = computeReordering(templevels);
for (int j = 0; j < temporder.length; ++j) {
result[start + j] = temporder[j] + start;
}
start = limit;
}
return result;
}
/**
* Return reordering array for a given level array. This reorders a single line.
* The reordering is a visual to logical map. For example,
* the leftmost char is string.charAt(order[0]).
* Rule L2.
*/
private static int[] computeReordering(byte[] levels) {
int lineLength = levels.length;
int[] result = new int[lineLength];
// initialize order
for (int i = 0; i < lineLength; ++i) {
result[i] = i;
}
// locate highest level found on line.
// Note the rules say text, but no reordering across line bounds is performed,
// so this is sufficient.
byte highestLevel = 0;
byte lowestOddLevel = 63;
for (int i = 0; i < lineLength; ++i) {
byte level = levels[i];
if (level > highestLevel) {
highestLevel = level;
}
if (((level & 1) != 0) && level < lowestOddLevel) {
lowestOddLevel = level;
}
}
for (int level = highestLevel; level >= lowestOddLevel; --level) {
for (int i = 0; i < lineLength; ++i) {
if (levels[i] >= level) {
// find range of text at or above this level
int start = i;
int limit = i + 1;
while (limit < lineLength && levels[limit] >= level) {
++limit;
}
// reverse run
for (int j = start, k = limit - 1; j < k; ++j, --k) {
int temp = result[j];
result[j] = result[k];
result[k] = temp;
}
// skip to end of level run
i = limit;
}
}
}
return result;
}
/**
* Return the base level of the paragraph.
*/
public byte getBaseLevel() {
return paragraphEmbeddingLevel;
}
// --- internal utilities -------------------------------------------------
/**
* Return true if the type is considered a whitespace type for the line break rules.
*/
private static boolean isWhitespace(byte biditype) {
switch (biditype) {
case LRE:
case RLE:
case LRO:
case RLO:
case PDF:
case BN:
case WS:
return true;
default:
return false;
}
}
/**
* Return the strong type (L or R) corresponding to the level.
*/
private static byte typeForLevel(int level) {
return ((level & 0x1) == 0) ? L : R;
}
/**
* Return the limit of the run starting at index that includes only resultTypes in validSet.
* This checks the value at index, and will return index if that value is not in validSet.
*/
private int findRunLimit(int index, int limit, byte[] validSet) {
--index;
loop:
while (++index < limit) {
byte t = resultTypes[index];
for (int i = 0; i < validSet.length; ++i) {
if (t == validSet[i]) {
continue loop;
}
}
// didn't find a match in validSet
return index;
}
return limit;
}
/**
* Return the start of the run including index that includes only resultTypes in validSet.
* This assumes the value at index is valid, and does not check it.
*/
private int findRunStart(int index, byte[] validSet) {
loop:
while (--index >= 0) {
byte t = resultTypes[index];
for (int i = 0; i < validSet.length; ++i) {
if (t == validSet[i]) {
continue loop;
}
}
return index + 1;
}
return 0;
}
/**
* Set resultTypes from start up to (but not including) limit to newType.
*/
private void setTypes(int start, int limit, byte newType) {
for (int i = start; i < limit; ++i) {
resultTypes[i] = newType;
}
}
/**
* Set resultLevels from start up to (but not including) limit to newLevel.
*/
private void setLevels(int start, int limit, byte newLevel) {
for (int i = start; i < limit; ++i) {
resultLevels[i] = newLevel;
}
}
// --- input validation ---------------------------------------------------
/**
* Throw exception if type array is invalid.
*/
private static void validateTypes(byte[] types) {
if (types == null) {
throw new IllegalArgumentException(MessageLocalization.getComposedMessage("types.is.null"));
}
for (int i = 0; i < types.length; ++i) {
if (types[i] < TYPE_MIN || types[i] > TYPE_MAX) {
throw new IllegalArgumentException(MessageLocalization.getComposedMessage("illegal.type.value.at.1.2", String.valueOf(i), String.valueOf(types[i])));
}
}
for (int i = 0; i < types.length - 1; ++i) {
if (types[i] == B) {
throw new IllegalArgumentException(MessageLocalization.getComposedMessage("b.type.before.end.of.paragraph.at.index.1", i));
}
}
}
/**
* Throw exception if paragraph embedding level is invalid. Special allowance for -1 so that
* default processing can still be performed when using this API.
*/
private static void validateParagraphEmbeddingLevel(byte paragraphEmbeddingLevel) {
if (paragraphEmbeddingLevel != -1 &&
paragraphEmbeddingLevel != 0 &&
paragraphEmbeddingLevel != 1) {
throw new IllegalArgumentException(MessageLocalization.getComposedMessage("illegal.paragraph.embedding.level.1", paragraphEmbeddingLevel));
}
}
/**
* Throw exception if line breaks array is invalid.
*/
private static void validateLineBreaks(int[] linebreaks, int textLength) {
int prev = 0;
for (int i = 0; i < linebreaks.length; ++i) {
int next = linebreaks[i];
if (next <= prev) {
throw new IllegalArgumentException(MessageLocalization.getComposedMessage("bad.linebreak.1.at.index.2", String.valueOf(next), String.valueOf(i)));
}
prev = next;
}
if (prev != textLength) {
throw new IllegalArgumentException(MessageLocalization.getComposedMessage("last.linebreak.must.be.at.1", textLength));
}
}
private static final byte rtypes[] = new byte[0x10000];
private static char baseTypes[] = {
0, 8, (char)BN, 9, 9, (char)S, 10, 10, (char)B, 11, 11, (char)S, 12, 12, (char)WS, 13, 13, (char)B,
14, 27, (char)BN, 28, 30, (char)B, 31, 31, (char)S, 32, 32, (char)WS, 33, 34, (char)ON, 35, 37, (char)ET,
38, 42, (char)ON, 43, 43, (char)ET, 44, 44, (char)CS, 45, 45, (char)ET, 46, 46, (char)CS, 47, 47, (char)ES,
48, 57, (char)EN, 58, 58, (char)CS, 59, 64, (char)ON, 65, 90, (char)L, 91, 96, (char)ON, 97, 122, (char)L,
123, 126, (char)ON, 127, 132, (char)BN, 133, 133, (char)B, 134, 159, (char)BN, 160, 160, (char)CS,
161, 161, (char)ON, 162, 165, (char)ET, 166, 169, (char)ON, 170, 170, (char)L, 171, 175, (char)ON,
176, 177, (char)ET, 178, 179, (char)EN, 180, 180, (char)ON, 181, 181, (char)L, 182, 184, (char)ON,
185, 185, (char)EN, 186, 186, (char)L, 187, 191, (char)ON, 192, 214, (char)L, 215, 215, (char)ON,
216, 246, (char)L, 247, 247, (char)ON, 248, 696, (char)L, 697, 698, (char)ON, 699, 705, (char)L,
706, 719, (char)ON, 720, 721, (char)L, 722, 735, (char)ON, 736, 740, (char)L, 741, 749, (char)ON,
750, 750, (char)L, 751, 767, (char)ON, 768, 855, (char)NSM, 856, 860, (char)L, 861, 879, (char)NSM,
880, 883, (char)L, 884, 885, (char)ON, 886, 893, (char)L, 894, 894, (char)ON, 895, 899, (char)L,
900, 901, (char)ON, 902, 902, (char)L, 903, 903, (char)ON, 904, 1013, (char)L, 1014, 1014, (char)ON,
1015, 1154, (char)L, 1155, 1158, (char)NSM, 1159, 1159, (char)L, 1160, 1161, (char)NSM,
1162, 1417, (char)L, 1418, 1418, (char)ON, 1419, 1424, (char)L, 1425, 1441, (char)NSM,
1442, 1442, (char)L, 1443, 1465, (char)NSM, 1466, 1466, (char)L, 1467, 1469, (char)NSM,
1470, 1470, (char)R, 1471, 1471, (char)NSM, 1472, 1472, (char)R, 1473, 1474, (char)NSM,
1475, 1475, (char)R, 1476, 1476, (char)NSM, 1477, 1487, (char)L, 1488, 1514, (char)R,
1515, 1519, (char)L, 1520, 1524, (char)R, 1525, 1535, (char)L, 1536, 1539, (char)AL,
1540, 1547, (char)L, 1548, 1548, (char)CS, 1549, 1549, (char)AL, 1550, 1551, (char)ON,
1552, 1557, (char)NSM, 1558, 1562, (char)L, 1563, 1563, (char)AL, 1564, 1566, (char)L,
1567, 1567, (char)AL, 1568, 1568, (char)L, 1569, 1594, (char)AL, 1595, 1599, (char)L,
1600, 1610, (char)AL, 1611, 1624, (char)NSM, 1625, 1631, (char)L, 1632, 1641, (char)AN,
1642, 1642, (char)ET, 1643, 1644, (char)AN, 1645, 1647, (char)AL, 1648, 1648, (char)NSM,
1649, 1749, (char)AL, 1750, 1756, (char)NSM, 1757, 1757, (char)AL, 1758, 1764, (char)NSM,
1765, 1766, (char)AL, 1767, 1768, (char)NSM, 1769, 1769, (char)ON, 1770, 1773, (char)NSM,
1774, 1775, (char)AL, 1776, 1785, (char)EN, 1786, 1805, (char)AL, 1806, 1806, (char)L,
1807, 1807, (char)BN, 1808, 1808, (char)AL, 1809, 1809, (char)NSM, 1810, 1839, (char)AL,
1840, 1866, (char)NSM, 1867, 1868, (char)L, 1869, 1871, (char)AL, 1872, 1919, (char)L,
1920, 1957, (char)AL, 1958, 1968, (char)NSM, 1969, 1969, (char)AL, 1970, 2304, (char)L,
2305, 2306, (char)NSM, 2307, 2363, (char)L, 2364, 2364, (char)NSM, 2365, 2368, (char)L,
2369, 2376, (char)NSM, 2377, 2380, (char)L, 2381, 2381, (char)NSM, 2382, 2384, (char)L,
2385, 2388, (char)NSM, 2389, 2401, (char)L, 2402, 2403, (char)NSM, 2404, 2432, (char)L,
2433, 2433, (char)NSM, 2434, 2491, (char)L, 2492, 2492, (char)NSM, 2493, 2496, (char)L,
2497, 2500, (char)NSM, 2501, 2508, (char)L, 2509, 2509, (char)NSM, 2510, 2529, (char)L,
2530, 2531, (char)NSM, 2532, 2545, (char)L, 2546, 2547, (char)ET, 2548, 2560, (char)L,
2561, 2562, (char)NSM, 2563, 2619, (char)L, 2620, 2620, (char)NSM, 2621, 2624, (char)L,
2625, 2626, (char)NSM, 2627, 2630, (char)L, 2631, 2632, (char)NSM, 2633, 2634, (char)L,
2635, 2637, (char)NSM, 2638, 2671, (char)L, 2672, 2673, (char)NSM, 2674, 2688, (char)L,
2689, 2690, (char)NSM, 2691, 2747, (char)L, 2748, 2748, (char)NSM, 2749, 2752, (char)L,
2753, 2757, (char)NSM, 2758, 2758, (char)L, 2759, 2760, (char)NSM, 2761, 2764, (char)L,
2765, 2765, (char)NSM, 2766, 2785, (char)L, 2786, 2787, (char)NSM, 2788, 2800, (char)L,
2801, 2801, (char)ET, 2802, 2816, (char)L, 2817, 2817, (char)NSM, 2818, 2875, (char)L,
2876, 2876, (char)NSM, 2877, 2878, (char)L, 2879, 2879, (char)NSM, 2880, 2880, (char)L,
2881, 2883, (char)NSM, 2884, 2892, (char)L, 2893, 2893, (char)NSM, 2894, 2901, (char)L,
2902, 2902, (char)NSM, 2903, 2945, (char)L, 2946, 2946, (char)NSM, 2947, 3007, (char)L,
3008, 3008, (char)NSM, 3009, 3020, (char)L, 3021, 3021, (char)NSM, 3022, 3058, (char)L,
3059, 3064, (char)ON, 3065, 3065, (char)ET, 3066, 3066, (char)ON, 3067, 3133, (char)L,
3134, 3136, (char)NSM, 3137, 3141, (char)L, 3142, 3144, (char)NSM, 3145, 3145, (char)L,
3146, 3149, (char)NSM, 3150, 3156, (char)L, 3157, 3158, (char)NSM, 3159, 3259, (char)L,
3260, 3260, (char)NSM, 3261, 3275, (char)L, 3276, 3277, (char)NSM, 3278, 3392, (char)L,
3393, 3395, (char)NSM, 3396, 3404, (char)L, 3405, 3405, (char)NSM, 3406, 3529, (char)L,
3530, 3530, (char)NSM, 3531, 3537, (char)L, 3538, 3540, (char)NSM, 3541, 3541, (char)L,
3542, 3542, (char)NSM, 3543, 3632, (char)L, 3633, 3633, (char)NSM, 3634, 3635, (char)L,
3636, 3642, (char)NSM, 3643, 3646, (char)L, 3647, 3647, (char)ET, 3648, 3654, (char)L,
3655, 3662, (char)NSM, 3663, 3760, (char)L, 3761, 3761, (char)NSM, 3762, 3763, (char)L,
3764, 3769, (char)NSM, 3770, 3770, (char)L, 3771, 3772, (char)NSM, 3773, 3783, (char)L,
3784, 3789, (char)NSM, 3790, 3863, (char)L, 3864, 3865, (char)NSM, 3866, 3892, (char)L,
3893, 3893, (char)NSM, 3894, 3894, (char)L, 3895, 3895, (char)NSM, 3896, 3896, (char)L,
3897, 3897, (char)NSM, 3898, 3901, (char)ON, 3902, 3952, (char)L, 3953, 3966, (char)NSM,
3967, 3967, (char)L, 3968, 3972, (char)NSM, 3973, 3973, (char)L, 3974, 3975, (char)NSM,
3976, 3983, (char)L, 3984, 3991, (char)NSM, 3992, 3992, (char)L, 3993, 4028, (char)NSM,
4029, 4037, (char)L, 4038, 4038, (char)NSM, 4039, 4140, (char)L, 4141, 4144, (char)NSM,
4145, 4145, (char)L, 4146, 4146, (char)NSM, 4147, 4149, (char)L, 4150, 4151, (char)NSM,
4152, 4152, (char)L, 4153, 4153, (char)NSM, 4154, 4183, (char)L, 4184, 4185, (char)NSM,
4186, 5759, (char)L, 5760, 5760, (char)WS, 5761, 5786, (char)L, 5787, 5788, (char)ON,
5789, 5905, (char)L, 5906, 5908, (char)NSM, 5909, 5937, (char)L, 5938, 5940, (char)NSM,
5941, 5969, (char)L, 5970, 5971, (char)NSM, 5972, 6001, (char)L, 6002, 6003, (char)NSM,
6004, 6070, (char)L, 6071, 6077, (char)NSM, 6078, 6085, (char)L, 6086, 6086, (char)NSM,
6087, 6088, (char)L, 6089, 6099, (char)NSM, 6100, 6106, (char)L, 6107, 6107, (char)ET,
6108, 6108, (char)L, 6109, 6109, (char)NSM, 6110, 6127, (char)L, 6128, 6137, (char)ON,
6138, 6143, (char)L, 6144, 6154, (char)ON, 6155, 6157, (char)NSM, 6158, 6158, (char)WS,
6159, 6312, (char)L, 6313, 6313, (char)NSM, 6314, 6431, (char)L, 6432, 6434, (char)NSM,
6435, 6438, (char)L, 6439, 6443, (char)NSM, 6444, 6449, (char)L, 6450, 6450, (char)NSM,
6451, 6456, (char)L, 6457, 6459, (char)NSM, 6460, 6463, (char)L, 6464, 6464, (char)ON,
6465, 6467, (char)L, 6468, 6469, (char)ON, 6470, 6623, (char)L, 6624, 6655, (char)ON,
6656, 8124, (char)L, 8125, 8125, (char)ON, 8126, 8126, (char)L, 8127, 8129, (char)ON,
8130, 8140, (char)L, 8141, 8143, (char)ON, 8144, 8156, (char)L, 8157, 8159, (char)ON,
8160, 8172, (char)L, 8173, 8175, (char)ON, 8176, 8188, (char)L, 8189, 8190, (char)ON,
8191, 8191, (char)L, 8192, 8202, (char)WS, 8203, 8205, (char)BN, 8206, 8206, (char)L,
8207, 8207, (char)R, 8208, 8231, (char)ON, 8232, 8232, (char)WS, 8233, 8233, (char)B,
8234, 8234, (char)LRE, 8235, 8235, (char)RLE, 8236, 8236, (char)PDF, 8237, 8237, (char)LRO,
8238, 8238, (char)RLO, 8239, 8239, (char)WS, 8240, 8244, (char)ET, 8245, 8276, (char)ON,
8277, 8278, (char)L, 8279, 8279, (char)ON, 8280, 8286, (char)L, 8287, 8287, (char)WS,
8288, 8291, (char)BN, 8292, 8297, (char)L, 8298, 8303, (char)BN, 8304, 8304, (char)EN,
8305, 8307, (char)L, 8308, 8313, (char)EN, 8314, 8315, (char)ET, 8316, 8318, (char)ON,
8319, 8319, (char)L, 8320, 8329, (char)EN, 8330, 8331, (char)ET, 8332, 8334, (char)ON,
8335, 8351, (char)L, 8352, 8369, (char)ET, 8370, 8399, (char)L, 8400, 8426, (char)NSM,
8427, 8447, (char)L, 8448, 8449, (char)ON, 8450, 8450, (char)L, 8451, 8454, (char)ON,
8455, 8455, (char)L, 8456, 8457, (char)ON, 8458, 8467, (char)L, 8468, 8468, (char)ON,
8469, 8469, (char)L, 8470, 8472, (char)ON, 8473, 8477, (char)L, 8478, 8483, (char)ON,
8484, 8484, (char)L, 8485, 8485, (char)ON, 8486, 8486, (char)L, 8487, 8487, (char)ON,
8488, 8488, (char)L, 8489, 8489, (char)ON, 8490, 8493, (char)L, 8494, 8494, (char)ET,
8495, 8497, (char)L, 8498, 8498, (char)ON, 8499, 8505, (char)L, 8506, 8507, (char)ON,
8508, 8511, (char)L, 8512, 8516, (char)ON, 8517, 8521, (char)L, 8522, 8523, (char)ON,
8524, 8530, (char)L, 8531, 8543, (char)ON, 8544, 8591, (char)L, 8592, 8721, (char)ON,
8722, 8723, (char)ET, 8724, 9013, (char)ON, 9014, 9082, (char)L, 9083, 9108, (char)ON,
9109, 9109, (char)L, 9110, 9168, (char)ON, 9169, 9215, (char)L, 9216, 9254, (char)ON,
9255, 9279, (char)L, 9280, 9290, (char)ON, 9291, 9311, (char)L, 9312, 9371, (char)EN,
9372, 9449, (char)L, 9450, 9450, (char)EN, 9451, 9751, (char)ON, 9752, 9752, (char)L,
9753, 9853, (char)ON, 9854, 9855, (char)L, 9856, 9873, (char)ON, 9874, 9887, (char)L,
9888, 9889, (char)ON, 9890, 9984, (char)L, 9985, 9988, (char)ON, 9989, 9989, (char)L,
9990, 9993, (char)ON, 9994, 9995, (char)L, 9996, 10023, (char)ON, 10024, 10024, (char)L,
10025, 10059, (char)ON, 10060, 10060, (char)L, 10061, 10061, (char)ON, 10062, 10062, (char)L,
10063, 10066, (char)ON, 10067, 10069, (char)L, 10070, 10070, (char)ON, 10071, 10071, (char)L,
10072, 10078, (char)ON, 10079, 10080, (char)L, 10081, 10132, (char)ON, 10133, 10135, (char)L,
10136, 10159, (char)ON, 10160, 10160, (char)L, 10161, 10174, (char)ON, 10175, 10191, (char)L,
10192, 10219, (char)ON, 10220, 10223, (char)L, 10224, 11021, (char)ON, 11022, 11903, (char)L,
11904, 11929, (char)ON, 11930, 11930, (char)L, 11931, 12019, (char)ON, 12020, 12031, (char)L,
12032, 12245, (char)ON, 12246, 12271, (char)L, 12272, 12283, (char)ON, 12284, 12287, (char)L,
12288, 12288, (char)WS, 12289, 12292, (char)ON, 12293, 12295, (char)L, 12296, 12320, (char)ON,
12321, 12329, (char)L, 12330, 12335, (char)NSM, 12336, 12336, (char)ON, 12337, 12341, (char)L,
12342, 12343, (char)ON, 12344, 12348, (char)L, 12349, 12351, (char)ON, 12352, 12440, (char)L,
12441, 12442, (char)NSM, 12443, 12444, (char)ON, 12445, 12447, (char)L, 12448, 12448, (char)ON,
12449, 12538, (char)L, 12539, 12539, (char)ON, 12540, 12828, (char)L, 12829, 12830, (char)ON,
12831, 12879, (char)L, 12880, 12895, (char)ON, 12896, 12923, (char)L, 12924, 12925, (char)ON,
12926, 12976, (char)L, 12977, 12991, (char)ON, 12992, 13003, (char)L, 13004, 13007, (char)ON,
13008, 13174, (char)L, 13175, 13178, (char)ON, 13179, 13277, (char)L, 13278, 13279, (char)ON,
13280, 13310, (char)L, 13311, 13311, (char)ON, 13312, 19903, (char)L, 19904, 19967, (char)ON,
19968, 42127, (char)L, 42128, 42182, (char)ON, 42183, 64284, (char)L, 64285, 64285, (char)R,
64286, 64286, (char)NSM, 64287, 64296, (char)R, 64297, 64297, (char)ET, 64298, 64310, (char)R,
64311, 64311, (char)L, 64312, 64316, (char)R, 64317, 64317, (char)L, 64318, 64318, (char)R,
64319, 64319, (char)L, 64320, 64321, (char)R, 64322, 64322, (char)L, 64323, 64324, (char)R,
64325, 64325, (char)L, 64326, 64335, (char)R, 64336, 64433, (char)AL, 64434, 64466, (char)L,
64467, 64829, (char)AL, 64830, 64831, (char)ON, 64832, 64847, (char)L, 64848, 64911, (char)AL,
64912, 64913, (char)L, 64914, 64967, (char)AL, 64968, 65007, (char)L, 65008, 65020, (char)AL,
65021, 65021, (char)ON, 65022, 65023, (char)L, 65024, 65039, (char)NSM, 65040, 65055, (char)L,
65056, 65059, (char)NSM, 65060, 65071, (char)L, 65072, 65103, (char)ON, 65104, 65104, (char)CS,
65105, 65105, (char)ON, 65106, 65106, (char)CS, 65107, 65107, (char)L, 65108, 65108, (char)ON,
65109, 65109, (char)CS, 65110, 65118, (char)ON, 65119, 65119, (char)ET, 65120, 65121, (char)ON,
65122, 65123, (char)ET, 65124, 65126, (char)ON, 65127, 65127, (char)L, 65128, 65128, (char)ON,
65129, 65130, (char)ET, 65131, 65131, (char)ON, 65132, 65135, (char)L, 65136, 65140, (char)AL,
65141, 65141, (char)L, 65142, 65276, (char)AL, 65277, 65278, (char)L, 65279, 65279, (char)BN,
65280, 65280, (char)L, 65281, 65282, (char)ON, 65283, 65285, (char)ET, 65286, 65290, (char)ON,
65291, 65291, (char)ET, 65292, 65292, (char)CS, 65293, 65293, (char)ET, 65294, 65294, (char)CS,
65295, 65295, (char)ES, 65296, 65305, (char)EN, 65306, 65306, (char)CS, 65307, 65312, (char)ON,
65313, 65338, (char)L, 65339, 65344, (char)ON, 65345, 65370, (char)L, 65371, 65381, (char)ON,
65382, 65503, (char)L, 65504, 65505, (char)ET, 65506, 65508, (char)ON, 65509, 65510, (char)ET,
65511, 65511, (char)L, 65512, 65518, (char)ON, 65519, 65528, (char)L, 65529, 65531, (char)BN,
65532, 65533, (char)ON, 65534, 65535, (char)L};
static {
for (int k = 0; k < baseTypes.length; ++k) {
int start = baseTypes[k];
int end = baseTypes[++k];
byte b = (byte)baseTypes[++k];
while (start <= end)
rtypes[start++] = b;
}
}
}