com.sun.enterprise.admin.remote.RemoteRestAdminCommand Maven / Gradle / Ivy
Show all versions of payara-embedded-all Show documentation
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 2012-2014 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
package com.sun.enterprise.admin.remote;
import com.sun.enterprise.admin.event.AdminCommandEventBrokerImpl;
import com.sun.enterprise.admin.remote.reader.CliActionReport;
import com.sun.enterprise.admin.remote.reader.ProprietaryReader;
import com.sun.enterprise.admin.remote.reader.ProprietaryReaderFactory;
import com.sun.enterprise.admin.remote.reader.StringProprietaryReader;
import com.sun.enterprise.admin.remote.sse.GfSseEventReceiver;
import com.sun.enterprise.admin.remote.sse.GfSseEventReceiverProprietaryReader;
import com.sun.enterprise.admin.remote.sse.GfSseInboundEvent;
import com.sun.enterprise.admin.remote.writer.ProprietaryWriter;
import com.sun.enterprise.admin.remote.writer.ProprietaryWriterFactory;
import com.sun.enterprise.admin.util.AdminLoggerInfo;
import com.sun.enterprise.config.serverbeans.SecureAdmin;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.net.ssl.SSLException;
import org.glassfish.api.admin.*;
import org.glassfish.api.admin.CommandModel.ParamModel;
import com.sun.enterprise.universal.i18n.LocalStringsImpl;
import com.sun.enterprise.universal.io.SmartFile;
import com.sun.enterprise.admin.util.CommandModelData.ParamModelData;
import com.sun.enterprise.admin.util.AuthenticationInfo;
import com.sun.enterprise.admin.util.CachedCommandModel;
import com.sun.enterprise.admin.util.HttpConnectorAddress;
import com.sun.enterprise.admin.util.cache.AdminCacheUtils;
import com.sun.enterprise.util.StringUtils;
import com.sun.enterprise.util.net.NetUtils;
import org.glassfish.admin.payload.PayloadFilesManager;
import org.glassfish.api.admin.Payload;
import org.codehaus.jettison.json.JSONArray;
import org.codehaus.jettison.json.JSONException;
import org.codehaus.jettison.json.JSONObject;
import org.glassfish.api.ActionReport;
import org.glassfish.api.ActionReport.ExitCode;
import org.glassfish.common.util.admin.AuthTokenManager;
import org.w3c.dom.*;
/**
* Utility class for executing remote admin commands.
* Each instance of RemoteAdminCommand represents a particular
* remote command on a particular remote server accessed using
* particular credentials. The instance can be reused to execute
* the same command multiple times with different arguments.
*
* Arguments to the command are supplied using a ParameterMap
* passed to the executeCommand method.
* ParameterMap is a MultiMap where each key can have multiple
* values, although this class only supports a single value for
* each option. Operands for the command are stored as the option
* named "DEFAULT" and can have multiple values.
*
* Before a command can be executed, the metadata for the command
* (in the form of a CommandModel) is required. The getCommandModel
* method will fetch the metadata from the server, save it, and
* return it. If the CommandModel for a command is known
* independently (e.g., stored in a local cache, or known a priori),
* it can be set using the setCommandModel method. If the
* metadata isn't known when the exectureCommand method is
* called, it will fetch the metadata from the server before executing
* the command.
*
* Any files returned by the command will be stored in the current
* directory. The setFileOutputDirectory method can be used to control
* where returned files are saved.
*
*
* This implementation is now in retention period. All content was migrated
* to RemoteRestAdminCommand. This implementation will be removed just after
* all necessary changes and tests will be done.
*/
//Fork of RemoteAdminCommand
public class RemoteRestAdminCommand extends AdminCommandEventBrokerImpl {
private static final LocalStringsImpl strings =
new LocalStringsImpl(RemoteRestAdminCommand.class);
private static final String QUERY_STRING_SEPARATOR = "&";
private static final String ADMIN_URI_PATH = "/command/";
private static final String COMMAND_NAME_REGEXP =
"^[a-zA-Z_][-a-zA-Z0-9_]*$";
private static final String READ_TIMEOUT = "AS_ADMIN_READTIMEOUT";
public static final String COMMAND_MODEL_MATCH_HEADER = "X-If-Command-Model-Match";
private static final String MEDIATYPE_TXT = "text/plain";
private static final String MEDIATYPE_JSON = "application/json";
private static final String MEDIATYPE_MULTIPART = "multipart/*";
private static final String MEDIATYPE_SSE = "text/event-stream";
private static final String EOL = StringUtils.EOL;
private static final int defaultReadTimeout; // read timeout for URL conns
private String responseFormatType = "hk2-agent";
// return output string rather than printing it
protected String output;
private Map attrs;
private boolean doUpload = false;
private boolean addedUploadOption = false;
private RestPayloadImpl.Outbound outboundPayload;
private String usage;
private File fileOutputDir;
private StringBuilder passwordOptions;
private String manpage;
private String cmduri;
private ActionReport actionReport;
// constructor parameters
protected String name;
protected String host;
private String canonicalHostCache; //Used by getCanonicalHost() to cache resolved value
protected int port;
protected boolean secure;
protected boolean notify;
protected String user;
protected String password;
protected Logger logger;
protected String scope;
protected String authToken = null;
protected boolean prohibitDirectoryUploads = false;
// executeCommand parameters
protected ParameterMap options;
protected List operands;
private CommandModel commandModel;
private boolean commandModelFromCache = false;
private int readTimeout = defaultReadTimeout;
private int connectTimeout = -1;
private boolean interactive = true;
private List requestHeaders = new ArrayList();
private boolean closeSse = false;
private boolean enableCommandModelCache = true;
//TODO: Remove it
private OutputStream userOut;
/*
* Set a default read timeout for URL connections.
*/
static {
String rt = System.getProperty(READ_TIMEOUT);
if (rt == null) {
rt = System.getenv(READ_TIMEOUT);
}
if (rt != null) {
defaultReadTimeout = Integer.parseInt(rt);
} else {
defaultReadTimeout = 10 * 60 * 1000; // 10 minutes
}
}
/**
* content-type used for each file-transfer part of a payload to or from
* the server
*/
private static final String FILE_PAYLOAD_MIME_TYPE =
"application/octet-stream";
/**
* Interface to enable factoring out common HTTP connection management code.
*
* The implementation of this interface must implement
*
* - {@link #prepareConnection} - to perform all pre-connection configuration - set headers, chunking, etc.
* as well as writing any payload to the outbound connection. In short
* anything needed prior to the URLConnection#connect invocation.
*
* The caller will invoke this method after it has invoked {@link URL#openConnection}
* but before it invokes {@link URL#connect}.
*
- {@link #useConnection} - to read from the
* input stream, etc. The caller will invoke this method after it has
* successfully invoked {@link URL#connect}.
*
* Because the caller might have to work with multiple URLConnection objects
* (as it follows redirection, for example) this contract allows the caller
* to delegate to the HttpCommand implementation multiple times to configure
* each of the URLConnections objects, then to invoke useConnection only
* once after it has the "final" URLConnection object. For this reason
* be sure to implement prepareConnection so that it can be invoked
* multiple times.
*
*/
interface HttpCommand {
/**
* Configures the HttpURLConnection (headers, chuncking, etc.) according
* to the needs of this use of the connection and then writes any
* required outbound payload to the connection.
*
* This method might be invoked multiple times before the connection is
* actually connected, so it should be serially reentrant. Note that the
* caller will
* @param urlConnection the connection to be configured
*/
public void prepareConnection(HttpURLConnection urlConnection) throws IOException;
/**
* Uses the configured and connected connection to read
* data, process it, etc.
*
* @param urlConnection the connection to be used
* @throws CommandException
* @throws IOException
*/
public void useConnection(HttpURLConnection urlConnection)
throws CommandException, IOException;
}
public RemoteRestAdminCommand(String name, String host, int port)
throws CommandException {
this(name, host, port, false, "admin", null, Logger.getAnonymousLogger(),false);
}
public RemoteRestAdminCommand(String name, String host, int port,
boolean secure, String user, String password, Logger logger,boolean notify)
throws CommandException {
this(name, host, port, secure, user, password, logger, null, null, false,notify);
}
/**
* Construct a new remote command object. The command and arguments
* are supplied later using the execute method in the superclass.
*/
public RemoteRestAdminCommand(String name, String host, int port,
boolean secure, String user, String password, Logger logger,
final String scope,
final String authToken,
final boolean prohibitDirectoryUploads, boolean notify)
throws CommandException {
this.name = name;
this.host = host;
this.port = port;
this.secure = secure;
this.notify = notify;
this.user = user;
this.password = password;
this.logger = logger;
this.scope = scope;
this.authToken = authToken;
this.prohibitDirectoryUploads = prohibitDirectoryUploads;
checkName();
}
/**
* Make sure the command name is legitimate and
* won't allow any URL spoofing attacks.
*/
private void checkName() throws CommandException {
if (!name.matches(COMMAND_NAME_REGEXP)) {
throw new CommandException("Illegal command name: " + name);
//todo: XXX - I18N
}
}
public void closeSse(String message, ActionReport.ExitCode exitCode) {
ActionReport report = new CliActionReport();
report.setMessage(message);
report.setActionExitCode(exitCode);
setActionReport(report);
this.closeSse = true;
}
/**
* Set the response type used in requests to the server.
* The response type is sent in the User-Agent HTTP header
* and tells the server what format of response to produce.
*/
public void setResponseFormatType(String responseFormatType) {
this.responseFormatType = responseFormatType;
}
/**
* If set, the raw response from the command is written to the
* specified stream.
*/
public void setUserOut(OutputStream userOut) {
this.userOut = userOut;
}
/**
* Set the CommandModel used by this command. Normally the
* CommandModel will be fetched from the server using the
* getCommandModel method, which will also save the CommandModel
* for further use. If the CommandModel is known in advance, it
* can be set with this method and avoid the call to the server.
*/
public void setCommandModel(CommandModel commandModel) {
this.commandModel = commandModel;
this.commandModelFromCache = false;
}
/**
* Set the read timeout for the URLConnection.
*/
public void setReadTimeout(int readTimeout) {
this.readTimeout = readTimeout;
}
public static int getReadTimeout() {
return defaultReadTimeout;
}
public String findPropertyInReport(String key) {
if (actionReport == null) {
return null;
}
return actionReport.findProperty(key);
}
/**
* Set the connect timeout for the URLConnection.
*/
public void setConnectTimeout(int connectTimeout) {
this.connectTimeout = connectTimeout;
}
/**
* Set the interactive mode for the command. By default, the command is
* interactive.
*/
public void setInteractive(boolean state) {
this.interactive = state;
}
public void setEnableCommandModelCache(boolean enableCommandModelCache) {
this.enableCommandModelCache = enableCommandModelCache;
}
/**
* Get the CommandModel for the command from the server.
* If the CommandModel hasn't been set, it's fetched from
* the server.
*
* @return the model for the command
* @throws CommandException if the server can't be contacted
*/
public CommandModel getCommandModel() throws CommandException {
if (commandModel == null && enableCommandModelCache) {
long startNanos = System.nanoTime();
try {
commandModel = getCommandModelFromCache();
if (commandModel != null) {
this.commandModelFromCache = true;
if (logger.isLoggable(Level.FINEST)) {
logger.log(Level.FINEST, "Command model for command {0} was successfully loaded from the cache. [Duration: {1} nanos]", new Object[] {name, System.nanoTime() - startNanos});
}
} else {
if (logger.isLoggable(Level.FINEST)) {
logger.log(Level.FINEST, "Command model for command {0} is not in cache. It must be fatched from server.", name);
}
}
} catch (Exception ex) {
if (logger.isLoggable(Level.FINEST)) {
logger.log(Level.FINEST, "Can not get data from cache under key " + createCommandCacheKey(), ex);
}
}
}
if (commandModel == null) {
fetchCommandModel();
}
return commandModel;
}
private CommandModel getCommandModelFromCache() {
String cachedModel = AdminCacheUtils.getCache().get(createCommandCacheKey(), String.class);
if (cachedModel == null) {
return null;
}
cachedModel = cachedModel.trim();
int ind = cachedModel.indexOf('\n');
if (ind < 0) {
return null;
}
String eTag = cachedModel.substring(0, ind);
if (!eTag.startsWith("ETag:")) {
return null;
}
eTag = eTag.substring(5).trim();
if (logger.isLoggable(Level.FINEST)) {
logger.log(Level.FINEST, "Cached command model ETag is {0}", eTag);
}
String content = cachedModel.substring(ind + 1).trim();
CachedCommandModel result = parseMetadata(content, eTag);
return result;
}
/**
* Parse the JSon metadata for the command.
*
* @param str the string
* @return the etag to compare the command cache model
*/
private CachedCommandModel parseMetadata(String str, String etag) {
if (logger.isLoggable(Level.FINER)) { // XXX - assume "debug" == "FINER"
logger.finer("------- RAW METADATA RESPONSE ---------");
logger.log(Level.FINER, "ETag: {0}", etag);
logger.finer(str);
logger.finer("------- RAW METADATA RESPONSE ---------");
}
if (str == null) {
return null;
}
try {
boolean sawFile = false;
JSONObject obj = new JSONObject(str);
obj = obj.getJSONObject("command");
CachedCommandModel cm = new CachedCommandModel(obj.getString("@name"), etag);
cm.dashOk = obj.optBoolean("@unknown-options-are-operands", false);
cm.managedJob = obj.optBoolean("@managed-job", false);
cm.setUsage(obj.optString("usage", null));
Object optns = obj.opt("option");
if (!JSONObject.NULL.equals(optns)) {
JSONArray jsonOptions;
if (optns instanceof JSONArray) {
jsonOptions = (JSONArray) optns;
} else {
jsonOptions = new JSONArray();
jsonOptions.put(optns);
}
for (int i = 0; i < jsonOptions.length(); i++) {
JSONObject jsOpt = jsonOptions.getJSONObject(i);
String type = jsOpt.getString("@type");
ParamModelData opt = new ParamModelData(
jsOpt.getString("@name"),
typeOf(type),
jsOpt.optBoolean("@optional", false),
jsOpt.optString("@default"),
jsOpt.optString("@short"),
jsOpt.optBoolean("@obsolete", false),
jsOpt.optString("@alias"));
opt.param._acceptableValues = jsOpt.optString("@acceptable-values");
if ("PASSWORD".equals(type)) {
opt.param._password = true;
opt.prompt = jsOpt.optString("@prompt");
opt.promptAgain = jsOpt.optString("@prompt-again");
} else if ("FILE".equals(type)) {
sawFile = true;
}
if (jsOpt.optBoolean("@primary", false)) {
opt.param._primary = true;
}
if (jsOpt.optBoolean("@multiple", false)) {
if (opt.type == File.class) {
opt.type = File[].class;
} else {
opt.type = List.class;
}
opt.param._multiple = true;
}
cm.add(opt);
}
}
if (sawFile) {
cm.add(new ParamModelData("upload", Boolean.class,
true, null));
addedUploadOption = true;
cm.setAddedUploadOption(true);
}
if (notify) {
cm.add(new ParamModelData("notify",Boolean.class,false, "false"));
}
this.usage = cm.getUsage();
return cm;
} catch (JSONException ex) {
logger.log(Level.FINER, "Can not parse command metadata", ex);
return null;
}
}
/** If command model was load from local cache.
*/
public boolean isCommandModelFromCache() {
return commandModelFromCache;
}
/**
* Set the directory in which any returned files will be stored.
* The default is the user's home directory.
*/
public void setFileOutputDirectory(File dir) {
fileOutputDir = dir;
}
/**
* Return a modifiable list of headers to be added to the request.
*/
public List headers() {
return requestHeaders;
}
protected boolean useSse() throws CommandException {
return getCommandModel().isManagedJob();
}
/**
* Run the command using the specified arguments.
* Return the output of the command.
*/
public String executeCommand(ParameterMap opts) throws CommandException {
if (logger.isLoggable(Level.FINER)) {
logger.log(Level.FINER, "RemoteRestAdminCommand.executeCommand() - name: {0}", this.name);
}
//Just to be sure. Cover get help
if (opts != null && opts.size() == 1 && opts.containsKey("help")) {
return getManPage();
}
ParameterMap params = processParams(opts);
boolean retry;
do { //Cache update cycle
retry = false;
try {
executeRemoteCommand(params);
} catch (CommandValidationException mve) {
if (refetchInvalidModel() && isCommandModelFromCache()) {
fetchCommandModel();
retry = true;
} else {
throw mve;
}
}
return output;
} while (retry);
}
private ParameterMap processParams(ParameterMap opts) throws CommandException {
if (opts == null) {
opts = new ParameterMap();
}
// first, make sure we have the command model
getCommandModel();
// XXX : This is to take care of camel case from ReST calls that
// do not go through usual CLI path
// XXX : This is not clean; this should be handled the same way
// it is handled for incoming CLI commands
options = new ParameterMap();
for (Map.Entry> o : opts.entrySet()) {
String key = o.getKey();
List value = o.getValue();
options.set(key.toLowerCase(Locale.ENGLISH), value);
}
operands = options.get("default"); // "DEFAULT".toLowerCase()
try {
initializeDoUpload();
// if uploading, we need a payload
if (doUpload) {
outboundPayload = new RestPayloadImpl.Outbound(true);
} else {
outboundPayload = null;
}
ParameterMap result = new ParameterMap();
ParamModel operandParam = null;
for (ParamModel opt : commandModel.getParameters()) {
if (opt.getParam().primary()) {
operandParam = opt;
continue;
}
String paramName = opt.getName();
List paramValues = new ArrayList(options.get(paramName.toLowerCase(Locale.ENGLISH)));
if (!opt.getParam().alias().isEmpty() &&
!paramName.equalsIgnoreCase(opt.getParam().alias())) {
paramValues.addAll(options.get(opt.getParam().alias().toLowerCase(Locale.ENGLISH)));
}
if (!opt.getParam().multiple() && paramValues.size() > 1) {
throw new CommandException(strings.get("tooManyOptions",
paramName));
}
if (paramValues.isEmpty()) {
// perhaps it's set in the environment?
String envValue = getFromEnvironment(paramName);
if (envValue != null) {
paramValues.add(envValue);
}
}
if (paramValues.isEmpty()) {
/*
* Option still not set. Note that we ignore the default
* value and don't send it explicitly on the assumption
* that the server will supply the default value itself.
*
* If the missing option is required, that's an error,
* which should never happen here because validate()
* should check it first.
*/
if (!opt.getParam().optional()) {
throw new CommandException(strings.get("missingOption",
paramName));
}
// optional param not set, skip it
continue;
}
for (String paramValue : paramValues) {
if (opt.getType() == File.class ||
opt.getType() == File[].class) {
addFileOption(result, paramName, paramValue);
} else {
result.add(paramName, paramValue);
}
}
}
// add operands
for (String operand : operands) {
if (operandParam.getType() == File.class ||
operandParam.getType() == File[].class) {
addFileOption(result, "DEFAULT", operand);
} else {
result.add("DEFAULT", operand);
}
}
return result;
} catch (IOException ioex) {
// possibly an error caused while reading or writing a file?
throw new CommandException("I/O Error", ioex);
}
}
/** If admin model is invalid, will be automatically refetched?
*/
protected boolean refetchInvalidModel() {
return true;
}
/**
* After a successful command execution, the attributes returned
* by the command are saved. This method returns those saved
* attributes.
*/
public Map getAttributes() {
return attrs;
}
/**
* Return true if we're successful in collecting new information
* (and thus the caller should try the request again).
* Subclasses can override to (e.g.) collect updated authentication
* information by prompting the user.
* The implementation in this class returns false, indicating that the
* authentication information was not updated.
*/
protected boolean updateAuthentication() {
return false;
}
/**
* Subclasses can override to supply parameter values from environment.
* The implementation in this class returns null, indicating that the
* name is not available in the environment.
*/
protected String getFromEnvironment(String name) {
return null;
}
/**
* Called when a non-secure connection attempt fails and it appears
* that the server requires a secure connection.
* Subclasses can override to indicate that the connection should
* The implementation in this class returns false, indicating that the
* connection should not be retried.
*/
protected boolean retryUsingSecureConnection(String host, int port) {
return false;
}
/**
* Return the error message to be used in the AuthenticationException.
* Subclasses can override to provide a more detailed message, for
* example, indicating the source of the password that failed.
* The implementation in this class returns a default error message.
*/
protected String reportAuthenticationException() {
return strings.get("InvalidCredentials", user);
}
/**
* Get the URI for executing the command.
*/
protected String getCommandURI() {
if (cmduri == null) {
StringBuilder rv = new StringBuilder(ADMIN_URI_PATH);
if (scope != null) {
rv.append(scope);
}
rv.append(name);
cmduri = rv.toString();
}
return cmduri;
}
/**
* Actually execute the remote command.
*/
private void executeRemoteCommand(final ParameterMap params) throws CommandException {
doHttpCommand(getCommandURI(), "POST", new HttpCommand() {
@Override
public void prepareConnection(final HttpURLConnection urlConnection) throws IOException {
try {
if (useSse()) {
urlConnection.addRequestProperty("Accept", MEDIATYPE_SSE);
} else {
urlConnection.addRequestProperty("Accept", MEDIATYPE_JSON + "; q=0.8, "
+ MEDIATYPE_MULTIPART + "; q=0.9");
}
} catch (CommandException cex) {
throw new IOException(cex.getLocalizedMessage(), cex);
}
// add any user-specified headers
for (Header h : requestHeaders) {
urlConnection.addRequestProperty(h.getName(), h.getValue());
}
//Write data
ParamsWithPayload pwp;
if (doUpload) {
urlConnection.setChunkedStreamingMode(0);
pwp = new ParamsWithPayload(outboundPayload, params);
} else {
pwp = new ParamsWithPayload(null, params);
}
ProprietaryWriter writer = ProprietaryWriterFactory.getWriter(pwp);
if (logger.isLoggable(Level.FINER)) {
logger.log(Level.FINER, "Writer to use {0}", writer.getClass().getName());
}
writer.writeTo(pwp, urlConnection);
}
@Override
public void useConnection(final HttpURLConnection urlConnection) throws CommandException, IOException {
String resultMediaType = urlConnection.getContentType();
if (logger.isLoggable(Level.FINER)) {
logger.log(Level.FINER, "Result type is {0}", resultMediaType);
logger.log(Level.FINER, "URL connection is {0}", urlConnection.getClass().getName());
}
if (resultMediaType != null && resultMediaType.startsWith(MEDIATYPE_SSE)) {
String instanceId = null;
boolean retryableCommand = false;
try {
logger.log(Level.FINEST, "Response is SSE - about to read events");
closeSse = false;
ProprietaryReader reader = new GfSseEventReceiverProprietaryReader();
GfSseEventReceiver eventReceiver = reader.readFrom(urlConnection.getInputStream(), resultMediaType);
GfSseInboundEvent event;
do {
event = eventReceiver.readEvent();
if (event != null) {
if (logger.isLoggable(Level.FINEST)) {
logger.log(Level.FINEST, "Event: {0}", event.getName());
}
fireEvent(event.getName(), event);
if (AdminCommandState.EVENT_STATE_CHANGED.equals(event.getName())) {
AdminCommandState acs = event.getData(AdminCommandState.class, MEDIATYPE_JSON);
if (acs.getId() != null) {
instanceId = acs.getId();
if (logger.isLoggable(Level.FINEST)) {
logger.log(Level.FINEST, "Command instance ID: {0}", instanceId);
}
}
if (acs.getState() == AdminCommandState.State.COMPLETED ||
acs.getState() == AdminCommandState.State.RECORDED ||
acs.getState() == AdminCommandState.State.REVERTED) {
if (acs.getActionReport() != null) {
setActionReport(acs.getActionReport());
}
closeSse = true;
if (!acs.isOutboundPayloadEmpty()) {
logger.log(Level.FINEST, "Romote command holds data. Must load it");
downloadPayloadFromManaged(instanceId);
}
} else if (acs.getState() == AdminCommandState.State.FAILED_RETRYABLE) {
logger.log(Level.INFO, strings.get("remotecommand.failedretryable", acs.getId()));
if (acs.getActionReport() != null) {
setActionReport(acs.getActionReport());
}
closeSse = true;
} else if (acs.getState() == AdminCommandState.State.RUNNING_RETRYABLE) {
logger.log(Level.FINEST, "Command stores checkpoint and is retryable");
retryableCommand = true;
}
}
}
} while (event != null && !eventReceiver.isClosed() && !closeSse);
if (closeSse) {
try { eventReceiver.close(); } catch (Exception exc) {}
}
} catch (IOException ioex) {
if (instanceId != null && "Premature EOF".equals(ioex.getMessage())) {
if (retryableCommand) {
throw new CommandException(strings.get("remotecommand.lostConnection.retryableCommand", new Object[] {instanceId}), ioex);
} else {
throw new CommandException(strings.get("remotecommand.lostConnection", new Object[] {instanceId}), ioex);
}
} else {
throw new CommandException(ioex.getMessage(), ioex);
}
} catch (Exception ex) {
throw new CommandException(ex.getMessage(), ex);
}
} else {
ProprietaryReader reader
= ProprietaryReaderFactory.getReader(ParamsWithPayload.class, resultMediaType);
if (urlConnection.getResponseCode() == HttpURLConnection.HTTP_INTERNAL_ERROR) {
ActionReport report;
if (reader == null) {
report = new CliActionReport();
report.setActionExitCode(ExitCode.FAILURE);
report.setMessage(urlConnection.getResponseMessage());
} else {
report = reader.readFrom(urlConnection.getErrorStream(), resultMediaType).getActionReport();
}
setActionReport(report);
} else {
ParamsWithPayload pwp = reader.readFrom(urlConnection.getInputStream(), resultMediaType);
if (pwp.getPayloadInbound() == null) {
setActionReport(pwp.getActionReport());
} else if (resultMediaType.startsWith("multipart/")) {
RestPayloadImpl.Inbound inbound = pwp.getPayloadInbound();
setActionReport(pwp.getActionReport());
if (logger.isLoggable(Level.FINER)) {
logger.log(Level.FINER, "------ PAYLOAD ------");
Iterator parts = inbound.parts();
while (parts.hasNext()) {
Payload.Part part = parts.next();
logger.log(Level.FINER, " - {0} [{1}]", new Object[]{part.getName(), part.getContentType()});
}
logger.log(Level.FINER, "---- END PAYLOAD ----");
}
PayloadFilesManager downloadedFilesMgr =
new PayloadFilesManager.Perm(fileOutputDir, null, logger, null);
try {
downloadedFilesMgr.processParts(inbound);
} catch (CommandException cex) {
throw cex;
} catch (Exception ex) {
throw new CommandException(ex.getMessage(), ex);
}
}
}
}
}
});
if (actionReport == null) {
this.output = null;
throw new CommandException(strings.get("emptyResponse"));
}
if (actionReport.getActionExitCode() == ExitCode.FAILURE) {
throw new CommandException(strings.getString("remote.failure.prefix", "remote failure:") + " " + this.output);
}
}
private void downloadPayloadFromManaged(String jobId) {
if (jobId == null) {
return;
}
try {
RemoteRestAdminCommand command = new RemoteRestAdminCommand("_get-payload",
this.host, this.port, this.secure, this.user, this.password,
this.logger, this.scope, this.authToken, this.prohibitDirectoryUploads,notify);
ParameterMap params = new ParameterMap();
params.add("DEFAULT", jobId);
command.executeCommand(params);
} catch (CommandException ex) {
logger.log(Level.WARNING, strings.getString("remote.sse.canNotGetPayload", "Cannot retrieve payload. {0}"), ex.getMessage());
}
}
protected void setActionReport(ActionReport ar) {
this.actionReport = ar;
if (ar == null) {
this.output = null;
} else {
StringBuilder sb = new StringBuilder();
if (ar instanceof CliActionReport) {
addCombinedMessages((CliActionReport) ar, sb);
} else if (ar.getMessage() != null) {
sb.append(ar.getMessage());
}
addSubMessages("", ar.getTopMessagePart(), sb);
this.output = sb.toString();
if (logger.isLoggable(Level.FINER)) {
logger.log(Level.FINER, "------ ACTION REPORT ------");
logger.log(Level.FINER, String.valueOf(actionReport));
logger.log(Level.FINER, "---- END ACTION REPORT ----");
}
}
}
public ActionReport getActionReport() {
return actionReport;
}
private static void addSubMessages(String indentPrefix, ActionReport.MessagePart mp, StringBuilder sb) {
if (mp == null || sb == null) {
return;
}
if (indentPrefix == null) {
indentPrefix = "";
}
List children = mp.getChildren();
if (children != null) {
for (ActionReport.MessagePart subPart : children) {
if (sb.length() > 0) {
sb.append(EOL);
}
if (ok(subPart.getMessage())) {
sb.append(subPart.getMessage());
}
addSubMessages(indentPrefix + " ", subPart, sb);
}
}
}
private static void addCombinedMessages(CliActionReport aReport, StringBuilder sb) {
if (aReport == null || sb == null) {
return;
}
String mainMsg = ""; //this is the message related to the topMessage
String failMsg; //this is the message related to failure cause
// Other code in the server may write something like report.setMessage(exception.getMessage())
// and also set report.setFailureCause(exception). We need to avoid the duplicate message.
if (aReport.getMessage() != null && aReport.getMessage().length() != 0) {
if (sb.length() > 0) {
sb.append(EOL);
}
sb.append(aReport.getMessage());
}
if (aReport.getFailureCause() != null && aReport.getFailureCause().getMessage() != null && aReport.getFailureCause().getMessage().length() != 0) {
failMsg = aReport.getFailureCause().getMessage();
if (!failMsg.equals(mainMsg)) {
if (sb.length() > 0) sb.append(EOL);
}
sb.append(failMsg);
}
for (CliActionReport sub : aReport.getSubActionsReport()) {
addCombinedMessages(sub, sb);
}
}
private void doHttpCommand(String uriString, String httpMethod,
HttpCommand cmd) throws CommandException {
doHttpCommand(uriString, httpMethod, cmd, false /* isForMetadata */);
}
/**
* Set up an HTTP connection, call cmd.prepareConnection so the consumer of
* the connection can further configure it, then open the connection (following
* redirects if needed), then call cmd.useConnection so the consumer of the
* connection can use it.
*
* This method will try to execute the command repeatedly, for example,
* retrying with updated credentials (typically from the interactive user), etc., until the
* command succeeds or there are no more ways to retry that might succeed.
*
* @param uriString the URI to connect to
* @param httpMethod the HTTP method to use for the connection
* @param cmd the HttpCommand object
* @throws CommandException if anything goes wrong
*/
private void doHttpCommand(String uriString, String httpMethod,
HttpCommand cmd, boolean isForMetadata) throws CommandException {
HttpURLConnection urlConnection;
/*
* There are various reasons we might retry the command - an authentication
* challenges from the DAS, shifting from an insecure connection to
* a secure one, etc. So just keep trying as long as it makes sense.
*
* Any exception handling code inside the loop that changes something
* about the connection or the request and wants to retry must set
* shoudTryCommandAgain to true.
*/
boolean shouldTryCommandAgain;
/*
* If the DAS challenges us for credentials and we've already sent
* the caller-provided ones, we might ask the user for a new set
* and use them. But we want to ask only once.
*/
boolean askedUserForCredentials = false;
/*
* On a subsequent retry we might need to use secure, even if the
* caller did not request it.
*/
boolean shouldUseSecure = secure;
/*
* Note: HttpConnectorAddress will set up SSL/TLS client cert
* handling if the current configuration calls for it.
*/
HttpConnectorAddress url = getHttpConnectorAddress(
host, port, shouldUseSecure);
url.setInteractive(interactive);
do {
/*
* Any code that wants to trigger a retry will say so explicitly.
*/
shouldTryCommandAgain = false;
try {
final AuthenticationInfo authInfo = authenticationInfo();
if (logger.isLoggable(Level.FINER)) {
logger.log(Level.FINER, "URI: {0}", uriString);
logger.log(Level.FINER, "URL: {0}", url.toURL(uriString).toString());
logger.log(Level.FINER, "Method: {0}", httpMethod);
logger.log(Level.FINER, "Password options: {0}", passwordOptions);
logger.log(Level.FINER, "Using auth info: {0}", authInfo);
}
if (authInfo != null) {
url.setAuthenticationInfo(authInfo);
}
urlConnection = (HttpURLConnection) url.openConnection(uriString);
urlConnection.setRequestProperty("User-Agent", responseFormatType);
if (passwordOptions != null) {
urlConnection.setRequestProperty("X-passwords", passwordOptions.toString());
}
urlConnection.addRequestProperty("Cache-Control", "no-cache");
urlConnection.addRequestProperty("Pragma", "no-cache");
if (authToken != null) {
/*
* If this request is for metadata then we expect to reuse
* the auth token.
*/
urlConnection.setRequestProperty(
SecureAdmin.Util.ADMIN_ONE_TIME_AUTH_TOKEN_HEADER_NAME,
(isForMetadata ? AuthTokenManager.markTokenForReuse(authToken) : authToken));
}
if (commandModel != null && isCommandModelFromCache() && commandModel instanceof CachedCommandModel) {
urlConnection.setRequestProperty(COMMAND_MODEL_MATCH_HEADER, ((CachedCommandModel) commandModel).getETag());
if (logger.isLoggable(Level.FINER)) {
logger.log(Level.FINER, "CommandModel ETag: {0}", ((CachedCommandModel) commandModel).getETag());
}
}
urlConnection.setRequestMethod(httpMethod);
urlConnection.setReadTimeout(readTimeout);
if (connectTimeout >= 0) {
urlConnection.setConnectTimeout(connectTimeout);
}
addAdditionalHeaders(urlConnection);
urlConnection.addRequestProperty("X-Requested-By", "cli");
cmd.prepareConnection(urlConnection);
urlConnection.connect();
/*
* We must handle redirection from http to https explicitly
* because, even if the HttpURLConnection's followRedirect is
* set to true, the Java SE implementation does not do so if the
* procotols are different.
*/
String redirection = checkConnect(urlConnection);
if (redirection != null) {
/*
* Log at FINER; at FINE it would appear routinely when used from
* asadmin.
*/
logger.log(Level.FINER, "Following redirection to " + redirection);
url = followRedirection(url, redirection);
shouldTryCommandAgain = true;
/*
* Record that, during the retry of this request, we should
* use https.
*/
shouldUseSecure = url.isSecure();
/*
* Record that, if this is a metadata request, the real
* request should use https also.
*/
secure = true;
urlConnection.disconnect();
continue;
}
/*
* No redirection, so we have established the connection.
* Now delegate again to the command processing to use the
* now-created connection.
*/
cmd.useConnection(urlConnection);
processHeaders(urlConnection);
logger.finer("doHttpCommand succeeds");
} catch (AuthenticationException authEx) {
logger.log(Level.FINER, "DAS has challenged for credentials");
/*
* Try to update the credentials if we haven't already done so.
*/
if (askedUserForCredentials) {
/*
* We already updated the credentials once, and the updated
* ones did not work. No recourse.
*/
logger.log(Level.FINER, "Already tried with updated credentials; cannot authenticate");
throw authEx;
}
/*
* Try to update the creds.
*/
logger.log(Level.FINER, "Try to update credentials");
if ( ! updateAuthentication()) {
/*
* No updated credentials are avaiable, so we
* have no more options.
*/
logger.log(Level.FINER, "Could not update credentials; cannot authenticate");
throw authEx;
}
/*
* We have another set of credentials we can try.
*/
logger.log(Level.FINER, "Was able to update the credentials so will retry with the updated ones");
askedUserForCredentials = true;
shouldTryCommandAgain = true;
continue;
} catch (ConnectException ce) {
logger.log(Level.FINER, "doHttpCommand: connect exception {0}", ce);
// this really means nobody was listening on the remote server
// note: ConnectException extends IOException and tells us more!
String msg = strings.get("ConnectException", host, port + "");
throw new CommandException(msg, ce);
} catch (UnknownHostException he) {
logger.log(Level.FINER, "doHttpCommand: host exception {0}", he);
// bad host name
String msg = strings.get("UnknownHostException", host);
throw new CommandException(msg, he);
} catch (SocketException se) {
logger.log(Level.FINER, "doHttpCommand: socket exception {0}", se);
try {
boolean serverAppearsSecure = NetUtils.isSecurePort(host, port);
if (serverAppearsSecure && !shouldUseSecure) {
if (retryUsingSecureConnection(host, port)) {
// retry using secure connection
shouldUseSecure = true;
shouldTryCommandAgain = true;
continue;
}
}
throw new CommandException(se);
} catch(IOException io) {
// XXX - logger.printExceptionStackTrace(io);
throw new CommandException(io);
}
} catch (SSLException se) {
logger.log(Level.FINER, "doHttpCommand: SSL exception {0}", se);
try {
boolean serverAppearsSecure = NetUtils.isSecurePort(host, port);
if (!serverAppearsSecure && secure) {
logger.log(Level.SEVERE, AdminLoggerInfo.mServerIsNotSecure,
new Object[] { host, port });
}
throw new CommandException(se);
} catch(IOException io) {
// XXX - logger.printExceptionStackTrace(io);
throw new CommandException(io);
}
} catch (SocketTimeoutException e) {
logger.log(Level.FINER, "doHttpCommand: read timeout {0}", e);
throw new CommandException(
strings.get("ReadTimeout", (float)readTimeout / 1000), e);
} catch (IOException e) {
logger.log(Level.FINER, "doHttpCommand: IO exception {0}", e);
throw new CommandException(
strings.get("IOError", e.getMessage()), e);
} catch (CommandException e) {
throw e;
} catch (Exception e) {
// logger.log(Level.FINER, "doHttpCommand: exception", e);
logger.log(Level.FINER, "doHttpCommand: exception {0}", e);
ByteArrayOutputStream buf = new ByteArrayOutputStream();
e.printStackTrace(new PrintStream(buf));
logger.finer(buf.toString());
throw new CommandException(e);
}
} while (shouldTryCommandAgain);
outboundPayload = null; // no longer needed
}
/**
* Creates a new HttpConnectorAddress corresponding to the location to which
* an earlier request was redirected.
*
* If the new protocol is https then the HttpConnectorAddress secure setting
* is turned on.
* @param originalAddr the address which has been redirected elsewhere
* @param redirection the location to which the attempted connection was redirected
* @return connector address for the new location
* @throws MalformedURLException
*/
private HttpConnectorAddress followRedirection(
final HttpConnectorAddress originalAddr,
final String redirection) throws MalformedURLException {
final URL url = new URL(redirection);
final boolean useSecure = (url.getProtocol().equalsIgnoreCase("https"));
HttpConnectorAddress hca = new HttpConnectorAddress(
url.getHost(),
url.getPort(),
useSecure,
originalAddr.getPath(),
originalAddr.getSSLSocketFactory());
hca.setInteractive(interactive);
return hca;
}
/**
* Provides an HttpConnectorAddress for use in connecting to the desired
* admin listener.
*
* This implementation works for true admin clients and will not work
* correctly for commands submitted to instances from inside the DAS. (That
* is done from the implementation in ServerRemoteAdminCommand which extends
* this class.)
*
* This code constructs the HttpConnectorAddress in a way that uses either
* no SSLSocketFactory (if security is off) or uses an SSLSocketFactory
* linked to the asadmin truststore.
*
* @param host the host name to which the connection should be made
* @param port the admin port on that host
* @param shouldUseSecure whether SSL should be used to connect or not
* @return
*/
protected HttpConnectorAddress getHttpConnectorAddress(
final String host, final int port, final boolean shouldUseSecure) {
HttpConnectorAddress hca = new HttpConnectorAddress(
host, port, shouldUseSecure);
hca.setInteractive(interactive);
return hca;
}
/**
* Adds any headers needed for the current environment to the admin
* request.
*
* @param urlConnection
*/
protected void addAdditionalHeaders(final URLConnection urlConnection) {
/*
* No additional headers are needed for connections originating from
* true admin clients.
*/
}
/**
* Process any headers needed from the reply to the admin
* request. Subclasses can override this method to handle processing
* headers in the command's reply.
*
* @param urlConnection
*/
protected void processHeaders(final URLConnection urlConnection) {
/*
* No headers are processed by RemoteAdminCommand.
*/
}
/*
* Returns the username/password authenticaiton information to use
* in building the outbound HTTP connection.
*
* @return the username/password auth. information to send with the request
*/
protected AuthenticationInfo authenticationInfo() {
return ((user != null || password != null) ? new AuthenticationInfo(user, password) : null);
}
/**
* Check that the connection was successful and handle any error responses,
* turning them into exceptions.
*/
private String checkConnect(HttpURLConnection urlConnection)
throws IOException, CommandException {
int code = urlConnection.getResponseCode();
if (logger.isLoggable(Level.FINER)) {
logger.log(Level.FINER, "Response code: " + code);
}
if (code == -1) {
URL url = urlConnection.getURL();
throw new CommandException(
strings.get("NotHttpResponse", url.getHost(), url.getPort()));
}
if (code == HttpURLConnection.HTTP_UNAUTHORIZED) {
throw new AuthenticationException(reportAuthenticationException());
}
if (code == HttpURLConnection.HTTP_PRECON_FAILED) {
throw new CommandValidationException("Code: " + HttpURLConnection.HTTP_PRECON_FAILED + ": Cached CommandModel is invalid.");
}
if (code == HttpURLConnection.HTTP_NOT_FOUND) {
try {
throw new InvalidCommandException(ProprietaryReaderFactory
.getReader(String.class, urlConnection.getContentType())
.readFrom(urlConnection.getErrorStream(), urlConnection.getContentType()));
} catch (IOException ioex) {
throw new InvalidCommandException(urlConnection.getResponseMessage());
}
}
/*
* The DAS might be redirecting to a secure port. If so, follow
* the redirection.
*/
if (isStatusRedirection(code)) {
return urlConnection.getHeaderField("Location");
}
if (code != HttpURLConnection.HTTP_OK && code != HttpURLConnection.HTTP_INTERNAL_ERROR) {
throw new CommandException(strings.get("BadResponse", String.valueOf(code),
urlConnection.getResponseMessage()));
}
/*
* If the connection worked then return null, indicating no
* redirection is needed.
*/
return null;
}
private boolean isStatusRedirection(final int returnCode) {
/*
* Currently, Grizzly redirects using 302. For admin requests the
* other varieties of redirection do not apply.
*/
return (returnCode == HttpURLConnection.HTTP_MOVED_TEMP);
}
/**
* Get the usage text.
* If we got usage information from the server, use it.
*
* @return usage text
*/
public String getUsage() {
return usage;
}
/**
* Adds an option for a file argument, passing the name (for uploads) or the
* path (for no-upload) operations.
*
* @param params the URI string so far
* @param optionName the option which takes a path or name
* @param filename the name of the file
* @return the URI string
* @throws java.io.IOException
*/
private void addFileOption(
ParameterMap params,
String optionName,
String filename) throws IOException, CommandException {
File f = SmartFile.sanitize(new File(filename));
logger.finer("FILE PARAM: " + optionName + " = " + f);
final boolean uploadThisFile = doUpload && ! f.isDirectory();
// attach the file to the payload - include the option name in the
// relative URI to avoid possible conflicts with same-named files
// in different directories
if (uploadThisFile) {
logger.finer("Uploading file");
try {
outboundPayload.attachFile(FILE_PAYLOAD_MIME_TYPE,
URI.create(optionName + "/" + f.getName() + (f.isDirectory() ? "/" : "")),
optionName,
null,
f,
true /* isRecursive - in case it's a directory */);
} catch (FileNotFoundException fnfe) {
/*
* Probably due to an attempt to upload a non-existent file.
* Convert this to a CommandException so it's better handled
* by the rest of the command running infrastructure.
*/
throw new CommandException(strings.get("UploadedFileNotFound", f.getAbsolutePath()));
}
}
if (f != null) {
// if we are about to upload it -- give just the name
// o/w give the full path
String pathToPass = (uploadThisFile ? f.getName() : f.getPath());
params.add(optionName, pathToPass);
}
}
/**
* Fetch the command metadata from the remote server.
*/
protected void fetchCommandModel() throws CommandException {
final long startNanos = System.nanoTime();
commandModel = null; //For sure not be used during request header construction
doHttpCommand(getCommandURI(), "GET", new HttpCommand() {
@Override
public void prepareConnection(HttpURLConnection urlConnection) {
urlConnection.setRequestProperty("Accept", MEDIATYPE_JSON);
}
@Override
public void useConnection(HttpURLConnection urlConnection) throws CommandException, IOException {
String eTag = urlConnection.getHeaderField("ETag");
if (eTag != null) {
eTag = eTag.trim();
if (eTag.startsWith("W/")) {
eTag = eTag.substring(2).trim();
}
if (eTag.startsWith("\"")) {
eTag = eTag.substring(1);
}
if (eTag.endsWith("\"")) {
eTag = eTag.substring(0, eTag.length() - 1);
}
}
String json = ProprietaryReaderFactory
.getReader(String.class, urlConnection.getContentType())
.readFrom(urlConnection.getInputStream(), urlConnection.getContentType());
commandModel = parseMetadata(json, eTag);
if (commandModel != null) {
commandModelFromCache = false;
if (logger.isLoggable(Level.FINEST)) {
logger.log(Level.FINEST, "Command model for {0} command fetched from remote server. [Duration: {1} nanos]", new Object[] {name, System.nanoTime() - startNanos});
}
try {
StringBuilder forCache = new StringBuilder(json.length() + 40);
forCache.append("ETag: ").append(eTag);
forCache.append("\n");
forCache.append(json);
AdminCacheUtils.getCache().put(createCommandCacheKey(), forCache.toString());
} catch (Exception ex) {
if (logger.isLoggable(Level.WARNING)) {
logger.log(Level.WARNING, AdminLoggerInfo.mCantPutToCache,
new Object[] { createCommandCacheKey() });
}
}
} else {
throw new InvalidCommandException(strings.get("unknownError"));
}
}
});
}
public String getManPage() throws CommandException {
if (manpage == null) {
doHttpCommand(getCommandURI() + "/manpage", "GET", new HttpCommand() {
@Override
public void prepareConnection(HttpURLConnection urlConnection) {
urlConnection.setRequestProperty("Accept", MEDIATYPE_TXT);
}
@Override
public void useConnection(HttpURLConnection urlConnection) throws CommandException, IOException {
manpage = ProprietaryReaderFactory
.getReader(String.class, urlConnection.getContentType())
.readFrom(urlConnection.getInputStream(), urlConnection.getContentType());
}
});
}
return manpage;
}
private String createCommandCacheKey() {
StringBuilder result = new StringBuilder(getCanonicalHost().length() + name.length() + 12);
result.append("cache/");
result.append(getCanonicalHost()).append('_').append(port);
result.append('/').append(name);
return result.toString();
}
protected String getCanonicalHost() {
if (canonicalHostCache == null) {
try {
InetAddress address = InetAddress.getByName(host);
canonicalHostCache = address.getCanonicalHostName();
} catch (UnknownHostException ex) {
canonicalHostCache = host;
if (canonicalHostCache != null) {
canonicalHostCache = canonicalHostCache.trim().toLowerCase(Locale.ENGLISH);
}
}
}
return canonicalHostCache;
}
private Class typeOf(String type) {
if (type.equals("STRING"))
return String.class;
else if (type.equals("BOOLEAN"))
return Boolean.class;
else if (type.equals("FILE"))
return File.class;
else if (type.equals("PASSWORD"))
return String.class;
else if (type.equals("PROPERTIES"))
return Properties.class;
else
return String.class;
}
/**
* Search all the parameters that were actually specified to see
* if any of them are FILE type parameters. If so, check for the
* "--upload" option.
*/
private void initializeDoUpload() throws CommandException {
boolean sawFile = false;
boolean sawDirectory = false;
/*
* We don't upload directories, even when asked to upload.
*/
boolean sawUploadableFile = false;
for (Map.Entry> param : options.entrySet()) {
String paramName = param.getKey();
if (paramName.equals("DEFAULT")) // operands handled below
continue;
ParamModel opt = commandModel.getModelFor(paramName);
if (opt != null &&
(opt.getType() == File.class ||
opt.getType() == File[].class)) {
sawFile = true;
for (String fname : options.get(opt.getName())) {
final File optionFile = new File(fname);
sawDirectory |= optionFile.isDirectory();
sawUploadableFile |= optionFile.isFile();
}
}
}
// now check the operands for files
ParamModel operandParam = getOperandModel();
if (operandParam != null &&
(operandParam.getType() == File.class ||
operandParam.getType() == File[].class)) {
sawFile |= !operands.isEmpty();
for (String operandValue : operands) {
final File operandFile = new File(operandValue);
sawDirectory |= operandFile.isDirectory();
sawUploadableFile |= operandFile.isFile();
}
}
if (sawFile) {
logger.finer("Saw a file parameter");
// found a FILE param, is doUpload set?
String upString = getOption("upload");
if (ok(upString)) {
doUpload = Boolean.parseBoolean(upString);
} else {
doUpload = !isLocal(host) && sawUploadableFile;
}
if (prohibitDirectoryUploads && sawDirectory && doUpload) {
// oops, can't upload directories
logger.finer("--upload=" + upString +
", doUpload=" + doUpload);
throw new CommandException(strings.get("CantUploadDirectory"));
}
}
if (addedUploadOption) {
logger.finer("removing --upload option");
//options.remove("upload"); // remove it
// XXX - no remove method, have to copy it
ParameterMap noptions = new ParameterMap();
for (Map.Entry> e : options.entrySet()) {
if (!e.getKey().equals("upload"))
noptions.set(e.getKey(), e.getValue());
}
options = noptions;
}
logger.finer("doUpload set to " + doUpload);
}
/**
* Does the given hostname represent the local host?
*/
private static boolean isLocal(String hostname) {
if (hostname.equalsIgnoreCase("localhost")) // the common case
return true;
try {
// let NetUtils do the hard work
InetAddress ia = InetAddress.getByName(hostname);
return NetUtils.isLocal(ia.getHostAddress());
} catch (UnknownHostException ex) {
/*
* Sometimes people misconfigure their name service and they
* can't even look up the name of their own machine.
* Too bad. We just give up and say it's not local.
*/
return false;
}
}
/**
* Get the ParamModel that corresponds to the operand
* (primary parameter). Return null if none.
*/
private ParamModel getOperandModel() {
for (ParamModel pm : commandModel.getParameters()) {
if (pm.getParam().primary())
return pm;
}
return null;
}
/**
* Get an option value, that might come from the command line
* or from the environment. Return the default value for the
* option if not otherwise specified.
*/
private String getOption(String name) {
String val = options.getOne(name);
if (val == null) {
val = getFromEnvironment(name);
}
if (val == null) {
// no value, find the default
ParamModel opt = commandModel.getModelFor(name);
// if no value was specified and there's a default value, return it
if (opt != null) {
String def = opt.getParam().defaultValue();
if (ok(def)) {
val = def;
}
}
}
return val;
}
private static boolean ok(String s) {
return s != null && s.length() > 0;
}
/** Can be called to start async preinitialisation. It can help a little
* bit in usage performance.
*/
public static void preinit() {
Thread thread = new Thread(new Runnable() {
@Override
public void run() {
ProprietaryReaderFactory.getReader(Class.class, "not/defined");
ProprietaryWriterFactory.getWriter(Class.class);
}
});
thread.setDaemon(true);
thread.start();
}
}