org.glassfish.connectors.config.ConnectorConnectionPool Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of payara-micro Show documentation
Show all versions of payara-micro Show documentation
Micro Distribution of the Payara Project for IBM JDK
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 2008-2013 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
* or packager/legal/LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at packager/legal/LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
//
// This file was generated by the JavaTM Architecture for XML Binding(JAXB) Reference Implementation, v2.1.3-04/12/2007 12:08 AM(kohsuke)-fcs
// See http://java.sun.com/xml/jaxb
// Any modifications to this file will be lost upon recompilation of the source schema.
// Generated on: 2007.08.24 at 01:25:15 PM PDT
//
package org.glassfish.connectors.config;
import com.sun.enterprise.config.serverbeans.Resource;
import com.sun.enterprise.config.serverbeans.ResourcePool;
import org.glassfish.connectors.config.validators.ConnectionPoolConstraint;
import org.glassfish.connectors.config.validators.ConnectionPoolConstraints;
import org.glassfish.connectors.config.validators.ConnectionPoolErrorMessages;
import org.glassfish.admin.cli.resources.UniqueResourceNameConstraint;
import org.glassfish.resourcebase.resources.ResourceTypeOrder;
import org.glassfish.resourcebase.resources.ResourceDeploymentOrder;
import org.jvnet.hk2.config.*;
import org.jvnet.hk2.config.types.Property;
import org.jvnet.hk2.config.types.PropertyBag;
import java.beans.PropertyVetoException;
import java.util.List;
import org.glassfish.api.admin.config.PropertiesDesc;
import org.glassfish.api.admin.RestRedirects;
import org.glassfish.api.admin.RestRedirect;
import org.glassfish.quality.ToDo;
import javax.validation.constraints.Max;
import javax.validation.constraints.Min;
import javax.validation.constraints.NotNull;
/**
* Defines configuration used to create and manage
* a pool of connections to a EIS. Pool definition is named, and can be referred
* to by multiple connector-resource elements (See connector-resource)
*
* Each named pool definition results in a pool instantiated at server start-up.
* Pool is populated when accessed for the first time. If two or more
* connector-resource elements point to the same connector-connection-pool
* element, they are using the same pool of connections, at run time
*
* There can be more than one pool for one connection-definition in one
* resource-adapter
*
*/
/* @XmlType(name = "", propOrder = {
"description",
"securityMap",
"property"
}) */
@Configured
@ConnectionPoolConstraints({
@ConnectionPoolConstraint(value = ConnectionPoolErrorMessages.MAX_STEADY_INVALID)
})
@RestRedirects({
@RestRedirect(opType = RestRedirect.OpType.POST, commandName = "create-connector-connection-pool"),
@RestRedirect(opType = RestRedirect.OpType.DELETE, commandName = "delete-connector-connection-pool")
})
@ResourceTypeOrder(deploymentOrder=ResourceDeploymentOrder.CONNECTOR_POOL)
@UniqueResourceNameConstraint(message="{resourcename.isnot.unique}", payload=ConnectorConnectionPool.class)
public interface ConnectorConnectionPool extends ConfigBeanProxy, Resource, ResourcePool,
PropertyBag {
/**
* Gets the value of the resourceAdapterName property.
*
* This is the name of resource adapter. Name of .rar file is taken as the
* unique name for the resource adapter.
*
* @param value allowed object is
* {@link String }
*/
@Attribute
@NotNull
String getResourceAdapterName();
/**
* Sets the value of the resourceAdapterName property.
*
* @param value allowed object is
* {@link String }
*/
void setResourceAdapterName(String value) throws PropertyVetoException;
/**
* Gets the value of the connectionDefinitionName property.
* Unique name, identifying one connection-definition in a Resource Adapter.
* Currently this is ConnectionFactory type.
*
* @return possible object is
* {@link String }
*/
@Attribute
@NotNull
String getConnectionDefinitionName();
/**
* Sets the value of the connectionDefinitionName property.
*
* @param value allowed object is
* {@link String }
*/
void setConnectionDefinitionName(String value) throws PropertyVetoException;
/**
* Gets the value of the steadyPoolSize property.
*
* Minimum and initial number of connections maintained in the pool
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="8")
@Min(value=0)
String getSteadyPoolSize();
/**
* Sets the value of the steadyPoolSize property.
*
* @param value allowed object is
* {@link String }
*/
void setSteadyPoolSize(String value) throws PropertyVetoException;
/**
* Gets the value of the maxPoolSize property.
*
* Maximum number of conections that can be created
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="32")
@Min(value=1)
String getMaxPoolSize();
/**
* Sets the value of the maxPoolSize property.
*
* @param value allowed object is
* {@link String }
*/
void setMaxPoolSize(String value) throws PropertyVetoException;
/**
* Gets the value of the maxWaitTimeInMillis property.
*
* Amount of time the caller will wait before getting a connection timeout.
* The default is 60 seconds. A value of 0 will force caller to wait
* indefinitely.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="60000")
@Min(value=0)
String getMaxWaitTimeInMillis();
/**
* Sets the value of the maxWaitTimeInMillis property.
*
* @param value allowed object is
* {@link String }
*/
void setMaxWaitTimeInMillis(String value) throws PropertyVetoException;
/**
* Gets the value of the poolResizeQuantity property.
*
* Number of connections to be removed when idle-timeout-in-seconds timer
* expires. Connections that have idled for longer than the timeout are
* candidates for removal. When the pool size reaches steady-pool-size,
* the connection removal stops.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="2")
@Min(value=1)
String getPoolResizeQuantity();
/**
* Sets the value of the poolResizeQuantity property.
*
* @param value allowed object is
* {@link String }
*/
void setPoolResizeQuantity(String value) throws PropertyVetoException;
/**
* Gets the value of the idleTimeoutInSeconds property.
*
* Maximum time in seconds, that a connection can remain idle in the pool.
* After this time, the pool implementation can close this connection.
*
* Note that this does not control connection timeouts enforced at the
* database server side. Adminsitrators are advised to keep this timeout
* shorter than the EIS connection timeout (if such timeouts are configured
* on the specific EIS), to prevent accumulation of unusable connection in
* Application Server.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="300")
@Min(value=1)
@Max(value=Integer.MAX_VALUE)
String getIdleTimeoutInSeconds();
/**
* Sets the value of the idleTimeoutInSeconds property.
*
* @param value allowed object is
* {@link String }
*/
void setIdleTimeoutInSeconds(String value) throws PropertyVetoException;
/**
* Gets the value of the failAllConnections property.
*
* Indicates if all connections in the pool must be closed should a single
* connection fail validation. The default is false. One attempt will be
* made to re-establish failed connections.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="false",dataType=Boolean.class)
String getFailAllConnections();
/**
* Sets the value of the failAllConnections property.
*
* @param value allowed object is
* {@link String }
*/
void setFailAllConnections(String value) throws PropertyVetoException;
/**
* Gets the value of the transactionSupport property.
*
* Indicates the level of transaction support that this pool will have.
* Possible values are "XATransaction", "LocalTransaction" & "NoTransaction"
* This attribute will override that transaction support attribute in the
* Resource Adapter in a downward compatible way, i.e it can support a lower
* or equal transaction level than specified in the RA, but not higher level
*
* @return possible object is
* {@link String }
*/
@Attribute
String getTransactionSupport();
/**
* Sets the value of the transactionSupport property.
*
* @param value allowed object is
* {@link String }
*/
void setTransactionSupport(String value) throws PropertyVetoException;
/**
* Gets the value of the isConnectionValidationRequired property.
*
* This attribute specifies if the connection that is about to be returned
* is to be validated by the container,
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="false",dataType=Boolean.class)
String getIsConnectionValidationRequired();
/**
* Sets the value of the isConnectionValidationRequired property.
*
* @param value allowed object is
* {@link String }
*/
void setIsConnectionValidationRequired(String value) throws PropertyVetoException;
/**
* Gets the value of the validateAtmostOncePeriodInSeconds property.
*
* Used to set the time-interval within which a connection is validated
* atmost once. Default is 0 which implies that it is not enabled.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="0")
@Min(value=0)
String getValidateAtmostOncePeriodInSeconds();
/**
* Sets the value of the validateAtmostOncePeriodInSeconds property.
*
* @param value allowed object is
* {@link String }
*/
void setValidateAtmostOncePeriodInSeconds(String value) throws PropertyVetoException;
/**
* Gets the value of the connectionLeakTimeoutInSeconds property.
*
* To aid user in detecting potential connection leaks by the application.
* When a connection is not returned back to the pool by the application
* within the specified period, it is assumed to be a potential leak and
* stack trace of the caller will be logged.
*
* Default is 0, which implies there is no leak detection, by default.
* A positive non-zero value turns on leak detection. Note however that,
* this attribute only detects if there is a connection leak. The connection
* can be reclaimed only if connection-leak-reclaim is set to true.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="0")
@Min(value=0)
String getConnectionLeakTimeoutInSeconds();
/**
* Sets the value of the connectionLeakTimeoutInSeconds property.
*
* @param value allowed object is
* {@link String }
*/
void setConnectionLeakTimeoutInSeconds(String value) throws PropertyVetoException;
/**
* Gets the value of the connectionLeakReclaim property.
* If enabled, connection will be reusable (put back into pool) after
* connection-leak-timeout-in-seconds occurs.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="false",dataType=Boolean.class)
String getConnectionLeakReclaim();
/**
* Sets the value of the connectionLeakReclaim property.
*
* @param value allowed object is
* {@link String }
*/
void setConnectionLeakReclaim(String value) throws PropertyVetoException;
/**
* Gets the value of the connectionCreationRetryAttempts property.
*
* The number of attempts to create a new connection. Default is 0,
* which implies no retries.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="0")
String getConnectionCreationRetryAttempts();
/**
* Sets the value of the connectionCreationRetryAttempts property.
*
* @param value allowed object is
* {@link String }
*/
void setConnectionCreationRetryAttempts(String value) throws PropertyVetoException;
/**
* Gets the value of the connectionCreationRetryIntervalInSeconds property.
*
* The time interval between retries while attempting to create a connection
* Default is 10 seconds. Effective when connection-creation-retry-attempts
* is greater than 0.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="10")
String getConnectionCreationRetryIntervalInSeconds();
/**
* Sets the value of the connectionCreationRetryIntervalInSeconds property.
*
* @param value allowed object is
* {@link String }
*/
void setConnectionCreationRetryIntervalInSeconds(String value) throws PropertyVetoException;
/**
* Gets the value of the lazyConnectionEnlistment property.
*
* Enlist a resource to the transaction only when it is actually used in a
* method, which avoids enlistment of connections that are not used in a
* transaction. This also prevents unnecessary enlistment of connections
* cached in the calling components. Default value is false.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="false",dataType=Boolean.class)
String getLazyConnectionEnlistment();
/**
* Sets the value of the lazyConnectionEnlistment property.
*
* @param value allowed object is
* {@link String }
*/
void setLazyConnectionEnlistment(String value) throws PropertyVetoException;
/**
* Gets the value of the lazyConnectionAssociation property.
*
* Connections are lazily associated when an operation is performed on them.
* Also, they are disassociated when the transaction is completed and a
* component method ends, which helps reuse of the physical connections.
* Default value is false.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="false",dataType=Boolean.class)
String getLazyConnectionAssociation();
/**
* Sets the value of the lazyConnectionAssociation property.
*
* @param value allowed object is
* {@link String }
*/
void setLazyConnectionAssociation(String value) throws PropertyVetoException;
/**
* Gets the value of the associateWithThread property.
*
* Associate a connection with the thread such that when the same thread is
* in need of a connection, it can reuse the connection already associated
* with that thread, thereby not incurring the overhead of getting a
* connection from the pool.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="false",dataType=Boolean.class)
String getAssociateWithThread();
/**
* Sets the value of the associateWithThread property.
*
* @param value allowed object is
* {@link String }
*/
void setAssociateWithThread(String value) throws PropertyVetoException;
/**
* Gets the value of the pooling property.
*
* Property to disable pooling for the pool.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="true",dataType=Boolean.class)
String getPooling();
/**
* Sets the value of the pooling property.
*
* @param value allowed object is
* {@link String }
*/
void setPooling(String value) throws PropertyVetoException;
/**
* Gets the value of the matchConnections property.
*
* To switch on/off connection matching for the pool. It can be set to false
* if the administrator knows that the connections in the pool will always
* be homogeneous and hence a connection picked from the pool need not be
* matched by the resource adapter. Default value is true.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="true",dataType=Boolean.class)
String getMatchConnections();
/**
* Sets the value of the matchConnections property.
*
* @param value allowed object is
* {@link String }
*/
void setMatchConnections(String value) throws PropertyVetoException;
/**
* Gets the value of the maxConnectionUsageCount property.
* When specified, connections will be re-used by the pool for the specified
* number of times after which it will be closed. This is useful for
* instance, to avoid statement-leaks. Default value is 0, which implies the
* feature is not enabled.
*
* @return possible object is
* {@link String }
*/
@Attribute (defaultValue="0")
@Min(value=0)
@Max(value=Integer.MAX_VALUE)
String getMaxConnectionUsageCount();
/**
* Sets the value of the maxConnectionUsageCount property.
*
* @param value allowed object is
* {@link String }
*/
void setMaxConnectionUsageCount(String value) throws PropertyVetoException;
/**
* Gets the value of the description property.
*
* @return possible object is
* {@link String }
*/
@Attribute
String getDescription();
/**
* Sets the value of the description property.
*
* @param value allowed object is
* {@link String }
*/
void setDescription(String value) throws PropertyVetoException;
/**
* Gets the value of the securityMap property.
*
*
* This accessor method returns a reference to the live list,
* not a snapshot. Therefore any modification you make to the
* returned list will be present inside the JAXB object.
* This is why there is not a set method for the securityMap property.
*
*
* For example, to add a new item, do as follows:
*
* getSecurityMap().add(newItem);
*
*
*
*
* Objects of the following type(s) are allowed in the list
* {@link SecurityMap }
*/
@Element
@NotNull
List getSecurityMap();
/**
* Properties as per {@link org.jvnet.hk2.config.types.PropertyBag}
*
* Properties are used to override the ManagedConnectionFactory javabean
* configuration settings. When one or more of these properties are
* specified, they are passed as is using set() methods to the
* Resource Adapter's ManagedConnectionfactory class (specified in ra.xml).
*
*/
@ToDo(priority=ToDo.Priority.IMPORTANT, details="Provide PropertyDesc for legal props" )
@PropertiesDesc(props={})
@Element
List getProperty();
@DuckTyped
String getIdentity();
class Duck {
public static String getIdentity(ConnectorConnectionPool resource){
return resource.getName();
}
}
}
© 2015 - 2024 Weber Informatics LLC | Privacy Policy