com.sun.enterprise.admin.cli.LocalStrings.properties Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of payara-micro Show documentation
Show all versions of payara-micro Show documentation
Micro Distribution of the Payara Project
#
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
#
# Copyright (c) 2011-2013 Oracle and/or its affiliates. All rights reserved.
#
# The contents of this file are subject to the terms of either the GNU
# General Public License Version 2 only ("GPL") or the Common Development
# and Distribution License("CDDL") (collectively, the "License"). You
# may not use this file except in compliance with the License. You can
# obtain a copy of the License at
# https://glassfish.dev.java.net/public/CDDL+GPL_1_1.html
# or packager/legal/LICENSE.txt. See the License for the specific
# language governing permissions and limitations under the License.
#
# When distributing the software, include this License Header Notice in each
# file and include the License file at packager/legal/LICENSE.txt.
#
# GPL Classpath Exception:
# Oracle designates this particular file as subject to the "Classpath"
# exception as provided by Oracle in the GPL Version 2 section of the License
# file that accompanied this code.
#
# Modifications:
# If applicable, add the following below the License Header, with the fields
# enclosed by brackets [] replaced by your own identifying information:
# "Portions Copyright [year] [name of copyright owner]"
#
# Contributor(s):
# If you wish your version of this file to be governed by only the CDDL or
# only the GPL Version 2, indicate your decision by adding "[Contributor]
# elects to include this software in this distribution under the [CDDL or GPL
# Version 2] license." If you don't indicate a single choice of license, a
# recipient has the option to distribute your version of this file under
# either the CDDL, the GPL Version 2 or to extend the choice of license to
# its licensees as provided above. However, if you add GPL Version 2 code
# and therefore, elected the GPL Version 2 license, then the option applies
# only if the new code is made subject to such option by the copyright
# holder.
#
# Portions Copyright [2019-2021] Payara Foundation and/or affiliates
CommandSuccessful=Command {0} executed successfully.
CommandSuccessfulWithWarnings=Command {0} completed with warnings.
CommandSuccessfulStarted=Command {0} started successfully
CommandUnSuccessful=Command {0} failed.
CommandUnSuccessfulWithArg=Command {0} failed: {1}
ExtDirMissing=Warning: admin command extension directory is missing: {0}
ExtDirFailed=Error loading admin command extensions: {0}
DirError=Cannot read directory: {0}
DomainPasswordChanged=Master password changed for domain {0}
DomainCreated=Domain {0} created.
DomainDeleted=Domain {0} deleted.
# Observe the hidden trailing space after prompt strings. Could be handled better ...
AdminUserPrompt=Enter admin user name [Enter to accept default]>
AdminPasswordPrompt=Enter admin password>
AliasPasswordPrompt=Enter alias password>
AdminPasswordConfirmationPrompt=Enter admin password again>
AliasPasswordConfirmationPrompt=Enter alias password again>
DomainExists=Domain exists: {0}
AdminPassword=admin password
InvalidPortRangeMsg=Invalid Port for {0}, should be between 1 and 65535. Using {1}
NewPasswordPrompt=Enter {0} password>
NewPasswordDefaultEmptyPrompt=Enter {0} password [Enter to accept default of no password]>
NewPasswordDefaultPrompt=Enter {0} password [Enter to accept default password "{1}"]>
NewPasswordConfirmationPrompt=Enter {0} password again>
NewPasswordDescriptionPrompt={0}>
NewPasswordDescriptionDefaultEmptyPrompt={0} [Enter to accept default of no password]>
NewPasswordDescriptionDefaultPrompt={0} [Enter to accept default password "{1}"]>
MasterPasswordConfirmationPrompt=Enter the master password again>
MasterPasswordConfirmationWithDefaultPrompt=Enter master password again [Enter to accept default]>
MasterPasswordWithDefaultPrompt=Enter master password [Enter to accept default]>
PortNotSpecified=Port for {0} is not specified. Using {1}
PortInUseError=Port for {0} ({1}) is in use. Try a different port number.
PortInUseWarning=Warning: Port {0} is in use. Ignoring since the checkports option is set to false.
NoPermissionForPortError=You do not have permission to use port {0} for {1}. Try a different port number or login to a more privileged account.
NoPermissionForPortMsg=You do not have permission to use port {0} for {1}. Try a different port number or login to a more privileged account.
NoPermissionForPortWarning=Warning: You do not have permission to use port {0} for {1}. Ignoring since the checkports option is set to false.
UnknownPortMsg=Unknown error when trying port {0}. Try a different port number.
DefaultPortInUse=Default port {1} for {0} is in use. Using {2}
UsingDefaultPort=Using default port {1} for {0}.
UsingPort=Using port {1} for {0}.
PortPrivilege=On Unix platform, port numbers below 1024 may require special privileges.
RequireEitherOrOption=Option {0} or {1} must be specified.
UsingProfile=Domain being created with profile:{0}, as specified {1}.
LoginInfoStored=Login information relevant to admin user name [{0}] for host [{1}] and admin port [{2}] stored at [{3}] successfully.\nMake sure that this file remains protected. Information stored in this file will be used by administration commands to manage associated domain.
LoginInfoStoredCreateDomain=Login information relevant to admin user name [{0}] for this domain [{1}] stored at [{2}] successfully.\nMake sure that this file remains protected. Information stored in this file will be used by administration commands to manage this domain.
LoginInfoNotStored=Login information is not saved for host name [{0}] and port [{1}]
AuthenticatingMsg=Trying to authenticate for administration of server at host [{0}] and port [{1}] ...
LoginInfoNotStoredCreateDomain=Login information relevant to the admin user name [{0}] for this domain [{1}] could not be stored.\nThe .gfclient/pass file in the home directory may be corrupt.\nCheck the format of this file.
OverwriteLoginMsgCreateDomain=Admin login information for host [{0}] and port [{1}] is being overwritten with credentials provided. This is because the --savelogin option was used during create-domain command.
LoginInfoCouldNotBeRead=Login information could not be read for host name [{0}] and port [{1}]
ConnectException=Remote server does not listen for requests on [{0}:{1}].\nPlease make sure the server is running.
InvalidCredentials=Authorization has been refused for credentials [user: {0}] given in this request.\n(Usually, this means invalid user name and/or password)
#Error Messages
PasswordLimit=CLI128: Value for {0} must have 8 or more characters.
InvalidCharInDomain=CLI129: Invalid character in domain name, {0}
CouldNotCreateDomain=CLI130: Could not create domain, {0}
InvalidPortNumber=CLI136: Port {0} should be a numeric value.
InvalidDomainPath=CLI138: Invalid domain path, {0}
CouldNotDeleteDomain=CLI139: Could not delete domain, {0}.
NoDomainsToList=CLI141: No Domains to list.
NoDomains=CLI142: No domains in {0}.
FileDoesNotExist=CLI146: {0} does not exist in the file system or read permission denied.
DomainXMLDoesNotExist=CLI155: {0} does not exist.
InvalidPortRange=CLI160: Invalid Port {0}, should be between 1 and 65535.
OptionsDoNotMatch=CLI173: Values entered for {0} do not match.
InvalidPortBaseRange=CLI211: Invalid Port {0} for {1}, should be between 1 and 65535. Choose a portbase value such that the resulting port number does not exceed 65535.
MutuallyExclusiveOption=CLI169: Options {0} and {1} are mutually exclusive. You must specify one or the other but not both.
UnsupportedLegacyCommand=CLI194: Previously supported command: {0} is not supported for this release.
NoScope=CLI195: Implementation for the command {0} exists in the system,\nbut it has no @Scoped annotation
HasParams=CLI196: Implementation for the command {0} exists in the system,\nbut it's a singleton that also has parameters
MissingDefaultPort=No (default) value specific for {0}
###
listCommands.notBoth=You can't specify both --localonly and --remoteonly as true at the same time.
listCommands.localCommandHeader=********** Local Commands **********
listCommands.localCommandNoMatch=No local commands match.
listCommands.remoteCommandHeader=********** Remote Commands **********
listCommands.remoteCommandNoMatch=No remote commands match.
remote.noargs=Invalid call to RemoteCommand with no arguments.
Usage=Usage: {0}
Usage.brief={0} [{0}-utility-options]
Usage.default=(default:{0})
Usage.full=Usage: {0} [-H|--host ]\n\t[-p|--port ] [-u|--user ]\n\t[-W|--passwordfile ]\n\t[-t|--terse[=]]\n\t[-s|--secure[=]]\n\t[-e|--echo[=]]\n\t[-I|--interactive[=]]\n\t[-?|--help[=] \n\t[--detach(default:false)] \n\t[--notify(default:false)] [subcommand [options] [operands]]
OptionDeprecated=Option {0} deprecated.
OptionDeprecatedUseNew=Option {0} deprecated, use --{1} instead.
UnableToReadEnv=Unable to read system environment. No system environment will be used.
ClosestMatchedCommands=Closest matching command(s):
ClosestMatchedLocalAndRemoteCommands=Closest matching local and remote command(s):
ClosestMatchedLocalCommands=Unable to get remote commands. \nClosest matching local command(s):
#Error Messages
InvalidCommand=CLI001: Invalid Command: {0}. Check the entry of command name. This command may be provided by a package that is not installed.
UnableToCreateCommand=CLI002: Unable to create command object, {0}
NoDescriptorsDefined=CLI003: No descriptors defined.
CouldNotLoadDescriptor=CLI004: Could not load the descriptor URLs.
CouldNotWriteCommandToFile=CLI005: Could not write the command, {0} to a file.
CouldNotWriteComponentToFile=CLI006: Could not write the component, {0} to a file.
InvalidFilePath=CLI007: Invalid file path, {0}.
CouldNoSetSerializeDirectory=CLI008: Could not set the serialize directory.
CouldNotFindLocalStringsProperties=CLI009: Could not find LocalStrings.properties file.
OptionValueNotSpecified=CLI010: Value not specified for {0}
NoSuchOption=CLI011: Invalid option, {0}
CouldNotValidateCommand=CLI012: Could not validate command.
InvalidOption=CLI013: Option {0} does not apply to {1}.
OptionIsRequired=CLI014: {0} is a required option. In case of password information, use passwordfile option.
OptionIsBoolean=CLI015: Invalid value for {0}. Option accepts true or false.
ZeroOrOneOperand=CLI016: Invalid number of operands. Number of operands should be 0 or 1.
GreaterThanOneOperand=CLI017: Invalid number of operands. Number of operands should be greater than 1.
GreaterOrEqualToOperand=CLI018: Invalid number of operands. Number of operands should be greater than or equal to {0}.
EqualToOperand=CLI019: Invalid number of operands. Number of operands should be equal to {0}.
OperandIsRequired=CLI020: Operand is required.
BetweenNumberOperand=CLI021: Number of operand should be between {0} and {1}.
InvalidSytanxForNumberOfOperands=CLI022: Invalid syntax for numberofoperands,{0}.
CommandNotSpecified=CLI023: Command not specified.
CouldNotReadInputStream=CLI024: Could not read input stream.
RequireEscapeChar=CLI025: An escape character is required in your input.
DuplicateOptionDeclaration=CLI026: Multiple declaration of option "{0}" in the descriptor file.
RequiredOptionNotDefined=CLI028: RequiredOption "{0}" is not defined in descriptor file.
DeprecatedOptionNotDefined=CLI028: DeprecatedOption "{0}" is not defined in descriptor file.
OptionAlreadyDefined=CLI029: Option name "{0}" is already defined in command, "{1}".
ShortOptionAlreadyDefined=CLI030: Short Option "{0}" for options "{1}" and "{2}" is already defined in command, "{3}".
ObsoleteOption=CLI031: Warning: Option "{0}" is obsolete and will be ignored.
PasswordsNotAllowedOnCommandLine=CLI193: Password option "{0}" is not allowed on the command line. Please use the --passwordfile option or the admin command's login sub-command.
commands.monitor.press_to_quit=Press 'q' or 'Q' to quit.
InvalidRemoteCommand=No such local command: {0}. Unable to access the server to execute the command remotely. Verify the server is available.
remote.version.failed=Version string could not be obtained from Server [{0}:{1}].
remote.version.failed.debug= (Turn debugging on e.g. by setting {0}=true in your environment, to see the details.)
version.local=Using locally retrieved version string from version class.\nVersion = {0}
# do not translate Java Runtime Environment
version.local.java=admin client Java runtime environment version: {0}
version.remote=Version = {0}
version.optionerror1=Specify terse or verbose but not both.
awt.error=Unable to process auto quit because of awt exception {0}
LocalRemoteCommand.errorRemote=Error encountered while making remote call: {0}
unknownOption=Command {0} does not have an option {1}
notEnoughOperands=Command {0} requires an operand of type {1}
noOperandsAllowed=Command {0} does not accept any operands
tooManyOperands1=Command {0} only accepts one operand
tooManyOperands=Command {0} only accepts {1} operands
missingPassword=Command {0} requires a password named {1}
missingPasswordAdvice=Command {0} requires a password named {1}\nAdd a line of the following form to a password file:\n{1}=yourpassword\nSpecify the password file using the --passwordfile option when invoking the command.
missingOption=Option {0} is required but was not specified
missingOptions=Command {0} is missing required options
# The q in this prompt is translatable using the "ManpageQuit" message string, "enter" is the keyboard key
ManpagePrompt=More? (enter to continue, \'q\' to quit)
# This value also appears int he "ManpagePrompt" message string
ManpageQuit=q
ManpageMissing=Cannot find man page for command: {0}
multimodeIntro=Use "exit" to exit and "help" for online help.
badEnvVarSet=CLI148: Could not set environment variable: {0}\nVariable names must start with "{1}".
badEnvVarUnset=CLI163: Could not unset environment variable: {0}\nVariable names must start with "{1}".
cantRemoveEnvVar=CLI149: Environment variable is not set: {0}
operandPrompt=Enter the value for the {0} operand>
optionPrompt=Enter the value for the {0} option>
DeprecatedSyntax=Deprecated syntax, instead use:
## Parser
parser.noValueAllowed=Option may not have value: {0}
parser.illegalNo="--no" illegal with non-boolean option: {0}
parser.invalidOption=Invalid option: {0}
parser.invalidOptions=Invalid options: {0}
parser.nonbooleanNotAllowed=Non-boolean option: {0}, not allowed in argument: {1}
parser.missingValue=Missing value for option: {0}
parser.invalidFileEx=Invalid file for option: --{0}: {1}
parser.invalidFile=Invalid file for option: {0}, File: {1}
parser.invalidBoolean=Invalid boolean value for option: {0}, Value: {1}
parser.passwordNotAllowed=Password not allowed on command line: {0}
parser.noRepeats=Repeats not allowed for option: {0}
## ArgumentTokenizer
stopwatch=Total Time to Launch: {0} msec
token.unbalancedQuotes=Unbalanced quotes
token.escapeAtEOL=Escape at end of line
token.noMoreTokens=No more tokens
runscript.badport=Bad httpport argument({0}). It must be an integer between 1 and 65535 inclusive.
runscript.noscriptname=The java script filename is required.
runscript.badscriptname=The java script filename({0}) does not exist.
internal_error=Internal Error: {0}