nom.tam.fits.header.ObservationDurationDescription Maven / Gradle / Ivy

Go to download
Show more of this group Show more artifacts with this name
Show all versions of nom-tam-fits Show documentation
Java library for reading and writing FITS files. FITS, the Flexible Image Transport System, is the format commonly used in the archiving and transport of astronomical data.
There is a newer version: 1.20.2
Show newest version
package nom.tam.fits.header;

/*
 * #%L
 * nom.tam FITS library
 * %%
 * Copyright (C) 1996 - 2015 nom-tam-fits
 * %%
 * This is free and unencumbered software released into the public domain.
 * 
 * Anyone is free to copy, modify, publish, use, compile, sell, or
 * distribute this software, either in source code form or as a compiled
 * binary, for any purpose, commercial or non-commercial, and by any
 * means.
 * 
 * In jurisdictions that recognize copyright laws, the author or authors
 * of this software dedicate any and all copyright interest in the
 * software to the public domain. We make this dedication for the benefit
 * of the public at large and to the detriment of our heirs and
 * successors. We intend this dedication to be an overt act of
 * relinquishment in perpetuity of all present and future rights to this
 * software under copyright law.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 * #L%
 */

/**
 * This data dictionary contains FITS keywords that have been widely used within
 * the astronomical community. It is recommended that these keywords only be
 * used as defined here. These are the Keywords that describe the observation.
 * 
 *  * @see http://heasarc.gsfc.nasa.gov/docs/fcg/common_dict.html
 * 
 * 
 * @author Richard van Nieuwenhoven
 */
public enum ObservationDurationDescription implements IFitsHeader {
    /**
     * The value field shall contain a character string that gives the date on
     * which the observation ended. This keyword has the same format, and is
     * used in conjunction with, the standard DATA-OBS keyword that gives the
     * starting date of the observation. These 2 keywords may give either the
     * calendar date using the 'yyyy-mm-dd' format, or may give the full date
     * and time using the 'yyyy-mm-ddThh:mm:ss.sss' format.
     */
    DATE_END("DATE-END", SOURCE.HEASARC, HDU.ANY, VALUE.STRING, "date of the end of observation"),
    /**
     * The value field shall contain a floating point number giving the
     * difference between the stop and start times of the observation in units
     * of seconds. This keyword is synonymous with the TELAPSE keyword.
     */
    ELAPTIME(SOURCE.UCOLICK, HDU.ANY, VALUE.REAL, "elapsed time of the observation"),
    /**
     * The value field shall contain a floating point number giving the exposure
     * time of the observation in units of seconds. The exact definition of
     * 'exposure time' is mission dependent and may, for example, include
     * corrections for shutter open and close duration, detector dead time,
     * vignetting, or other effects. This keyword is synonymous with the EXPTIME
     * keyword.
     */
    EXPOSURE(SOURCE.HEASARC, HDU.ANY, VALUE.REAL, "exposure time"),
    /**
     * The value field shall contain a floating point number giving the exposure
     * time of the observation in units of seconds. The exact definition of
     * 'exposure time' is mission dependent and may, for example, include
     * corrections for shutter open and close duration, detector dead time,
     * vignetting, or other effects. This keyword is synonymous with the
     * EXPOSURE keyword.
     */
    EXPTIME(SOURCE.NOAO, HDU.ANY, VALUE.REAL, "exposure time"),
    /**
     * The value field shall contain a floating point number giving the total
     * integrated exposure time in units of seconds corrected for detector 'dead
     * time' effects which reduce the net efficiency of the detector. The ratio
     * of LIVETIME/ONTIME gives the mean dead time correction during the
     * observation, which lies in the range 0.0 to 1.0.
     */
    LIVETIME(SOURCE.HEASARC, HDU.ANY, VALUE.REAL, "exposure time after deadtime correction"),
    /**
     * The value field shall contain a floating point number giving the total
     * integrated exposure time of the observation in units of seconds. ONTIME
     * may be less than TELAPSE if there were intevals during the observation in
     * which the target was not observed (e.g., the shutter was closed, or the
     * detector power was turned off).
     */
    ONTIME(SOURCE.HEASARC, HDU.ANY, VALUE.REAL, "integration time during the observation"),
    /**
     * The value field shall contain a floating point number giving the
     * difference between the stop and start times of the observation in units
     * of seconds. This keyword is synonymous with the ELAPTIME keyword.
     */
    TELAPSE(SOURCE.HEASARC, HDU.ANY, VALUE.REAL, "elapsed time of the observation"),
    /**
     * The value field shall contain a character string that gives the time at
     * which the observation ended. This keyword is used in conjunction with the
     * DATE-END keyword to give the ending time of the observation; the DATE-END
     * keyword gives the ending calendar date, with format 'yyyy-mm-dd', and
     * TIME-END gives the time within that day using the format
     * 'hh:mm:ss.sss...'. This keyword should not be used if the time is
     * included directly as part of the DATE-END keyword value with the format
     * 'yyyy-mm-ddThh:mm:ss.sss'.
     */
    TIME_END("TIME-END", SOURCE.HEASARC, HDU.ANY, VALUE.STRING, "time at the end of the observation"),
    /**
     * The value field shall contain a character string that gives the time at
     * which the observation started. This keyword is used in conjunction with
     * the standard DATE-OBS keyword to give the starting time of the
     * observation; the DATE-OBS keyword gives the starting calendar date, with
     * format 'yyyy-mm-dd', and TIME-OBS gives the time within that day using
     * the format 'hh:mm:ss.sss...'. This keyword should not be used if the time
     * is included directly as part of the DATE-OBS keyword value with the
     * format 'yyyy-mm-ddThh:mm:ss.sss'.
     */
    TIME_OBS("TIME-OBS", SOURCE.HEASARC, HDU.ANY, VALUE.STRING, "time at the start of the observation");

    @SuppressWarnings("CPD-START")
    private final IFitsHeader key;

    ObservationDurationDescription(SOURCE status, HDU hdu, VALUE valueType, String comment) {
        this.key = new FitsHeaderImpl(name(), status, hdu, valueType, comment);
    }

    ObservationDurationDescription(String key, SOURCE status, HDU hdu, VALUE valueType, String comment) {
        this.key = new FitsHeaderImpl(key == null ? name() : key, status, hdu, valueType, comment);
    }

    @Override
    public String comment() {
        return this.key.comment();
    }

    @Override
    public HDU hdu() {
        return this.key.hdu();
    }

    @Override
    public String key() {
        return this.key.key();
    }

    @Override
    public IFitsHeader n(int... number) {
        return this.key.n(number);
    }

    @Override
    public SOURCE status() {
        return this.key.status();
    }

    @Override
    @SuppressWarnings("CPD-END")
    public VALUE valueType() {
        return this.key.valueType();
    }

}