messages.engine.messages.properties Maven / Gradle / Ivy
AttrType.sys\:CredentialRequirements.desc=Defines which credential requirements are set for the owner
AttrType.sys\:Preferences.desc=Preferences of the user
AttrType.sys\:AttributeClasses.desc=Attribute classes of the user
AttrType.sys\:Credential\:.desc=Credential of {0}
AttrType.sys\:AuthorizationRole.displayedName=Authorization role
AttrType.sys\:AuthorizationRole.desc=Defines what operations are allowed for the bearer. \
The attribute of this type defines the access in the group where it is defined and in all subgroups. \
In subgroup it can be redefined to grant more access. Roles:\n {0}
AttrType.sys\:LastAuthentication.desc=Stores date and time of the last successful authentication. \
The format is ISO time in UTC time zone with seconds precision, e.g.: 2011-12-03T10:15:30
AttrType.sys\:ProjectManagementRole.desc=Controls authorization level in UpMan (Unity projects management). Must be set in the delegated group of the project. Roles:\n {0}
AttrType.name.displayedName=Name
AttrType.name.desc=Name
AttrType.height.displayedName=Height
AttrType.height.desc=Height provides information on user's height
AttrType.weight.displayedName=Weight
AttrType.weight.desc=Weight provides information on user's weight
CredDef.standardPassword.desc=Default password credential with typical security settings.
CredentialRequirements.systemCredentialRequirements.desc=All credentials
DefaultOutputTranslationProfile.attr.memberOf=Member of
DefaultOutputTranslationProfile.attr.memberOfDesc=Groups membership
EntityAction.removeEntity.desc=Allows for removing an entity
EntityAction.changeStatus.desc=Allows for changing entity status
EntityAction.changeStatus.paramDesc.status=New entity status
EntityAction.sendMessage.desc=Allows for sending a message to entity
EntityAction.sendMessage.paramDesc.message=Message to be sent
RegTranslationAction.submissionMessage.desc=Allows to set a message that is shown after request submission
RegTranslationAction.submissionMessage.paramDesc.message=Message body
RegTranslationAction.submissionMessage.paramDesc.caption=Message header
RegTranslationAction.addAttribute.editor.title=Attribute value expression editor
RegTranslationAction.addAttribute.editor.evalTo=list of attribute values
RegTranslationAction.addAttribute.desc=Assigns an additional attribute to those requested
RegTranslationAction.addAttribute.paramDesc.attributeName=Attribute name
RegTranslationAction.addAttribute.paramDesc.group=Group of the attribute
RegTranslationAction.addAttribute.paramDesc.expression=MVEL expression which must evaluate to object or list \
of objects. The evaluation result will be used as attribute value(s).
RegTranslationAction.addAttribute.paramDesc.visibility=Visibility of the attribute
RegTranslationAction.addIdentity.editor.title=Identity value expression editor
RegTranslationAction.addIdentity.editor.evalTo=identity value
RegTranslationAction.addIdentity.desc=Creates a new identity and adds it to those requested
RegTranslationAction.addIdentity.paramDesc.identityType=Identity type
RegTranslationAction.addIdentity.paramDesc.identity=MVEL expression which must evaluate to String. The evaluation \
result will be used as identity value.
RegTranslationAction.addToGroup.editor.title=Group value expression editor
RegTranslationAction.addToGroup.editor.evalTo=group path
RegTranslationAction.addToGroup.desc=Requests addition to an additional group
RegTranslationAction.addToGroup.paramDesc.group=Group where the mebership is requested
RegTranslationAction.autoProcess.desc=Allows for automatic processing of the request. The effect of this action is \
applied only after the whole profile is executed.
RegTranslationAction.autoProcess.paramDesc.action=Desired action to take on the request, when the rule condition's \
is true.
RegTranslationAction.autoProcessInvitations.desc=Allows for automatic processing of invitation requests. The effect \
is that all invitations, sent to the entity for which current registration is performed, are automatically applied. \
Each of such invitations has its all prefilled and hidden elements applied to the user. All invitations for the \
registered person will be eventually removed.
RegTranslationAction.autoProcessInvitations.paramDesc.registrationForm=The invitations of selected registration form \
will be processed. When the field is not set, then all invitations are processed.
RegTranslationAction.confirmationRedirect.editor.title=Redirect url expression editor
RegTranslationAction.confirmationRedirect.editor.evalTo=redirect url
RegTranslationAction.confirmationRedirect.desc=This is a special action, it is executed only when registration \
request element (such as email attribute) is confirmed. If the rule's condition is true, then the returned URL is \
used to redirect the web browser to after the confirmation, instead of showing the standard confirmation screen.
RegTranslationAction.confirmationRedirect.paramDesc.URL=MVEL expression which must evaluate to a redirect URL.
RegTranslationAction.regFilterAttribute.editor.title=Attributes names expression editor
RegTranslationAction.regFilterAttribute.editor.evalTo=list of attributes names
RegTranslationAction.regFilterAttribute.desc=Allows for removing some of the attributes requested.
RegTranslationAction.regFilterAttribute.paramDesc.attribute=Regular expression which should match the attribute names.
RegTranslationAction.regFilterAttribute.paramDesc.group=Group of the filtered attributes.
RegTranslationAction.regFilterGroup.editor.title=Filter groups names expression editor
RegTranslationAction.regFilterGroup.editor.evalTo=list of groups names
RegTranslationAction.regFilterGroup.desc=Allows for removing some of the requested group memberships.
RegTranslationAction.regFilterGroup.paramDesc.group=Groups matching this regular expression will be removed.
RegTranslationAction.regFilterIdentity.editor.title=Filter identity expression editor
RegTranslationAction.regFilterIdentity.editor.evalTo=list of identity values
RegTranslationAction.regFilterIdentity.desc=Allows for removing some of the requested identities.
RegTranslationAction.regFilterIdentity.paramDesc.identity=Identities matching this regular expression will be removed.
RegTranslationAction.regFilterIdentity.paramDesc.identityType=Identity type to be removed.
RegTranslationAction.redirect.editor.title=Redirect url expression editor
RegTranslationAction.redirect.editor.evalTo=url
RegTranslationAction.redirect.desc=This is a special action, it is executed immediately after a registration form is \
filled. It is executed even when the form is cancelled. In any case, if the rule's condition is true,
then the returned URL is used to redirect the web browser, instead of showing the standard popup \
with information on the processing status.
RegTranslationAction.redirect.paramDesc.URL=MVEL expression which must evaluate to a redirect URL.
RegTranslationAction.scheduleChange.desc=Schedules a change of the created entity.
RegTranslationAction.scheduleChange.paramDesc.scheduleChange=A change of the entity state to be scheduled for future.
RegTranslationAction.scheduleChange.paramDesc.scheduledTime=Number of days after which the operation should be invoked.
RegTranslationAction.setCredReq.desc=Sets a non-default credential requirement for the entity being registered.
RegTranslationAction.setCredReq.paramDesc.credentialRequirement=Credential requirement to be set.
RegTranslationAction.setState.desc=Sets an initial state of the registered entity.
RegTranslationAction.setState.paramDesc.state=An initial state.
RegTranslationAction.addAttributeClass.editor.title=Attribute class name expression editor
RegTranslationAction.addAttributeClass.editor.evalTo=attribute class name
RegTranslationAction.addAttributeClass.desc=Assigns a given attribute class to the registered entity in some group.
RegTranslationAction.addAttributeClass.paramDesc.group=Group where the class will be set
RegTranslationAction.addAttributeClass.paramDesc.ac=MVEL expression which must evaluate to an attribute class name.
RegTranslationAction.setMFAPreference.desc=Sets status of the two step authentication user's preference.
RegTranslationAction.setMFAPreference.paramDesc.enabled=Enable or disable.
TranslationAction.mapIdentity.editor.title=Map identity expression editor
TranslationAction.mapIdentity.editor.evalTo=identity value
TranslationAction.mapIdentity.desc=Assigns a Unity identity to the remotely authenticated principal. Typically this is identity provided by the external provider or one of the provided attributes.
TranslationAction.mapIdentity.paramDesc.unityIdentityType=Resulting, Unity identity type
TranslationAction.mapIdentity.paramDesc.expression=MVEL expression which must evaluate to String. The evaluation result will be used as identity value.
TranslationAction.mapIdentity.paramDesc.credentialRequirement=Credential requirement that should be used for the identity, what is only required if the identity is going to be automatically created.
TranslationAction.mapIdentity.paramDesc.effect=Defines whether this identity should be created or rather used to find out existing identity in the database.
TranslationAction.mapAttribute.editor.title=Map attribute expression editor
TranslationAction.mapAttribute.editor.evalTo=list of attribute values
TranslationAction.mapAttribute.desc=Assigns a Unity attribute to the remotely authenticated principal.
TranslationAction.mapAttribute.paramDesc.unityAttribute=A unity name of an attribute.
TranslationAction.mapAttribute.paramDesc.group=A local group of the assigned attribute.
TranslationAction.mapAttribute.paramDesc.expression=MVEL expression which must evaluate to object or list of objects. The evaluation result will be used as attribute value(s).
TranslationAction.mapAttribute.paramDesc.visibility=Defines visibility of the mapped attribute. Useful only when the attribute is created.
TranslationAction.mapAttribute.paramDesc.effect=Defines whether this attribute should be created or updated.
TranslationAction.multiMapAttribute.desc=Maps multiple remote attributes to unity attributes, using the unmodified remote values.
TranslationAction.multiMapAttribute.paramDesc.mapping=The mapping must contain arbitrary number of lines,\
each of them following the syntax:
\
REMOTE-ATTRIBUTE UNITY-ATTRIBUTE UNITY-GROUP
\
The mapping must be provided with neither quotations nor escaping (spaces are forbidden).
TranslationAction.mapGroup.editor.title=Map group expression editor
TranslationAction.mapGroup.editor.evalTo=list of groups names
TranslationAction.mapGroup.desc=Assigns a Unity group or groups to the remotely authenticated principal.
TranslationAction.mapGroup.paramDesc.expression=MVEL expression which must evaluate to a string or list of strings. The evaluation result will be used as a group (or groups) where the principal will be added.
TranslationAction.mapGroup.paramDesc.createMissing=Controls whether a target groups should be created in Unity if it is missing.
TranslationAction.changeStatus.desc=Schedules a change of the mapped/created entity.
TranslationAction.changeStatus.paramDesc.scheduleChange=A change of the entity state to be scheduled for future.
TranslationAction.changeStatus.paramDesc.scheduledTime=Number of days after which the operation should be invoked.
TranslationAction.removeStaleData.desc=If this action is added then Unity will remove all the attributes, identities \
and group memberships that were added by this profile during previous logins but is not valid with respect to the current profile invocation.
TranslationAction.includeInputProfile.desc=Include all rules from another input translation profile.
TranslationAction.includeInputProfile.paramDesc.inputProfile=Input translation profile.
TranslationAction.includeOutputProfile.desc=Include all rules from another output translation profile.
TranslationAction.includeOutputProfile.paramDesc.outputProfile=Output translation profile.
TranslationAction.createAttribute.editor.title=Attribute values expression editor
TranslationAction.createAttribute.editor.evalTo=list of attribute values
TranslationAction.createAttribute.desc=Creates a new attribute which is returned to the client.
TranslationAction.createAttribute.paramDesc.attributeName=The name of the attribute being created.
TranslationAction.createAttribute.paramDesc.expression=MVEL expression, which should evaluate either to list of \
strings or to a single string object. The result of the evaluation will be used as the attribute value(s).
TranslationAction.createAttribute.paramDesc.attributeDisplayName=The displayed name of the attribute being created
TranslationAction.createAttribute.paramDesc.attributeDescription=Description of the attribute being created
TranslationAction.createAttribute.paramDesc.mandatory=Indicates if user can remove the attribute from the released \
ones on the consent screen (relevant only if editing of released information is enabled for user).
TranslationAction.createAttribute.paramDesc.type=Hint helping to determine the type of the created value. Note that \
mapping of the type of the created attribute to the protocol message is protocol dependent (e.g. type may be ignored).
TranslationAction.mapAttributeName.desc=Creates a new attribute based on unity attribute which is returned to the client.
TranslationAction.mapAttributeName.paramDesc.unityAttribute=The name of the attribute being mapped.
TranslationAction.mapAttributeName.paramDesc.attributeName=The name of the attribute being created.
TranslationAction.mapAttributeName.paramDesc.attributeDisplayName=The displayed name of the attribute being mapped
TranslationAction.mapAttributeName.paramDesc.attributeDescription=Description of the attribute being mapped
TranslationAction.mapAttributeName.paramDesc.mandatory=Indicates if user can remove the attribute from the released \
ones on the consent screen (relevant only if editing of released information is enabled for user).
TranslationAction.out-redirect.editor.title=Redirect URL expression editor
TranslationAction.out-redirect.editor.evalTo=URL
TranslationAction.out-redirect.desc=Redirects a user to a given URLafter execution of the whole profile.
TranslationAction.out-redirect.paramDesc.URL=MVEL expression which should evaluate to the redirect URL
TranslationAction.filterAttribute.editor.title=Filter attribute expression editor
TranslationAction.filterAttribute.editor.evalTo=attributes
TranslationAction.filterAttribute.desc=Allows to filter (hide) attributes by name
TranslationAction.filterAttribute.paramDesc.attributeRegexp=Attributes matching this regular expression will be hidden
TranslationAction.unfilterAttribute.editor.title=Unfilter attribute expression editor
TranslationAction.unfilterAttribute.editor.evalTo=list of attributes names
TranslationAction.unfilterAttribute.desc=Allows to re-add previously filtered attributes by name. Useful for remove all and add selected scenario.
TranslationAction.unfilterAttribute.paramDesc.attributeRegexp=Attributes matching this regular expression will be re-added, if are not present in the context.
TranslationAction.filterIdentity.editor.title=Filter identity value expression editor
TranslationAction.filterIdentity.editor.evalTo=identity value
TranslationAction.filterIdentity.desc=Filters identities using regular expression and/or identity type
TranslationAction.filterIdentity.paramDesc.idType=Identity type
TranslationAction.filterIdentity.paramDesc.idValueReqexp=Regular expression matching identity value
TranslationAction.filterAttributeValue.editor.title=Filter attribute values expression editor
TranslationAction.filterAttributeValue.editor.evalTo=list of attribue values
TranslationAction.filterAttributeValues.desc=Filters particular values of a given attribute using regular expression.
TranslationAction.filterAttributeValue.paramDesc.attribute=Attribute to have values filtered
TranslationAction.filterAttributeValue.paramDesc.attributeValueRegexp=Regular expression matching the (string representation) of values.
TranslationAction.createIdentity.editor.title=Identity value expression editor
TranslationAction.createIdentity.editor.evalTo=identity value
TranslationAction.createIdentity.desc=Creates a new identity at runtime. The created identity is returned to the client but it is volatile, the client won''t be able to query about this identity.
TranslationAction.createIdentity.paramDesc.idType=Identity type to be created. Arbitrary string.
TranslationAction.createIdentity.paramDesc.idValueExpression=MVEL expression which should evaluate to the new identity value
TranslationAction.createPersistedIdentity.editor.title=Identity value expression editor
TranslationAction.createPersistedIdentity.editor.evalTo=identity value
TranslationAction.createPersistedIdentity.desc=Creates a new identity at runtime. The created identity is returned to the client and is persisted in the Unity database as an additional identity of the entity processed by the profile.
TranslationAction.createPersistedIdentity.paramDesc.idType=Unity type of the identity to be created.
TranslationAction.createPersistedIdentity.paramDesc.idValueExpression=MVEL expression which should evaluate to the new identity value
TranslationAction.createPersistentAttribute.editor.title=Attribute values expression editor
TranslationAction.createPersistentAttribute.editor.evalTo=list of attribute values
TranslationAction.createPersistentAttribute.desc=Creates a new attribute (if doesn''t exist already), returns it to the client and also stores the attribute in the local database, so it becomes a regular Unity attribute.
TranslationAction.createPersistentAttribute.paramDesc.attributeName=Attribute name
TranslationAction.createPersistentAttribute.paramDesc.expression=MVEL expression, which must evaluate to the type compatible with the selected attribute. Both list and single value can be returned.
TranslationAction.createPersistentAttribute.paramDesc.group=Group where to add the attribute in the local database.
TranslationAction.createPersistentAttribute.paramDesc.mandatory=Indicates if user can remove the attribute from the released ones on the consent screen (relevant only if editing of released information is enabled for user).
TranslationAction.failAuthentication.desc=Fails authentication and returns an error to the relying party.
TranslationAction.failAuthentication.paramDesc.message=Error message to be returned
TranslationAction.stopAuthentication.desc=Stops authentication and shows finalization screen.
TranslationAction.stopAuthentication.paramDesc.title=Title
TranslationAction.stopAuthentication.paramDesc.info=Info
TranslationAction.stopAuthentication.paramDesc.redirectCaption=Redirect caption
TranslationAction.stopAuthentication.paramDesc.redirectURL=Redirect URL
TranslationAction.stopAuthentication.paramDesc.redirectAfter=Redirect after(s)
TranslationAction.stopAuthentication.paramDesc.invalidateSession=Invalidate session
AuthenticationProcessorImpl.authnFailed=Invalid user name, credential or external authentication failed.
AuthenticationProcessorImpl.secondFactorRequire=Two step authentication is required, however second step credential is unset.
AuthenticationProcessorImpl.authnWrongUsers=Two different users were authenticated
FormGenerator.updateAccount=Update your account
FormGenerator.createAccount=Create new account
FormGenerator.provideDetails=Provide your details
FormGenerator.yourGroups=Your groups:
FormGenerator.policyAgreementText=I agree to {0}
FormGenerator.invalidRegistrationForm=Invalid registration form
FormGenerator.noEmailIdentity=No email identity parameter. In this case email identity should be set by form profile.
FormGenerator.noAutoAccept=No auto accept action in profile. Invited users will need to be manually accepted.
FormGenerator.noAutoGroupAdd=No addToGroup action in profile. Processed users may not end up in the project.
FormGenerator.invalidEnquiryForm=Invalid enquiry form
FormGenerator.noInvitationTemplate=Request invitation notification message is not set
FormGenerator.noAcceptTemplate=Request accepted notification message is not set.
FormGenerator.noRejectTemplate=Request rejected notification message is not set
FormGenerator.noUpdateTemplate=Request updated notification message is not set
FormGenerator.targetGroupWithoutProject=Form's target groups do not contains project group.
FormGenerator.missingFormPolicies=Form''s policy agreements do not contain the following project policies: {0}
FormGenerator.additionalFormPolicies=Policy agreements contain policies not enabled for the project: {0}
FormGenerator.joinTitle=Join {0}
FormGenerator.updateTitle=Update {0} membership
FormGenerator.registrationNameSuffix=Registration
FormGenerator.joinEnquiryNameSuffix=JoinEnquiry
FormGenerator.updateEnquiryNameSuffix=UpdateEnquiry
EngineMessageAreaProvider.displayedName=Engine
UnknownMessageArea.displayedName=Unknown