io.netty.handler.traffic.TrafficCounter Maven / Gradle / Ivy
/*
* Copyright 2012 The Netty Project
*
* The Netty Project licenses this file to you under the Apache License,
* version 2.0 (the "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*/
package io.netty.handler.traffic;
import io.netty.util.internal.logging.InternalLogger;
import io.netty.util.internal.logging.InternalLoggerFactory;
import java.util.concurrent.ScheduledExecutorService;
import java.util.concurrent.ScheduledFuture;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.atomic.AtomicLong;
/**
* Counts the number of read and written bytes for rate-limiting traffic.
*
* It computes the statistics for both inbound and outbound traffic periodically at the given
* {@code checkInterval}, and calls the {@link AbstractTrafficShapingHandler#doAccounting(TrafficCounter)} method back.
* If the {@code checkInterval} is {@code 0}, no accounting will be done and statistics will only be computed at each
* receive or write operation.
*
*/
public class TrafficCounter {
private static final InternalLogger logger = InternalLoggerFactory.getInstance(TrafficCounter.class);
/**
* @return the time in ms using nanoTime, so not real EPOCH time but elapsed time in ms.
*/
public static long milliSecondFromNano() {
return System.nanoTime() / 1000000;
}
/**
* Current written bytes
*/
private final AtomicLong currentWrittenBytes = new AtomicLong();
/**
* Current read bytes
*/
private final AtomicLong currentReadBytes = new AtomicLong();
/**
* Last writing time during current check interval
*/
private long writingTime;
/**
* Last reading delay during current check interval
*/
private long readingTime;
/**
* Long life written bytes
*/
private final AtomicLong cumulativeWrittenBytes = new AtomicLong();
/**
* Long life read bytes
*/
private final AtomicLong cumulativeReadBytes = new AtomicLong();
/**
* Last Time where cumulative bytes where reset to zero: this time is a real EPOC time (informative only)
*/
private long lastCumulativeTime;
/**
* Last writing bandwidth
*/
private long lastWriteThroughput;
/**
* Last reading bandwidth
*/
private long lastReadThroughput;
/**
* Last Time Check taken
*/
final AtomicLong lastTime = new AtomicLong();
/**
* Last written bytes number during last check interval
*/
private volatile long lastWrittenBytes;
/**
* Last read bytes number during last check interval
*/
private volatile long lastReadBytes;
/**
* Last future writing time during last check interval
*/
private volatile long lastWritingTime;
/**
* Last reading time during last check interval
*/
private volatile long lastReadingTime;
/**
* Real written bytes
*/
private final AtomicLong realWrittenBytes = new AtomicLong();
/**
* Real writing bandwidth
*/
private long realWriteThroughput;
/**
* Delay between two captures
*/
final AtomicLong checkInterval = new AtomicLong(
AbstractTrafficShapingHandler.DEFAULT_CHECK_INTERVAL);
// default 1 s
/**
* Name of this Monitor
*/
final String name;
/**
* The associated TrafficShapingHandler
*/
final AbstractTrafficShapingHandler trafficShapingHandler;
/**
* Executor that will run the monitor
*/
final ScheduledExecutorService executor;
/**
* Monitor created once in start()
*/
Runnable monitor;
/**
* used in stop() to cancel the timer
*/
volatile ScheduledFuture scheduledFuture;
/**
* Is Monitor active
*/
volatile boolean monitorActive;
/**
* Class to implement monitoring at fix delay
*
*/
private final class TrafficMonitoringTask implements Runnable {
@Override
public void run() {
if (!monitorActive) {
return;
}
resetAccounting(milliSecondFromNano());
if (trafficShapingHandler != null) {
trafficShapingHandler.doAccounting(TrafficCounter.this);
}
}
}
/**
* Start the monitoring process.
*/
public synchronized void start() {
if (monitorActive) {
return;
}
lastTime.set(milliSecondFromNano());
long localCheckInterval = checkInterval.get();
// if executor is null, it means it is piloted by a GlobalChannelTrafficCounter, so no executor
if (localCheckInterval > 0 && executor != null) {
monitorActive = true;
monitor = new TrafficMonitoringTask();
scheduledFuture =
executor.scheduleAtFixedRate(monitor, 0, localCheckInterval, TimeUnit.MILLISECONDS);
}
}
/**
* Stop the monitoring process.
*/
public synchronized void stop() {
if (!monitorActive) {
return;
}
monitorActive = false;
resetAccounting(milliSecondFromNano());
if (trafficShapingHandler != null) {
trafficShapingHandler.doAccounting(this);
}
if (scheduledFuture != null) {
scheduledFuture.cancel(true);
}
}
/**
* Reset the accounting on Read and Write.
*
* @param newLastTime the milliseconds unix timestamp that we should be considered up-to-date for.
*/
synchronized void resetAccounting(long newLastTime) {
long interval = newLastTime - lastTime.getAndSet(newLastTime);
if (interval == 0) {
// nothing to do
return;
}
if (logger.isDebugEnabled() && interval > checkInterval() << 1) {
logger.debug("Acct schedule not ok: " + interval + " > 2*" + checkInterval() + " from " + name);
}
lastReadBytes = currentReadBytes.getAndSet(0);
lastWrittenBytes = currentWrittenBytes.getAndSet(0);
lastReadThroughput = lastReadBytes * 1000 / interval;
// nb byte / checkInterval in ms * 1000 (1s)
lastWriteThroughput = lastWrittenBytes * 1000 / interval;
// nb byte / checkInterval in ms * 1000 (1s)
realWriteThroughput = realWrittenBytes.getAndSet(0) * 1000 / interval;
lastWritingTime = Math.max(lastWritingTime, writingTime);
lastReadingTime = Math.max(lastReadingTime, readingTime);
}
/**
* Constructor with the {@link AbstractTrafficShapingHandler} that hosts it, the {@link ScheduledExecutorService}
* to use, its name, the checkInterval between two computations in milliseconds.
*
* @param executor
* the underlying executor service for scheduling checks, might be null when used
* from {@link GlobalChannelTrafficCounter}.
* @param name
* the name given to this monitor.
* @param checkInterval
* the checkInterval in millisecond between two computations.
*/
public TrafficCounter(ScheduledExecutorService executor, String name, long checkInterval) {
if (name == null) {
throw new NullPointerException("name");
}
trafficShapingHandler = null;
this.executor = executor;
this.name = name;
init(checkInterval);
}
/**
* Constructor with the {@link AbstractTrafficShapingHandler} that hosts it, the Timer to use, its
* name, the checkInterval between two computations in millisecond.
*
* @param trafficShapingHandler
* the associated AbstractTrafficShapingHandler.
* @param executor
* the underlying executor service for scheduling checks, might be null when used
* from {@link GlobalChannelTrafficCounter}.
* @param name
* the name given to this monitor.
* @param checkInterval
* the checkInterval in millisecond between two computations.
*/
public TrafficCounter(
AbstractTrafficShapingHandler trafficShapingHandler, ScheduledExecutorService executor,
String name, long checkInterval) {
if (trafficShapingHandler == null) {
throw new IllegalArgumentException("trafficShapingHandler");
}
if (name == null) {
throw new NullPointerException("name");
}
this.trafficShapingHandler = trafficShapingHandler;
this.executor = executor;
this.name = name;
init(checkInterval);
}
private void init(long checkInterval) {
// absolute time: informative only
lastCumulativeTime = System.currentTimeMillis();
writingTime = milliSecondFromNano();
readingTime = writingTime;
lastWritingTime = writingTime;
lastReadingTime = writingTime;
configure(checkInterval);
}
/**
* Change checkInterval between two computations in millisecond.
*
* @param newCheckInterval The new check interval (in milliseconds)
*/
public void configure(long newCheckInterval) {
long newInterval = newCheckInterval / 10 * 10;
if (checkInterval.getAndSet(newInterval) != newInterval) {
if (newInterval <= 0) {
stop();
// No more active monitoring
lastTime.set(milliSecondFromNano());
} else {
// Restart
stop();
start();
}
}
}
/**
* Computes counters for Read.
*
* @param recv
* the size in bytes to read
*/
void bytesRecvFlowControl(long recv) {
currentReadBytes.addAndGet(recv);
cumulativeReadBytes.addAndGet(recv);
}
/**
* Computes counters for Write.
*
* @param write
* the size in bytes to write
*/
void bytesWriteFlowControl(long write) {
currentWrittenBytes.addAndGet(write);
cumulativeWrittenBytes.addAndGet(write);
}
/**
* Computes counters for Real Write.
*
* @param write
* the size in bytes to write
*/
void bytesRealWriteFlowControl(long write) {
realWrittenBytes.addAndGet(write);
}
/**
* @return the current checkInterval between two computations of traffic counter
* in millisecond.
*/
public long checkInterval() {
return checkInterval.get();
}
/**
* @return the Read Throughput in bytes/s computes in the last check interval.
*/
public long lastReadThroughput() {
return lastReadThroughput;
}
/**
* @return the Write Throughput in bytes/s computes in the last check interval.
*/
public long lastWriteThroughput() {
return lastWriteThroughput;
}
/**
* @return the number of bytes read during the last check Interval.
*/
public long lastReadBytes() {
return lastReadBytes;
}
/**
* @return the number of bytes written during the last check Interval.
*/
public long lastWrittenBytes() {
return lastWrittenBytes;
}
/**
* @return the current number of bytes read since the last checkInterval.
*/
public long currentReadBytes() {
return currentReadBytes.get();
}
/**
* @return the current number of bytes written since the last check Interval.
*/
public long currentWrittenBytes() {
return currentWrittenBytes.get();
}
/**
* @return the Time in millisecond of the last check as of System.currentTimeMillis().
*/
public long lastTime() {
return lastTime.get();
}
/**
* @return the cumulativeWrittenBytes
*/
public long cumulativeWrittenBytes() {
return cumulativeWrittenBytes.get();
}
/**
* @return the cumulativeReadBytes
*/
public long cumulativeReadBytes() {
return cumulativeReadBytes.get();
}
/**
* @return the lastCumulativeTime in millisecond as of System.currentTimeMillis()
* when the cumulative counters were reset to 0.
*/
public long lastCumulativeTime() {
return lastCumulativeTime;
}
/**
* @return the realWrittenBytes
*/
public AtomicLong getRealWrittenBytes() {
return realWrittenBytes;
}
/**
* @return the realWriteThroughput
*/
public long getRealWriteThroughput() {
return realWriteThroughput;
}
/**
* Reset both read and written cumulative bytes counters and the associated absolute time
* from System.currentTimeMillis().
*/
public void resetCumulativeTime() {
lastCumulativeTime = System.currentTimeMillis();
cumulativeReadBytes.set(0);
cumulativeWrittenBytes.set(0);
}
/**
* @return the name of this TrafficCounter.
*/
public String name() {
return name;
}
/**
* Returns the time to wait (if any) for the given length message, using the given limitTraffic and the max wait
* time.
*
* @param size
* the recv size
* @param limitTraffic
* the traffic limit in bytes per second.
* @param maxTime
* the max time in ms to wait in case of excess of traffic.
* @return the current time to wait (in ms) if needed for Read operation.
*/
@Deprecated
public long readTimeToWait(final long size, final long limitTraffic, final long maxTime) {
return readTimeToWait(size, limitTraffic, maxTime, milliSecondFromNano());
}
/**
* Returns the time to wait (if any) for the given length message, using the given limitTraffic and the max wait
* time.
*
* @param size
* the recv size
* @param limitTraffic
* the traffic limit in bytes per second
* @param maxTime
* the max time in ms to wait in case of excess of traffic.
* @param now the current time
* @return the current time to wait (in ms) if needed for Read operation.
*/
public long readTimeToWait(final long size, final long limitTraffic, final long maxTime, final long now) {
bytesRecvFlowControl(size);
if (size == 0 || limitTraffic == 0) {
return 0;
}
final long lastTimeCheck = lastTime.get();
long sum = currentReadBytes.get();
long localReadingTime = readingTime;
long lastRB = lastReadBytes;
final long interval = now - lastTimeCheck;
long pastDelay = Math.max(lastReadingTime - lastTimeCheck, 0);
if (interval > AbstractTrafficShapingHandler.MINIMAL_WAIT) {
// Enough interval time to compute shaping
long time = sum * 1000 / limitTraffic - interval + pastDelay;
if (time > AbstractTrafficShapingHandler.MINIMAL_WAIT) {
if (logger.isDebugEnabled()) {
logger.debug("Time: " + time + ':' + sum + ':' + interval + ':' + pastDelay);
}
if (time > maxTime && now + time - localReadingTime > maxTime) {
time = maxTime;
}
readingTime = Math.max(localReadingTime, now + time);
return time;
}
readingTime = Math.max(localReadingTime, now);
return 0;
}
// take the last read interval check to get enough interval time
long lastsum = sum + lastRB;
long lastinterval = interval + checkInterval.get();
long time = lastsum * 1000 / limitTraffic - lastinterval + pastDelay;
if (time > AbstractTrafficShapingHandler.MINIMAL_WAIT) {
if (logger.isDebugEnabled()) {
logger.debug("Time: " + time + ':' + lastsum + ':' + lastinterval + ':' + pastDelay);
}
if (time > maxTime && now + time - localReadingTime > maxTime) {
time = maxTime;
}
readingTime = Math.max(localReadingTime, now + time);
return time;
}
readingTime = Math.max(localReadingTime, now);
return 0;
}
/**
* Returns the time to wait (if any) for the given length message, using the given limitTraffic and
* the max wait time.
*
* @param size
* the write size
* @param limitTraffic
* the traffic limit in bytes per second.
* @param maxTime
* the max time in ms to wait in case of excess of traffic.
* @return the current time to wait (in ms) if needed for Write operation.
*/
@Deprecated
public long writeTimeToWait(final long size, final long limitTraffic, final long maxTime) {
return writeTimeToWait(size, limitTraffic, maxTime, milliSecondFromNano());
}
/**
* Returns the time to wait (if any) for the given length message, using the given limitTraffic and
* the max wait time.
*
* @param size
* the write size
* @param limitTraffic
* the traffic limit in bytes per second.
* @param maxTime
* the max time in ms to wait in case of excess of traffic.
* @param now the current time
* @return the current time to wait (in ms) if needed for Write operation.
*/
public long writeTimeToWait(final long size, final long limitTraffic, final long maxTime, final long now) {
bytesWriteFlowControl(size);
if (size == 0 || limitTraffic == 0) {
return 0;
}
final long lastTimeCheck = lastTime.get();
long sum = currentWrittenBytes.get();
long lastWB = lastWrittenBytes;
long localWritingTime = writingTime;
long pastDelay = Math.max(lastWritingTime - lastTimeCheck, 0);
final long interval = now - lastTimeCheck;
if (interval > AbstractTrafficShapingHandler.MINIMAL_WAIT) {
// Enough interval time to compute shaping
long time = sum * 1000 / limitTraffic - interval + pastDelay;
if (time > AbstractTrafficShapingHandler.MINIMAL_WAIT) {
if (logger.isDebugEnabled()) {
logger.debug("Time: " + time + ':' + sum + ':' + interval + ':' + pastDelay);
}
if (time > maxTime && now + time - localWritingTime > maxTime) {
time = maxTime;
}
writingTime = Math.max(localWritingTime, now + time);
return time;
}
writingTime = Math.max(localWritingTime, now);
return 0;
}
// take the last write interval check to get enough interval time
long lastsum = sum + lastWB;
long lastinterval = interval + checkInterval.get();
long time = lastsum * 1000 / limitTraffic - lastinterval + pastDelay;
if (time > AbstractTrafficShapingHandler.MINIMAL_WAIT) {
if (logger.isDebugEnabled()) {
logger.debug("Time: " + time + ':' + lastsum + ':' + lastinterval + ':' + pastDelay);
}
if (time > maxTime && now + time - localWritingTime > maxTime) {
time = maxTime;
}
writingTime = Math.max(localWritingTime, now + time);
return time;
}
writingTime = Math.max(localWritingTime, now);
return 0;
}
@Override
public String toString() {
return new StringBuilder(165).append("Monitor ").append(name)
.append(" Current Speed Read: ").append(lastReadThroughput >> 10).append(" KB/s, ")
.append("Asked Write: ").append(lastWriteThroughput >> 10).append(" KB/s, ")
.append("Real Write: ").append(realWriteThroughput >> 10).append(" KB/s, ")
.append("Current Read: ").append(currentReadBytes.get() >> 10).append(" KB, ")
.append("Current asked Write: ").append(currentWrittenBytes.get() >> 10).append(" KB, ")
.append("Current real Write: ").append(realWrittenBytes.get() >> 10).append(" KB").toString();
}
}