javax.mail.internet.package.html Maven / Gradle / Ivy
Classes specific to Internet mail systems.
This package supports features that are specific to Internet mail systems
based on the MIME standard
(RFC 2045,
RFC 2046, and
RFC 2047).
The IMAP, SMTP, and POP3 protocols use
{@link javax.mail.internet.MimeMessage MimeMessages}.
The JavaMail API specification requires support for the following properties,
which must be set in the System properties.
The properties are always set as strings; the Type column describes
how the string is interpreted. For example, use (in J2SE 1.2 and newer)
System.setProperty("mail.mime.address.strict", "false");
to set the mail.mime.address.strict property,
which is of type boolean.
Name
Type
Description
mail.mime.address.strict
boolean
The mail.mime.address.strict session property controls
the parsing of address headers. By default, strict parsing of address
headers is done. If this property is set to "false",
strict parsing is not done and many illegal addresses that sometimes
occur in real messages are allowed. See the InternetAddress
class for details.
mail.mime.charset
String
The mail.mime.charset System property can
be used to specify the default MIME charset to use for encoded words
and text parts that don't otherwise specify a charset. Normally, the
default MIME charset is derived from the default Java charset, as
specified in the file.encoding System property. Most
applications will have no need to explicitly set the default MIME
charset. In cases where the default MIME charset to be used for
mail messages is different than the charset used for files stored on
the system, this property should be set.
mail.mime.decodetext.strict
boolean
The mail.mime.decodetext.strict property controls
decoding of MIME encoded words. The MIME spec requires that encoded
words start at the beginning of a whitespace separated word. Some
mailers incorrectly include encoded words in the middle of a word.
If the mail.mime.decodetext.strict System property is
set to "false", an attempt will be made to decode these
illegal encoded words. The default is true.
mail.mime.encodeeol.strict
boolean
The mail.mime.encodeeol.strict property controls the
choice of Content-Transfer-Encoding for MIME parts that are not of
type "text". Often such parts will contain textual data for which
an encoding that allows normal end of line conventions is appropriate.
In rare cases, such a part will appear to contain entirely textual
data, but will require an encoding that preserves CR and LF characters
without change. If the mail.mime.encodeeol.strict
System property is set to "true", such an encoding will
be used when necessary. The default is false.
mail.mime.decodefilename
boolean
If set to "true", the getFileName method
uses the MimeUtility
method decodeText to decode any
non-ASCII characters in the filename. Note that this decoding
violates the MIME specification, but is useful for interoperating
with some mail clients that use this convention.
The default is false.
mail.mime.encodefilename
boolean
If set to "true", the setFileName method
uses the MimeUtility
method encodeText to encode any
non-ASCII characters in the filename. Note that this encoding
violates the MIME specification, but is useful for interoperating
with some mail clients that use this convention.
The default is false.
mail.mime.decodeparameters
boolean
If set to "true", non-ASCII parameters in a
ParameterList, e.g., in a Content-Type header,
will be decoded as specified by
RFC 2231.
The default is false.
mail.mime.encodeparameters
boolean
If set to "true", non-ASCII parameters in a
ParameterList, e.g., in a Content-Type header,
will be encoded as specified by
RFC 2231.
The default is false.
mail.mime.multipart. ignoremissingendboundary
boolean
Normally, when parsing a multipart MIME message, a message that is
missing the final end boundary line is not considered an error.
The data simply ends at the end of the input. Note that messages
of this form violate the MIME specification. If the property
mail.mime.multipart.ignoremissingendboundary is set
to false, such messages are considered an error and a
MesagingException will be thrown when parsing such a
message.
mail.mime.multipart. ignoremissingboundaryparameter
boolean
If the Content-Type header for a multipart content does not have
a boundary parameter, the multipart parsing code
will look for the first line in the content that looks like a
boundary line and extract the boundary parameter from the line.
If this property is set to "false", a
MessagingException will be thrown if the Content-Type
header doesn't specify a boundary parameter.
The default is true.
The following properties are supported by Sun's implementation of
JavaMail, but are not currently a required part of the specification.
As above, these must be set as System properties.
The names, types, defaults, and semantics of these properties may
change in future releases.
Name
Type
Description
mail.mime.base64.ignoreerrors
boolean
If set to "true", the BASE64 decoder will ignore errors
in the encoded data, returning EOF. This may be useful when dealing
with improperly encoded messages that contain extraneous data at the
end of the encoded stream. Note however that errors anywhere in the
stream will cause the decoder to stop decoding so this should be used
with extreme caution. The default is false.
mail.mime.foldtext
boolean
If set to "true", header fields containing just text
such as the Subject and Content-Description
header fields, and long parameter values in structured headers such
as Content-Type will be folded (broken into 76 character lines)
when set and unfolded when read. The default is true.
mail.mime.setcontenttypefilename
boolean
If set to "true", the setFileName method
will also set the name parameter on the Content-Type
header to the specified filename. This supports interoperability with
some old mail clients. The default is true.
mail.mime.setdefaulttextcharset
boolean
When updating the headers of a message, a body
part with a text content type but no charset
parameter will have a charset parameter added to it
if this property is set to "true".
The default is true.
mail.mime.parameters.strict
boolean
If set to false, when reading a message, parameter values in header fields
such as Content-Type and Content-Disposition
are allowed to contain whitespace and other special characters without
being quoted; the parameter value ends at the next semicolon.
If set to true (the default), parameter values are required to conform
to the MIME specification and must be quoted if they contain whitespace
or special characters.
mail.mime.applefilenames
boolean
Apple Mail incorrectly encodes filenames that contain spaces,
forgetting to quote the parameter value. If this property is
set to "true", JavaMail will try to detect this
situation when parsing parameters and work around it.
The default is false.
Note that this property handles a subset of the cases handled
by setting the mail.mime.parameters.strict property to false.
This property will likely be removed in a future release.
mail.mime.windowsfilenames
boolean
Internet Explorer 6 incorrectly includes a complete pathname
in the filename parameter of the Content-Disposition header
for uploaded files, and fails to properly escape the backslashes
in the pathname. If this property is
set to "true", JavaMail will preserve all backslashes
in the "filename" and "name" parameters of any MIME header.
The default is false.
Note that this is a violation of the MIME specification but may
be useful when using JavaMail to parse HTTP messages for uploaded
files sent by IE6.
mail.mime. ignoreunknownencoding
boolean
If set to "true", an unknown value in the
Content-Transfer-Encoding header will be ignored
when reading a message and an encoding of "8bit" will be assumed.
If set to "false", an exception is thrown for an
unknown encoding value. The default is false.
mail.mime.uudecode. ignoreerrors
boolean
If set to "true", errors in the encoded format of a
uuencoded document will be ignored when reading a message part.
If set to "false", an exception is thrown for an
incorrectly encoded message part. The default is false.
mail.mime.uudecode. ignoremissingbeginend
boolean
If set to "true", a missing "being" or "end" line in a
uuencoded document will be ignored when reading a message part.
If set to "false", an exception is thrown for a
uuencoded message part without the required "begin" and "end" lines.
The default is false.
mail.mime.multipart. allowempty
boolean
Normally, when writing out a MimeMultipart that contains no body
parts, or when trying to parse a multipart message with no body parts,
a MessagingException is thrown. The MIME spec does not allow
multipart content with no body parts. This
System property may be set to "true" to override this behavior.
When writing out such a MimeMultipart, a single empty part will be
included. When reading such a multipart, a MimeMultipart will be created
with no body parts.
The default value of this property is false.
mail.mime.multipart. ignoreexistingboundaryparameter
boolean
Normally the boundary parameter in the Content-Type header of a multipart
body part is used to specify the separator between parts of the multipart
body. This System property may be set to "true" to cause
the parser to look for a line in the multipart body that looks like a
boundary line and use that value as the separator between subsequent parts.
This may be useful in cases where a broken anti-virus product has rewritten
the message incorrectly such that the boundary parameter and the actual
boundary value no longer match.
The default value of this property is false.
mail.mime.multipart. ignorewhitespacelines
boolean
Normally the header of a MIME part is separated from the body by an empty
line. This System property may be set to "true" to cause
the parser to consider a line containing only whitespace to be an empty
line. The default value of this property is false.
mail.mime. ignoremultipartencoding
boolean
The MIME spec does not allow body parts of type multipart/* to be encoded.
The Content-Transfer-Encoding header is ignored in this case.
Setting this System property to "false" will
cause the Content-Transfer-Encoding header to be honored for multipart
content.
The default value of this property is true.
mail.mime.allowencodedmessages
boolean
The MIME spec does not allow body parts of type message/* to be encoded.
The Content-Transfer-Encoding header is ignored in this case.
Some versions of Microsoft Outlook will incorrectly encode message
attachments. Setting this System property to "true" will
cause the Content-Transfer-Encoding header to be honored for message
attachments.
The default value of this property is false.
mail.mime.contenttypehandler
String
In some cases JavaMail is unable to process messages with an invalid
Content-Type header. The header may have incorrect syntax or other
problems. This property specifies the name of a class that will be
used to clean up the Content-Type header value before JavaMail uses it.
The class must have a method with this signature:
public static String cleanContentType(MimePart mp, String contentType)
Whenever JavaMail accesses the Content-Type header of a message, it
will pass the value to this method and use the returned value instead.
The value may be null if the Content-Type header isn't present.
Returning null will cause the default Content-Type to be used.
The MimePart may be used to access other headers of the message part
to determine how to correct the Content-Type.
Note that the Content-Type handler doesn't affect the
getHeader method, which still returns the raw header value.
Note also that the handler doesn't affect the IMAP provider; the IMAP
server is responsible for returning pre-parsed, syntactically correct
Content-Type information.
mail.alternates
String
A string containing other email addresses that the current user is known by.
The MimeMessage reply method will eliminate any
of these addresses from the recipient list in the message it constructs,
to avoid sending the reply back to the sender.
mail.replyallcc
boolean
If set to "true", the MimeMessage
reply method will put all recipients except the original
sender in the Cc list of the newly constructed message.
Normally, recipients in the To header of the original
message will also appear in the To list of the newly
constructed message.
The current
implementation of classes in this package log debugging information using
{@link java.util.logging.Logger} as described in the following table:
Logger Name
Logging Level
Purpose
javax.mail.internet
FINE
General debugging output