javax.xml.ws.soap.AddressingFeature Maven / Gradle / Ivy
/*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
*
* Copyright (c) 2005-2017 Oracle and/or its affiliates. All rights reserved.
*
* The contents of this file are subject to the terms of either the GNU
* General Public License Version 2 only ("GPL") or the Common Development
* and Distribution License("CDDL") (collectively, the "License"). You
* may not use this file except in compliance with the License. You can
* obtain a copy of the License at
* https://oss.oracle.com/licenses/CDDL+GPL-1.1
* or LICENSE.txt. See the License for the specific
* language governing permissions and limitations under the License.
*
* When distributing the software, include this License Header Notice in each
* file and include the License file at LICENSE.txt.
*
* GPL Classpath Exception:
* Oracle designates this particular file as subject to the "Classpath"
* exception as provided by Oracle in the GPL Version 2 section of the License
* file that accompanied this code.
*
* Modifications:
* If applicable, add the following below the License Header, with the fields
* enclosed by brackets [] replaced by your own identifying information:
* "Portions Copyright [year] [name of copyright owner]"
*
* Contributor(s):
* If you wish your version of this file to be governed by only the CDDL or
* only the GPL Version 2, indicate your decision by adding "[Contributor]
* elects to include this software in this distribution under the [CDDL or GPL
* Version 2] license." If you don't indicate a single choice of license, a
* recipient has the option to distribute your version of this file under
* either the CDDL, the GPL Version 2 or to extend the choice of license to
* its licensees as provided above. However, if you add GPL Version 2 code
* and therefore, elected the GPL Version 2 license, then the option applies
* only if the new code is made subject to such option by the copyright
* holder.
*/
package javax.xml.ws.soap;
import javax.xml.ws.WebServiceFeature;
import javax.xml.ws.Endpoint;
import javax.xml.ws.Service;
/**
* AddressingFeature represents the use of WS-Addressing with either
* the SOAP 1.1/HTTP or SOAP 1.2/HTTP binding. Using this feature
* with any other binding is undefined.
*
* This feature can be used during the creation of SEI proxy, and
* {@link javax.xml.ws.Dispatch} instances on the client side and {@link Endpoint}
* instances on the server side. This feature cannot be used for {@link Service}
* instance creation on the client side.
*
* The following describes the effects of this feature with respect
* to be enabled or disabled:
*
* - ENABLED: In this Mode, WS-Addressing will be enabled. It means
* the endpoint supports WS-Addressing but does not require its use.
* A sender could send messages with WS-Addressing headers or without
* WS-Addressing headers. But a receiver MUST consume both types of
* messages.
*
- DISABLED: In this Mode, WS-Addressing will be disabled.
* At runtime, WS-Addressing headers MUST NOT be used by a sender or
* receiver.
*
*
* If the feature is enabled, the {@code required} property determines
* whether the endpoint requires WS-Addressing. If it is set true,
* WS-Addressing headers MUST be present on incoming and outgoing messages.
* By default the {@code required} property is {@code false}.
*
*
* If the web service developer has not explicitly enabled this feature,
* WSDL's wsam:Addressing policy assertion is used to find
* the use of WS-Addressing. By using the feature explicitly, an application
* overrides WSDL's indication of the use of WS-Addressing. In some cases,
* this is really required. For example, if an application has implemented
* WS-Addressing itself, it can use this feature to disable addressing. That
* means a JAX-WS implementation doesn't consume or produce WS-Addressing
* headers.
*
*
* If addressing is enabled, a corresponding wsam:Addressing policy assertion
* must be generated in the WSDL as per
*
* 3.1 WS-Policy Assertions
*
*
* Example 1: Possible Policy Assertion in the generated WSDL for
* {@code @Addressing}
*
{@code
*
* }
*
*
*
* Example 2: Possible Policy Assertion in the generated WSDL for
* {@code @Addressing(required=true)}
*
{@code
*
* }
*
*
*
* Example 3: Possible Policy Assertion in the generated WSDL for
* {@code @Addressing(required=true, responses=Responses.ANONYMOUS)}
*
{@code
*
*
*
* }
*
*
*
* See
* Web Services Addressing - Core,
*
* Web Services Addressing 1.0 - SOAP Binding,
* and
* Web Services Addressing 1.0 - Metadata
* for more information on WS-Addressing.
*
* @see Addressing
* @since 1.6, JAX-WS 2.1
*/
public final class AddressingFeature extends WebServiceFeature {
/**
* Constant value identifying the AddressingFeature
*/
public static final String ID = "http://www.w3.org/2005/08/addressing/module";
/**
* If addressing is enabled, this property determines whether the endpoint
* requires WS-Addressing. If required is true, WS-Addressing headers MUST
* be present on incoming and outgoing messages.
*/
// should be private final, keeping original modifier due to backwards compatibility
protected boolean required;
/**
* If addressing is enabled, this property determines if endpoint requires
* the use of only anonymous responses, or only non-anonymous responses, or all.
*
*
* {@link Responses#ALL} supports all response types and this is the default
* value.
*
*
* {@link Responses#ANONYMOUS} requires the use of only anonymous
* responses. It will result into wsam:AnonymousResponses nested assertion
* as specified in
*
* 3.1.2 AnonymousResponses Assertion in the generated WSDL.
*
*
* {@link Responses#NON_ANONYMOUS} requires the use of only non-anonymous
* responses. It will result into
* wsam:NonAnonymousResponses nested assertion as specified in
*
* 3.1.3 NonAnonymousResponses Assertion in the generated WSDL.
*
* @since 1.7, JAX-WS 2.2
*/
public enum Responses {
/**
* Specifies the use of only anonymous
* responses. It will result into wsam:AnonymousResponses nested assertion
* as specified in
*
* 3.1.2 AnonymousResponses Assertion in the generated WSDL.
*/
ANONYMOUS,
/**
* Specifies the use of only non-anonymous
* responses. It will result into
* wsam:NonAnonymousResponses nested assertion as specified in
*
* 3.1.3 NonAnonymousResponses Assertion in the generated WSDL.
*/
NON_ANONYMOUS,
/**
* Supports all response types and this is the default
*/
ALL
}
private final Responses responses;
/**
* Creates and configures an {@code AddressingFeature} with the
* use of addressing requirements. The created feature enables
* ws-addressing i.e. supports ws-addressing but doesn't require
* its use. It is also configured to accept all the response types.
*/
public AddressingFeature() {
this(true, false, Responses.ALL);
}
/**
* Creates and configures an {@code AddressingFeature} with the
* use of addressing requirements. If {@code enabled} is true,
* it enables ws-addressing i.e. supports ws-addressing but doesn't
* require its use. It also configures to accept all the response types.
*
* @param enabled true enables ws-addressing i.e.ws-addressing
* is supported but doesn't require its use
*/
public AddressingFeature(boolean enabled) {
this(enabled, false, Responses.ALL);
}
/**
* Creates and configures an {@code AddressingFeature} with the
* use of addressing requirements. If {@code enabled} and
* {@code required} are true, it enables ws-addressing and
* requires its use. It also configures to accept all the response types.
*
* @param enabled true enables ws-addressing i.e.ws-addressing
* is supported but doesn't require its use
* @param required true means requires the use of ws-addressing .
*/
public AddressingFeature(boolean enabled, boolean required) {
this(enabled, required, Responses.ALL);
}
/**
* Creates and configures an {@code AddressingFeature} with the
* use of addressing requirements. If {@code enabled} and
* {@code required} are true, it enables ws-addressing and
* requires its use. Also, the response types can be configured using
* {@code responses} parameter.
*
* @param enabled true enables ws-addressing i.e.ws-addressing
* is supported but doesn't require its use
* @param required true means requires the use of ws-addressing .
* @param responses specifies what type of responses are required
*
* @since 1.7, JAX-WS 2.2
*/
public AddressingFeature(boolean enabled, boolean required, Responses responses) {
this.enabled = enabled;
this.required = required;
this.responses = responses;
}
/**
* {@inheritDoc}
*/
public String getID() {
return ID;
}
/**
* If addressing is enabled, this property determines whether the endpoint
* requires WS-Addressing. If required is true, WS-Addressing headers MUST
* be present on incoming and outgoing messages.
*
* @return the current required value
*/
public boolean isRequired() {
return required;
}
/**
* If addressing is enabled, this property determines whether endpoint
* requires the use of anonymous responses, or non-anonymous responses,
* or all responses.
*
* @return {@link Responses#ALL} when endpoint supports all types of
* responses,
* {@link Responses#ANONYMOUS} when endpoint requires the use of
* only anonymous responses,
* {@link Responses#NON_ANONYMOUS} when endpoint requires the use
* of only non-anonymous responses
*
* @since 1.7, JAX-WS 2.2
*/
public Responses getResponses() {
return responses;
}
}