• Home
• net.java.dev.javacc
• javacc
• 6.1.2
• source code
• OPTIMIZING

×

Project download

Many resources are needed to download a project. Please understand that we have to compensate our server costs. Thank you in advance.
Project price only 1 $

You can buy this project and download/modify it how often you want.

javacc-6.1.2.examples.JavaGrammars.OPTIMIZING Maven / Gradle / Ivy

/* Copyright (c) 2006, Sun Microsystems, Inc.
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 * 
 *     * Redistributions of source code must retain the above copyright notice,
 *       this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of the Sun Microsystems, Inc. nor the names of its
 *       contributors may be used to endorse or promote products derived from
 *       this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 */

This file describes in a step by step manner how you can modify the
lookaheads in your grammar to optimize for space in the generated
parser.  This is only necessary until JavaCC is improved to do this
optimization automatically (at which time, we will delete this file).

1. How much space optimization can one expect?

The optimizations that we show here gets rid of all methods in the
generated parser which start with "jj_2" and "jj_3" respectively.  So
take a look at your generated parser and figure out how much space is
occupied by these methods.  When we performed this optimization on the
Java grammar, we were able to decrease the size of the generated
parser by more than 50%.

2. Why are "jj_2" and "jj_3" methods generated?

These methods are generated to handle all lookaheads except the
following:

a. A syntactic lookahead of 1 (the most common situation).
b. For any amount of syntactic lookahead - when the target expansion can
   match the empty string.
c. When the syntactic lookahead is 0.  Typically there is only semantic
   lookahead this situation.

The "jj_2" and "jj_3" methods are also generated for lookaheads in the
(a) and (b) categories above when hoisting of semantic predicates is
required.

3. Summary of how we achieve the optimization:

Essentially, we go through the entire grammar looking for choice
points that are not one of (a), (b), or (c) above.  We then replace
the lookaheads at these points with one of kind (c) above.

When we do this, JavaCC generates a parser where all the new semantic
lookaheads causes hoisting which affect other related choice points
and cause the "jj_2" and "jj_3" methods to be generated there.

So the final step is to locate these related choice points and insert
explicit lookahead specifications here to prevent hoisting from taking
place.

4. When is a grammar amenable to such optimization?

If the majority of the choice points in your grammar use lookaheads
that fall into the categories (a), (b), or (c) above then go for it.
Otherwise, you'll be spending too much work and essentially rewriting
the entire parser.  It took a few hours to optimize the Java grammar.
But I would not recommend doing it for C++ (for C++, just wait for
JavaCC to be upgraded to do it automatically).

5. Step by step instructions:

Suppose your grammar file is called Grammar.jj.  You are going to go
through two steps - in the first step, you create Grammar1.jj, and
in the second step you create the final grammar file - Grammar2.jj.
Lets also assume that the parsers generated from these grammar files
are Grammar.java, Grammar1.java, and Grammar2.java respectively.

STEP 1:

For every lookahead in your grammar that does not fit into categories
(a), (b), or (c) above, replace it with an equivalent semantic
lookahead.  When you're done with all such replacements, the resulting
file is Grammar1.jj.

Example:

In the Java1.1.jj grammar, we have the following production for Name:

void Name() :
{}
{
  
  ( LOOKAHEAD(2)
    "." 
  )*
}

It uses a lookahead of 2 - obviously this means that the choice
selection succeeds only if the next two characters are a "." and
an .  The following modification replaces the syntactic
lookahead with a semantic lookahead:

void Name() :
{}
{
  
  ( LOOKAHEAD( { getToken(1).kind == DOT && getToken(2).kind == IDENTIFIER } )
    "." 
  )*
}

STEP 2:

Run JavaCC on both Grammar.jj and Grammar1.jj to obtain Grammar.java
and Grammar1.java.  Remember, the goal is to get rid of "jj_2" and
"jj_3" methods from the grammar.  Changes are you will see a bunch of
"jj_2" and "jj_3" methods in Grammar1.java.  We need to focus only
on the "jj_2" methods.  When these methods are removed, the "jj_3"
methods automatically go away too.  In the Java grammar, we found 23
"jj_2" methods to get rid of in this step.

Search for calls to "jj_2" methods in Grammar1.java.  Locate the
corresponding portions in Grammar1.jj (the choice points in the grammar
corresponding to these calls).  These calls are there to perform
hoisting (which you don't want - you don't need to understand hoisting
to perform this step).

Now look for corresponding locations in Grammar.java.  You will see
references to a token mask array instead of a "jj_2" call at these
locations.  Take a look at the value of the token mask array.  Use
these values to create a new lookahead for this choice point to get
rid of the "jj_2" call.

The resulting grammar (Grammar2.jj) is the grammar you want.

Obviously, we need an example:

The Java parser generated after performing step 1 has the following
method with a call to a "jj_2" method ("jj_2_3"):

  static final public void UnmodifiedInterfaceDeclaration() throws ParseException {
    jj_consume_token(INTERFACE);
    jj_consume_token(IDENTIFIER);
    if (jj_mask_29[getToken(1).kind]) {
      jj_consume_token(EXTENDS);
      NameList();
    } else {
      jj_expLA1[29] = jj_gen;
      ;
    }
    jj_consume_token(LBRACE);
    label_8:
    while (true) {
      if (jj_2_3(1)) {
        ;
      } else {
        break label_8;
      }
      InterfaceMemberDeclaration();
    }
    jj_consume_token(RBRACE);
  }

The corresponding location in the Java grammar is:

void UnmodifiedInterfaceDeclaration() :
{}
{
  "interface"  [ "extends" NameList() ]
  "{"
    ( // <-- the choice point
      InterfaceMemberDeclaration()
    )*
  "}"
}

The choice point corresponding to the call to "jj_2_3" above is
marked by the arrow.

Now lets take a look at the parser generated from the original Java
grammar.  The above method is shown below:

  static final public void UnmodifiedInterfaceDeclaration() throws ParseException {
    jj_consume_token(INTERFACE);
    jj_consume_token(IDENTIFIER);
    if (jj_mask_40[getToken(1).kind]) {
      jj_consume_token(EXTENDS);
      NameList();
    } else {
      jj_expLA1[40] = jj_gen;
      ;
    }
    jj_consume_token(LBRACE);
    label_9:
    while (true) {
      if (jj_mask_41[getToken(1).kind]) {
        ;
      } else {
        jj_expLA1[41] = jj_gen;
        break label_9;
      }
      InterfaceMemberDeclaration();
    }
    jj_consume_token(RBRACE);
  }

Instead of the call to "jj_2_3", there is a reference to the token
mask array "jj_mask_41".  Now take a look at the initialization of
"jj_mask_41" that occurs a few lines further on:

  static boolean[] jj_mask_41 = new boolean[120];
  static {
    jj_mask_41[ABSTRACT] =
    jj_mask_41[BOOLEAN] =
    jj_mask_41[BYTE] =
    jj_mask_41[CHAR] =
    jj_mask_41[CLASS] =
    jj_mask_41[DOUBLE] =
    jj_mask_41[FINAL] =
    jj_mask_41[FLOAT] =
    jj_mask_41[INT] =
    jj_mask_41[INTERFACE] =
    jj_mask_41[LONG] =
    jj_mask_41[NATIVE] =
    jj_mask_41[PRIVATE] =
    jj_mask_41[PROTECTED] =
    jj_mask_41[PUBLIC] =
    jj_mask_41[SHORT] =
    jj_mask_41[STATIC] =
    jj_mask_41[SYNCHRONIZED] =
    jj_mask_41[TRANSIENT] =
    jj_mask_41[VOID] =
    jj_mask_41[VOLATILE] =
    jj_mask_41[IDENTIFIER] = true;
  }

This defines the tokens that must be matched at the choice point
in order for that choice point to succeed.  Use this to explicitly
insert a lookahead specification into the grammar to prevent the
hoisting of semantic predicates.  Hence the resulting production
in the final grammar is:

void UnmodifiedInterfaceDeclaration() :
{}
{
  "interface"  [ "extends" NameList() ]
  "{"
    (
      LOOKAHEAD(1,  |  |  |  |  |  |
                    |  |  |  |  |  |
                    |  |  |  |  |
                    |  |  |  | )
      InterfaceMemberDeclaration()
    )*
  "}"
}