Many resources are needed to download a project. Please understand that we have to compensate our server costs. Thank you in advance. Project price only 1 $
You can buy this project and download/modify it how often you want.
/*
* Copyright (c) 2001-2007 Sun Microsystems, Inc. All rights reserved.
*
* The Sun Project JXTA(TM) Software License
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The end-user documentation included with the redistribution, if any, must
* include the following acknowledgment: "This product includes software
* developed by Sun Microsystems, Inc. for JXTA(TM) technology."
* Alternately, this acknowledgment may appear in the software itself, if
* and wherever such third-party acknowledgments normally appear.
*
* 4. The names "Sun", "Sun Microsystems, Inc.", "JXTA" and "Project JXTA" must
* not be used to endorse or promote products derived from this software
* without prior written permission. For written permission, please contact
* Project JXTA at http://www.jxta.org.
*
* 5. Products derived from this software may not be called "JXTA", nor may
* "JXTA" appear in their name, without prior written permission of Sun.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SUN
* MICROSYSTEMS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* JXTA is a registered trademark of Sun Microsystems, Inc. in the United
* States and other countries.
*
* Please see the license information page at :
* for instructions on use of
* the license in source files.
*
* ====================================================================
*
* This software consists of voluntary contributions made by many individuals
* on behalf of Project JXTA. For more information on Project JXTA, please see
* http://www.jxta.org.
*
* This license is based on the BSD license adopted by the Apache Foundation.
*/
package net.jxta.impl.endpoint.router;
import net.jxta.document.Advertisement;
import net.jxta.document.AdvertisementFactory;
import net.jxta.document.XMLElement;
import net.jxta.endpoint.EndpointAddress;
import net.jxta.endpoint.EndpointListener;
import net.jxta.endpoint.EndpointService;
import net.jxta.endpoint.Message;
import net.jxta.endpoint.MessageReceiver;
import net.jxta.endpoint.MessageSender;
import net.jxta.endpoint.MessageTransport;
import net.jxta.endpoint.Messenger;
import net.jxta.endpoint.MessengerEvent;
import net.jxta.endpoint.MessengerEventListener;
import net.jxta.exception.PeerGroupException;
import net.jxta.id.ID;
import net.jxta.id.IDFactory;
import net.jxta.impl.endpoint.LoopbackMessenger;
import net.jxta.impl.util.TimeUtils;
import net.jxta.impl.util.TimerThreadNamer;
import net.jxta.logging.Logging;
import net.jxta.peer.PeerID;
import net.jxta.peergroup.PeerGroup;
import net.jxta.platform.Module;
import net.jxta.protocol.AccessPointAdvertisement;
import net.jxta.protocol.ModuleImplAdvertisement;
import net.jxta.protocol.PeerAdvertisement;
import net.jxta.protocol.RouteAdvertisement;
import net.jxta.service.Service;
import java.io.IOException;
import java.net.URI;
import java.net.URISyntaxException;
import java.util.ArrayList;
import java.util.Collection;
import java.util.Collections;
import java.util.Enumeration;
import java.util.HashMap;
import java.util.HashSet;
import java.util.Iterator;
import java.util.List;
import java.util.Map;
import java.util.Set;
import java.util.Timer;
import java.util.TimerTask;
import java.util.Vector;
import java.util.logging.Level;
import java.util.logging.Logger;
public class EndpointRouter implements EndpointListener, MessageReceiver, MessageSender, MessengerEventListener, Module {
/**
* Logger
*/
private final static transient Logger LOG = Logger.getLogger(EndpointRouter.class.getName());
/**
* Until we decide otherwise, the router is *by definition* handling
* virtually addressed messages.
*/
private final static String ROUTER_PROTOCOL_NAME = "jxta";
/**
* Router Service Name
*/
private final static String ROUTER_SERVICE_NAME = "EndpointRouter";
/**
* how long we are willing to wait for a response from an async
* getMessenger. We do not wait long at all because it is non-critical
* that we get the answer synchronously. The goal is to avoid starting
* a route discovery if there's a chance to get a direct connection.
* However, we will still take advantage of the direct route if it is
* found while we wait for the route discovery result. If that happens,
* the only wrong is that we used some bandwidth doing a route discovery
* that wasn't needed after all.
*/
public final static long ASYNC_MESSENGER_WAIT = 3L * TimeUtils.ASECOND;
/**
* MessageTransport Control operation
*/
public final static Integer GET_ROUTE_CONTROL = 0; // Return RouteControl Object
public final static int RouteControlOp = 0; // Return RouteControl Object
/**
* MAX timeout (seconds) for route discovery after that timeout
* the peer will bail out from finding a route
*/
private final static long MAX_FINDROUTE_TIMEOUT = 60L * TimeUtils.ASECOND;
/**
* How long do we wait (seconds) before retrying to make a connection
* to an endpoint destination
*/
private final static long MAX_ASYNC_GETMESSENGER_RETRY = 30L * TimeUtils.ASECOND;
/**
* These are peers which we know multi-hop routes for.
*/
private final Map routedRoutes = new HashMap(16);
/**
* A record of failures.
*
* Values are the time of failure as {@link java.lang.Long}. If
* {@code Long.MAX_VALUE} then a connect attempt is current in progress.
*/
private final Map triedAndFailed = new HashMap();
/**
* local peer ID as an endpointAddress.
*/
private EndpointAddress localPeerAddr = null;
/**
* local Peer ID
*/
private PeerID localPeerId = null;
/**
* The Endpoint Service we are routing for.
*/
private EndpointService endpoint = null;
/**
* PeerGroup handle
*/
private PeerGroup group = null;
private ID assignedID = null;
/**
* If {@code true} this service has been closed.
*/
private boolean stopped = false;
/**
* Whenever we initiate connectivity to a peer (creating a direct route).
* we remember that we need to send our route adv to that peer. So that
* it has a chance to re-establish the connection from its side, if need
* be. The route adv is actually sent piggy-backed on the first message
* that goes there.
*/
private final Set newDestinations = Collections.synchronizedSet(new HashSet());
/**
* A pool of messengers categorized by logical address.
* This actually is the direct routes map.
*/
private Destinations destinations;
/**
* A record of expiration time of known bad routes we received a NACK route
*/
private final Map badRoutes = new HashMap();
/**
* We record queries when first started and keep them pending for
* a while. Threads coming in the meanwhile wait for a result without
* initiating a query. Thus threads may wait passed the point where
* the query is no-longer pending, and, although they could initiate
* a new one, they do not.
*
* However, other threads coming later may initiate a new query. So a
* query is not re-initiated systematically on a fixed schedule. This
* mechanism also serves to avoid infinite recursions if we're looking
* for the route to a rendezvous (route queries will try to go there
* themselves).
*
* FIXME: [email protected] 20020903 this is approximate. We can do
* cleaner/better than this, but it's already an inexpensive improvement
* over what used before.
*
* FIXME: [email protected] 20030818 the pending hashmap should be moved
* in the routeResolver class.
*/
private final Map pendingQueries =
Collections.synchronizedMap(new HashMap());
/**
* Timer by which we schedule the clearing of pending queries.
*/
private final Timer timer = new Timer("EndpointRouter Timer", true);
/**
* PeerAdv tracking.
* The peer adv is modified every time a new public address is
* enabled/disabled. One of such cases is the connection/disconnection
* from a relay. Since these changes are to the embedded route adv
* and since we may embed our route adv in messages, we must keep it
* up-to-date.
*/
private PeerAdvertisement lastPeerAdv = null;
private int lastModCount = -1;
/**
* Route info for the local peer (updated along with lastPeerAdv).
*/
private RouteAdvertisement localRoute = null;
/**
* Route CM persistent cache
*/
private RouteCM routeCM = null;
/**
* Route Resolver
*/
private RouteResolver routeResolver;
class ClearPendingQuery extends TimerTask {
final PeerID peerID;
volatile boolean failed = false;
long nextRouteResolveAt = 0;
ClearPendingQuery(PeerID peerID) {
this.peerID = peerID;
// We schedule for one tick at one minute and another at 5 minutes
// after the second, we cancel ourselves.
timer.schedule(this, TimeUtils.AMINUTE, 5L * TimeUtils.AMINUTE);
nextRouteResolveAt = TimeUtils.toAbsoluteTimeMillis(20L * TimeUtils.ASECOND);
}
/**
* {@inheritDoc}
*/
@Override
public void run() {
try {
if (failed) {
// Second tick.
// This negative cache info is expired.
pendingQueries.remove(peerID);
this.cancel();
} else {
// First timer tick. We're done trying. This is now a negative
// cache info. For the next 5 minutes that destination fails
// immediately unless it unexpectedly gets finaly resolved.
failed = true;
}
} catch (Throwable all) {
if (Logging.SHOW_SEVERE && LOG.isLoggable(Level.SEVERE)) {
LOG.log(Level.SEVERE, "Uncaught Throwable in timer task " + Thread.currentThread().getName() + " for " + peerID, all);
}
}
}
public synchronized boolean isTimeToResolveRoute() {
if (TimeUtils.toRelativeTimeMillis(nextRouteResolveAt) > 0) {
return false;
}
// nextRouteResolveAt is passed. Set the next time to retry from now.
nextRouteResolveAt = TimeUtils.toAbsoluteTimeMillis(20L * TimeUtils.ASECOND);
return true;
}
public boolean isFailed() {
return failed;
}
}
RouteAdvertisement getMyLocalRoute() {
// Update our idea of the local peer adv. If it has change,
// update our idea of the local route adv.
// If nothing has changed, do not do any work.
// In either case, return the local route adv as it is after this
// refresh.
// Race condition possible but tolerable: if two threads discover
// the change in the same time, lastPeerAdv and lastModCount
// could become inconsistent. That'll be straightened out the
// next time someone looks. The inconsistency can only trigger
// an extraneous update.
PeerAdvertisement newPadv = group.getPeerAdvertisement();
int newModCount = newPadv.getModCount();
if ((lastPeerAdv != newPadv) || (lastModCount != newModCount) || (null == localRoute)) {
lastPeerAdv = newPadv;
lastModCount = newModCount;
} else {
// The current version is good.
return localRoute;
}
// Get its EndpointService advertisement
XMLElement endpParam = (XMLElement)
newPadv.getServiceParam(PeerGroup.endpointClassID);
if (endpParam == null) {
if (Logging.SHOW_SEVERE && LOG.isLoggable(Level.SEVERE)) {
LOG.severe("no Endpoint SVC Params");
}
// Return whatever we had so far.
return localRoute;
}
// get the Route Advertisement element
Enumeration paramChilds = endpParam.getChildren(RouteAdvertisement.getAdvertisementType());
XMLElement param;
if (paramChilds.hasMoreElements()) {
param = (XMLElement) paramChilds.nextElement();
} else {
if (Logging.SHOW_SEVERE && LOG.isLoggable(Level.SEVERE)) {
LOG.severe("no Endpoint Route Adv");
}
// Return whatever we had so far.
return localRoute;
}
// build the new route
try {
// Stick the localPeerID in-there, since that was what
// every single caller of getMyLocalRoute did so far.
RouteAdvertisement route = (RouteAdvertisement) AdvertisementFactory.newAdvertisement(param);
route.setDestPeerID(localPeerId);
localRoute = route;
} catch (Exception ex) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.log(Level.WARNING, "Failure extracting route", ex);
}
}
return localRoute;
}
/**
* listener object to synchronize on asynchronous getMessenger
*/
private static class EndpointGetMessengerAsyncListener implements MessengerEventListener {
private final EndpointRouter router;
private final EndpointAddress logDest;
volatile boolean hasResponse = false;
volatile boolean isGone = false;
private Messenger messenger = null;
/**
* Constructor
*
* @param router the router
* @param dest logical destination
*/
EndpointGetMessengerAsyncListener(EndpointRouter router, EndpointAddress dest) {
this.router = router;
this.logDest = dest;
}
/**
* {@inheritDoc}
*/
public boolean messengerReady(MessengerEvent event) {
Messenger toClose = null;
synchronized (this) {
hasResponse = true;
if (event != null) {
messenger = event.getMessenger();
if (null != messenger) {
if(!logDest.equals(messenger.getLogicalDestinationAddress())) {
// Ooops, wrong number !
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Incorrect Messenger logical destination : " + logDest + "!=" + messenger.getLogicalDestinationAddress());
}
toClose = messenger;
messenger = null;
}
} else {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("null messenger for dest :" + logDest);
}
}
} else {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("null messenger event for dest :" + logDest);
}
}
}
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
if (messenger == null) {
LOG.fine("error creating messenger for dest :" + logDest);
} else {
LOG.fine("got a new messenger for dest :" + logDest);
}
}
// We had to release the lock on THIS before we can get the lock on
// the router. (Or face a dead lock - we treat this as a lower level
// lock)
if (messenger == null) {
if (toClose != null) {
toClose.close();
}
// we failed to get a messenger, we need to update the try and
// failed as it currently holds an infinite timeout to permit
// another thread to retry that destination. We only retry
// every MAX_ASYNC_GETMESSENGER_RETRY seconds
router.noMessenger(logDest);
synchronized (this) {
// Only thing that can happen is that we notify for nothing
// We took the lock when updating hasResult, so, the event
// will not be missed.
// FIXME It would be more logical to let the waiter do the
// above if (!isGone) as in the case of success below.
// However, we'll minimize changes for risk management
// reasons.
notify();
}
return false;
}
// It worked. Update router cache entry if we have to.
synchronized (this) {
if (!isGone) {
notify(); // Waiter will do the rest.
return true;
}
}
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("async caller gone add the messenger " + logDest);
}
return router.newMessenger(event);
}
/**
* Wait on the async call for ASYNC_MESSENGER_WAIT
* then bailout. The messenger will be added whenever
* the async getMessenger will return
*
* @param quick if true return a messenger immediately if available,
* otherwise wait the Messenger resolution to be completed
* @return the Messenger if one available
*/
public synchronized Messenger waitForMessenger(boolean quick) {
if (!quick) {
long quitAt = TimeUtils.toAbsoluteTimeMillis(ASYNC_MESSENGER_WAIT);
while (TimeUtils.toRelativeTimeMillis(quitAt) > 0) {
try {
// check if we got a response already
if (hasResponse) { // ok, we got a response
break;
}
wait(ASYNC_MESSENGER_WAIT);
} catch (InterruptedException woken) {
Thread.interrupted();
break;
}
}
}
// mark the fact that the caller is bailing out
isGone = true;
return messenger;
}
}
/**
* isLocalRoute is a shallow test. It tells you that there used to be a
* local route that worked the last time it was tried.
*
* @param peerAddress Address of the destination who's route is desired.
* @return {@code true} if we know a direct route to the specified address
* otherwise {@code false}.
*/
boolean isLocalRoute(EndpointAddress peerAddress) {
return destinations.isCurrentlyReachable(peerAddress);
}
/**
* Get a Messenger for the specified destination if a direct route is known.
*
* @param peerAddress The peer who's messenger is desired.
* @param hint A route hint to use if a new Messenger must be created.
* @return Messenger for direct route or {@code null} if none could be
* found or created.
*/
Messenger ensureLocalRoute(EndpointAddress peerAddress, RouteAdvertisement hint) {
// We need to make sure that there is a possible connection to that peer
// If we have a decent (not closed, busy or available) transport
// messenger in the pool, then we're done. Else we activly try to make
// one.
// See if we already have a messenger.
Messenger messenger = destinations.getCurrentMessenger(peerAddress);
if (messenger != null) {
return messenger;
}
// Ok, try and make one. Pass the route hint info
messenger = findReachableEndpoint(peerAddress, false, hint);
if (messenger == null) {
// We must also zap it from our positive cache: if we remembered it
// working, we should think again.
destinations.noOutgoingMessenger(peerAddress);
return null; // No way.
}
destinations.addOutgoingMessenger(peerAddress, messenger);
// We realy did bring something new. Give relief to those that have been
// waiting for it.
synchronized (this) {
notifyAll();
}
// NOTE to maintainers: Do not remove any negative cache info
// or route here. It is being managed by lower-level routines.
// The presence of a messenger in the pool has many origins,
// each case is different and taken care of by lower level
// routines.
return messenger;
}
/**
* Send a message to a given logical destination if it maps to some
* messenger in our messenger pool or if such a mapping can be found and
* added.
*
* @param destination peer-based address to send the message to.
* @param message the message to be sent.
* @throws java.io.IOException if an io error occurs
*/
void sendOnLocalRoute(EndpointAddress destination, Message message) throws IOException {
IOException lastIoe = null;
Messenger sendVia;
// Try sending the message as long as we get have transport messengers
// to try with. They close when they fail, which puts them out of cache
// or pool if any, so we will not see a broken one a second time. We'll
// try the next one until we run out of options.
while ((sendVia = ensureLocalRoute(destination, null)) != null) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Sending " + message + " to " + destination + " via " + sendVia);
}
try {
// FIXME 20040413 jice Maybe we should use the non-blocking mode
// and let excess messages be dropped given the threading issue
// still existing in the input circuit (while routing messages
// through).
sendVia.sendMessageB(message, EndpointRouter.ROUTER_SERVICE_NAME, null);
// If we reached that point, we're done.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Sent " + message + " to " + destination);
}
return;
} catch (IOException ioe) {
// Can try again, with another messenger (most likely).
lastIoe = ioe;
}
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Trying next messenger to " + destination);
}
// try the next messenger if there is one.
}
// Now see why we're here.
// If we're here for no other reason than failing to get a messenger
// say so. Otherwise, report the failure from the last time we tried.
if (lastIoe == null) {
lastIoe = new IOException("No reachable endpoints for " + destination);
}
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.log(Level.FINE, "Could not send to " + destination, lastIoe);
}
throw lastIoe;
}
/**
* Default constructor
*/
public EndpointRouter() {
}
/**
* {@inheritDoc}
*/
public void init(PeerGroup group, ID assignedID, Advertisement impl) throws PeerGroupException {
timer.schedule(new TimerThreadNamer("EndpointRouter Timer for " + group.getPeerGroupID()), 0);
this.group = group;
this.assignedID = assignedID;
ModuleImplAdvertisement implAdvertisement = (ModuleImplAdvertisement) impl;
localPeerId = group.getPeerID();
localPeerAddr = pid2addr(group.getPeerID());
if (Logging.SHOW_CONFIG && LOG.isLoggable(Level.CONFIG)) {
StringBuilder configInfo = new StringBuilder("Configuring Router Transport : " + assignedID);
if (implAdvertisement != null) {
configInfo.append("\n\tImplementation :");
configInfo.append("\n\t\tModule Spec ID: ").append(implAdvertisement.getModuleSpecID());
configInfo.append("\n\t\tImpl Description : ").append(implAdvertisement.getDescription());
configInfo.append("\n\t\tImpl URI : ").append(implAdvertisement.getUri());
configInfo.append("\n\t\tImpl Code : ").append(implAdvertisement.getCode());
}
configInfo.append("\n\tGroup Params :");
configInfo.append("\n\t\tGroup : ").append(group);
configInfo.append("\n\t\tPeer ID : ").append(group.getPeerID());
configInfo.append("\n\tConfiguration :");
configInfo.append("\n\t\tProtocol : ").append(getProtocolName());
configInfo.append("\n\t\tPublic Address : ").append(localPeerAddr);
LOG.config(configInfo.toString());
}
}
/**
* {@inheritDoc}
*/
public synchronized int startApp(String[] arg) {
endpoint = group.getEndpointService();
if (null == endpoint) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Stalled until there is an endpoint service");
}
return START_AGAIN_STALLED;
}
Service needed = group.getResolverService();
if (null == needed) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Endpoint Router start stalled until resolver service available");
}
return Module.START_AGAIN_STALLED;
}
needed = group.getMembershipService();
if (null == needed) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Endpoint Router start stalled until membership service available");
}
return Module.START_AGAIN_STALLED;
}
needed = group.getRendezVousService();
if (null == needed) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Endpoint Router start stalled until rendezvous service available");
}
return Module.START_AGAIN_STALLED;
}
destinations = new Destinations(endpoint);
try {
// FIXME tra 20030818 Should be loaded as a service
// when we have service dependency. When loaded as a true service should
// not have to pass the EnpointRouter object. The issue is we need an
// api to obtain the real object from the PeerGroup API.
routeCM = new RouteCM();
// FIXME tra 20030818 Should be loaded as a service
// when we have service dependency. When loaded as a true service should
// not have to pass the EnpointRouter object. The issue is we need an
// api to obtain the real object from the PeerGroup API.
routeResolver = new RouteResolver(this);
// initialize persistent CM route Cache
// FIXME tra 20030818 Should be loaded as service when complete
// refactoring is done.
routeCM.init(group, assignedID, null);
// initialize the route resolver
// FIXME tra 20030818 Should be loaded as service when complete
// refactoring is done.
routeResolver.init(group, assignedID, null);
} catch (PeerGroupException failure) {
return -1;
}
int status;
// FIXME tra 20031015 Should be started as a service when refactored work
// completed
status = routeCM.startApp(arg);
if (status != 0) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Route CM failed to start : " + status);
}
return status;
}
// FIXME tra 20031015 Should be started as a service when refactored work
// completed
status = routeResolver.startApp(arg);
if (status != 0) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Route Resolver failed to start : " + status);
}
return status;
}
// publish my local route adv
routeCM.publishRoute(getMyLocalRoute());
// FIXME tra 20031015 is there a risk for double registration when
// startApp() is recalled due to failure to get the discovery service
// by the Route Resolver service.
// NOTE: Endpoint needs to be registered before we register the endpoint
// resolver. This is bringing a more complex issue of service loading
// dependencies.
endpoint.addMessengerEventListener(this, EndpointService.MediumPrecedence);
endpoint.addIncomingMessageListener(this, ROUTER_SERVICE_NAME, null);
if (endpoint.addMessageTransport(this) == null) {
if (Logging.SHOW_SEVERE && LOG.isLoggable(Level.SEVERE)) {
LOG.severe("Transport registration refused");
}
return -1;
}
if (Logging.SHOW_INFO && LOG.isLoggable(Level.INFO)) {
LOG.info(group + " : Router Message Transport started.");
}
return status;
}
/**
* {@inheritDoc}
*
* Careful that stopApp() could in theory be called before startApp().
*/
public synchronized void stopApp() {
stopped = true;
if (endpoint != null) {
endpoint.removeIncomingMessageListener(ROUTER_SERVICE_NAME, null);
endpoint.removeMessengerEventListener(this, EndpointService.MediumPrecedence);
endpoint.removeMessageTransport(this);
}
// FIXME tra 20030818 should be unloaded as a service
routeCM.stopApp();
// FIXME tra 20030818 should be unloaded as a service
routeResolver.stopApp();
destinations.close();
if (Logging.SHOW_INFO && LOG.isLoggable(Level.INFO)) {
LOG.info(group + " : Router Message Transport stopped.");
}
}
/**
* {@inheritDoc}
*/
public boolean isConnectionOriented() {
return false;
}
/**
* {@inheritDoc}
*/
public boolean allowsRouting() {
// Yes, this is the router, and it does not allow routing.
// Otherwise we would have a chicken and egg problem.
return false;
}
/**
* {@inheritDoc}
*/
public EndpointService getEndpointService() {
return endpoint;
}
/**
* {@inheritDoc}
*/
public EndpointAddress getPublicAddress() {
return localPeerAddr;
}
/**
* {@inheritDoc}
*/
public Iterator getPublicAddresses() {
return Collections.singletonList(getPublicAddress()).iterator();
}
/**
* {@inheritDoc}
*/
public String getProtocolName() {
return ROUTER_PROTOCOL_NAME;
}
/**
* Given a peer id, return an address to reach that peer.
* The address may be for a directly reachable peer, or
* for the first gateway along a route to reach the peer.
* If we do not have a route to the peer, we will use the
* Peer Routing Protocol to try to discover one. We will
* wait up to 30 seconds for a route to be discovered.
*
* @param peerAddress the peer we are trying to reach.
* @param seekRoute whether to go as far as issuing a route query, or just fish in our cache.
* when forwarding a message we allow ourselves to mend a broken source-issued route but we
* won't go as far as seeking one from other peers. When originating a message, on the other end
* we will aggressively try to find route.
* @param hint whether we are passed a route hint to be used, in that case that route
* hint should be used
* @return an EndpointAddress at which that peer should be reachable.
*/
EndpointAddress getGatewayAddress(EndpointAddress peerAddress, boolean seekRoute, RouteAdvertisement hint) {
PeerID peerID = addr2pid(peerAddress);
try {
// FIXME 20021215 jice Replace this junk with a background task;
// separate the timings of route disco from the timeouts of
// the requesting threads. EndpointAddress result = null;
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Searching local" + (seekRoute ? " & remote" : "") + " for route for " + peerAddress);
}
// If we can't get a route within the timeout, give up for now.
long quitAt = TimeUtils.toAbsoluteTimeMillis(MAX_FINDROUTE_TIMEOUT);
// Time we need to wait before we can start issue a find route request
// to give a chance for the async messenger to respond (success or failure)
long findRouteAt = TimeUtils.toAbsoluteTimeMillis(ASYNC_MESSENGER_WAIT);
EndpointAddress addr;
while (TimeUtils.toRelativeTimeMillis(quitAt) > 0) {
// Then check if by any chance we can talk to it directly.
Messenger directMessenger = ensureLocalRoute(peerAddress, hint);
if (null != directMessenger) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Found direct route for " + peerAddress + " via " + directMessenger.getDestinationAddress());
}
return peerAddress;
}
// Otherwise, look for a long route.
// check if we got a hint. If that's the case use it
RouteAdvertisement route;
if (hint != null) {
route = hint;
} else {
route = getRoute(peerAddress, seekRoute);
}
if (route != null && route.size() > 0) {
addr = pid2addr(route.getLastHop().getPeerID());
if (ensureLocalRoute(addr, null) != null) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Found last hop remote address: " + peerAddress + " -> " + route.getLastHop().getPeerID());
}
// Ensure local route removes negative cache info about
// addr. We also need to remove that about peerAddress.
return addr;
} else { // need to try the first hop
addr = pid2addr(route.getFirstHop().getPeerID());
if (ensureLocalRoute(addr, null) != null) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Found first hop remote address first hop: " + peerAddress + " -> "
+ route.getFirstHop().getPeerID());
}
// Ensure local route removes negative cache info about addr.
return addr;
} else {
removeRoute(peerID);
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Found no reachable route to " + peerAddress);
}
}
}
}
// For messages we didn't originate we don't seek routes.
if (!seekRoute) {
break;
}
// Check that route resolution is enabled if
// not then bail out, there is nothing more
// that we can do.
if (!routeResolver.useRouteResolver()) {
break;
}
// due to the asynchronous nature of getting our messenger we
// need to handle the multi-entrance of issueing a route
// discovery. A route discovery needs to be generated only
// either if we have no pending request (it completed or we had
// no information so we did not created one), or we tried and
// we failed, or we waited at least ASYNC_MESSENGER_WAIT to get
// a chance for the async request to respond before we can
// issue the route discovery
Long nextTry = triedAndFailed.get(peerID);
if ((nextTry == null) || (nextTry < TimeUtils.toAbsoluteTimeMillis(MAX_ASYNC_GETMESSENGER_RETRY))
|| (TimeUtils.toRelativeTimeMillis(findRouteAt) <= 0)) {
// If it is already hopeless (negative cache), just give up.
// Otherwise, try and recover the route. If a query is not
// already pending, we may trigger a route discovery before we
// wait. Else, just wait. The main problem we have here is that
// the same may re-enter because the resolver query sent by
// findRoute ends up with the rendezvous service trying to
// resolve the same destiation if the destination happens to be
// the start of the walk. In that situation we will re-enter
// at every findRoute attempt until the query becomes "failed".
// However, we do want to do more than one findRoute because
// just one attempt can fail for totaly fortuitous or temporary
// reasons. A tradeoff is to do a very limitted number of attempts
// but still more than one. Over the minute for which the query
// is not failed, isTimeToRety will return true at most twice
// so that'll be a total of three attempts: once every 20 seconds.
boolean doFind = false;
ClearPendingQuery t;
synchronized (pendingQueries) {
t = pendingQueries.get(peerID);
if (t == null) {
doFind = true;
t = new ClearPendingQuery(peerID);
pendingQueries.put(peerID, t);
} else {
if (t.isFailed()) {
break;
}
if (t.isTimeToResolveRoute()) {
doFind = true;
}
}
}
// protect against the async messenger request. We only
// look for a route after the first iteration by
// that time we will have bailed out from the async call
if (doFind) {
routeResolver.findRoute(peerAddress);
// we do not need to check the CM, route table will
// be updated when the route response arrive. This reduces
// CM activities when we wait for the route response
seekRoute = false;
}
}
// Now, wait. Responses to our query may occur asynchronously.
// threads.
synchronized (this) {
// We can't possibly do everything above while synchronized,
// so we could miss an event of interrest. But some changes
// are not readily noticeable anyway, so we must wake up
// every so often to retry.
try {
// we only need to wait if we haven't got a messenger
// yet.
if (destinations.getCurrentMessenger(peerAddress) == null) {
wait(ASYNC_MESSENGER_WAIT);
}
} catch (InterruptedException woken) {
Thread.interrupted();
}
}
}
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("No route to " + peerAddress);
}
return null;
} catch (Exception ex) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.log(Level.WARNING, "getGatewayAddress exception", ex);
}
return null;
}
}
/**
* {@inheritDoc}
*/
@Deprecated
public boolean ping(EndpointAddress addr) {
EndpointAddress plainAddr = new EndpointAddress(addr, null, null);
try {
return (getGatewayAddress(plainAddr, true, null) != null);
} catch (Exception e) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.log(Level.FINE, "Ping failure (exception) for : " + plainAddr, e);
}
return false;
}
}
/**
* Receives notifications of new messengers being generated by the
* underlying network transports.
*
* IMPORTANT: Incoming messengers only. If/when this is used for
* outgoing, some things have to change:
*
* For example we do not need to send the welcome msg, but for
* outgoing messengers, we would need to.
*
* Currently, newMessenger handles the outgoing side.
*
* @param event the new messenger event.
*/
public boolean messengerReady(MessengerEvent event) {
Messenger messenger = event.getMessenger();
Object source = event.getSource();
EndpointAddress logDest = messenger.getLogicalDestinationAddress();
if (source instanceof MessageSender && !((MessageSender) source).allowsRouting()) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Ignoring messenger to :" + logDest);
}
return false;
}
// We learned that a transport messenger has just been announced.
// Nobody else took it, so far, so we'll take it. Incoming messengers
// are not pooled by the endpoint service. We do pool them for our
// exclusive use.
boolean taken = destinations.addIncomingMessenger(logDest, messenger);
// Note to maintainers: Do not remove any route or negative cache info
// here. Here is why: The messenger we just obtained was made out of an
// incoming connection. It brings no proof whatsoever that the peer is
// reachable at our initiative. In general, there is nothing to gain in
// removing our knowlege of a long route, or a pending route query, or a
// triedAndFailed record, other than to force trying a newly obtained
// set of addresses. They will not stop us from using this messenger as
// long as it works. The only good thing we can do here, is waking up
// those that may be waiting for a connection.
synchronized (this) {
notifyAll();
}
return taken;
}
/**
* Call when an asynchronous new messenger could not be obtained.
*
* @param logDest the failed logical destination
*/
void noMessenger(EndpointAddress logDest) {
// Switch to short timeout if there was an infinite one.
// Note if there's one, it is either short or inifinite. So we
// look at the value only in the hope it is less expensive
// than doing a redundant put.
PeerID peerID = addr2pid(logDest);
synchronized (this) {
Long curr = triedAndFailed.get(peerID);
if (curr != null && curr > TimeUtils.toAbsoluteTimeMillis(MAX_ASYNC_GETMESSENGER_RETRY)) {
triedAndFailed.put(peerID, TimeUtils.toAbsoluteTimeMillis(MAX_ASYNC_GETMESSENGER_RETRY));
}
}
}
/**
* Call when an asynchronous new messenger is ready.
* (name is not great).
*
* @param event the new messenger event.
* @return always returns true
*/
boolean newMessenger(MessengerEvent event) {
Messenger messenger = event.getMessenger();
EndpointAddress logDest = messenger.getLogicalDestinationAddress();
// We learned that a new transport messenger has just been announced.
// We pool it for our exclusive use.
destinations.addOutgoingMessenger(logDest, messenger);
// Here's a new connection. Wakeup those that may be waiting for that.
synchronized (this) {
notifyAll();
}
return true;
}
/**
* Get the routed route, if any, for a given peer id.
*
* @param peerAddress the peer who's route is desired.
* @param seekRoute boolean to indicate if we should search for a route
* if we don't have one
* @return a route advertisement describing the direct route to the peer.
*/
RouteAdvertisement getRoute(EndpointAddress peerAddress, boolean seekRoute) {
ID peerID = addr2pid(peerAddress);
// check if we have a valid route
RouteAdvertisement route;
synchronized (this) {
route = routedRoutes.get(peerID);
}
if (route != null || !seekRoute) { // done
return route;
}
// No known route and we're allowed to search for one
// check if there is route advertisement available
Iterator allRadvs = routeCM.getRouteAdv(peerID);
while (allRadvs.hasNext()) {
route = allRadvs.next();
Vector hops = route.getVectorHops();
// no hops, uninterresting: this needs to be a route
if (hops.isEmpty()) {
continue;
}
// let's check if we can speak to any of the hops in the route
// we try them in reverse order so we shortcut the route
// in the process
RouteAdvertisement newRoute = (RouteAdvertisement)
AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());
newRoute.setDest(route.getDest().clone());
Vector newHops = new Vector();
// build the route from the available hops
for (int i = hops.size() - 1; i >= 0; i--) {
ID hopID = hops.elementAt(i).getPeerID();
// If the local peer is one of the first reachable
// hop in the route, that route is worthless to us.
if (localPeerId.equals(hopID)) {
break;
}
EndpointAddress addr = pid2addr(hopID);
if (ensureLocalRoute(addr, null) != null) {
// we found a valid hop return the corresponding
// route from that point
for (int j = i; j <= hops.size() - 1; j++) {
newHops.add(hops.elementAt(j).clone());
}
// make sure we have a real route at the end
if (newHops.isEmpty()) {
break;
}
newRoute.setHops(newHops);
// try to set the route
if (setRoute(newRoute, false)) {
// We got one; we're done.
return newRoute;
} else {
// For some reason the route table does not
// want that route. Move on to the next adv; it
// unlikely that a longer version of the same would
// be found good.
break;
}
}
}
}
// no route found
return null;
}
/**
* Check if a route is valid.
* Currently, only loops are detected.
*
* @param routeAdvertisement The route to check.
* @return {@code true} if the route is valid otherwise {@code false}.
*/
private boolean checkRoute(RouteAdvertisement routeAdvertisement) {
if (0 == routeAdvertisement.size()) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("route is empty");
}
return false;
}
if (routeAdvertisement.containsHop(localPeerId)) {
// The route does contain this local peer. Using this route
// would create a loop. Discard.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("route contains this peer - loopback");
}
return false;
}
PeerID destPid = routeAdvertisement.getDest().getPeerID();
if (routeAdvertisement.containsHop(destPid)) {
// May be it is fixable, may be not. See to it.
Vector hops = routeAdvertisement.getVectorHops();
// It better be the last hop. Else this is a broken route.
hops.remove(hops.lastElement());
if (routeAdvertisement.containsHop(destPid)) {
// There was one other than last: broken route.
return false;
}
}
if (routeAdvertisement.hasALoop()) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("route has a loop ");
}
return false;
} else {
// Seems to be a potential good route.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("route is ok");
}
return true;
}
}
// Adds a new long route provided there not a direct one already.
// Replaces any longer route. return true if the route was truely new.
// The whole deal must be synch. We do not want to add a long route
// while a direct one is being added in parallell or other stupid things like that.
/**
* set new route info
*
* @param route new route to learn
* @param force true if the route was obtained by receiving
* a message
* @return true if route was truly new
*/
boolean setRoute(RouteAdvertisement route, boolean force) {
PeerID peerID;
EndpointAddress peerAddress;
boolean pushNeeded = false;
boolean status;
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("setRoute:");
}
if (route == null) {
return false;
}
synchronized (this) {
try {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine(route.display());
}
peerID = route.getDest().getPeerID();
peerAddress = pid2addr(peerID);
// Check if we are in the case where we are
// setting a new route as we received a message
// always force the new route setup when we received a
// a message
if (!force) {
// check if we have some bad NACK route info for
// this destination
BadRoute badRoute = badRoutes.get(peerAddress);
if (badRoute != null) {
Long nextTry = badRoute.getExpiration();
if (nextTry > System.currentTimeMillis()) {
// check if the route we have in the NACK cache match the
// new one. Need to make sure that we clean the route
// from any endpoint addresses as the badRoute cache only
// contains PeerIDs
RouteAdvertisement routeClean = route.cloneOnlyPIDs();
if (routeClean.equals(badRoute.getRoute())) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("try to use a known bad route");
}
return false;
}
} else {
// expired info, just flush NACK route cache
badRoutes.remove(peerAddress);
}
}
} else {
// we get a new route
badRoutes.remove(peerAddress);
}
// Check if the route makes senses (loop detection)
if (!checkRoute(route)) {
// Route is invalid. Drop it.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Route is invalid");
}
return false;
}
// check if we can reach the first hop in the route
// We only do a shallow test of the first hop. Whether more effort
// is worth doing or not is decided (and done) by the invoker.
if (!isLocalRoute(pid2addr(route.getFirstHop().getPeerID()))) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Unreachable route - ignore");
}
return false;
}
} catch (Exception ez1) {
// The vector must be empty, which is not supposed to happen.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Got an empty route - discard" + route.display());
}
return false;
}
// add the new route
try {
// push the route to SRDI only if it is a new route. the intent is
// to minimize SRDI traffic. The SRDIinformation is more of the order
// this peer has a route to this destination, it does not need to be
// updated verey time the route is updated. Information about knowing
// that this peer has a route is more important that the precise
// route information
// SRDI is run only if the peer is acting as a rendezvous
if (group.isRendezvous()) {
if (!routedRoutes.containsKey(peerID)) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("push new SRDI route " + peerID);
}
pushNeeded = true;
}
}
// new route so publish the known route in our cache
if (!routedRoutes.containsKey(peerID)) {
routeCM.createRoute(route);
newDestinations.add(peerAddress);
}
// Remove any endpoint addresses from the route
// as part of the cloning. We just keep track
// of PIDs in our route table
RouteAdvertisement newRoute = route.cloneOnlyPIDs();
routedRoutes.put(peerID, newRoute);
// We can get rid of any negative info we had. We have
// a new and different route.
badRoutes.remove(peerAddress);
notifyAll(); // Wakeup those waiting for a route.
status = true;
} catch (Exception e2) {
// We failed, leave things as they are.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine(" failed setting route with " + e2);
}
status = false;
}
}
// due to the potential high latency of making the
// srdi revolver push we don't want to hold the lock
// on the EndpointRouter object as we may have to
// discover a new route to a rendezvous
if (pushNeeded && status) {
// we are pushing the SRDI entry to a replica peer
routeResolver.pushSrdi(null, peerID);
}
return status;
}
/**
* This method is used to remove a route
*
* @param peerID route to peerid to be removed
*/
void removeRoute(PeerID peerID) {
boolean needRemove;
synchronized (this) {
needRemove = false;
if (routedRoutes.containsKey(peerID)) {
if (group.isRendezvous()) {
// Remove the SRDI cache entry from the SRDI cache
needRemove = true;
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("remove SRDI route " + peerID);
}
}
routedRoutes.remove(peerID);
}
}
// due to the potential high latency of pushing
// the SRDI message we don't want to hold the EndpointRouter
// object lock
if (needRemove) {
// We are trying to flush it from the replica peer
// Note: this is not guarantee to work if the peerview
// is out of sync. The SRDI index will be locally
// repaired as the peerview converge
routeResolver.removeSrdi(null, peerID);
}
}
/**
* {@inheritDoc}
*/
public void processIncomingMessage(Message msg, EndpointAddress srcAddr, EndpointAddress dstAddr) {
EndpointAddress srcPeerAddress;
EndpointAddress destPeer;
EndpointAddress lastHop = null;
boolean connectLastHop = false;
EndpointAddress origSrcAddr;
EndpointAddress origDstAddr;
Vector origHops = null; // original route of the message
EndpointRouterMessage routerMsg;
EndpointAddress nextHop = null;
RouteAdvertisement radv;
// We do not want the existing header to be ignored of course.
routerMsg = new EndpointRouterMessage(msg, false);
if (!routerMsg.msgExists()) {
// The sender did not use this router
if (Logging.SHOW_FINE && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Discarding " + msg + ". No routing info.");
}
return;
}
try {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine(routerMsg.display());
}
origSrcAddr = routerMsg.getSrcAddress();
origDstAddr = routerMsg.getDestAddress();
// convert the src and dest addresses into canonical
// form stripping service info
srcPeerAddress = new EndpointAddress(origSrcAddr, null, null);
destPeer = new EndpointAddress(origDstAddr, null, null);
lastHop = routerMsg.getLastHop();
// See if there's an originator full route adv inthere.
// That's a good thing to keep.
radv = routerMsg.getRouteAdv();
if (radv != null) {
// publish the full route adv. Also, leave it the
// message. It turns out to be extremely usefull to
// peers downstream, specially the destination. If
// this here peer wants to embed his own radv, it will
// have to wait; the one in the message may not come
// again.
// FIXME - [email protected] 20040413 : all this could wait (couldn't it ?)
// until we know it's needed, therefore parsing could wait as well.
// Looks like a safe bet to try and ensure a
// connection in the opposite direction if there
// isn't one already.
if (pid2addr(radv.getDestPeerID()).equals(lastHop)) {
connectLastHop = true;
}
// Make the most of that new adv.
setRoute(radv, true);
updateRouteAdv(radv);
}
} catch (Exception badHdr) {
// Drop it, we do not even know the destination
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Bad routing header or bad message. Dropping " + msg);
}
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.log(Level.FINE, "Exception: ", badHdr);
}
return;
}
// Is this a loopback ?
if ((srcPeerAddress != null) && srcPeerAddress.equals(localPeerAddr)) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("dropped loopback");
}
return;
}
// Are we already sending to ourself. This may occur
// if some old advertisements for our EA is still
// floating around
if ((lastHop != null) && lastHop.equals(localPeerAddr)) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("dropped loopback from impersonating Peer");
}
return;
}
// We have to try and reciprocate the connection, so that we
// have chance to learn reverse routes early enough. If we do
// not already have a messenger, then we must know a route adv
// for that peer in order to be able to connect. Otherwise,
// the attempt will fail and we'll be left with a negative
// entry without having realy tried anything. To prevent that
// we rely on the presence of a radv in the router message. If
// there's no radv, two possibilities:
//
// - It is not the first contact from that peer and we already
// have tried (with or without success) to reciprocate.
//
// - It is the first contact from that peer but it has not
// embedded its radv. In the most likely case (an edge peer
// connecting to a rdv), the edge peer will have no difficulty
// finding the reverse route, provided that we do not make a
// failed attempt right now.
//
// Conclusion: if there's no embedded radv in the message, do
// nothing.
if (connectLastHop) {
ensureLocalRoute(lastHop, radv);
}
try {
// Normalize the reverseHops vector from the message and, if it
// looks well formed and usefull, learn from it. Do we have a
// direct route to the origin ? If yes, we'll zap the revers
// route in the message: we're a much better router. else,
// learn from it. As a principle we regard given routes to be
// better than existing ones.
Vector reverseHops = routerMsg.getReverseHops();
if (reverseHops == null) {
reverseHops = new Vector();
}
// check if we do not have a direct route
// in that case we don't care to learn thelong route
if (!isLocalRoute(srcPeerAddress)) {
// Check if the reverseRoute info looks correct.
if (lastHop != null) {
// since we are putting the lasthop in the
// reverse route to indicate the validity of
// lastop to reach the previous hop, we have
// the complete route, just clone it. (newRoute
// owns the given vector)
if ((reverseHops.size() > 0) && reverseHops.firstElement().getPeerID().equals(addr2pid(lastHop))) {
// Looks like a good route to learn
setRoute(RouteAdvertisement.newRoute(addr2pid(srcPeerAddress), null, (Vector) reverseHops.clone()), true);
}
}
}
// If this peer is the final destination, then we're done. Just let
// it be pushed up the stack. We must not leave our header;
// it is now meaningless and none of the upper layers business.
// All we have to do is to supply the end-2-end src and dest
// so that the endpoint demux routine can do its job.
if (destPeer.equals(localPeerAddr)) {
// Removing the header.
routerMsg.clearAll();
routerMsg.updateMessage();
// receive locally
endpoint.processIncomingMessage(msg, origSrcAddr, origDstAddr);
return;
}
// WATCHOUT: if this peer is part of the reverse route
// it means that we've seen that message already: there's
// a loop between routers ! If that happens drop that
// message as if it was burning our fingers
// First build the ap that we might add to the reverse route.
// We need it to look for ourselves in reverseHops. (contains
// uses equals(). equals will work because we always include
// in reversehops aps that have only a peerAddress.
AccessPointAdvertisement selfAp = (AccessPointAdvertisement)
AdvertisementFactory.newAdvertisement(AccessPointAdvertisement.getAdvertisementType());
selfAp.setPeerID(localPeerId);
if (reverseHops.contains(selfAp)) {
// Danger, bail out !
// Better not to try to NACK for now, but get rid of our own
// route. If we're sollicited again, there won't be a loop
// and we may NACK.
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Routing loop detected. Message dropped");
}
removeRoute(addr2pid(destPeer));
return;
}
// Update reverseHops. That is, add ourselves to the list.
// We will only add the current hop to the reverse
// route if we know how to talk back to the previous hop
// it is important to point the difference between the lastHop
// and the reverse route entry. The lastHop indicates where the
// message came from but does not specify whether it is able to
// route messages in the other direction. The reverse route, if
// present, provides that information.
// FIXME - [email protected] 20040413 : HERE comes the use of connectLastHop. Could have waited till here.
if (isLocalRoute(lastHop)) { // ok we have direct route back, at least we hope :-)
reverseHops.add(0, selfAp); // Update our vector
routerMsg.prependReverseHop(selfAp); // Update the message, this preserves the cache.
} else {
// We cannot talk to our previous hop, well
// check if we have route to the src and use it as
// our reverse route. We could do more. But let's keep
// it to the minimum at this point.
RouteAdvertisement newReverseRoute = routedRoutes.get(addr2pid(srcPeerAddress));
if (newReverseRoute != null) {
// we found a new route back from our cache so let's use it
reverseHops = (Vector) newReverseRoute.getVectorHops().clone();
// ok add ourselve to the reverse route
reverseHops.add(0, selfAp);
} else {
// no new route found, sorry. In the worst
// case it is better to not have reverse route
reverseHops = null;
}
// In both cases above, we replace the hops completely.
// The cache is of no use and is lost.
routerMsg.setReverseHops(reverseHops);
}
// Get the next peer into the forward route
origHops = routerMsg.getForwardHops();
if (origHops != null) {
nextHop = getNextHop(origHops);
}
// see if we can shortcut to the destination with no effort.
// If that works it's all very easy.
if (isLocalRoute(destPeer)) {
// There is a local route - use it
// Clear the forward path which is probably wrong
routerMsg.setForwardHops(null);
nextHop = destPeer;
} else {
if (nextHop == null) {
// No next hop. Use the destPeer instead. (but, unlike when
// we shortcut it deliberately, don't know if we can have a direct route
// yet). This is perfectly normal if we're just the last
// hop before the destination and we have closed the direct connection
// with it since we declared to be a router to it.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("No next hop in forward route - Using destination as next hop");
}
nextHop = destPeer;
// That forward path is exhausted. It will not be usefull anymore.
// either we reach the destination directly and there will be
// no need for a NACK further down, or we will need to find an alternate
// route.
routerMsg.setForwardHops(null);
}
// We must be do better than look passively for a direct
// route. The negative cache will take care of reducing the
// implied load. If we do not, then we never re-establish
// a broken local route until the originating peer seeks a
// new route. Then the result is roughly the same plus
// the overhead of route seeking...worse, if we're in the
// path from the originator to it's only rdv, then the
// originator does not stand a chance until it re-seeds !
if (ensureLocalRoute(nextHop, null) == null) {
// need to look for a long route.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Forward route element broken - trying alternate route");
}
// While we're at it, we might as well get rid of our own
// route to the destination if it goes through the same hop
// by any chance.
// FIXME: idealy, each time we get a broken local route
// we'd want to get rid of all routes that start from there
// but that's one more map to maintain.
RouteAdvertisement route = getRoute(destPeer, false);
if (route == null) {
cantRoute("No new route to repair the route - drop message", null, origSrcAddr, destPeer, origHops);
return;
}
if (pid2addr(route.getFirstHop().getPeerID()).equals(nextHop)) {
// Our own route is just as rotten as the sender's. Get rid
// of it.
removeRoute(addr2pid(destPeer));
cantRoute("No better route to repair the route - drop message", null, origSrcAddr, destPeer, origHops);
return;
}
// optimization to see if we can reach
// directly the last hop of that route
EndpointAddress addr = pid2addr(route.getLastHop().getPeerID());
if (isLocalRoute(addr)) {
// FIXME - [email protected] 20030723. Should update our route table to reflect the shortcut.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Found new remote route via : " + addr);
}
// set the forward path to null no next hop
// FIXME: Not true. the last hop is not the destination.
// There could be a need for us receiving a NACK and that won't be
// possible. We should leave the next hop in the fw path. Just like
// we do when forwarding along the existing route.
routerMsg.setForwardHops(null);
} else { // need to check the first hop
Vector newHops = (Vector) route.getVectorHops().clone();
// FIXME: remove(0) seems wrong
// There could be a need for us receiving a NACK and that won't be
// possible. We should leave the next hop in the fw path. Just like
// we do when forwarding along the existing route.
addr = pid2addr(newHops.remove(0).getPeerID());
if (!isLocalRoute(addr)) {
// Our own route is provably rotten
// as well. Get rid of it.
removeRoute(addr2pid(destPeer));
cantRoute("No usable route to repair the route - drop message", null, origSrcAddr, destPeer, origHops);
return;
}
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Found new remote route via : " + addr);
}
// NB: setForwardHops does not clone.
routerMsg.setForwardHops(newHops);
}
// If we're here. addr is our new nextHop.
nextHop = addr;
}
}
// The first time we talk to a peer to which we have
// initiated a connection, we must include our local
// route adv in the routerMsg. However, we give priority to
// a route adv that's already in the message and which we pass along.
// In that case, our own will go next time. Note: we care only for
// nextHop, not for the final destination. We give our radv to a far
// destination only if we originate a message to it; not when forwarding.
// JC: give priority to our own radv instead. It can be critical.
// 20040301 tra: May be the case we haven't yet initialize our
// own local route. For example still waiting for our relay connection
RouteAdvertisement myRoute = getMyLocalRoute();
if ((myRoute != null) && destinations.isWelcomeNeeded(nextHop)) {
routerMsg.setRouteAdv(myRoute);
}
// We always modify the router message within the message
routerMsg.setLastHop(localPeerAddr);
routerMsg.updateMessage();
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Trying to forward to " + nextHop);
}
sendOnLocalRoute(nextHop, msg);
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Successfully forwarded to " + nextHop);
}
} catch (Exception e) {
cantRoute("Failed to deliver or forward message for " + destPeer, e, origSrcAddr, destPeer, origHops);
}
}
private void cantRoute(String logMsg, Exception exception, EndpointAddress origSrcAddr, EndpointAddress destPeer, Vector origHops) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
if (exception == null) {
LOG.warning(logMsg);
} else {
LOG.log(Level.WARNING, logMsg, exception);
}
}
routeResolver.generateNACKRoute(addr2pid(origSrcAddr), addr2pid(destPeer), origHops);
}
/**
* Return the address of the next hop in this vector
*
* @param hops of forward hops in the route
* @return next hop to be used
*/
private EndpointAddress getNextHop(Vector hops) {
// check if we have a real route
if ((hops == null) || (hops.size() == 0)) {
return null;
}
// find the next hop.
for (Enumeration e = hops.elements(); e.hasMoreElements();) {
AccessPointAdvertisement ap = (AccessPointAdvertisement) e.nextElement();
if (localPeerId.equals(ap.getPeerID())) {
// If found at the end, no next hop
if (!e.hasMoreElements()) {
return null;
}
return pid2addr(((AccessPointAdvertisement) e.nextElement()).getPeerID());
}
}
// The peer is not into the vector. Since we have got that
// message, the best we can do is to send it to the first gateway
// in the forward path.
return pid2addr(((AccessPointAdvertisement) hops.elementAt(0)).getPeerID());
}
/**
* lame hard-coding
*
* @param p message transport
* @return true if fast
*/
private boolean isFast(MessageTransport p) {
String name = p.getProtocolName();
return name.equals("tcp") || name.equals("beep");
}
private boolean isRelay(MessageTransport p) {
String name = p.getProtocolName();
return name.equals("relay");
}
/**
* Given a list of addresses, find the best reachable endpoint.
*
*
*
The address returned must be reachable.
*
We prefer an address whose protocol is, in order:
*
*
connected and fast.
*
connected and slow.
*
unconnected and fast.
*
unconnected and slow
*
*
*
* @param dest destination address.
* @param mightWork A list of addresses to evaluate reachability.
* @param exist true if there already are existing messengers for
* the given destinations but we want one more. It may lead us to reject
* certain addresses that we would otherwise accept.
* @return The endpoint address for which we found a local route otherwise
* null
*/
Messenger findBestReachableEndpoint(EndpointAddress dest, List mightWork, boolean exist) {
List rankings = new ArrayList(mightWork.size());
List worthTrying = new ArrayList(mightWork.size());
// First rank the available addresses by type rejecting those which
// cant be used.
for (Object aMightWork : mightWork) {
EndpointAddress addr = (EndpointAddress) aMightWork;
// skip our own type
if (getProtocolName().equals(addr.getProtocolName())) {
continue;
}
int rank = -1;
Iterator eachTransport = endpoint.getAllMessageTransports();
while (eachTransport.hasNext()) {
MessageTransport transpt = eachTransport.next();
if (!transpt.getProtocolName().equals(addr.getProtocolName())) {
continue;
}
// must be a sender
if (!(transpt instanceof MessageSender)) {
continue;
}
MessageSender sender = (MessageSender) transpt;
// must allow routing
if (!sender.allowsRouting()) {
// This protocol should not be used for routing.
continue;
}
rank += 1;
if (sender.isConnectionOriented()) {
rank += 2;
}
if (isRelay(transpt)) {
// That should prevent the relay for ever being used
// when the relay may be sending through the router.
if (exist) {
rank -= 1000;
}
}
if (isFast(transpt)) {
rank += 4;
}
}
// if its worth trying then insert it into the rankings.
if (rank >= 0) {
for (int eachCurrent = 0; eachCurrent <= rankings.size(); eachCurrent++) {
if (rankings.size() == eachCurrent) {
rankings.add(rank);
worthTrying.add(addr);
break;
}
if (rank > rankings.get(eachCurrent)) {
rankings.add(eachCurrent, rank);
worthTrying.add(eachCurrent, addr);
break;
}
}
}
}
// now that we have them ranked, go through them until we get a
// successful messenger.
rankings = null;
for (EndpointAddress addr : worthTrying) {
try {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Trying : " + addr);
}
// We use an async getMessenger as we do not
// want to wait too long to obtain our messenger
// We will still wait ASYNCMESSENGER_WAIT to see
// if we can get the messenger before bailing out
// Create the listener object for that request
EndpointGetMessengerAsyncListener getMessengerListener = new EndpointGetMessengerAsyncListener(this, dest);
boolean stat = endpoint.getMessenger(getMessengerListener, new EndpointAddress(addr, ROUTER_SERVICE_NAME, null)
,
null);
if (!stat) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Failed to create async messenger to : " + addr);
}
// we failed to get a messenger, we need to update the try and
// failed as it currently holds an infinite timeout to permit
// another thread to retry that destination. We only retry
// every MAX_ASYNC_GETMESSENGER_RETRY seconds
synchronized (this) {
triedAndFailed.put(addr2pid(dest), TimeUtils.toAbsoluteTimeMillis(MAX_ASYNC_GETMESSENGER_RETRY));
}
continue;
}
// wait to see if we can get the Async messenger
// If there is a long route to that destination, do not
// wait on the direct route.
// It may happen that we are actually
// trying to reach a different peer and this is just part of
// shortcuting the route via the one of the hops. In that case
// this test is not entirely accurate. We might still decide
// to wait when we shouldn't (we're no worse than before, then)
// But, in most cases, this is going to help.
boolean quick = (getRoute(dest, false) != null);
Messenger messenger = getMessengerListener.waitForMessenger(quick);
if (messenger == null) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("did not get our async messenger. continue");
}
} else {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("we got our async messenger, proceed");
}
// Success we got a messenger synchronously. Remove
// the negative cache entry.
synchronized (this) {
triedAndFailed.remove(addr2pid(dest));
notifyAll();
}
return messenger;
}
} catch (RuntimeException e) {
// That address is somehow broken.
// Cache that result for a while.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.log(Level.FINE, "failed checking route", e);
}
}
}
return null;
}
/**
* Read the route advertisement for a peer and find a suitable transport
* endpoint for sending to that peer either directly or via one of
* the advertised peer router
*
* @param destPeerAddress dest address
* @param exist use existing messengers, avoid creating a new one
* @param hint route hint
* @return a reachable messenger
*/
Messenger findReachableEndpoint(EndpointAddress destPeerAddress, boolean exist, RouteAdvertisement hint) {
PeerID destPeerID = addr2pid(destPeerAddress);
// findReachableEndpoint is really lazy because what it does is expensive.
// When needed, the negative info that prevents its from working
// too much is removed. (see calls to ensureLocalRoute).
synchronized (this) {
Long nextTry = triedAndFailed.get(destPeerID);
if (nextTry != null) {
if (nextTry > TimeUtils.timeNow()) {
return null;
}
}
// We are the first thread trying this destination. Let's preclude
// any other threads from attempting to do anything while we are
// trying that destination. Other threads will have a chance if they
// are still waiting when this thread is done. We will update
// triedAndFailed when we get the async notification that we got or
// we failed to get a messenger.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Temporarly adding " + destPeerAddress.toString() + " to triedAndFailed, while attempting connection");
}
triedAndFailed.put(destPeerID, TimeUtils.toAbsoluteTimeMillis(Long.MAX_VALUE));
}
// Never tried or it was a long time ago.
// Get (locally) the advertisements of this peer
Iterator advs;
try {
// try to use the hint that was given to us
if (hint != null) {
advs = Collections.singletonList(hint).iterator();
} else {
// Ok extract from the CM
advs = routeCM.getRouteAdv(destPeerID);
}
// Check if we got any advertisements
List addrs = new ArrayList();
while (advs.hasNext()) {
RouteAdvertisement adv = advs.next();
String saddr = null;
// add the destination endpoint
for (Enumeration e = adv.getDest().getEndpointAddresses(); e.hasMoreElements();) {
try {
saddr = e.nextElement();
addrs.add(new EndpointAddress(saddr));
} catch (Throwable ex) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine(" bad address in route adv : " + saddr);
}
}
}
}
// ok let's go and try all these addresses
if (!addrs.isEmpty()) {
Messenger bestMessenger = findBestReachableEndpoint(destPeerAddress, addrs, exist);
if (bestMessenger != null) {
// Found a direct route. Return it.
// Tried+failed has been cleaned.
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("found direct route");
}
return bestMessenger;
}
} else {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("findReachableEndpoint : Failed due to empty address list");
}
}
} catch (RuntimeException e) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.log(Level.WARNING, "Failure looking for an address ", e);
}
}
// We're done trying. Since we did not find anything at all (or failed,
// during the atempt) the triedFailed record is still set to infinite
// value. Reset it to finite.
// There is a small chance that another thread did find
// something in parallel, but that's very unlikely and
// if it is rare enough then the damage is small.
synchronized (this) {
triedAndFailed.put(destPeerID, TimeUtils.toAbsoluteTimeMillis(MAX_ASYNC_GETMESSENGER_RETRY));
}
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("did not find a direct route to :" + destPeerAddress);
}
return null;
}
/**
* {@inheritDoc}
*/
public Messenger getMessenger(EndpointAddress addr, Object hint) {
RouteAdvertisement routeHint = null;
EndpointAddress plainAddr = new EndpointAddress(addr, null, null);
// If the dest is the local peer, just loop it back without going
// through the router.
if (plainAddr.equals(localPeerAddr)) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("return LoopbackMessenger");
}
return new LoopbackMessenger(group, endpoint, localPeerAddr, addr, addr);
}
try {
// try and add that hint to our cache of routes (that may be our only route).
if (hint != null && hint instanceof RouteAdvertisement) {
routeHint = ((RouteAdvertisement) hint).clone();
AccessPointAdvertisement firstHop = routeHint.getFirstHop();
PeerID firstHopPid;
EndpointAddress firstHopAddr = null;
// If the firstHop is equal to the destination, clean that up,
// that's a direct route. If the first hop is the local peer
// leave it there but treat it as a local route. That's what
// it is from the local peer point of view.
if (firstHop != null) {
firstHopPid = firstHop.getPeerID();
firstHopAddr = pid2addr(firstHopPid);
if (firstHopAddr.equals(addr)) {
routeHint.removeHop(firstHopPid);
firstHop = null;
} else if (firstHopPid.equals(localPeerId)) {
firstHop = null;
}
}
if (firstHop == null) {
// The hint is a direct route. Make sure that we have the
// route adv so that we can actually connect.
// we only need to publish this route if we don't know about
// it yet.
EndpointAddress da = pid2addr(routeHint.getDestPeerID());
if (!isLocalRoute(da) && !routedRoutes.containsKey(routeHint.getDestPeerID())) {
routeCM.publishRoute(routeHint);
}
} else {
// For the hint to be useful, we must actively try the first
// hop. It is possible that we do not know it yet and that's
// not a reason to ignore the hint (would ruin the purpose
// in most cases).
RouteAdvertisement routeFirstHop = null;
// Manufacture a RA just that as just the routerPeer as a
// destination. We only need to publish this route if we
// don't know about it yet.
if (!isLocalRoute(firstHopAddr) && !routedRoutes.containsKey(firstHop.getPeerID())) {
routeFirstHop = (RouteAdvertisement)
AdvertisementFactory.newAdvertisement(RouteAdvertisement.getAdvertisementType());
routeFirstHop.setDest(firstHop.clone());
// Here we used to pass a second argument with value
// true which forced updateRouteAdv to ignore a
// pre-existing identical adv and remove negative cache
// information anyway. The reason for doing that was
// that sometimes the new route adv does already exist
// but has not yet been tried. We cannot do that; it
// exposes us too much to retrying incessantly the same
// address. A hint cannot be trusted to such an extent.
// The correct remedy is to be able to tell accurately
// if there really is an untried address in that radv,
// which requires a sizeable refactoring. in the
// meantime just let the negative cache play its role.
updateRouteAdv(routeFirstHop);
}
// if we constructed the route hint then passes it in the
// past we were just relying on the CM now that the CM can
// be disabled, we have to pass the argument.
if (ensureLocalRoute(firstHopAddr, routeFirstHop) != null) {
setRoute(routeHint.clone(), false);
}
}
}
} catch (Throwable ioe) {
// Enforce a stronger semantic to hint. If the application passes
// a hint that is rotten then this is an application problem
// we should not try to fix what was given to us.
return null;
}
try {
// Build a persistent RouterMessenger around it that will add our
// header. If a hint was passed to us we just use it as it. Too bad
// if it is not the the right one. In that mode it is the
// responsibility of the application to make sure that a correct
// hint was passed.
return new RouterMessenger(addr, this, routeHint);
} catch (IOException caught) {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.log(Level.FINE, "Can\'t generate messenger for addr " + addr, caught);
}
return null;
}
}
/**
* Updates the router element of a message and returns the peerAddress address of
* the next hop (where to send the message).
*
* Currently, address message is only called for messages that we
* originate. As a result we will always aggressively seek a route if needed.
*
* @param message the message for which to compute/update a route.
* @param dstAddress the final destination of the route which the message be set to follow.
* @return EndpointAddress The address (logical) where to send the message next. Null if there
* is nowhere to send it to.
*/
EndpointAddress addressMessage(Message message, EndpointAddress dstAddress) {
if (endpoint == null) {
return null;
}
// We need to create a RouterMessage
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Create a new EndpointRouterMessage " + dstAddress);
}
// Specify that we do not want an existing msg parsed.
EndpointRouterMessage routerMsg = new EndpointRouterMessage(message, true);
if (routerMsg.isDirty()) {
// Oops there was one in the message already. This must be a
// low-level protocol looping back through the router. The relay can
// be led to do that in some corner cases.
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Probable transport recursion");
}
throw new IllegalStateException("RouterMessage element already present");
}
routerMsg.setSrcAddress(localPeerAddr);
routerMsg.setDestAddress(dstAddress);
EndpointAddress theGatewayAddress;
EndpointAddress dstAddressPlain = new EndpointAddress(dstAddress, null, null);
try {
RouteAdvertisement route = null;
theGatewayAddress = getGatewayAddress(dstAddressPlain, true, null);
if (theGatewayAddress == null) {
// Cleanup the message, so that the invoker
// may retry (with a different hint, for example).
routerMsg.clearAll();
routerMsg.updateMessage();
return null;
}
// Check that we're actually going through a route; we could have one
// but not be using it, because we know of a volatile shortcut.
// FIXME: [email protected] - 20030512: This is not very clean:
// getGatewayAddress should be giving us the route that it's using, if any.
// By doing the fetch ourselves, not only do we waste CPU hashing
// twice, but we could also get a different route !
if (!theGatewayAddress.equals(dstAddressPlain)) {
route = getRoute(dstAddressPlain, false);
}
// If we're going through a route for that, stuff it in the
// message. NB: setForwardHops does not clone.
if (route != null) {
routerMsg.setForwardHops((Vector) route.getVectorHops().clone());
}
// set the last hop info to point to the local peer info
// The recipient takes last hop to be the last peer that the message has traversed
// before arriving.
routerMsg.setLastHop(localPeerAddr);
// The first time we talk to a peer to which we have
// initiated a connection, we must include our local
// route adv in the routerMsg.
RouteAdvertisement myRoute = getMyLocalRoute();
if (myRoute != null) {
// FIXME - [email protected] 20040430 : use destinations instead of newDestinations, even for routed ones.
boolean newDest = newDestinations.remove(dstAddressPlain);
boolean newGatw = destinations.isWelcomeNeeded(theGatewayAddress);
if (newDest || newGatw) {
routerMsg.setRouteAdv(myRoute);
}
}
// Push the router header onto the message.
// That's all we have to do for now.
routerMsg.updateMessage();
} catch (Exception ez1) {
// Not much we can do
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.log(Level.WARNING, "Could not fully address message", ez1);
}
return null;
}
return theGatewayAddress;
}
/**
* {@inheritDoc}
*/
public Object transportControl(Object operation, Object value) {
if (!(operation instanceof Integer)) {
return null;
}
int op = (Integer) operation;
switch (op) {
case RouteControlOp: // Get a Router Control Object
return new RouteControl(this, localPeerId);
default:
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.warning("Invalid Transport Control operation argument");
}
return null;
}
}
/**
* Convert a Router EndpointAddress into a PeerID
*
* @param addr the address to extract peerAddress from
* @return the PeerID
*/
static PeerID addr2pid(EndpointAddress addr) {
URI asURI = null;
try {
asURI = new URI(ID.URIEncodingName, ID.URNNamespace + ":" + addr.getProtocolAddress(), null);
return (PeerID) IDFactory.fromURI(asURI);
} catch (URISyntaxException ex) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.log(Level.WARNING, "Error converting a source address into a virtual address : " + addr, ex);
}
} catch (ClassCastException cce) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.log(Level.WARNING, "Error converting a source address into a virtual address: " + addr, cce);
}
}
return null;
}
/**
* Convert an ID into a Router Endpoint Address
*
* @param pid The ID who's equivalent Endpoint Address is desired.
* @return The ID as an EndpointAddress.
*/
static EndpointAddress pid2addr(ID pid) {
return new EndpointAddress(ROUTER_PROTOCOL_NAME, pid.getUniqueValue().toString(), null, null);
}
/**
* check if it is a new route adv
*
* @param route route advertisement
*/
void updateRouteAdv(RouteAdvertisement route) {
updateRouteAdv(route, false);
}
/**
* check if it is a new route adv
*
* @param route route advertisement
* @param force enforce the route
*/
void updateRouteAdv(RouteAdvertisement route, boolean force) {
try {
PeerID pID = route.getDestPeerID();
// check if we updated the route
if (routeCM.updateRoute(route)) {
// We just dumped an adv for that dest, so we want to do a real check
// on its new addresses. Remove the entry from the negative cache.
synchronized (this) {
Long nextTry = triedAndFailed.get(pID);
if (nextTry != null) {
// only remove if we do not have a pending request (infinite retry)
// we take the conservative approach to avoid creating multiple
// async thread blocked on the same destination
if (nextTry <= TimeUtils.toAbsoluteTimeMillis(MAX_ASYNC_GETMESSENGER_RETRY)) {
triedAndFailed.remove(pID);
notifyAll();
}
}
}
} else {
if (Logging.SHOW_FINE && LOG.isLoggable(Level.FINE)) {
LOG.fine("Route for " + pID + " is same as existing route, not publishing it");
}
if (force) {
synchronized (this) {
Long nextTry = triedAndFailed.get(pID);
if (nextTry != null) {
// only remove if we do not have a pending request (infinite retry)
// we take the conservative approach to avoid creating multiple
// async thread blocked on the same destination
if (nextTry <= TimeUtils.toAbsoluteTimeMillis(MAX_ASYNC_GETMESSENGER_RETRY)) {
triedAndFailed.remove(pID);
notifyAll();
}
}
}
}
}
} catch (Exception e) {
if (Logging.SHOW_WARNING && LOG.isLoggable(Level.WARNING)) {
LOG.log(Level.WARNING, "Failed to publish route advertisement", e);
}
}
}
/**
* is there a pending route query for that destination
*
* @param peerID destination address
* @return true or false
*/
boolean isPendingRouteQuery(PeerID peerID) {
return pendingQueries.containsKey(peerID);
}
/**
* get a pending route query info
*
* @param peerID destination address
* @return pending route query info
*/
ClearPendingQuery getPendingRouteQuery(PeerID peerID) {
return pendingQueries.get(peerID);
}
/**
* Do we have a long route for that destination
*
* @param peerID destination address
* @return true or false
*/
boolean isRoutedRoute(PeerID peerID) {
return peerID != null && routedRoutes.containsKey(peerID);
}
/**
* Snoop if we have a messenger
*
* @param addr destination address
* @return Messenger
*/
Messenger getCachedMessenger(EndpointAddress addr) {
return destinations.getCurrentMessenger(addr);
}
/**
* Get all direct route destinations
*
* @return Iterator iterations of all endpoint destinations
*/
Iterator getAllCachedMessengerDestinations() {
return destinations.allDestinations().iterator();
}
/**
* Get all long route destinations
*
* @return Iterator iterations of all routed route destinations
*/
Iterator> getRoutedRouteAllDestinations() {
return routedRoutes.entrySet().iterator();
}
/**
* Get all long route destination addresses
*
* @return Iterator iterations of all routed route addresses
*/
Iterator getAllRoutedRouteAddresses() {
return routedRoutes.keySet().iterator();
}
/**
* Get all pendingRouteQuery destinations
*
* @return All pending route query destinations
*/
Collection> getPendingQueriesAllDestinations() {
List> copy = new ArrayList>(
pendingQueries.size());
synchronized (pendingQueries) {
copy.addAll(pendingQueries.entrySet());
}
return copy;
}
/**
* Get the route CM cache Manager
*
* @return the route CM cache Manager
*/
RouteCM getRouteCM() {
return routeCM;
}
/**
* Get the route resolver manager
*
* @return the route resolver Manager
*/
RouteResolver getRouteResolver() {
return routeResolver;
}
/**
* set bad route entry
*
* @param addr of the bad route
* @param badRoute bad route info
*/
synchronized void setBadRoute(EndpointAddress addr, BadRoute badRoute) {
badRoutes.put(addr, badRoute);
}
/**
* get bad route entry
*
* @param addr of the bad route
* @return BadRoute bad route info
*/
synchronized BadRoute getBadRoute(EndpointAddress addr) {
return badRoutes.get(addr);
}
}