net.openhft.hashing.Access Maven / Gradle / Ivy
/*
* Copyright 2014 Higher Frequency Trading http://www.higherfrequencytrading.com
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package net.openhft.hashing;
import java.nio.ByteBuffer;
import java.nio.ByteOrder;
import static java.nio.ByteOrder.BIG_ENDIAN;
import static java.nio.ByteOrder.LITTLE_ENDIAN;
/**
* Strategy of reading bytes, defines the abstraction of {@code T} class instances as ordered byte
* sequence. All {@code getXXX(input, offset)} should be consistent to each other in terms of
* ordered byte sequence each {@code T} instance represents. For example, if some {@code
* Access} implementation returns {@link ByteOrder#LITTLE_ENDIAN} on {@link #byteOrder(Object)
* byteOrder(input)} call, the following expressions should always have the same value:
*
* - {@code getLong(input, 0)}
* - {@code getUnsignedInt(input, 0) | (getUnsignedInt(input, 4) << 32)}
* {@code getUnsignedInt(input, 0) |
* ((long) getUnsignedShort(input, 4) << 32) |
* ((long) getUnsignedByte(input, 6) << 48) |
* ((long) getUnsignedByte(input, 7) << 56)}- And so on
*
*
* {@code getXXX(input, offset)} methods could throw unchecked exceptions when requested bytes
* range is outside of the bounds of the byte sequence, represented by the given {@code input}.
* However, they could omit checks for better performance.
*
*
Only {@link #getByte(Object, long)} and {@link #byteOrder(Object)} methods are abstract in
* this class, so implementing them is sufficient for valid {@code Access} instance, but for
* efficiency your should override methods used by target {@link LongHashFunction} implementation.
*
*
{@code Access} API is designed for inputs, that actually represent byte sequences that lay
* continuously in memory. Theoretically {@code Access} strategy could be implemented for
* non-continuous byte sequences, or abstractions which aren't actually present in memory as they
* are accessed, but this should be awkward, and hashing using such {@code Access} is expected to
* be slow.
*
* @param the type of the object to access
* @see LongHashFunction#hash(Object, Access, long, long)
*/
public abstract class Access {
/**
* Returns the {@code Access} delegating {@code getXXX(input, offset)} methods to {@code
* sun.misc.Unsafe.getXXX(input, offset)}.
*
* Usage example:
{@code
* class Pair {
* long first, second;
*
* static final long pairDataOffset =
* theUnsafe.objectFieldOffset(Pair.class.getDeclaredField("first"));
*
* static long hashPair(Pair pair, LongHashFunction hashFunction) {
* return hashFunction.hash(pair, Access.unsafe(), pairDataOffset, 16L);
* }
* }}
*
* {@code null} is a valid input, on accepting {@code null} {@code Unsafe} just interprets
* the given offset as a wild memory address. Note that for hashing memory by address there is
* a shortcut {@link LongHashFunction#hashMemory(long, long) hashMemory(address, len)} method.
*
* @param the type of objects to access
* @return the unsafe memory {@code Access}
*/
@SuppressWarnings("unchecked")
public static Access unsafe() {
return (Access) UnsafeAccess.INSTANCE;
}
/**
* Returns the {@code Access} to any {@link ByteBuffer}. This {@code Access} isn't useful in
* the user code, because methods {@link LongHashFunction#hashBytes(ByteBuffer)} and
* {@link LongHashFunction#hashBytes(ByteBuffer, int, int)} exist. This {@code Access} could be
* used in new {@link LongHashFunction} implementations.
*
* @return the {@code Access} to {@link ByteBuffer}s
*/
public static Access toByteBuffer() {
return ByteBufferAccess.INSTANCE;
}
/**
* Returns the {@code Access} to {@link CharSequence}s backed by {@linkplain
* ByteOrder#nativeOrder() native} {@code char} reads, typically from {@code char[]} array.
*
* Usage example:
{@code
* static long hashStringBuffer(StringBuffer buffer, LongHashFunction hashFunction) {
* return hashFunction.hash(buffer, Access.toNativeCharSequence(),
* // * 2L because length is passed in bytes, not chars
* 0L, buffer.length() * 2L);
* }}
*
* This method is a shortcut for {@code Access.toCharSequence(ByteOrder.nativeOrder())}.
*
* @param the {@code CharSequence} subtype (backed by native {@code char reads}) to access
* @return the {@code Access} to {@link CharSequence}s backed by native {@code char} reads
* @see #toCharSequence(ByteOrder)
*/
@SuppressWarnings("unchecked")
public static Access toNativeCharSequence() {
return (Access) CharSequenceAccess.nativeCharSequenceAccess();
}
/**
* Returns the {@code Access} to {@link CharSequence}s backed by {@code char} reads made in
* the specified byte order.
*
* Usage example:
{@code
* static long hashCharBuffer(CharBuffer buffer, LongHashFunction hashFunction) {
* return hashFunction.hash(buffer, Access.toCharSequence(buffer.order()),
* // * 2L because length is passed in bytes, not chars
* 0L, buffer.length() * 2L);
* }}
*
* @param backingOrder the byte order of {@code char} reads backing
* {@code CharSequences} to access
* @return the {@code Access} to {@link CharSequence}s backed by {@code char} reads made in
* the specified byte order
* @param the {@code CharSequence} subtype to access
* @see #toNativeCharSequence()
*/
@SuppressWarnings("unchecked")
public static Access toCharSequence(ByteOrder backingOrder) {
return (Access) CharSequenceAccess.charSequenceAccess(backingOrder);
}
/**
* Constructor for use in subclasses.
*/
protected Access() {}
/**
* Reads {@code [offset, offset + 7]} bytes of the byte sequence represented by the given
* {@code input} as a single {@code long} value.
*
* @param input the object to access
* @param offset offset to the first byte to read within the byte sequence represented
* by the given object
* @return eight bytes as a {@code long} value, in {@linkplain #byteOrder(Object) the expected
* order}
*/
public long getLong(T input, long offset) {
if (byteOrder(input) == LITTLE_ENDIAN) {
return getUnsignedInt(input, offset) | (getUnsignedInt(input, offset + 4L) << 32);
} else {
return getUnsignedInt(input, offset + 4L) | (getUnsignedInt(input, offset) << 32);
}
}
/**
* Shortcut for {@code getInt(input, offset) & 0xFFFFFFFFL}. Could be implemented more
* efficiently.
*
* @param input the object to access
* @param offset offset to the first byte to read within the byte sequence represented
* by the given object
* @return four bytes as an unsigned int value, in {@linkplain #byteOrder(Object) the expected
* order}
*/
public long getUnsignedInt(T input, long offset) {
return ((long) getInt(input, offset)) & 0xFFFFFFFFL;
}
/**
* Reads {@code [offset, offset + 3]} bytes of the byte sequence represented by the given
* {@code input} as a single {@code int} value.
*
* @param input the object to access
* @param offset offset to the first byte to read within the byte sequence represented
* by the given object
* @return four bytes as an {@code int} value, in {@linkplain #byteOrder(Object) the expected
* order}
*/
public int getInt(T input, long offset) {
if (byteOrder(input) == LITTLE_ENDIAN) {
return getUnsignedShort(input, offset) | (getUnsignedShort(input, offset + 2L) << 16);
} else {
return getUnsignedShort(input, offset + 2L) | (getUnsignedShort(input, offset) << 16);
}
}
/**
* Shortcut for {@code getShort(input, offset) & 0xFFFF}. Could be implemented more
* efficiently.
*
* @param input the object to access
* @param offset offset to the first byte to read within the byte sequence represented
* by the given object
* @return two bytes as an unsigned short value, in {@linkplain #byteOrder(Object) the expected
* order}
*/
public int getUnsignedShort(T input, long offset) {
if (byteOrder(input) == LITTLE_ENDIAN) {
return getUnsignedByte(input, offset) | (getUnsignedByte(input, offset + 1L) << 8);
} else {
return getUnsignedByte(input, offset + 1L) | (getUnsignedByte(input, offset) << 8);
}
}
/**
* Reads {@code [offset, offset + 1]} bytes of the byte sequence represented by the given
* {@code input} as a single {@code short} value, returned widened to {@code int}.
*
* @param input the object to access
* @param offset offset to the first byte to read within the byte sequence represented
* by the given object
* @return two bytes as a {@code short} value, in {@linkplain #byteOrder(Object) the expected
* order}, widened to {@code int}
*/
public int getShort(T input, long offset) {
return (int) (short) getUnsignedShort(input, offset);
}
/**
* Shortcut for {@code getByte(input, offset) & 0xFF}. Could be implemented more efficiently.
*
* @param input the object to access
* @param offset offset to the byte to read within the byte sequence represented
* by the given object
* @return a byte by the given {@code offset}, interpreted as unsigned
*/
public int getUnsignedByte(T input, long offset) {
return getByte(input, offset) & 0xFF;
}
/**
* Reads a single byte at the given {@code offset} in the byte sequence represented by the given
* {@code input}, returned widened to {@code int}.
*
* @param input the object to access
* @param offset offset to the byte to read within the byte sequence represented
* by the given object
* @return a byte by the given {@code offset}, widened to {@code int}
*/
public abstract int getByte(T input, long offset);
// short names
public long i64(final T input, final long offset) { return getLong(input, offset); }
public long u32(final T input, final long offset) { return getUnsignedInt(input, offset); }
public int i32(final T input, final long offset) { return getInt(input, offset); }
public int u16(final T input, final long offset) { return getUnsignedShort(input, offset); }
public int i16(final T input, final long offset) { return getShort(input, offset); }
public int u8(final T input, final long offset) { return getUnsignedByte(input, offset); }
public int i8(final T input, final long offset) { return getByte(input, offset); }
/**
* The byte order in which all multi-byte {@code getXXX()} reads from the given {@code input}
* are performed.
*
* @param input the accessed object
* @return the byte order of all multi-byte reads from the given {@code input}
*/
public abstract ByteOrder byteOrder(T input);
/**
* Get {@code this} or the reversed access object for reading the input as fixed
* byte order of {@code byteOrder}.
*
* @param input the accessed object
* @param byteOrder the byte order to be used for reading the {@code input}
* @return a {@code Access} object which will read the {@code input} with the
* byte order of {@code byteOrder}.
*/
public Access byteOrder(final T input, final ByteOrder byteOrder) {
return byteOrder(input) == byteOrder ? this : reverseAccess();
}
/**
* Get the {@code Access} object with a different byte order. This method should
* always return a fixed reference.
*/
protected abstract Access reverseAccess();
/**
* Get or create the reverse byte order {@code Access} object for {@code access}.
*/
static Access newDefaultReverseAccess(final Access access) {
return access instanceof ReverseAccess
? access.reverseAccess()
: new ReverseAccess(access);
}
/**
* The default reverse byte order delegating {@code Access} class.
*/
private static class ReverseAccess extends Access {
final Access access;
private ReverseAccess(final Access access) {
this.access = access;
}
@Override
public long getLong(final T input, final long offset) {
return Long.reverseBytes(access.getLong(input, offset));
}
@Override
public long getUnsignedInt(final T input, final long offset) {
return Long.reverseBytes(access.getUnsignedInt(input, offset)) >>> 32;
}
@Override
public int getInt(final T input, final long offset) {
return Integer.reverseBytes(access.getInt(input, offset));
}
@Override
public int getUnsignedShort(final T input, final long offset) {
return Integer.reverseBytes(access.getUnsignedShort(input, offset)) >>> 16;
}
@Override
public int getShort(final T input, final long offset) {
return Integer.reverseBytes(access.getShort(input, offset)) >> 16;
}
@Override
public int getUnsignedByte(final T input, final long offset) {
return access.getUnsignedByte(input, offset);
}
@Override
public int getByte(final T input, final long offset) {
return access.getByte(input, offset);
}
@Override
public ByteOrder byteOrder(final T input) {
return LITTLE_ENDIAN == access.byteOrder(input) ? BIG_ENDIAN : LITTLE_ENDIAN;
}
@Override
protected Access reverseAccess() {
return access;
}
}
}