javax.servlet.resources.javaee_web_services_client_1_3.xsd Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of ehcache Show documentation
Show all versions of ehcache Show documentation
Ehcache is an open source, standards-based cache used to boost performance,
offload the database and simplify scalability. Ehcache is robust, proven and full-featured and
this has made it the most widely-used Java-based cache.
$Id: javaee_web_services_client_1_3.xsd,v 1.1.2.1 2011/03/23 09:21:14 hmalphett Exp $
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
Copyright 2003-2009 Sun Microsystems, Inc. All rights reserved.
The contents of this file are subject to the terms of either the
GNU General Public License Version 2 only ("GPL") or the Common
Development and Distribution License("CDDL") (collectively, the
"License"). You may not use this file except in compliance with
the License. You can obtain a copy of the License at
https://glassfish.dev.java.net/public/CDDL+GPL.html or
glassfish/bootstrap/legal/LICENSE.txt. See the License for the
specific language governing permissions and limitations under the
License.
When distributing the software, include this License Header
Notice in each file and include the License file at
glassfish/bootstrap/legal/LICENSE.txt. Sun designates this
particular file as subject to the "Classpath" exception as
provided by Sun in the GPL Version 2 section of the License file
that accompanied this code. If applicable, add the following
below the License Header, with the fields enclosed by brackets []
replaced by your own identifying information:
"Portions Copyrighted [year] [name of copyright owner]"
Contributor(s):
If you wish your version of this file to be governed by only the
CDDL or only the GPL Version 2, indicate your decision by adding
"[Contributor] elects to include this software in this
distribution under the [CDDL or GPL Version 2] license." If you
don't indicate a single choice of license, a recipient has the
option to distribute your version of this file under either the
CDDL, the GPL Version 2 or to extend the choice of license to its
licensees as provided above. However, if you add GPL Version 2
code and therefore, elected the GPL Version 2 license, then the
option applies only if the new code is made subject to such
option by the copyright holder.
(C) Copyright International Business Machines Corporation 2002
The service-ref element declares a reference to a Web
service. It contains optional description, display name and
icons, a declaration of the required Service interface,
an optional WSDL document location, an optional set
of JAX-RPC mappings, an optional QName for the service element,
an optional set of Service Endpoint Interfaces to be resolved
by the container to a WSDL port, and an optional set of handlers.
The service-ref-name element declares logical name that the
components in the module use to look up the Web service. It
is recommended that all service reference names start with
"service/".
The service-interface element declares the fully qualified class
name of the JAX-RPC Service interface the client depends on.
In most cases the value will be javax.xml.rpc.Service. A JAX-RPC
generated Service Interface class may also be specified.
The service-ref-type element declares the type of the service-ref
element that is injected or returned when a JNDI lookup is done.
This must be either a fully qualified name of Service class or
the fully qualified name of service endpoint interface class.
This is only used with JAX-WS runtime where the corresponding
@WebServiceRef annotation can be used to denote both a Service
or a Port.
If this is not specified, then the type of service-ref element
that is injected or returned when a JNDI lookup is done is
always a Service interface/class.
The wsdl-file element contains the URI location of a WSDL
file. The location is relative to the root of the module.
The jaxrpc-mapping-file element contains the name of a file that
describes the JAX-RPC mapping between the Java interaces used by
the application and the WSDL description in the wsdl-file. The
file name is a relative path within the module file.
This is not required when JAX-WS based runtime is used.
The service-qname element declares the specific WSDL service
element that is being refered to. It is not specified if no
wsdl-file is declared.
The port-component-ref element declares a client dependency
on the container for resolving a Service Endpoint Interface
to a WSDL port. It optionally associates the Service Endpoint
Interface with a particular port-component. This is only used
by the container for a Service.getPort(Class) method call.
Declares the handler for a port-component. Handlers can
access the init-param name/value pairs using the
HandlerInfo interface. If port-name is not specified, the
handler is assumed to be associated with all ports of the
service.
To be used with JAX-RPC based runtime only.
To be used with JAX-WS based runtime only.
The port-component-ref element declares a client dependency
on the container for resolving a Service Endpoint Interface
to a WSDL port. It optionally associates the Service Endpoint
Interface with a particular port-component. This is only used
by the container for a Service.getPort(Class) method call.
The service-endpoint-interface element defines a fully qualified
Java class that represents the Service Endpoint Interface of a
WSDL port.
Used to enable or disable SOAP MTOM/XOP mechanism on the client
side for a port-component.
Not to be specified for JAX-RPC runtime
When MTOM is enabled, binary data above this size in bytes
should be XOP encoded or sent as attachment. Default value is 0.
Not to be specified for JAX-RPC runtime
This specifies the WS-Addressing requirements for a JAX-WS
web service. It corresponds to javax.xml.ws.soap.Addressing
annotation or its feature javax.xml.ws.soap.AddressingFeature.
See the addressingType for more information.
Not to be specified for JAX-RPC runtime
Corresponds to the javax.xml.ws.RespectBinding annotation
or its corresponding javax.xml.ws.RespectBindingFeature web
service feature. This is used to control whether a JAX-WS
implementation must respect/honor the contents of the
wsdl:binding in the WSDL that is associated with the service.
Not to be specified for JAX-RPC runtime
The port-component-link element links a port-component-ref
to a specific port-component required to be made available
by a service reference.
The value of a port-component-link must be the
port-component-name of a port-component in the same module
or another module in the same application unit. The syntax
for specification follows the syntax defined for ejb-link
in the EJB 2.0 specification.
The handler-chains element defines the handlerchains associated with this
service or service endpoint.
The handler-chain element defines the handlerchain.
Handlerchain can be defined such that the handlers in the
handlerchain operate,all ports of a service, on a specific
port or on a list of protocol-bindings. The choice of elements
service-name-pattern, port-name-pattern and protocol-bindings
are used to specify whether the handlers in handler-chain are
for a service, port or protocol binding. If none of these
choices are specified with the handler-chain element then the
handlers specified in the handler-chain will be applied on
everything.
Defines the type used for specifying a list of
protocol-bindingType(s). For e.g.
##SOAP11_HTTP ##SOAP12_HTTP ##XML_HTTP
Defines the type used for specifying the URI for the
protocol binding used by the port-component. For
portability one could use one of the following tokens that
alias the standard binding types:
##SOAP11_HTTP
##SOAP11_HTTP_MTOM
##SOAP12_HTTP
##SOAP12_HTTP_MTOM
##XML_HTTP
Other specifications could define tokens that start with ##
to alias new standard binding URIs that are introduced.
Defines the type that is used for specifying tokens that
start with ## which are used to alias existing standard
protocol bindings and support aliases for new standard
binding URIs that are introduced in future specifications.
The following tokens alias the standard protocol binding
URIs:
##SOAP11_HTTP = "http://schemas.xmlsoap.org/wsdl/soap/http"
##SOAP11_HTTP_MTOM =
"http://schemas.xmlsoap.org/wsdl/soap/http?mtom=true"
##SOAP12_HTTP = "http://www.w3.org/2003/05/soap/bindings/HTTP/"
##SOAP12_HTTP_MTOM =
"http://www.w3.org/2003/05/soap/bindings/HTTP/?mtom=true"
##XML_HTTP = "http://www.w3.org/2004/08/wsdl/http"
This is used to specify the QName pattern in the
attribute service-name-pattern and port-name-pattern in
the handler-chain element
For example, the various forms acceptable here for
service-name-pattern attribute in handler-chain element
are :
Exact Name: service-name-pattern="ns1:EchoService"
In this case, handlers specified in this
handler-chain element will apply to all ports with
this exact service name. The namespace prefix must
have been declared in a namespace declaration
attribute in either the start-tag of the element
where the prefix is used or in an an ancestor
element (i.e. an element in whose content the
prefixed markup occurs)
Pattern : service-name-pattern="ns1:EchoService*"
In this case, handlers specified in this
handler-chain element will apply to all ports whose
Service names are like EchoService1, EchoServiceFoo
etc. The namespace prefix must have been declared in
a namespace declaration attribute in either the
start-tag of the element where the prefix is used or
in an an ancestor element (i.e. an element in whose
content the prefixed markup occurs)
Wild Card : service-name-pattern="*"
In this case, handlers specified in this handler-chain
element will apply to ports of all service names.
The same can be applied to port-name attribute in
handler-chain element.
This specifies the WS-Addressing requirements for a JAX-WS web service.
It corresponds to javax.xml.ws.soap.Addressing annotation or its
feature javax.xml.ws.soap.AddressingFeature.
If the "enabled" element is "true", WS-Addressing is enabled.
It means that the endpoint supports WS-Addressing but does not require
its use. The default value for "enabled" is "true".
If the WS-Addressing is enabled and the "required" element is "true",
it means that the endpoint requires WS-Addressing. The default value
for "required" is "false".
If WS-Addressing is enabled, the "responses" element determines
if an endpoint requires the use of only anonymous responses,
or only non-anonymous responses, or all. The value of the "responses"
element must be one of the following:
ANONYMOUS
NON_ANONYMOUS
ALL
The default value for the "responses" is ALL.
If WS-Addressing is enabled, this type determines if an endpoint
requires the use of only anonymous responses, or only non-anonymous
responses, or all.
Corresponds to the javax.xml.ws.RespectBinding annotation
or its corresponding javax.xml.ws.RespectBindingFeature web
service feature. This is used to control whether a JAX-WS
implementation must respect/honor the contents of the
wsdl:binding in the WSDL that is associated with the service.
If the "enabled" element is "true", wsdl:binding in the
associated WSDL, if any, must be respected/honored.
Declares the handler for a port-component, service-ref. Handlers can
access the init-param name/value pairs using the HandlerInfo interface.
Used in: port-component, service-ref
Defines the name of the handler. The name must be unique within the
module.
Defines a fully qualified class name for the handler implementation.
Not to be specified for JAX-WS runtime
Defines the QName of a SOAP header that will be processed by the
handler.
Not to be specified for JAX-WS runtime
The soap-role element contains a SOAP actor definition that the
Handler will play as a role.
The port-name element defines the WSDL port-name that a
handler should be associated with. If port-name is not
specified, the handler is assumed to be associated with
all ports of the service.
Not to be specified for JAX-WS runtime
Defines the name of the handler. The name must be unique
within the module.