org.apache.activemq.jms.pool.PooledConnectionFactory Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of activemq-jms-pool Show documentation
Show all versions of activemq-jms-pool Show documentation
Generic JMS Pooled ConnectionFactory
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.activemq.jms.pool;
import java.util.NoSuchElementException;
import java.util.Properties;
import java.util.concurrent.atomic.AtomicBoolean;
import java.util.concurrent.atomic.AtomicReference;
import javax.jms.Connection;
import javax.jms.ConnectionFactory;
import javax.jms.JMSException;
import javax.jms.QueueConnection;
import javax.jms.QueueConnectionFactory;
import javax.jms.TopicConnection;
import javax.jms.TopicConnectionFactory;
import org.apache.commons.pool2.KeyedPooledObjectFactory;
import org.apache.commons.pool2.PooledObject;
import org.apache.commons.pool2.impl.DefaultPooledObject;
import org.apache.commons.pool2.impl.GenericKeyedObjectPool;
import org.apache.commons.pool2.impl.GenericKeyedObjectPoolConfig;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
/**
* A JMS provider which pools Connection, Session and MessageProducer instances
* so it can be used with tools like Camel and Spring's
* JmsTemplate and MessagListenerContainer.
* Connections, sessions and producers are returned to a pool after use so that they can be reused later
* without having to undergo the cost of creating them again.
*
* b>NOTE: while this implementation does allow the creation of a collection of active consumers,
* it does not 'pool' consumers. Pooling makes sense for connections, sessions and producers, which
* are expensive to create and can remain idle a minimal cost. Consumers, on the other hand, are usually
* just created at startup and left active, handling incoming messages as they come. When a consumer is
* complete, it is best to close it rather than return it to a pool for later reuse: this is because,
* even if a consumer is idle, ActiveMQ will keep delivering messages to the consumer's prefetch buffer,
* where they'll get held until the consumer is active again.
*
* If you are creating a collection of consumers (for example, for multi-threaded message consumption), you
* might want to consider using a lower prefetch value for each consumer (e.g. 10 or 20), to ensure that
* all messages don't end up going to just one of the consumers. See this FAQ entry for more detail:
* http://activemq.apache.org/i-do-not-receive-messages-in-my-second-consumer.html
*
* Optionally, one may configure the pool to examine and possibly evict objects as they sit idle in the
* pool. This is performed by an "idle object eviction" thread, which runs asynchronously. Caution should
* be used when configuring this optional feature. Eviction runs contend with client threads for access
* to objects in the pool, so if they run too frequently performance issues may result. The idle object
* eviction thread may be configured using the {@link org.apache.activemq.jms.pool.PooledConnectionFactory#setTimeBetweenExpirationCheckMillis} method. By
* default the value is -1 which means no eviction thread will be run. Set to a non-negative value to
* configure the idle eviction thread to run.
*/
public class PooledConnectionFactory implements ConnectionFactory, QueueConnectionFactory, TopicConnectionFactory {
private static final transient Logger LOG = LoggerFactory.getLogger(PooledConnectionFactory.class);
protected final AtomicBoolean stopped = new AtomicBoolean(false);
private GenericKeyedObjectPool connectionsPool;
protected Object connectionFactory;
private int maximumActiveSessionPerConnection = 500;
private int idleTimeout = 30 * 1000;
private int connectionTimeout = 30 * 1000;
private boolean blockIfSessionPoolIsFull = true;
private long blockIfSessionPoolIsFullTimeout = -1L;
private long expiryTimeout = 0l;
private boolean createConnectionOnStartup = true;
private boolean useAnonymousProducers = true;
private boolean reconnectOnException = true;
// Temporary value used to always fetch the result of makeObject.
private final AtomicReference mostRecentlyCreated = new AtomicReference(null);
public void initConnectionsPool() {
if (this.connectionsPool == null) {
final GenericKeyedObjectPoolConfig poolConfig = new GenericKeyedObjectPoolConfig();
poolConfig.setJmxEnabled(false);
this.connectionsPool = new GenericKeyedObjectPool(
new KeyedPooledObjectFactory() {
@Override
public PooledObject makeObject(ConnectionKey connectionKey) throws Exception {
Connection delegate = createConnection(connectionKey);
ConnectionPool connection = createConnectionPool(delegate);
connection.setIdleTimeout(getIdleTimeout());
connection.setExpiryTimeout(getExpiryTimeout());
connection.setMaximumActiveSessionPerConnection(getMaximumActiveSessionPerConnection());
connection.setBlockIfSessionPoolIsFull(isBlockIfSessionPoolIsFull());
if (isBlockIfSessionPoolIsFull() && getBlockIfSessionPoolIsFullTimeout() > 0) {
connection.setBlockIfSessionPoolIsFullTimeout(getBlockIfSessionPoolIsFullTimeout());
}
connection.setUseAnonymousProducers(isUseAnonymousProducers());
connection.setReconnectOnException(isReconnectOnException());
LOG.trace("Created new connection: {}", connection);
PooledConnectionFactory.this.mostRecentlyCreated.set(connection);
return new DefaultPooledObject(connection);
}
@Override
public void destroyObject(ConnectionKey connectionKey, PooledObject pooledObject) throws Exception {
ConnectionPool connection = pooledObject.getObject();
try {
LOG.trace("Destroying connection: {}", connection);
connection.close();
} catch (Exception e) {
LOG.warn("Close connection failed for connection: " + connection + ". This exception will be ignored.",e);
}
}
@Override
public boolean validateObject(ConnectionKey connectionKey, PooledObject pooledObject) {
ConnectionPool connection = pooledObject.getObject();
if (connection != null && connection.expiredCheck()) {
LOG.trace("Connection has expired: {} and will be destroyed", connection);
return false;
}
return true;
}
@Override
public void activateObject(ConnectionKey connectionKey, PooledObject pooledObject) throws Exception {
}
@Override
public void passivateObject(ConnectionKey connectionKey, PooledObject pooledObject) throws Exception {
}
}, poolConfig);
// Set max wait time to control borrow from pool.
this.connectionsPool.setMaxWaitMillis(getConnectionTimeout());
// Set max idle (not max active) since our connections always idle in the pool.
this.connectionsPool.setMaxIdlePerKey(1);
this.connectionsPool.setLifo(false);
// We always want our validate method to control when idle objects are evicted.
this.connectionsPool.setTestOnBorrow(true);
this.connectionsPool.setTestWhileIdle(true);
}
}
/**
* @return the currently configured ConnectionFactory used to create the pooled Connections.
*/
public Object getConnectionFactory() {
return connectionFactory;
}
/**
* Sets the ConnectionFactory used to create new pooled Connections.
*
* Updates to this value do not affect Connections that were previously created and placed
* into the pool. In order to allocate new Connections based off this new ConnectionFactory
* it is first necessary to {@link #clear} the pooled Connections.
*
* @param toUse
* The factory to use to create pooled Connections.
*/
public void setConnectionFactory(final Object toUse) {
if (toUse instanceof ConnectionFactory) {
this.connectionFactory = toUse;
} else {
throw new IllegalArgumentException("connectionFactory should implement javax.jms.ConnectionFactory");
}
}
@Override
public QueueConnection createQueueConnection() throws JMSException {
return (QueueConnection) createConnection();
}
@Override
public QueueConnection createQueueConnection(String userName, String password) throws JMSException {
return (QueueConnection) createConnection(userName, password);
}
@Override
public TopicConnection createTopicConnection() throws JMSException {
return (TopicConnection) createConnection();
}
@Override
public TopicConnection createTopicConnection(String userName, String password) throws JMSException {
return (TopicConnection) createConnection(userName, password);
}
@Override
public Connection createConnection() throws JMSException {
return createConnection(null, null);
}
@Override
public synchronized Connection createConnection(String userName, String password) throws JMSException {
if (stopped.get()) {
LOG.debug("PooledConnectionFactory is stopped, skip create new connection.");
return null;
}
ConnectionPool connection = null;
ConnectionKey key = new ConnectionKey(userName, password);
// This will either return an existing non-expired ConnectionPool or it
// will create a new one to meet the demand.
if (getConnectionsPool().getNumIdle(key) < getMaxConnections()) {
try {
connectionsPool.addObject(key);
connection = mostRecentlyCreated.getAndSet(null);
connection.incrementReferenceCount();
} catch (Exception e) {
throw createJmsException("Error while attempting to add new Connection to the pool", e);
}
} else {
try {
// We can race against other threads returning the connection when there is an
// expiration or idle timeout. We keep pulling out ConnectionPool instances until
// we win and get a non-closed instance and then increment the reference count
// under lock to prevent another thread from triggering an expiration check and
// pulling the rug out from under us.
while (connection == null) {
try {
connection = connectionsPool.borrowObject(key);
} catch (NoSuchElementException ex) {
if (!"Timeout waiting for idle object".equals(ex.getMessage())) {
throw ex;
}
}
if (connection != null) {
synchronized (connection) {
if (connection.getConnection() != null) {
connection.incrementReferenceCount();
break;
}
// Return the bad one to the pool and let if get destroyed as normal.
connectionsPool.returnObject(key, connection);
connection = null;
}
}
}
} catch (Exception e) {
throw createJmsException("Error while attempting to retrieve a connection from the pool", e);
}
try {
connectionsPool.returnObject(key, connection);
} catch (Exception e) {
throw createJmsException("Error when returning connection to the pool", e);
}
}
return newPooledConnection(connection);
}
protected Connection newPooledConnection(ConnectionPool connection) {
return new PooledConnection(connection);
}
private JMSException createJmsException(String msg, Exception cause) {
JMSException exception = new JMSException(msg);
exception.setLinkedException(cause);
exception.initCause(cause);
return exception;
}
protected Connection createConnection(ConnectionKey key) throws JMSException {
if (connectionFactory instanceof ConnectionFactory) {
if (key.getUserName() == null && key.getPassword() == null) {
return ((ConnectionFactory) connectionFactory).createConnection();
} else {
return ((ConnectionFactory) connectionFactory).createConnection(key.getUserName(), key.getPassword());
}
} else {
throw new IllegalStateException("connectionFactory should implement javax.jms.ConnectionFactory");
}
}
public void start() {
LOG.debug("Staring the PooledConnectionFactory: create on start = {}", isCreateConnectionOnStartup());
stopped.set(false);
if (isCreateConnectionOnStartup()) {
try {
// warm the pool by creating a connection during startup
createConnection().close();
} catch (JMSException e) {
LOG.warn("Create pooled connection during start failed. This exception will be ignored.", e);
}
}
}
public void stop() {
if (stopped.compareAndSet(false, true)) {
LOG.debug("Stopping the PooledConnectionFactory, number of connections in cache: {}",
connectionsPool != null ? connectionsPool.getNumActive() : 0);
try {
if (connectionsPool != null) {
connectionsPool.close();
connectionsPool = null;
}
} catch (Exception e) {
}
}
}
/**
* Clears all connections from the pool. Each connection that is currently in the pool is
* closed and removed from the pool. A new connection will be created on the next call to
* {@link #createConnection}. Care should be taken when using this method as Connections that
* are in use be client's will be closed.
*/
public void clear() {
if (stopped.get()) {
return;
}
getConnectionsPool().clear();
}
/**
* Returns the currently configured maximum number of sessions a pooled Connection will
* create before it either blocks or throws an exception when a new session is requested,
* depending on configuration.
*
* @return the number of session instances that can be taken from a pooled connection.
*/
public int getMaximumActiveSessionPerConnection() {
return maximumActiveSessionPerConnection;
}
/**
* Sets the maximum number of active sessions per connection
*
* @param maximumActiveSessionPerConnection
* The maximum number of active session per connection in the pool.
*/
public void setMaximumActiveSessionPerConnection(int maximumActiveSessionPerConnection) {
this.maximumActiveSessionPerConnection = maximumActiveSessionPerConnection;
}
/**
* Controls the behavior of the internal session pool. By default the call to
* Connection.getSession() will block if the session pool is full. If the
* argument false is given, it will change the default behavior and instead the
* call to getSession() will throw a JMSException.
*
* The size of the session pool is controlled by the @see #maximumActive
* property.
*
* @param block - if true, the call to getSession() blocks if the pool is full
* until a session object is available. defaults to true.
*/
public void setBlockIfSessionPoolIsFull(boolean block) {
this.blockIfSessionPoolIsFull = block;
}
/**
* Returns whether a pooled Connection will enter a blocked state or will throw an Exception
* once the maximum number of sessions has been borrowed from the the Session Pool.
*
* @return true if the pooled Connection createSession method will block when the limit is hit.
* @see #setBlockIfSessionPoolIsFull(boolean)
*/
public boolean isBlockIfSessionPoolIsFull() {
return this.blockIfSessionPoolIsFull;
}
/**
* Returns the maximum number to pooled Connections that this factory will allow before it
* begins to return connections from the pool on calls to ({@link #createConnection}.
*
* @return the maxConnections that will be created for this pool.
*/
public int getMaxConnections() {
return getConnectionsPool().getMaxIdlePerKey();
}
/**
* Sets the maximum number of pooled Connections (defaults to one). Each call to
* {@link #createConnection} will result in a new Connection being create up to the max
* connections value.
*
* @param maxConnections the maxConnections to set
*/
public void setMaxConnections(int maxConnections) {
getConnectionsPool().setMaxIdlePerKey(maxConnections);
getConnectionsPool().setMaxTotalPerKey(maxConnections);
}
/**
* Gets the Idle timeout value applied to new Connection's that are created by this pool.
*
* The idle timeout is used determine if a Connection instance has sat to long in the pool unused
* and if so is closed and removed from the pool. The default value is 30 seconds.
*
* @return idle timeout value (milliseconds)
*/
public int getIdleTimeout() {
return idleTimeout;
}
/**
* Sets the idle timeout value for Connection's that are created by this pool in Milliseconds,
* defaults to 30 seconds.
*
* For a Connection that is in the pool but has no current users the idle timeout determines how
* long the Connection can live before it is eligible for removal from the pool. Normally the
* connections are tested when an attempt to check one out occurs so a Connection instance can sit
* in the pool much longer than its idle timeout if connections are used infrequently.
*
* @param idleTimeout
* The maximum time a pooled Connection can sit unused before it is eligible for removal.
*/
public void setIdleTimeout(int idleTimeout) {
this.idleTimeout = idleTimeout;
}
/**
* Gets the connection timeout value. The maximum time waited to get a Connection from the pool.
* The default value is 30 seconds.
*
* @return connection timeout value (milliseconds)
*/
public int getConnectionTimeout() {
return connectionTimeout;
}
/**
* Sets the connection timeout value for getting Connections from this pool in Milliseconds,
* defaults to 30 seconds.
*
* @param connectionTimeout
* The maximum time to wait for getting a pooled Connection.
*/
public void setConnectionTimeout(int connectionTimeout) {
this.connectionTimeout = connectionTimeout;
}
/**
* allow connections to expire, irrespective of load or idle time. This is useful with failover
* to force a reconnect from the pool, to reestablish load balancing or use of the master post recovery
*
* @param expiryTimeout non zero in milliseconds
*/
public void setExpiryTimeout(long expiryTimeout) {
this.expiryTimeout = expiryTimeout;
}
/**
* @return the configured expiration timeout for connections in the pool.
*/
public long getExpiryTimeout() {
return expiryTimeout;
}
/**
* @return true if a Connection is created immediately on a call to {@link start}.
*/
public boolean isCreateConnectionOnStartup() {
return createConnectionOnStartup;
}
/**
* Whether to create a connection on starting this {@link PooledConnectionFactory}.
*
* This can be used to warm-up the pool on startup. Notice that any kind of exception
* happens during startup is logged at WARN level and ignored.
*
* @param createConnectionOnStartup true to create a connection on startup
*/
public void setCreateConnectionOnStartup(boolean createConnectionOnStartup) {
this.createConnectionOnStartup = createConnectionOnStartup;
}
/**
* Should Sessions use one anonymous producer for all producer requests or should a new
* MessageProducer be created for each request to create a producer object, default is true.
*
* When enabled the session only needs to allocate one MessageProducer for all requests and
* the MessageProducer#send(destination, message) method can be used. Normally this is the
* right thing to do however it does result in the Broker not showing the producers per
* destination.
*
* @return true if a PooledSession will use only a single anonymous message producer instance.
*/
public boolean isUseAnonymousProducers() {
return this.useAnonymousProducers;
}
/**
* Sets whether a PooledSession uses only one anonymous MessageProducer instance or creates
* a new MessageProducer for each call the create a MessageProducer.
*
* @param value
* Boolean value that configures whether anonymous producers are used.
*/
public void setUseAnonymousProducers(boolean value) {
this.useAnonymousProducers = value;
}
/**
* Gets the Pool of ConnectionPool instances which are keyed by different ConnectionKeys.
*
* @return this factories pool of ConnectionPool instances.
*/
protected GenericKeyedObjectPool getConnectionsPool() {
initConnectionsPool();
return this.connectionsPool;
}
/**
* Sets the number of milliseconds to sleep between runs of the idle Connection eviction thread.
* When non-positive, no idle object eviction thread will be run, and Connections will only be
* checked on borrow to determine if they have sat idle for too long or have failed for some
* other reason.
*
* By default this value is set to -1 and no expiration thread ever runs.
*
* @param timeBetweenExpirationCheckMillis
* The time to wait between runs of the idle Connection eviction thread.
*/
public void setTimeBetweenExpirationCheckMillis(long timeBetweenExpirationCheckMillis) {
getConnectionsPool().setTimeBetweenEvictionRunsMillis(timeBetweenExpirationCheckMillis);
}
/**
* @return the number of milliseconds to sleep between runs of the idle connection eviction thread.
*/
public long getTimeBetweenExpirationCheckMillis() {
return getConnectionsPool().getTimeBetweenEvictionRunsMillis();
}
/**
* @return the number of Connections currently in the Pool
*/
public int getNumConnections() {
return getConnectionsPool().getNumIdle();
}
/**
* Delegate that creates each instance of an ConnectionPool object. Subclasses can override
* this method to customize the type of connection pool returned.
*
* @param connection
*
* @return instance of a new ConnectionPool.
*/
protected ConnectionPool createConnectionPool(Connection connection) {
return new ConnectionPool(connection);
}
/**
* Returns the timeout to use for blocking creating new sessions
*
* @return true if the pooled Connection createSession method will block when the limit is hit.
* @see #setBlockIfSessionPoolIsFull(boolean)
*/
public long getBlockIfSessionPoolIsFullTimeout() {
return blockIfSessionPoolIsFullTimeout;
}
/**
* Controls the behavior of the internal session pool. By default the call to
* Connection.getSession() will block if the session pool is full. This setting
* will affect how long it blocks and throws an exception after the timeout.
*
* The size of the session pool is controlled by the @see #maximumActive
* property.
*
* Whether or not the call to create session blocks is controlled by the @see #blockIfSessionPoolIsFull
* property
*
* @param blockIfSessionPoolIsFullTimeout - if blockIfSessionPoolIsFullTimeout is true,
* then use this setting to configure how long to block before retry
*/
public void setBlockIfSessionPoolIsFullTimeout(long blockIfSessionPoolIsFullTimeout) {
this.blockIfSessionPoolIsFullTimeout = blockIfSessionPoolIsFullTimeout;
}
/**
* @return true if the underlying connection will be renewed on JMSException, false otherwise
*/
public boolean isReconnectOnException() {
return reconnectOnException;
}
/**
* Controls weather the underlying connection should be reset (and renewed) on JMSException
*
* @param reconnectOnException
* Boolean value that configures whether reconnect on exception should happen
*/
public void setReconnectOnException(boolean reconnectOnException) {
this.reconnectOnException = reconnectOnException;
}
/**
* Called by any superclass that implements a JNDIReferencable or similar that needs to collect
* the properties of this class for storage etc.
*
* This method should be updated any time there is a new property added.
*
* @param props
* a properties object that should be filled in with this objects property values.
*/
protected void populateProperties(Properties props) {
props.setProperty("maximumActiveSessionPerConnection", Integer.toString(getMaximumActiveSessionPerConnection()));
props.setProperty("maxConnections", Integer.toString(getMaxConnections()));
props.setProperty("idleTimeout", Integer.toString(getIdleTimeout()));
props.setProperty("expiryTimeout", Long.toString(getExpiryTimeout()));
props.setProperty("timeBetweenExpirationCheckMillis", Long.toString(getTimeBetweenExpirationCheckMillis()));
props.setProperty("createConnectionOnStartup", Boolean.toString(isCreateConnectionOnStartup()));
props.setProperty("useAnonymousProducers", Boolean.toString(isUseAnonymousProducers()));
props.setProperty("blockIfSessionPoolIsFullTimeout", Long.toString(getBlockIfSessionPoolIsFullTimeout()));
props.setProperty("reconnectOnException", Boolean.toString(isReconnectOnException()));
}
}
© 2015 - 2024 Weber Informatics LLC | Privacy Policy