org.apache.camel.spring.boot.CamelConfigurationProperties Maven / Gradle / Ivy
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.camel.spring.boot;
import org.apache.camel.LoggingLevel;
import org.apache.camel.ManagementStatisticsLevel;
import org.apache.camel.StartupSummaryLevel;
import org.apache.camel.main.DefaultConfigurationProperties;
import org.apache.camel.spi.Metadata;
import org.springframework.boot.context.properties.ConfigurationProperties;
import java.util.Map;
@ConfigurationProperties(prefix = "camel.springboot")
public class CamelConfigurationProperties extends DefaultConfigurationProperties {
// Spring Boot only Properties
// ---------------------------
/**
* Whether to use the main run controller to ensure the Spring-Boot application
* keeps running until being stopped or the JVM terminated.
* You typically only need this if you run Spring-Boot standalone.
* If you run Spring-Boot with spring-boot-starter-web then the web container keeps the JVM running.
*/
private boolean mainRunController;
/**
* Whether to include non-singleton beans (prototypes) when scanning for RouteBuilder instances.
* By default only singleton beans is included in the context scan.
*/
private boolean includeNonSingletons;
/**
* Whether to log a WARN if Camel on Spring Boot was immediately shutdown after starting which
* very likely is because there is no JVM thread to keep the application running.
*/
private boolean warnOnEarlyShutdown = true;
// Default Properties via camel-main
// ---------------------------------
// IMPORTANT: Must include the options from DefaultConfigurationProperties as spring boot apt compiler
// needs to grab the documentation from the javadoc on the field.
/**
* Sets the name of the CamelContext.
*/
private String name;
/**
* Controls the level of information logged during startup (and shutdown) of CamelContext.
*/
private StartupSummaryLevel startupSummaryLevel = StartupSummaryLevel.Default;
/**
* Timeout in seconds to graceful shutdown Camel.
*/
private int shutdownTimeout = 300;
/**
* Whether Camel should try to suppress logging during shutdown and timeout was triggered,
* meaning forced shutdown is happening. And during forced shutdown we want to avoid logging
* errors/warnings et all in the logs as a side-effect of the forced timeout.
* Notice the suppress is a best effort as there may still be some logs coming
* from 3rd party libraries and whatnot, which Camel cannot control.
* This option is default false.
*/
private boolean shutdownSuppressLoggingOnTimeout;
/**
* Sets whether to force shutdown of all consumers when a timeout occurred and thus
* not all consumers was shutdown within that period.
*
* You should have good reasons to set this option to false as it means that the routes
* keep running and is halted abruptly when CamelContext has been shutdown.
*/
private boolean shutdownNowOnTimeout = true;
/**
* Sets whether routes should be shutdown in reverse or the same order as they where started.
*/
private boolean shutdownRoutesInReverseOrder = true;
/**
* Sets whether to log information about the inflight Exchanges which are still running
* during a shutdown which didn't complete without the given timeout.
*
* This requires to enable the option inflightRepositoryExchangeEnabled.
*/
private boolean shutdownLogInflightExchangesOnTimeout = true;
/**
* UUID generator to use.
*
* default (32 bytes), short (16 bytes), classic (32 bytes or longer), simple (long incrementing counter), off
* (turned off for exchanges - only intended for performance profiling)
*/
private String uuidGenerator = "default";
/**
* Enable JMX in your Camel application.
*/
private boolean jmxEnabled = true;
/**
* Producer template endpoints cache size.
*/
private int producerTemplateCacheSize = 1000;
/**
* Consumer template endpoints cache size.
*/
private int consumerTemplateCacheSize = 1000;
/**
* Whether to load custom type converters by scanning classpath.
* This is used for backwards compatibility with Camel 2.x.
* Its recommended to migrate to use fast type converter loading
* by setting @Converter(generateLoader = true) on your custom
* type converter classes.
*/
private boolean loadTypeConverters = true;
/**
* Whether to load custom health checks by scanning classpath.
*/
private boolean loadHealthChecks;
/**
* Directory to load additional configuration files that contains
* configuration values that takes precedence over any other configuration.
* This can be used to refer to files that may have secret configuration that
* has been mounted on the file system for containers.
*
* You must use either file: or classpath: as prefix to load
* from file system or classpath. Then you can specify a pattern to load
* from sub directories and a name pattern such as file:/var/app/secret/*.properties
*/
private String fileConfigurations;
/**
* Used for filtering routes matching the given pattern, which follows the following rules:
*
* - Match by route id
* - Match by route input endpoint uri
*
* The matching is using exact match, by wildcard and regular expression.
*
* For example to only include routes which starts with foo in their route id's, use: include=foo*
* And to exclude routes which starts from JMS endpoints, use: exclude=jms:*
*
* Multiple patterns can be separated by comma, for example to exclude both foo and bar routes, use: exclude=foo*,bar*
*
* Exclude takes precedence over include.
*/
private String routeFilterIncludePattern;
/**
* Used for filtering routes matching the given pattern, which follows the following rules:
*
* - Match by route id
* - Match by route input endpoint uri
*
* The matching is using exact match, by wildcard and regular expression.
*
* For example to only include routes which starts with foo in their route id's, use: include=foo*
* And to exclude routes which starts from JMS endpoints, use: exclude=jms:*
*
* Multiple patterns can be separated by comma, for example to exclude both foo and bar routes, use: exclude=foo*,bar*
*
* Exclude takes precedence over include.
*/
private String routeFilterExcludePattern;
/**
* Used for enabling automatic routes reloading. If enabled then Camel will watch for file changes in the given
* reload directory, and trigger reloading routes if files are changed.
*/
private boolean routesReloadEnabled;
/**
* Directory to scan (incl subdirectories) for route changes. Camel cannot scan the classpath, so this must be
* configured to a file directory. Development with Maven as build tool, you can configure the directory to be
* src/main/resources to scan for Camel routes in XML or YAML files.
*/
private String routesReloadDirectory = "src/main/resources";
/**
* Whether the directory to scan should include sub directories.
*
* Depending on the number of sub directories, then this can cause the JVM to startup slower as Camel uses the JDK
* file-watch service to scan for file changes.
*/
private boolean routesReloadDirectoryRecursive;
/**
* Used for inclusive filtering of routes from directories.
*
* Typical used for specifying to accept routes in XML or YAML files.
* Multiple patterns can be specified separated by comma.
*/
private String routesReloadPattern = "camel/*";
/**
* When reloading routes should all existing routes be stopped and removed.
*
* By default, Camel will stop and remove all existing routes before reloading routes. This ensures that only the
* reloaded routes will be active. If disabled then only routes with the same route id is updated, and any existing
* routes are continued to run.
*/
private boolean routesReloadRemoveAllRoutes = true;
/**
* Whether to restart max duration when routes are reloaded. For example if max duration is 60 seconds, and a route
* is reloaded after 25 seconds, then this will restart the count and wait 60 seconds again.
*/
private boolean routesReloadRestartDuration = true;
/**
* To specify for how long time in seconds to keep running the JVM before automatic terminating the JVM.
* You can use this to run Spring Boot for a short while.
*/
private int durationMaxSeconds;
/**
* To specify for how long time in seconds Camel can be idle before automatic terminating the JVM.
* You can use this to run Spring Boot for a short while.
*/
private int durationMaxIdleSeconds;
/**
* To specify how many messages to process by Camel before automatic terminating the JVM.
* You can use this to run Spring Boot for a short while.
*/
private int durationMaxMessages;
/**
* Controls whether the Camel application should shutdown the JVM, or stop all routes, when duration max is
* triggered.
*/
private String durationMaxAction = "shutdown";
/**
* Is used to limit the maximum length of the logging Camel message bodies. If the message body
* is longer than the limit, the log message is clipped. Use -1 to have unlimited length.
* Use for example 1000 to log at most 1000 characters.
*/
private int logDebugMaxChars;
/**
* Sets whether stream caching is enabled or not.
*
* Default is false.
*/
private boolean streamCachingEnabled;
/**
* Sets the stream caching spool (temporary) directory to use for overflow and spooling to disk.
*
* If no spool directory has been explicit configured, then a temporary directory
* is created in the java.io.tmpdir directory.
*/
private String streamCachingSpoolDirectory;
/**
* Sets a stream caching cipher name to use when spooling to disk to write with encryption.
* By default the data is not encrypted.
*/
private String streamCachingSpoolCipher;
/**
* Stream caching threshold in bytes when overflow to disk is activated.
* The default threshold is 128kb.
* Use -1 to disable overflow to disk.
*/
private long streamCachingSpoolThreshold;
/**
* Sets a percentage (1-99) of used heap memory threshold to activate stream caching spooling to disk.
*/
private int streamCachingSpoolUsedHeapMemoryThreshold;
/**
* Sets what the upper bounds should be when streamCachingSpoolUsedHeapMemoryThreshold is in use.
*/
private String streamCachingSpoolUsedHeapMemoryLimit;
/**
* Sets whether if just any of the org.apache.camel.spi.StreamCachingStrategy.SpoolRule rules
* returns true then shouldSpoolCache(long) returns true, to allow spooling to disk.
* If this option is false, then all the org.apache.camel.spi.StreamCachingStrategy.SpoolRule must
* return true.
*
* The default value is false which means that all the rules must return true.
*/
private boolean streamCachingAnySpoolRules;
/**
* Sets the stream caching buffer size to use when allocating in-memory buffers used for in-memory stream caches.
*
* The default size is 4096.
*/
private int streamCachingBufferSize;
/**
* Whether to remove stream caching temporary directory when stopping.
* This option is default true.
*/
private boolean streamCachingRemoveSpoolDirectoryWhenStopping = true;
/**
* Sets whether stream caching statistics is enabled.
*/
private boolean streamCachingStatisticsEnabled;
/**
* Sets whether backlog tracing is enabled or not.
*
* Default is false.
*/
private boolean backlogTracing;
/**
* Sets whether tracing is enabled or not.
*
* Default is false.
*/
private boolean tracing;
/**
* Tracing pattern to match which node EIPs to trace.
* For example to match all To EIP nodes, use to*.
* The pattern matches by node and route id's
* Multiple patterns can be separated by comma.
*/
private String tracingPattern;
/**
* Sets whether message history is enabled or not.
*
* Default is true.
*/
private boolean messageHistory = true;
/**
* Sets whether log mask is enabled or not.
*
* Default is false.
*/
private boolean logMask;
/**
* Sets whether to log exhausted message body with message history.
*
* Default is false.
*/
private boolean logExhaustedMessageBody;
/**
* Sets whether the object should automatically start when Camel starts.
* Important: Currently only routes can be disabled, as CamelContext's are always started.
* Note: When setting auto startup false on CamelContext then that takes precedence
* and no routes is started. You would need to start CamelContext explicit using
* the org.apache.camel.CamelContext.start() method, to start the context, and then
* you would need to start the routes manually using Camelcontext.getRouteController().startRoute(String).
*
* Default is true to always start up.
*/
private boolean autoStartup = true;
/**
* Sets whether to allow access to the original message from Camel's error handler,
* or from org.apache.camel.spi.UnitOfWork.getOriginalInMessage().
* Turning this off can optimize performance, as defensive copy of the original message is not needed.
*
* Default is false.
*/
private boolean allowUseOriginalMessage;
/**
* Whether to use case sensitive or insensitive headers.
*
* Important: When using case sensitive (this is set to false).
* Then the map is case sensitive which means headers such as content-type and Content-Type are
* two different keys which can be a problem for some protocols such as HTTP based, which rely on case insensitive headers.
* However case sensitive implementations can yield faster performance. Therefore use case sensitive implementation with care.
*
* Default is true.
*/
private boolean caseInsensitiveHeaders = true;
/**
* Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as
* autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets
* configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection
* factories, AWS Clients, etc.
*
* Default is true.
*/
private boolean autowiredEnabled = true;
/**
* Sets whether the inflight repository should allow browsing each inflight exchange.
*
* This is by default disabled as there is a very slight performance overhead when enabled.
*/
private boolean inflightRepositoryBrowseEnabled;
/**
* Sets whether endpoint runtime statistics is enabled (gathers runtime usage of each incoming and outgoing endpoints).
*
* The default value is false.
*/
private boolean endpointRuntimeStatisticsEnabled;
/**
* Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while
* the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and
* handled by the routing Error Handler.
*
* By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions,
* that will be logged at WARN/ERROR level and ignored.
*
* The default value is false.
*/
public boolean endpointBridgeErrorHandler;
/**
* Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities.
*
* The default value is false.
*/
public boolean endpointBasicPropertyBinding;
/**
* Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup
* in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then
* the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed
* then creating and starting the producer may take a little time and prolong the total processing time of the processing.
*
* The default value is false.
*/
private boolean endpointLazyStartProducer;
/**
* Whether to enable using data type on Camel messages.
*
* Data type are automatic turned on if one or more routes has been explicit configured with input and output types.
* Otherwise data type is default off.
*/
private boolean useDataType;
/**
* Set whether breadcrumb is enabled.
* The default value is false.
*/
private boolean useBreadcrumb;
/**
* Can be used to turn off bean post processing.
*
* Be careful to turn this off, as this means that beans that use Camel annotations such as
* org.apache.camel.EndpointInject, org.apache.camel.ProducerTemplate,
* org.apache.camel.Produce, org.apache.camel.Consume etc will not be injected and in use.
*
* Turning this off should only be done if you are sure you do not use any of these Camel features.
*
* Not all runtimes allow turning this off (such as camel-blueprint or camel-cdi with XML).
*
* The default value is true (enabled).
*/
private boolean beanPostProcessorEnabled = true;
/**
* Whether its allowed to add new routes after Camel has been started.
* This is enabled by default.
* Setting this to false allows Camel to do some internal optimizations to reduce memory footprint.
*
* This should only be done on a JVM with a single Camel application (microservice like camel-main, camel-quarkus, camel-spring-boot).
* As this affects the entire JVM where Camel JARs are on the classpath.
*/
private boolean allowAddingNewRoutes = true;
/**
* Sets the JMX statistics level
* The level can be set to Extended to gather additional information
*
* The default value is Default.
*/
private ManagementStatisticsLevel jmxManagementStatisticsLevel = ManagementStatisticsLevel.Default;
/**
* The naming pattern for creating the CamelContext JMX management name.
*
* The default pattern is #name#
*/
private String jmxManagementNamePattern = "#name#";
/**
* If dumping is enabled then Camel will during startup dump all loaded routes (incl rests and route templates)
* represented as XML DSL into the log. This is intended for trouble shooting or to assist during development.
*
* Sensitive information that may be configured in the route endpoints could potentially be included in the dump
* output and is therefore not recommended to be used for production usage.
*
* This requires to have camel-xml-jaxb on the classpath to be able to dump the routes as XML.
*/
private boolean dumpRoutes;
/**
* Sets global options that can be referenced in the camel context
*
* Important: This has nothing to do with property placeholders, and is just a plain set of key/value pairs
* which are used to configure global options on CamelContext, such as a maximum debug logging length etc.
*/
private Map globalOptions;
/**
* To turn on MDC logging
*/
private boolean useMdcLogging;
/**
* Sets the pattern used for determining which custom MDC keys to propagate during message routing when
* the routing engine continues routing asynchronously for the given message. Setting this pattern to * will
* propagate all custom keys. Or setting the pattern to foo*,bar* will propagate any keys starting with
* either foo or bar.
* Notice that a set of standard Camel MDC keys are always propagated which starts with camel. as key name.
*
* The match rules are applied in this order (case insensitive):
*
* 1. exact match, returns true
* 2. wildcard match (pattern ends with a * and the name starts with the pattern), returns true
* 3. regular expression match, returns true
* 4. otherwise returns false
*/
private String mdcLoggingKeysPattern;
/**
* Sets the thread name pattern used for creating the full thread name.
*
* The default pattern is: Camel (#camelId#) thread ##counter# - #name#
*
* Where #camelId# is the name of the CamelContext.
* and #counter# is a unique incrementing counter.
* and #name# is the regular thread name.
*
* You can also use #longName# which is the long thread name which can includes endpoint parameters etc.
*/
private String threadNamePattern;
/**
* Sets whether bean introspection uses extended statistics.
* The default is false.
*/
private boolean beanIntrospectionExtendedStatistics;
/**
* Sets the logging level used by bean introspection, logging activity of its usage.
* The default is TRACE.
*/
private LoggingLevel beanIntrospectionLoggingLevel;
/**
* Whether the routes collector is enabled or not.
*
* When enabled Camel will auto-discover routes (RouteBuilder instances from the registry and also load additional
* routes from the file system).
*
* The routes collector is default enabled.
*/
private boolean routesCollectorEnabled = true;
/**
* Used for inclusive filtering of routes from directories. The exclusive filtering takes precedence over inclusive
* filtering. The pattern is using Ant-path style pattern.
*
* Multiple patterns can be specified separated by comma, as example, to include all the routes from a directory
* whose name contains foo use: **/*foo*.
*/
private String routesIncludePattern = "classpath:camel/*,classpath:camel-template/*,classpath:camel-rest/*";
/**
* Used for exclusive filtering of routes from directories. The exclusive filtering takes precedence over inclusive
* filtering. The pattern is using Ant-path style pattern.
*
* Multiple patterns can be specified separated by comma, as example, to exclude all the routes from a directory
* whose name contains foo use: **/*foo*.
*/
private String routesExcludePattern;
/**
* Used for inclusive filtering RouteBuilder classes which are collected from the registry or via classpath
* scanning. The exclusive filtering takes precedence over inclusive filtering. The pattern is using Ant-path style
* pattern. Multiple patterns can be specified separated by comma.
*
* Multiple patterns can be specified separated by comma. For example to include all classes starting with Foo use:
* **/Foo* To include all routes form a specific package use: com/mycompany/foo/* To include all routes
* form a specific package and its sub-packages use double wildcards: com/mycompany/foo/** And to include
* all routes from two specific packages use: com/mycompany/foo/*,com/mycompany/stuff/*
*/
private String javaRoutesIncludePattern;
/**
* Used for exclusive filtering RouteBuilder classes which are collected from the registry or via classpath
* scanning. The exclusive filtering takes precedence over inclusive filtering. The pattern is using Ant-path style
* pattern. Multiple patterns can be specified separated by comma.
*
* For example to exclude all classes starting with Bar use: **/Bar* To exclude all routes form a
* specific package use: com/mycompany/bar/* To exclude all routes form a specific package and its sub-packages
* use double wildcards: com/mycompany/bar/** And to exclude all routes from two specific packages use:
* com/mycompany/bar/*,com/mycompany/stuff/*
*/
private String javaRoutesExcludePattern;
/**
* Sets the logging level used for logging route activity (such as starting and stopping routes). The default
* logging level is DEBUG.
*/
@Deprecated
private LoggingLevel routeControllerLoggingLevel;
/**
* To enable using supervising route controller which allows Camel to startup
* and then the controller takes care of starting the routes in a safe manner.
*
* This can be used when you want to startup Camel despite a route may otherwise
* fail fast during startup and cause Camel to fail to startup as well. By delegating
* the route startup to the supervising route controller then it manages the startup
* using a background thread. The controller allows to be configured with various
* settings to attempt to restart failing routes.
*/
boolean routeControllerSuperviseEnabled;
/**
* The number of threads used by the route controller scheduled thread pool that are used for restarting
* routes. The pool uses 1 thread by default, but you can increase this to allow the controller
* to concurrently attempt to restart multiple routes in case more than one route has problems
* starting.
*/
int routeControllerThreadPoolSize = 1;
/**
* Initial delay in milli seconds before the route controller starts, after
* CamelContext has been started.
*/
long routeControllerInitialDelay;
/**
* Backoff delay in millis when restarting a route that failed to startup.
*/
long routeControllerBackOffDelay = 2000;
/**
* Backoff maximum delay in millis when restarting a route that failed to startup.
*/
long routeControllerBackOffMaxDelay;
/**
* Backoff maximum elapsed time in millis, after which the backoff should be considered
* exhausted and no more attempts should be made.
*/
long routeControllerBackOffMaxElapsedTime;
/**
* Backoff maximum number of attempts to restart a route that failed to startup.
* When this threshold has been exceeded then the controller will give up
* attempting to restart the route, and the route will remain as stopped.
*/
long routeControllerBackOffMaxAttempts;
/**
* Backoff multiplier to use for exponential backoff. This is used to extend the delay
* between restart attempts.
*/
double routeControllerBackOffMultiplier = 1.0;
/**
* Pattern for filtering routes to be excluded as supervised.
*
* The pattern is matching on route id, and endpoint uri for the route.
* Multiple patterns can be separated by comma.
*
* For example to exclude all JMS routes, you can say jms:*.
* And to exclude routes with specific route ids mySpecialRoute,myOtherSpecialRoute.
* The pattern supports wildcards and uses the matcher from
* org.apache.camel.support.PatternHelper#matchPattern.
*/
String routeControllerIncludeRoutes;
/**
* Pattern for filtering routes to be included as supervised.
*
* The pattern is matching on route id, and endpoint uri for the route.
* Multiple patterns can be separated by comma.
*
* For example to include all kafka routes, you can say kafka:*.
* And to include routes with specific route ids myRoute,myOtherRoute.
* The pattern supports wildcards and uses the matcher from
* org.apache.camel.support.PatternHelper#matchPattern.
*/
String routeControllerExcludeRoutes;
/**
* Whether to mark the route as unhealthy (down) when all restarting attempts (backoff) have failed and the route is
* not successfully started and the route manager is giving up.
*
* Setting this to true allows health checks to know about this and can report the Camel application as DOWN.
*
* The default is false.
*/
private boolean routeControllerUnhealthyOnExhausted;
/**
* Experimental: Configure the context to be lightweight.
* This will trigger some optimizations and memory reduction options.
* Lightweight context has some limitations.
* At this moment, dynamic endpoint destinations are not supported.
*/
private boolean lightweight;
/**
* Whether to eager load a common set of Camel classes that would otherwise first be loaded on processing the first
* message. By eager loading these classes then the JVM has already loaded the classes during build phase, which
* allows Camel to process the first message faster.
*/
private boolean eagerClassloading;
/**
* Controls whether to pool (reuse) exchanges or create new exchanges (prototype). Using pooled will reduce JVM
* garbage collection overhead by avoiding to re-create Exchange instances per message each consumer receives. The
* default is prototype mode.
*/
private String exchangeFactory = "default";
/**
* The capacity the pool (for each consumer) uses for storing exchanges. The default capacity is 100.
*/
private int exchangeFactoryCapacity = 100;
/**
* Configures whether statistics is enabled on exchange factory.
*/
private boolean exchangeFactoryStatisticsEnabled;
/**
* To use startup recorder for capturing execution time during starting Camel. The recorder can be one of: false (or
* off), logging, java-flight-recorder (or jfr).
*/
private String startupRecorder;
/**
* To filter our sub steps at a maximum depth.
*
* Use -1 for no maximum. Use 0 for no sub steps. Use 1 for max 1 sub step, and so forth.
*
* The default is -1.
*/
private int startupRecorderMaxDepth = -1;
/**
* To enable Java Flight Recorder to start a recording and automatic dump the recording to disk after startup is
* complete.
*
* This requires that camel-jfr is on the classpath, and to enable this option.
*/
private boolean startupRecorderRecording;
/**
* To use a specific Java Flight Recorder profile configuration, such as default or profile.
*
* The default is default.
*/
private String startupRecorderProfile = "default";
/**
* How long time to run the startup recorder.
*
* Use 0 (default) to keep the recorder running until the JVM is exited.
* Use -1 to stop the recorder right after Camel has been started (to only focus on potential Camel startup performance bottlenecks)
* Use a positive value to keep recording for N seconds.
*
* When the recorder is stopped then the recording is auto saved to disk
* (note: save to disk can be disabled by setting startupRecorderDir to false)
*/
private long startupRecorderDuration;
/**
* Directory to store the recording. By default the user home directory will be used. Use false to turn off saving
* recording to disk.
*/
private String startupRecorderDir;
// Getters & setters
// -----------------
public boolean isMainRunController() {
return mainRunController;
}
public void setMainRunController(boolean mainRunController) {
this.mainRunController = mainRunController;
}
public boolean isIncludeNonSingletons() {
return includeNonSingletons;
}
public void setIncludeNonSingletons(boolean includeNonSingletons) {
this.includeNonSingletons = includeNonSingletons;
}
public boolean isWarnOnEarlyShutdown() {
return warnOnEarlyShutdown;
}
public void setWarnOnEarlyShutdown(boolean warnOnEarlyShutdown) {
this.warnOnEarlyShutdown = warnOnEarlyShutdown;
}
}
© 2015 - 2025 Weber Informatics LLC | Privacy Policy