org.apache.camel.component.activemq.springboot.ActiveMQComponentConfiguration Maven / Gradle / Ivy
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.camel.component.activemq.springboot;
import javax.annotation.Generated;
import org.apache.camel.LoggingLevel;
import org.apache.camel.component.activemq.ActiveMQComponent;
import org.apache.camel.component.jms.DefaultTaskExecutorType;
import org.apache.camel.component.jms.ReplyToType;
import org.apache.camel.spring.boot.ComponentConfigurationPropertiesCommon;
import org.springframework.boot.context.properties.ConfigurationProperties;
/**
* The activemq component allows messages to be sent to (or consumed from)
* Apache ActiveMQ. This component extends the Camel JMS component.
*
* Generated by camel-package-maven-plugin - do not edit this file!
*/
@Generated("org.apache.camel.maven.packaging.SpringBootAutoConfigurationMojo")
@ConfigurationProperties(prefix = "camel.component.activemq")
public class ActiveMQComponentConfiguration
extends
ComponentConfigurationPropertiesCommon {
/**
* Whether to enable auto configuration of the activemq component. This is
* enabled by default.
*/
private Boolean enabled;
/**
* Sets the broker URL to use to connect to ActiveMQ using the ActiveMQ URI
* format
*/
private String brokerURL;
/**
* Define if all packages are trusted or not
*/
private Boolean trustAllPackages = false;
/**
* If enabled this will cause all Queues in the ActiveMQ broker to be
* eagerly populated into the CamelContext so that they can be easily
* browsed by any Camel tooling. This option is disabled by default.
*/
private Boolean exposeAllQueues = false;
/**
* Enables or disables whether a PooledConnectionFactory will be used so
* that when messages are sent to ActiveMQ from outside of a message
* consuming thread, pooling will be used rather than the default with the
* Spring JmsTemplate which will create a new connection, session, producer
* for each message then close them all down again. The default value is
* true. Note that this requires an extra dependency on commons-pool2.
*/
private Boolean usePooledConnection = false;
/**
* Enables or disables whether a Spring SingleConnectionFactory will be used
* so that when messages are sent to ActiveMQ from outside of a message
* consuming thread, pooling will be used rather than the default with the
* Spring JmsTemplate which will create a new connection, session, producer
* for each message then close them all down again. The default value is
* false and a pooled connection is used by default.
*/
private Boolean useSingleConnection = false;
/**
* Configuration of ActiveMQ. The option is a
* org.apache.camel.component.jms.JmsConfiguration type.
*/
private String configuration;
/**
* Specifies whether the consumer accept messages while it is stopping. You
* may consider enabling this option, if you start and stop JMS routes at
* runtime, while there are still messages enqueued on the queue. If this
* option is false, and you stop the JMS route, then messages may be
* rejected, and the JMS broker would have to attempt redeliveries, which
* yet again may be rejected, and eventually the message may be moved at a
* dead letter queue on the JMS broker. To avoid this its recommended to
* enable this option.
*/
private Boolean acceptMessagesWhileStopping = false;
/**
* Whether the DefaultMessageListenerContainer used in the reply managers
* for request-reply messaging allow the
* DefaultMessageListenerContainer.runningAllowed flag to quick stop in case
* JmsConfiguration#isAcceptMessagesWhileStopping is enabled, and
* org.apache.camel.CamelContext is currently being stopped. This quick stop
* ability is enabled by default in the regular JMS consumers but to enable
* for reply managers you must enable this flag.
*/
private Boolean allowReplyManagerQuickStop = false;
/**
* The JMS acknowledgement mode defined as an Integer. Allows you to set
* vendor-specific extensions to the acknowledgment mode. For the regular
* modes, it is preferable to use the acknowledgementModeName instead.
*/
private Integer acknowledgementMode;
/**
* Enables eager loading of JMS properties as soon as a message is loaded
* which generally is inefficient as the JMS properties may not be required
* but sometimes can catch early any issues with the underlying JMS provider
* and the use of JMS properties
*/
private Boolean eagerLoadingOfProperties = false;
/**
* The JMS acknowledgement name, which is one of: SESSION_TRANSACTED,
* CLIENT_ACKNOWLEDGE, AUTO_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE
*/
private String acknowledgementModeName = "AUTO_ACKNOWLEDGE";
/**
* Specifies whether the consumer container should auto-startup.
*/
private Boolean autoStartup = true;
/**
* Sets the cache level by ID for the underlying JMS resources. See
* cacheLevelName option for more details.
*/
private Integer cacheLevel;
/**
* Sets the cache level by name for the underlying JMS resources. Possible
* values are: CACHE_AUTO, CACHE_CONNECTION, CACHE_CONSUMER, CACHE_NONE, and
* CACHE_SESSION. The default setting is CACHE_AUTO. See the Spring
* documentation and Transactions Cache Levels for more information.
*/
private String cacheLevelName = "CACHE_AUTO";
/**
* Sets the cache level by name for the reply consumer when doing
* request/reply over JMS. This option only applies when using fixed reply
* queues (not temporary). Camel will by default use: CACHE_CONSUMER for
* exclusive or shared w/ replyToSelectorName. And CACHE_SESSION for shared
* without replyToSelectorName. Some JMS brokers such as IBM WebSphere may
* require to set the replyToCacheLevelName=CACHE_NONE to work. Note: If
* using temporary queues then CACHE_NONE is not allowed, and you must use a
* higher value such as CACHE_CONSUMER or CACHE_SESSION.
*/
private String replyToCacheLevelName;
/**
* Sets the JMS client ID to use. Note that this value, if specified, must
* be unique and can only be used by a single JMS connection instance. It is
* typically only required for durable topic subscriptions. If using Apache
* ActiveMQ you may prefer to use Virtual Topics instead.
*/
private String clientId;
/**
* Specifies the default number of concurrent consumers when consuming from
* JMS (not for request/reply over JMS). See also the maxMessagesPerTask
* option to control dynamic scaling up/down of threads. When doing
* request/reply over JMS then the option replyToConcurrentConsumers is used
* to control number of concurrent consumers on the reply message listener.
*/
private Integer concurrentConsumers = 1;
/**
* Specifies the default number of concurrent consumers when doing
* request/reply over JMS. See also the maxMessagesPerTask option to control
* dynamic scaling up/down of threads.
*/
private Integer replyToConcurrentConsumers = 1;
/**
* The connection factory to be use. A connection factory must be configured
* either on the component or endpoint. The option is a
* javax.jms.ConnectionFactory type.
*/
private String connectionFactory;
/**
* Username to use with the ConnectionFactory. You can also configure
* username/password directly on the ConnectionFactory.
*/
private String username;
/**
* Password to use with the ConnectionFactory. You can also configure
* username/password directly on the ConnectionFactory.
*/
private String password;
/**
* Specifies whether persistent delivery is used by default.
*/
private Boolean deliveryPersistent = true;
/**
* Specifies the delivery mode to be used. Possibles values are those
* defined by javax.jms.DeliveryMode. NON_PERSISTENT = 1 and PERSISTENT = 2.
*/
private Integer deliveryMode;
/**
* The durable subscriber name for specifying durable topic subscriptions.
* The clientId option must be configured as well.
*/
private String durableSubscriptionName;
/**
* Specifies the JMS Exception Listener that is to be notified of any
* underlying JMS exceptions. The option is a javax.jms.ExceptionListener
* type.
*/
private String exceptionListener;
/**
* Specifies a org.springframework.util.ErrorHandler to be invoked in case
* of any uncaught exceptions thrown while processing a Message. By default
* these exceptions will be logged at the WARN level, if no errorHandler has
* been configured. You can configure logging level and whether stack traces
* should be logged using errorHandlerLoggingLevel and
* errorHandlerLogStackTrace options. This makes it much easier to
* configure, than having to code a custom errorHandler. The option is a
* org.springframework.util.ErrorHandler type.
*/
private String errorHandler;
/**
* Allows to configure the default errorHandler logging level for logging
* uncaught exceptions.
*/
private LoggingLevel errorHandlerLoggingLevel = LoggingLevel.WARN;
/**
* Allows to control whether stacktraces should be logged or not, by the
* default errorHandler.
*/
private Boolean errorHandlerLogStackTrace = true;
/**
* Set if the deliveryMode, priority or timeToLive qualities of service
* should be used when sending messages. This option is based on Spring's
* JmsTemplate. The deliveryMode, priority and timeToLive options are
* applied to the current endpoint. This contrasts with the
* preserveMessageQos option, which operates at message granularity, reading
* QoS properties exclusively from the Camel In message headers.
*/
private Boolean explicitQosEnabled = false;
/**
* Specifies whether the listener session should be exposed when consuming
* messages.
*/
private Boolean exposeListenerSession = false;
/**
* Specifies the limit for idle executions of a receive task, not having
* received any message within its execution. If this limit is reached, the
* task will shut down and leave receiving to other executing tasks (in the
* case of dynamic scheduling; see the maxConcurrentConsumers setting).
* There is additional doc available from Spring.
*/
private Integer idleTaskExecutionLimit = 1;
/**
* Specify the limit for the number of consumers that are allowed to be idle
* at any given time.
*/
private Integer idleConsumerLimit = 1;
/**
* Specifies the maximum number of concurrent consumers when consuming from
* JMS (not for request/reply over JMS). See also the maxMessagesPerTask
* option to control dynamic scaling up/down of threads. When doing
* request/reply over JMS then the option replyToMaxConcurrentConsumers is
* used to control number of concurrent consumers on the reply message
* listener.
*/
private Integer maxConcurrentConsumers;
/**
* Specifies the maximum number of concurrent consumers when using
* request/reply over JMS. See also the maxMessagesPerTask option to control
* dynamic scaling up/down of threads.
*/
private Integer replyToMaxConcurrentConsumers;
/**
* Specifies the maximum number of concurrent consumers for continue routing
* when timeout occurred when using request/reply over JMS.
*/
private Integer replyOnTimeoutToMaxConcurrentConsumers = 1;
/**
* The number of messages per task. -1 is unlimited. If you use a range for
* concurrent consumers (eg min max), then this option can be used to set a
* value to eg 100 to control how fast the consumers will shrink when less
* work is required.
*/
private Integer maxMessagesPerTask = -1;
/**
* To use a custom Spring
* org.springframework.jms.support.converter.MessageConverter so you can be
* in control how to map to/from a javax.jms.Message. The option is a
* org.springframework.jms.support.converter.MessageConverter type.
*/
private String messageConverter;
/**
* Specifies whether Camel should auto map the received JMS message to a
* suited payload type, such as javax.jms.TextMessage to a String etc. See
* section about how mapping works below for more details.
*/
private Boolean mapJmsMessage = true;
/**
* When sending, specifies whether message IDs should be added. This is just
* an hint to the JMS Broker. If the JMS provider accepts this hint, these
* messages must have the message ID set to null; if the provider ignores
* the hint, the message ID must be set to its normal unique value.
*/
private Boolean messageIdEnabled = true;
/**
* Specifies whether timestamps should be enabled by default on sending
* messages. This is just an hint to the JMS broker. If the JMS provider
* accepts this hint, these messages must have the timestamp set to zero; if
* the provider ignores the hint the timestamp must be set to its normal
* value.
*/
private Boolean messageTimestampEnabled = true;
/**
* If true, Camel will always make a JMS message copy of the message when it
* is passed to the producer for sending. Copying the message is needed in
* some situations, such as when a replyToDestinationSelectorName is set
* (incidentally, Camel will set the alwaysCopyMessage option to true, if a
* replyToDestinationSelectorName is set).
*/
private Boolean alwaysCopyMessage = false;
/**
* Specifies whether JMSMessageID should always be used as JMSCorrelationID
* for InOut messages.
*/
private Boolean useMessageIDAsCorrelationID = false;
/**
* Values greater than 1 specify the message priority when sending (where 0
* is the lowest priority and 9 is the highest). The explicitQosEnabled
* option must also be enabled in order for this option to have any effect.
*/
private Integer priority = 4;
/**
* Specifies whether to inhibit the delivery of messages published by its
* own connection.
*/
private Boolean pubSubNoLocal = false;
/**
* The timeout for receiving messages (in milliseconds).
*/
private Long receiveTimeout = 1000L;
/**
* Specifies the interval between recovery attempts, i.e. when a connection
* is being refreshed, in milliseconds. The default is 5000 ms, that is, 5
* seconds.
*/
private Long recoveryInterval = 5000L;
/**
* Allows you to specify a custom task executor for consuming messages. The
* option is a org.springframework.core.task.TaskExecutor type.
*/
private String taskExecutor;
/**
* When sending messages, specifies the time-to-live of the message (in
* milliseconds).
*/
private Long timeToLive = -1L;
/**
* Specifies whether to use transacted mode
*/
private Boolean transacted = false;
/**
* If true, Camel will create a JmsTransactionManager, if there is no
* transactionManager injected when option transacted=true.
*/
private Boolean lazyCreateTransactionManager = true;
/**
* The Spring transaction manager to use. The option is a
* org.springframework.transaction.PlatformTransactionManager type.
*/
private String transactionManager;
/**
* The name of the transaction to use.
*/
private String transactionName;
/**
* The timeout value of the transaction (in seconds), if using transacted
* mode.
*/
private Integer transactionTimeout = -1;
/**
* Specifies whether to test the connection on startup. This ensures that
* when Camel starts that all the JMS consumers have a valid connection to
* the JMS broker. If a connection cannot be granted then Camel throws an
* exception on startup. This ensures that Camel is not started with failed
* connections. The JMS producers is tested as well.
*/
private Boolean testConnectionOnStartup = false;
/**
* Whether to startup the JmsConsumer message listener asynchronously, when
* starting a route. For example if a JmsConsumer cannot get a connection to
* a remote JMS broker, then it may block while retrying and/or failover.
* This will cause Camel to block while starting routes. By setting this
* option to true, you will let routes startup, while the JmsConsumer
* connects to the JMS broker using a dedicated thread in asynchronous mode.
* If this option is used, then beware that if the connection could not be
* established, then an exception is logged at WARN level, and the consumer
* will not be able to receive messages; You can then restart the route to
* retry.
*/
private Boolean asyncStartListener = false;
/**
* Whether to stop the JmsConsumer message listener asynchronously, when
* stopping a route.
*/
private Boolean asyncStopListener = false;
/**
* When using mapJmsMessage=false Camel will create a new JMS message to
* send to a new JMS destination if you touch the headers (get or set)
* during the route. Set this option to true to force Camel to send the
* original JMS message that was received.
*/
private Boolean forceSendOriginalMessage = false;
/**
* The timeout for waiting for a reply when using the InOut Exchange Pattern
* (in milliseconds). The default is 20 seconds. You can include the header
* CamelJmsRequestTimeout to override this endpoint configured timeout
* value, and thus have per message individual timeout values. See also the
* requestTimeoutCheckerInterval option.
*/
private Long requestTimeout = 20000L;
/**
* Configures how often Camel should check for timed out Exchanges when
* doing request/reply over JMS. By default Camel checks once per second.
* But if you must react faster when a timeout occurs, then you can lower
* this interval, to check more frequently. The timeout is determined by the
* option requestTimeout.
*/
private Long requestTimeoutCheckerInterval = 1000L;
/**
* You can transfer the exchange over the wire instead of just the body and
* headers. The following fields are transferred: In body, Out body, Fault
* body, In headers, Out headers, Fault headers, exchange properties,
* exchange exception. This requires that the objects are serializable.
* Camel will exclude any non-serializable objects and log it at WARN level.
* You must enable this option on both the producer and consumer side, so
* Camel knows the payloads is an Exchange and not a regular payload.
*/
private Boolean transferExchange = false;
/**
* If enabled and you are using Request Reply messaging (InOut) and an
* Exchange failed on the consumer side, then the caused Exception will be
* send back in response as a javax.jms.ObjectMessage. If the client is
* Camel, the returned Exception is rethrown. This allows you to use Camel
* JMS as a bridge in your routing - for example, using persistent queues to
* enable robust routing. Notice that if you also have transferExchange
* enabled, this option takes precedence. The caught exception is required
* to be serializable. The original Exception on the consumer side can be
* wrapped in an outer exception such as
* org.apache.camel.RuntimeCamelException when returned to the producer.
*/
private Boolean transferException = false;
/**
* If enabled and you are using Request Reply messaging (InOut) and an
* Exchange failed with a SOAP fault (not exception) on the consumer side,
* then the fault flag on org.apache.camel.Message#isFault() will be send
* back in the response as a JMS header with the key
* JmsConstants#JMS_TRANSFER_FAULT. If the client is Camel, the returned
* fault flag will be set on the org.apache.camel.Message#setFault(boolean).
* You may want to enable this when using Camel components that support
* faults such as SOAP based such as cxf or spring-ws.
*/
private Boolean transferFault = false;
/**
* Allows you to use your own implementation of the
* org.springframework.jms.core.JmsOperations interface. Camel uses
* JmsTemplate as default. Can be used for testing purpose, but not used
* much as stated in the spring API docs. The option is a
* org.springframework.jms.core.JmsOperations type.
*/
private String jmsOperations;
/**
* A pluggable
* org.springframework.jms.support.destination.DestinationResolver that
* allows you to use your own resolver (for example, to lookup the real
* destination in a JNDI registry). The option is a
* org.springframework.jms.support.destination.DestinationResolver type.
*/
private String destinationResolver;
/**
* Allows for explicitly specifying which kind of strategy to use for
* replyTo queues when doing request/reply over JMS. Possible values are:
* Temporary, Shared, or Exclusive. By default Camel will use temporary
* queues. However if replyTo has been configured, then Shared is used by
* default. This option allows you to use exclusive queues instead of shared
* ones. See Camel JMS documentation for more details, and especially the
* notes about the implications if running in a clustered environment, and
* the fact that Shared reply queues has lower performance than its
* alternatives Temporary and Exclusive.
*/
private ReplyToType replyToType;
/**
* Set to true, if you want to send message using the QoS settings specified
* on the message, instead of the QoS settings on the JMS endpoint. The
* following three headers are considered JMSPriority, JMSDeliveryMode, and
* JMSExpiration. You can provide all or only some of them. If not provided,
* Camel will fall back to use the values from the endpoint instead. So,
* when using this option, the headers override the values from the
* endpoint. The explicitQosEnabled option, by contrast, will only use
* options set on the endpoint, and not values from the message header.
*/
private Boolean preserveMessageQos = false;
/**
* Whether the JmsConsumer processes the Exchange asynchronously. If enabled
* then the JmsConsumer may pickup the next message from the JMS queue,
* while the previous message is being processed asynchronously (by the
* Asynchronous Routing Engine). This means that messages may be processed
* not 100% strictly in order. If disabled (as default) then the Exchange is
* fully processed before the JmsConsumer will pickup the next message from
* the JMS queue. Note if transacted has been enabled, then
* asyncConsumer=true does not run asynchronously, as transaction must be
* executed synchronously (Camel 3.0 may support async transactions).
*/
private Boolean asyncConsumer = false;
/**
* Whether to allow sending messages with no body. If this option is false
* and the message body is null, then an JMSException is thrown.
*/
private Boolean allowNullBody = true;
/**
* Only applicable when sending to JMS destination using InOnly (eg fire and
* forget). Enabling this option will enrich the Camel Exchange with the
* actual JMSMessageID that was used by the JMS client when the message was
* sent to the JMS destination.
*/
private Boolean includeSentJMSMessageID = false;
/**
* Whether to include all JMSXxxx properties when mapping from JMS to Camel
* Message. Setting this to true will include properties such as JMSXAppID,
* and JMSXUserID etc. Note: If you are using a custom headerFilterStrategy
* then this option does not apply.
*/
private Boolean includeAllJMSXProperties = false;
/**
* Specifies what default TaskExecutor type to use in the
* DefaultMessageListenerContainer, for both consumer endpoints and the
* ReplyTo consumer of producer endpoints. Possible values: SimpleAsync
* (uses Spring's SimpleAsyncTaskExecutor) or ThreadPool (uses Spring's
* ThreadPoolTaskExecutor with optimal values - cached threadpool-like). If
* not set, it defaults to the previous behaviour, which uses a cached
* thread pool for consumer endpoints and SimpleAsync for reply consumers.
* The use of ThreadPool is recommended to reduce thread trash in elastic
* configurations with dynamically increasing and decreasing concurrent
* consumers.
*/
private DefaultTaskExecutorType defaultTaskExecutorType;
/**
* Pluggable strategy for encoding and decoding JMS keys so they can be
* compliant with the JMS specification. Camel provides two implementations
* out of the box: default and passthrough. The default strategy will safely
* marshal dots and hyphens (. and -). The passthrough strategy leaves the
* key as is. Can be used for JMS brokers which do not care whether JMS
* header keys contain illegal characters. You can provide your own
* implementation of the org.apache.camel.component.jms.JmsKeyFormatStrategy
* and refer to it using the # notation. The option is a
* org.apache.camel.component.jms.JmsKeyFormatStrategy type.
*/
private String jmsKeyFormatStrategy;
/**
* This option is used to allow additional headers which may have values
* that are invalid according to JMS specification. For example some message
* systems such as WMQ do this with header names using prefix JMS_IBM_MQMD_
* containing values with byte array or other invalid types. You can specify
* multiple header names separated by comma, and use as suffix for wildcard
* matching.
*/
private String allowAdditionalHeaders;
/**
* To use a custom QueueBrowseStrategy when browsing queues. The option is a
* org.apache.camel.component.jms.QueueBrowseStrategy type.
*/
private String queueBrowseStrategy;
/**
* To use the given MessageCreatedStrategy which are invoked when Camel
* creates new instances of javax.jms.Message objects when Camel is sending
* a JMS message. The option is a
* org.apache.camel.component.jms.MessageCreatedStrategy type.
*/
private String messageCreatedStrategy;
/**
* Number of times to wait for provisional correlation id to be updated to
* the actual correlation id when doing request/reply over JMS and when the
* option useMessageIDAsCorrelationID is enabled.
*/
private Integer waitForProvisionCorrelationToBeUpdatedCounter = 50;
/**
* Interval in millis to sleep each time while waiting for provisional
* correlation id to be updated.
*/
private Long waitForProvisionCorrelationToBeUpdatedThreadSleepingTime = 100L;
/**
* Use this JMS property to correlate messages in InOut exchange pattern
* (request-reply) instead of JMSCorrelationID property. This allows you to
* exchange messages with systems that do not correlate messages using
* JMSCorrelationID JMS property. If used JMSCorrelationID will not be used
* or set by Camel. The value of here named property will be generated if
* not supplied in the header of the message under the same name.
*/
private String correlationProperty;
/**
* Set whether to make the subscription durable. The durable subscription
* name to be used can be specified through the subscriptionName property.
* Default is false. Set this to true to register a durable subscription,
* typically in combination with a subscriptionName value (unless your
* message listener class name is good enough as subscription name). Only
* makes sense when listening to a topic (pub-sub domain), therefore this
* method switches the pubSubDomain flag as well.
*/
private Boolean subscriptionDurable = false;
/**
* Set whether to make the subscription shared. The shared subscription name
* to be used can be specified through the subscriptionName property.
* Default is false. Set this to true to register a shared subscription,
* typically in combination with a subscriptionName value (unless your
* message listener class name is good enough as subscription name). Note
* that shared subscriptions may also be durable, so this flag can (and
* often will) be combined with subscriptionDurable as well. Only makes
* sense when listening to a topic (pub-sub domain), therefore this method
* switches the pubSubDomain flag as well. Requires a JMS 2.0 compatible
* message broker.
*/
private Boolean subscriptionShared = false;
/**
* Set the name of a subscription to create. To be applied in case of a
* topic (pub-sub domain) with a shared or durable subscription. The
* subscription name needs to be unique within this client's JMS client id.
* Default is the class name of the specified message listener. Note: Only 1
* concurrent consumer (which is the default of this message listener
* container) is allowed for each subscription, except for a shared
* subscription (which requires JMS 2.0).
*/
private String subscriptionName;
/**
* Sets whether StreamMessage type is enabled or not. Message payloads of
* streaming kind such as files, InputStream, etc will either by sent as
* BytesMessage or StreamMessage. This option controls which kind will be
* used. By default BytesMessage is used which enforces the entire message
* payload to be read into memory. By enabling this option the message
* payload is read into memory in chunks and each chunk is then written to
* the StreamMessage until no more data.
*/
private Boolean streamMessageTypeEnabled = false;
/**
* Sets whether date headers should be formatted according to the ISO 8601
* standard.
*/
private Boolean formatDateHeadersToIso8601 = false;
/**
* To use a custom org.apache.camel.spi.HeaderFilterStrategy to filter
* header to and from Camel message. The option is a
* org.apache.camel.spi.HeaderFilterStrategy type.
*/
private String headerFilterStrategy;
/**
* Whether the component should resolve property placeholders on itself when
* starting. Only properties which are of String type can use property
* placeholders.
*/
private Boolean resolvePropertyPlaceholders = true;
/**
* Whether the component should use basic property binding (Camel 2.x) or
* the newer property binding with additional capabilities
*/
private Boolean basicPropertyBinding = false;
public String getBrokerURL() {
return brokerURL;
}
public void setBrokerURL(String brokerURL) {
this.brokerURL = brokerURL;
}
public Boolean getTrustAllPackages() {
return trustAllPackages;
}
public void setTrustAllPackages(Boolean trustAllPackages) {
this.trustAllPackages = trustAllPackages;
}
public Boolean getExposeAllQueues() {
return exposeAllQueues;
}
public void setExposeAllQueues(Boolean exposeAllQueues) {
this.exposeAllQueues = exposeAllQueues;
}
public Boolean getUsePooledConnection() {
return usePooledConnection;
}
public void setUsePooledConnection(Boolean usePooledConnection) {
this.usePooledConnection = usePooledConnection;
}
public Boolean getUseSingleConnection() {
return useSingleConnection;
}
public void setUseSingleConnection(Boolean useSingleConnection) {
this.useSingleConnection = useSingleConnection;
}
public String getConfiguration() {
return configuration;
}
public void setConfiguration(String configuration) {
this.configuration = configuration;
}
public Boolean getAcceptMessagesWhileStopping() {
return acceptMessagesWhileStopping;
}
public void setAcceptMessagesWhileStopping(
Boolean acceptMessagesWhileStopping) {
this.acceptMessagesWhileStopping = acceptMessagesWhileStopping;
}
public Boolean getAllowReplyManagerQuickStop() {
return allowReplyManagerQuickStop;
}
public void setAllowReplyManagerQuickStop(Boolean allowReplyManagerQuickStop) {
this.allowReplyManagerQuickStop = allowReplyManagerQuickStop;
}
public Integer getAcknowledgementMode() {
return acknowledgementMode;
}
public void setAcknowledgementMode(Integer acknowledgementMode) {
this.acknowledgementMode = acknowledgementMode;
}
public Boolean getEagerLoadingOfProperties() {
return eagerLoadingOfProperties;
}
public void setEagerLoadingOfProperties(Boolean eagerLoadingOfProperties) {
this.eagerLoadingOfProperties = eagerLoadingOfProperties;
}
public String getAcknowledgementModeName() {
return acknowledgementModeName;
}
public void setAcknowledgementModeName(String acknowledgementModeName) {
this.acknowledgementModeName = acknowledgementModeName;
}
public Boolean getAutoStartup() {
return autoStartup;
}
public void setAutoStartup(Boolean autoStartup) {
this.autoStartup = autoStartup;
}
public Integer getCacheLevel() {
return cacheLevel;
}
public void setCacheLevel(Integer cacheLevel) {
this.cacheLevel = cacheLevel;
}
public String getCacheLevelName() {
return cacheLevelName;
}
public void setCacheLevelName(String cacheLevelName) {
this.cacheLevelName = cacheLevelName;
}
public String getReplyToCacheLevelName() {
return replyToCacheLevelName;
}
public void setReplyToCacheLevelName(String replyToCacheLevelName) {
this.replyToCacheLevelName = replyToCacheLevelName;
}
public String getClientId() {
return clientId;
}
public void setClientId(String clientId) {
this.clientId = clientId;
}
public Integer getConcurrentConsumers() {
return concurrentConsumers;
}
public void setConcurrentConsumers(Integer concurrentConsumers) {
this.concurrentConsumers = concurrentConsumers;
}
public Integer getReplyToConcurrentConsumers() {
return replyToConcurrentConsumers;
}
public void setReplyToConcurrentConsumers(Integer replyToConcurrentConsumers) {
this.replyToConcurrentConsumers = replyToConcurrentConsumers;
}
public String getConnectionFactory() {
return connectionFactory;
}
public void setConnectionFactory(String connectionFactory) {
this.connectionFactory = connectionFactory;
}
public String getUsername() {
return username;
}
public void setUsername(String username) {
this.username = username;
}
public String getPassword() {
return password;
}
public void setPassword(String password) {
this.password = password;
}
public Boolean getDeliveryPersistent() {
return deliveryPersistent;
}
public void setDeliveryPersistent(Boolean deliveryPersistent) {
this.deliveryPersistent = deliveryPersistent;
}
public Integer getDeliveryMode() {
return deliveryMode;
}
public void setDeliveryMode(Integer deliveryMode) {
this.deliveryMode = deliveryMode;
}
public String getDurableSubscriptionName() {
return durableSubscriptionName;
}
public void setDurableSubscriptionName(String durableSubscriptionName) {
this.durableSubscriptionName = durableSubscriptionName;
}
public String getExceptionListener() {
return exceptionListener;
}
public void setExceptionListener(String exceptionListener) {
this.exceptionListener = exceptionListener;
}
public String getErrorHandler() {
return errorHandler;
}
public void setErrorHandler(String errorHandler) {
this.errorHandler = errorHandler;
}
public LoggingLevel getErrorHandlerLoggingLevel() {
return errorHandlerLoggingLevel;
}
public void setErrorHandlerLoggingLevel(
LoggingLevel errorHandlerLoggingLevel) {
this.errorHandlerLoggingLevel = errorHandlerLoggingLevel;
}
public Boolean getErrorHandlerLogStackTrace() {
return errorHandlerLogStackTrace;
}
public void setErrorHandlerLogStackTrace(Boolean errorHandlerLogStackTrace) {
this.errorHandlerLogStackTrace = errorHandlerLogStackTrace;
}
public Boolean getExplicitQosEnabled() {
return explicitQosEnabled;
}
public void setExplicitQosEnabled(Boolean explicitQosEnabled) {
this.explicitQosEnabled = explicitQosEnabled;
}
public Boolean getExposeListenerSession() {
return exposeListenerSession;
}
public void setExposeListenerSession(Boolean exposeListenerSession) {
this.exposeListenerSession = exposeListenerSession;
}
public Integer getIdleTaskExecutionLimit() {
return idleTaskExecutionLimit;
}
public void setIdleTaskExecutionLimit(Integer idleTaskExecutionLimit) {
this.idleTaskExecutionLimit = idleTaskExecutionLimit;
}
public Integer getIdleConsumerLimit() {
return idleConsumerLimit;
}
public void setIdleConsumerLimit(Integer idleConsumerLimit) {
this.idleConsumerLimit = idleConsumerLimit;
}
public Integer getMaxConcurrentConsumers() {
return maxConcurrentConsumers;
}
public void setMaxConcurrentConsumers(Integer maxConcurrentConsumers) {
this.maxConcurrentConsumers = maxConcurrentConsumers;
}
public Integer getReplyToMaxConcurrentConsumers() {
return replyToMaxConcurrentConsumers;
}
public void setReplyToMaxConcurrentConsumers(
Integer replyToMaxConcurrentConsumers) {
this.replyToMaxConcurrentConsumers = replyToMaxConcurrentConsumers;
}
public Integer getReplyOnTimeoutToMaxConcurrentConsumers() {
return replyOnTimeoutToMaxConcurrentConsumers;
}
public void setReplyOnTimeoutToMaxConcurrentConsumers(
Integer replyOnTimeoutToMaxConcurrentConsumers) {
this.replyOnTimeoutToMaxConcurrentConsumers = replyOnTimeoutToMaxConcurrentConsumers;
}
public Integer getMaxMessagesPerTask() {
return maxMessagesPerTask;
}
public void setMaxMessagesPerTask(Integer maxMessagesPerTask) {
this.maxMessagesPerTask = maxMessagesPerTask;
}
public String getMessageConverter() {
return messageConverter;
}
public void setMessageConverter(String messageConverter) {
this.messageConverter = messageConverter;
}
public Boolean getMapJmsMessage() {
return mapJmsMessage;
}
public void setMapJmsMessage(Boolean mapJmsMessage) {
this.mapJmsMessage = mapJmsMessage;
}
public Boolean getMessageIdEnabled() {
return messageIdEnabled;
}
public void setMessageIdEnabled(Boolean messageIdEnabled) {
this.messageIdEnabled = messageIdEnabled;
}
public Boolean getMessageTimestampEnabled() {
return messageTimestampEnabled;
}
public void setMessageTimestampEnabled(Boolean messageTimestampEnabled) {
this.messageTimestampEnabled = messageTimestampEnabled;
}
public Boolean getAlwaysCopyMessage() {
return alwaysCopyMessage;
}
public void setAlwaysCopyMessage(Boolean alwaysCopyMessage) {
this.alwaysCopyMessage = alwaysCopyMessage;
}
public Boolean getUseMessageIDAsCorrelationID() {
return useMessageIDAsCorrelationID;
}
public void setUseMessageIDAsCorrelationID(
Boolean useMessageIDAsCorrelationID) {
this.useMessageIDAsCorrelationID = useMessageIDAsCorrelationID;
}
public Integer getPriority() {
return priority;
}
public void setPriority(Integer priority) {
this.priority = priority;
}
public Boolean getPubSubNoLocal() {
return pubSubNoLocal;
}
public void setPubSubNoLocal(Boolean pubSubNoLocal) {
this.pubSubNoLocal = pubSubNoLocal;
}
public Long getReceiveTimeout() {
return receiveTimeout;
}
public void setReceiveTimeout(Long receiveTimeout) {
this.receiveTimeout = receiveTimeout;
}
public Long getRecoveryInterval() {
return recoveryInterval;
}
public void setRecoveryInterval(Long recoveryInterval) {
this.recoveryInterval = recoveryInterval;
}
public String getTaskExecutor() {
return taskExecutor;
}
public void setTaskExecutor(String taskExecutor) {
this.taskExecutor = taskExecutor;
}
public Long getTimeToLive() {
return timeToLive;
}
public void setTimeToLive(Long timeToLive) {
this.timeToLive = timeToLive;
}
public Boolean getTransacted() {
return transacted;
}
public void setTransacted(Boolean transacted) {
this.transacted = transacted;
}
public Boolean getLazyCreateTransactionManager() {
return lazyCreateTransactionManager;
}
public void setLazyCreateTransactionManager(
Boolean lazyCreateTransactionManager) {
this.lazyCreateTransactionManager = lazyCreateTransactionManager;
}
public String getTransactionManager() {
return transactionManager;
}
public void setTransactionManager(String transactionManager) {
this.transactionManager = transactionManager;
}
public String getTransactionName() {
return transactionName;
}
public void setTransactionName(String transactionName) {
this.transactionName = transactionName;
}
public Integer getTransactionTimeout() {
return transactionTimeout;
}
public void setTransactionTimeout(Integer transactionTimeout) {
this.transactionTimeout = transactionTimeout;
}
public Boolean getTestConnectionOnStartup() {
return testConnectionOnStartup;
}
public void setTestConnectionOnStartup(Boolean testConnectionOnStartup) {
this.testConnectionOnStartup = testConnectionOnStartup;
}
public Boolean getAsyncStartListener() {
return asyncStartListener;
}
public void setAsyncStartListener(Boolean asyncStartListener) {
this.asyncStartListener = asyncStartListener;
}
public Boolean getAsyncStopListener() {
return asyncStopListener;
}
public void setAsyncStopListener(Boolean asyncStopListener) {
this.asyncStopListener = asyncStopListener;
}
public Boolean getForceSendOriginalMessage() {
return forceSendOriginalMessage;
}
public void setForceSendOriginalMessage(Boolean forceSendOriginalMessage) {
this.forceSendOriginalMessage = forceSendOriginalMessage;
}
public Long getRequestTimeout() {
return requestTimeout;
}
public void setRequestTimeout(Long requestTimeout) {
this.requestTimeout = requestTimeout;
}
public Long getRequestTimeoutCheckerInterval() {
return requestTimeoutCheckerInterval;
}
public void setRequestTimeoutCheckerInterval(
Long requestTimeoutCheckerInterval) {
this.requestTimeoutCheckerInterval = requestTimeoutCheckerInterval;
}
public Boolean getTransferExchange() {
return transferExchange;
}
public void setTransferExchange(Boolean transferExchange) {
this.transferExchange = transferExchange;
}
public Boolean getTransferException() {
return transferException;
}
public void setTransferException(Boolean transferException) {
this.transferException = transferException;
}
public Boolean getTransferFault() {
return transferFault;
}
public void setTransferFault(Boolean transferFault) {
this.transferFault = transferFault;
}
public String getJmsOperations() {
return jmsOperations;
}
public void setJmsOperations(String jmsOperations) {
this.jmsOperations = jmsOperations;
}
public String getDestinationResolver() {
return destinationResolver;
}
public void setDestinationResolver(String destinationResolver) {
this.destinationResolver = destinationResolver;
}
public ReplyToType getReplyToType() {
return replyToType;
}
public void setReplyToType(ReplyToType replyToType) {
this.replyToType = replyToType;
}
public Boolean getPreserveMessageQos() {
return preserveMessageQos;
}
public void setPreserveMessageQos(Boolean preserveMessageQos) {
this.preserveMessageQos = preserveMessageQos;
}
public Boolean getAsyncConsumer() {
return asyncConsumer;
}
public void setAsyncConsumer(Boolean asyncConsumer) {
this.asyncConsumer = asyncConsumer;
}
public Boolean getAllowNullBody() {
return allowNullBody;
}
public void setAllowNullBody(Boolean allowNullBody) {
this.allowNullBody = allowNullBody;
}
public Boolean getIncludeSentJMSMessageID() {
return includeSentJMSMessageID;
}
public void setIncludeSentJMSMessageID(Boolean includeSentJMSMessageID) {
this.includeSentJMSMessageID = includeSentJMSMessageID;
}
public Boolean getIncludeAllJMSXProperties() {
return includeAllJMSXProperties;
}
public void setIncludeAllJMSXProperties(Boolean includeAllJMSXProperties) {
this.includeAllJMSXProperties = includeAllJMSXProperties;
}
public DefaultTaskExecutorType getDefaultTaskExecutorType() {
return defaultTaskExecutorType;
}
public void setDefaultTaskExecutorType(
DefaultTaskExecutorType defaultTaskExecutorType) {
this.defaultTaskExecutorType = defaultTaskExecutorType;
}
public String getJmsKeyFormatStrategy() {
return jmsKeyFormatStrategy;
}
public void setJmsKeyFormatStrategy(String jmsKeyFormatStrategy) {
this.jmsKeyFormatStrategy = jmsKeyFormatStrategy;
}
public String getAllowAdditionalHeaders() {
return allowAdditionalHeaders;
}
public void setAllowAdditionalHeaders(String allowAdditionalHeaders) {
this.allowAdditionalHeaders = allowAdditionalHeaders;
}
public String getQueueBrowseStrategy() {
return queueBrowseStrategy;
}
public void setQueueBrowseStrategy(String queueBrowseStrategy) {
this.queueBrowseStrategy = queueBrowseStrategy;
}
public String getMessageCreatedStrategy() {
return messageCreatedStrategy;
}
public void setMessageCreatedStrategy(String messageCreatedStrategy) {
this.messageCreatedStrategy = messageCreatedStrategy;
}
public Integer getWaitForProvisionCorrelationToBeUpdatedCounter() {
return waitForProvisionCorrelationToBeUpdatedCounter;
}
public void setWaitForProvisionCorrelationToBeUpdatedCounter(
Integer waitForProvisionCorrelationToBeUpdatedCounter) {
this.waitForProvisionCorrelationToBeUpdatedCounter = waitForProvisionCorrelationToBeUpdatedCounter;
}
public Long getWaitForProvisionCorrelationToBeUpdatedThreadSleepingTime() {
return waitForProvisionCorrelationToBeUpdatedThreadSleepingTime;
}
public void setWaitForProvisionCorrelationToBeUpdatedThreadSleepingTime(
Long waitForProvisionCorrelationToBeUpdatedThreadSleepingTime) {
this.waitForProvisionCorrelationToBeUpdatedThreadSleepingTime = waitForProvisionCorrelationToBeUpdatedThreadSleepingTime;
}
public String getCorrelationProperty() {
return correlationProperty;
}
public void setCorrelationProperty(String correlationProperty) {
this.correlationProperty = correlationProperty;
}
public Boolean getSubscriptionDurable() {
return subscriptionDurable;
}
public void setSubscriptionDurable(Boolean subscriptionDurable) {
this.subscriptionDurable = subscriptionDurable;
}
public Boolean getSubscriptionShared() {
return subscriptionShared;
}
public void setSubscriptionShared(Boolean subscriptionShared) {
this.subscriptionShared = subscriptionShared;
}
public String getSubscriptionName() {
return subscriptionName;
}
public void setSubscriptionName(String subscriptionName) {
this.subscriptionName = subscriptionName;
}
public Boolean getStreamMessageTypeEnabled() {
return streamMessageTypeEnabled;
}
public void setStreamMessageTypeEnabled(Boolean streamMessageTypeEnabled) {
this.streamMessageTypeEnabled = streamMessageTypeEnabled;
}
public Boolean getFormatDateHeadersToIso8601() {
return formatDateHeadersToIso8601;
}
public void setFormatDateHeadersToIso8601(Boolean formatDateHeadersToIso8601) {
this.formatDateHeadersToIso8601 = formatDateHeadersToIso8601;
}
public String getHeaderFilterStrategy() {
return headerFilterStrategy;
}
public void setHeaderFilterStrategy(String headerFilterStrategy) {
this.headerFilterStrategy = headerFilterStrategy;
}
public Boolean getResolvePropertyPlaceholders() {
return resolvePropertyPlaceholders;
}
public void setResolvePropertyPlaceholders(
Boolean resolvePropertyPlaceholders) {
this.resolvePropertyPlaceholders = resolvePropertyPlaceholders;
}
public Boolean getBasicPropertyBinding() {
return basicPropertyBinding;
}
public void setBasicPropertyBinding(Boolean basicPropertyBinding) {
this.basicPropertyBinding = basicPropertyBinding;
}
}© 2015 - 2025 Weber Informatics LLC | Privacy Policy