org.apache.camel.ProducerTemplate Maven / Gradle / Ivy
The newest version!
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.camel;
import java.util.Map;
import java.util.concurrent.CompletableFuture;
import java.util.concurrent.ExecutorService;
import java.util.concurrent.Future;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;
/**
* Template for working with Camel and sending {@link Message} instances in an {@link Exchange} to an {@link Endpoint}.
*
*
* Important: Read the javadoc of each method carefully to ensure the behavior of the method is understood. Some
* methods is for InOnly, others for InOut MEP. And some methods throws
* {@link org.apache.camel.CamelExecutionException} while others stores any thrown exception on the returned
* {@link Exchange}.
*
* The {@link ProducerTemplate} is thread safe.
*
* All the methods which sends a message may throw {@link FailedToCreateProducerException} in case the {@link Producer}
* could not be created. Or a {@link NoSuchEndpointException} if the endpoint could not be resolved. There may be other
* related exceptions being thrown which occurs before the {@link Producer} has started sending the message.
*
*
* All the sendBody or requestBody methods will return the content according to this strategy:
*
* - throws {@link org.apache.camel.CamelExecutionException} if processing failed during routing with the
* caused exception wrapped
* - The fault.body if there is a fault message set and its not null
* - Either IN or OUT body according to the message exchange pattern. If the pattern is Out capable
* then the OUT body is returned, otherwise IN.
*
*
*
* Before using the template it must be started. And when you are done using the template, make sure to {@link #stop()}
* the template.
*
* Important note on usage: See this
* FAQ entry before
* using.
*
* @see FluentProducerTemplate
* @see ConsumerTemplate
*/
public interface ProducerTemplate extends Service {
/**
* Get the {@link CamelContext}
*
* @return camelContext the Camel context
*/
CamelContext getCamelContext();
// Configuration methods
// -----------------------------------------------------------------------
/**
* Gets the maximum cache size used in the backing cache pools.
*
* @return the maximum cache size
*/
int getMaximumCacheSize();
/**
* Sets a custom maximum cache size to use in the backing cache pools.
*
* @param maximumCacheSize the custom maximum cache size
*/
void setMaximumCacheSize(int maximumCacheSize);
/**
* Gets an approximated size of the current cached resources in the backing cache pools.
*
* @return the size of current cached resources
*/
int getCurrentCacheSize();
/**
* Reports if async* methods will dispatch processing from the calling thread (false) or through executor (true). In
* both cases asynchronous engine will be used, so this non-threaded can be useful for high-speed non-blocking
* processing.
*
* @return if async* methods will dispatch processing with the executor
*/
boolean isThreadedAsyncMode();
/**
* Reports if async* methods will dispatch processing from the calling thread (false) or through executor (true). In
* both cases asynchronous engine will be used, so this non-threaded can be useful for high-speed non-blocking
* processing.
*
* @param useExecutor if async* methods will dispatch processing with the executor
*/
void setThreadedAsyncMode(boolean useExecutor);
/**
* Get the default endpoint to use if none is specified
*
* @return the default endpoint instance
*/
Endpoint getDefaultEndpoint();
/**
* Sets the default endpoint to use if none is specified
*
* @param defaultEndpoint the default endpoint instance
*/
void setDefaultEndpoint(Endpoint defaultEndpoint);
/**
* Sets the default endpoint uri to use if none is specified
*
* @param endpointUri the default endpoint uri
*/
void setDefaultEndpointUri(String endpointUri);
/**
* Sets whether the {@link org.apache.camel.spi.EventNotifier} should be used by this {@link ProducerTemplate} to
* send events about the {@link Exchange} being sent.
*
* By default this is enabled.
*
* @param enabled true to enable, false to disable.
*/
void setEventNotifierEnabled(boolean enabled);
/**
* Whether the {@link org.apache.camel.spi.EventNotifier} should be used by this {@link ProducerTemplate} to send
* events about the {@link Exchange} being sent.
*
* @return true if enabled, false otherwise
*/
boolean isEventNotifierEnabled();
/**
* Cleanup the cache (purging stale entries)
*/
void cleanUp();
// Synchronous methods
// -----------------------------------------------------------------------
/**
* Sends the exchange to the default endpoint
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param exchange the exchange to send
* @return the returned exchange
*/
Exchange send(Exchange exchange);
/**
* Sends an exchange to the default endpoint using a supplied processor
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param processor the transformer used to populate the new exchange {@link Processor} to populate the exchange
* @return the returned exchange
*/
Exchange send(Processor processor);
/**
* Sends the body to the default endpoint
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param body the payload to send
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBody(Object body) throws CamelExecutionException;
/**
* Sends the body to the default endpoint with a specified header and header value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param body the payload to send
* @param header the header name
* @param headerValue the header value
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndHeader(Object body, String header, Object headerValue) throws CamelExecutionException;
/**
* Sends the body to the default endpoint with a specified property and property value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param body the payload to send
* @param property the property name
* @param propertyValue the property value
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndProperty(Object body, String property, Object propertyValue) throws CamelExecutionException;
/**
* Sends the body to the default endpoint with the specified headers and header values
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param body the payload to send
* @param headers the headers
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndHeaders(Object body, Map headers) throws CamelExecutionException;
// Allow sending to arbitrary endpoints
// -----------------------------------------------------------------------
/**
* Sends the exchange to the given endpoint
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpointUri the endpoint URI to send the exchange to
* @param exchange the exchange to send
* @return the returned exchange
* @throws CamelExecutionException if the processing of the exchange failed
*/
Exchange send(String endpointUri, Exchange exchange);
/**
* Sends an exchange to an endpoint using a supplied processor
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpointUri the endpoint URI to send the exchange to
* @param processor the transformer used to populate the new exchange {@link Processor} to populate
* the exchange
* @return the returned exchange
* @throws CamelExecutionException if the processing of the exchange failed
*/
Exchange send(String endpointUri, Processor processor);
/**
* Sends an exchange to an endpoint using a supplied processor
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpointUri the endpoint URI to send the exchange to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param processor the transformer used to populate the new exchange {@link Processor} to populate the exchange
* @return the returned exchange
*/
Exchange send(String endpointUri, ExchangePattern pattern, Processor processor);
/**
* Sends the exchange to the given endpoint
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpoint the endpoint to send the exchange to
* @param exchange the exchange to send
* @return the returned exchange
*/
Exchange send(Endpoint endpoint, Exchange exchange);
/**
* Sends an exchange to an endpoint using a supplied processor
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpoint the endpoint to send the exchange to
* @param processor the transformer used to populate the new exchange {@link Processor} to populate the exchange
* @return the returned exchange
*/
Exchange send(Endpoint endpoint, Processor processor);
/**
* Sends an exchange to an endpoint using a supplied processor
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpoint the endpoint to send the exchange to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param processor the transformer used to populate the new exchange {@link Processor} to populate the exchange
* @return the returned exchange
*/
Exchange send(Endpoint endpoint, ExchangePattern pattern, Processor processor);
/**
* Sends an exchange to an endpoint using a supplied processor
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpoint the endpoint to send the exchange to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param processor the transformer used to populate the new exchange
* @param resultProcessor a processor to process the exchange when the send is complete. {@link Processor} to
* populate the exchange
* @return the returned exchange
*/
Exchange send(Endpoint endpoint, ExchangePattern pattern, Processor processor, Processor resultProcessor);
/**
* Send the body to an endpoint
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the endpoint to send the exchange to
* @param body the payload
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBody(Endpoint endpoint, Object body) throws CamelExecutionException;
/**
* Send the body to an endpoint
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send the exchange to
* @param body the payload
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBody(String endpointUri, Object body) throws CamelExecutionException;
/**
* Send the body to an endpoint with the given {@link ExchangePattern} returning any result output body
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the endpoint to send the exchange to
* @param body the payload
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @return the result if {@link ExchangePattern} is OUT capable, otherwise null
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object sendBody(Endpoint endpoint, ExchangePattern pattern, Object body) throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send the exchange to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param body the payload
* @return the result if {@link ExchangePattern} is OUT capable, otherwise null
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object sendBody(String endpointUri, ExchangePattern pattern, Object body) throws CamelExecutionException;
/**
* Sends the body to an endpoint with a specified header and header value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload to send
* @param header the header name
* @param headerValue the header value
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndHeader(String endpointUri, Object body, String header, Object headerValue) throws CamelExecutionException;
/**
* Sends the body to an endpoint with a specified header and header value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint to send to
* @param body the payload to send
* @param header the header name
* @param headerValue the header value
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue) throws CamelExecutionException;
/**
* Sends the body to an endpoint with a specified header and header value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint to send to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param body the payload to send
* @param header the header name
* @param headerValue the header value
* @return the result if {@link ExchangePattern} is OUT capable, otherwise null
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object sendBodyAndHeader(
Endpoint endpoint, ExchangePattern pattern, Object body,
String header, Object headerValue)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with a specified header and header value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint URI to send to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param body the payload to send
* @param header the header name
* @param headerValue the header value
* @return the result if {@link ExchangePattern} is OUT capable, otherwise null
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object sendBodyAndHeader(
String endpoint, ExchangePattern pattern, Object body,
String header, Object headerValue)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with a specified property and property value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload to send
* @param property the property name
* @param propertyValue the property value
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndProperty(String endpointUri, Object body, String property, Object propertyValue)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with a specified property and property value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint to send to
* @param body the payload to send
* @param property the property name
* @param propertyValue the property value
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndProperty(Endpoint endpoint, Object body, String property, Object propertyValue)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with a specified property and property value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint to send to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param body the payload to send
* @param property the property name
* @param propertyValue the property value
* @return the result if {@link ExchangePattern} is OUT capable, otherwise null
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object sendBodyAndProperty(
Endpoint endpoint, ExchangePattern pattern, Object body,
String property, Object propertyValue)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with a specified property and property value
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint URI to send to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param body the payload to send
* @param property the property name
* @param propertyValue the property value
* @return the result if {@link ExchangePattern} is OUT capable, otherwise null
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object sendBodyAndProperty(
String endpoint, ExchangePattern pattern, Object body,
String property, Object propertyValue)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with the specified headers and header values
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload to send
* @param headers headers
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndHeaders(String endpointUri, Object body, Map headers) throws CamelExecutionException;
/**
* Sends the body to an endpoint with the specified headers and header values
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the endpoint URI to send to
* @param body the payload to send
* @param headers headers
* @throws CamelExecutionException if the processing of the exchange failed
*/
void sendBodyAndHeaders(Endpoint endpoint, Object body, Map headers) throws CamelExecutionException;
/**
* Sends the body to an endpoint with the specified headers and header values
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param body the payload to send
* @param headers headers
* @return the result if {@link ExchangePattern} is OUT capable, otherwise null
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object sendBodyAndHeaders(
String endpointUri, ExchangePattern pattern, Object body,
Map headers)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with the specified headers and header values
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the endpoint URI to send to
* @param pattern the message {@link ExchangePattern} such as {@link ExchangePattern#InOnly} or
* {@link ExchangePattern#InOut}
* @param body the payload to send
* @param headers headers
* @return the result if {@link ExchangePattern} is OUT capable, otherwise null
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object sendBodyAndHeaders(
Endpoint endpoint, ExchangePattern pattern, Object body,
Map headers)
throws CamelExecutionException;
// Methods using an InOut ExchangePattern
// -----------------------------------------------------------------------
/**
* Sends an exchange to an endpoint using a supplied processor Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpoint the Endpoint to send to
* @param processor the processor which will populate the exchange before sending
* @return the result (see class javadoc)
*/
Exchange request(Endpoint endpoint, Processor processor);
/**
* Sends an exchange to an endpoint using a supplied processor Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is not thrown from this
* method, but you can access it from the returned exchange using {@link org.apache.camel.Exchange#getException()}.
*
* @param endpointUri the endpoint URI to send to
* @param processor the processor which will populate the exchange before sending
* @return the result (see class javadoc)
*/
Exchange request(String endpointUri, Processor processor);
/**
* Sends the body to the default endpoint and returns the result content Uses an {@link ExchangePattern#InOut}
* message exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param body the payload to send
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBody(Object body) throws CamelExecutionException;
/**
* Sends the body to the default endpoint and returns the result content Uses an {@link ExchangePattern#InOut}
* message exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param body the payload to send
* @param type the expected response type
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
T requestBody(Object body, Class type) throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body. Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint to send to
* @param body the payload
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBody(Endpoint endpoint, Object body) throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body. Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint to send to
* @param body the payload
* @param type the expected response type
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
T requestBody(Endpoint endpoint, Object body, Class type) throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body. Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBody(String endpointUri, Object body) throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body. Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload
* @param type the expected response type
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
T requestBody(String endpointUri, Object body, Class type) throws CamelExecutionException;
/**
* Sends the body to the default endpoint and returns the result content Uses an {@link ExchangePattern#InOut}
* message exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param body the payload
* @param header the header name
* @param headerValue the header value
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBodyAndHeader(Object body, String header, Object headerValue) throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body. Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint to send to
* @param body the payload
* @param header the header name
* @param headerValue the header value
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue)
throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body. Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the Endpoint to send to
* @param body the payload
* @param header the header name
* @param headerValue the header value
* @param type the expected response type
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
T requestBodyAndHeader(Endpoint endpoint, Object body, String header, Object headerValue, Class type)
throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body. Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload
* @param header the header name
* @param headerValue the header value
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue)
throws CamelExecutionException;
/**
* Send the body to an endpoint returning any result output body. Uses an {@link ExchangePattern#InOut} message
* exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload
* @param header the header name
* @param headerValue the header value
* @param type the expected response type
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
T requestBodyAndHeader(String endpointUri, Object body, String header, Object headerValue, Class type)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with the specified headers and header values. Uses an {@link ExchangePattern#InOut}
* message exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload to send
* @param headers headers
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBodyAndHeaders(String endpointUri, Object body, Map headers) throws CamelExecutionException;
/**
* Sends the body to an endpoint with the specified headers and header values. Uses an {@link ExchangePattern#InOut}
* message exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpointUri the endpoint URI to send to
* @param body the payload to send
* @param headers headers
* @param type the expected response type
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
T requestBodyAndHeaders(String endpointUri, Object body, Map headers, Class type)
throws CamelExecutionException;
/**
* Sends the body to an endpoint with the specified headers and header values. Uses an {@link ExchangePattern#InOut}
* message exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the endpoint URI to send to
* @param body the payload to send
* @param headers headers
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBodyAndHeaders(Endpoint endpoint, Object body, Map headers) throws CamelExecutionException;
/**
* Sends the body to the default endpoint and returns the result content Uses an {@link ExchangePattern#InOut}
* message exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param body the payload to send
* @param headers headers
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
Object requestBodyAndHeaders(Object body, Map headers) throws CamelExecutionException;
/**
* Sends the body to an endpoint with the specified headers and header values. Uses an {@link ExchangePattern#InOut}
* message exchange pattern.
*
*
* Notice: that if the processing of the exchange failed with an Exception it is thrown from this method as a
* {@link org.apache.camel.CamelExecutionException} with the caused exception wrapped.
*
* @param endpoint the endpoint URI to send to
* @param body the payload to send
* @param headers headers
* @param type the expected response type
* @return the result (see class javadoc)
* @throws CamelExecutionException if the processing of the exchange failed
*/
T requestBodyAndHeaders(Endpoint endpoint, Object body, Map headers, Class type)
throws CamelExecutionException;
// Asynchronous methods
// -----------------------------------------------------------------------
/**
* Sets a custom executor service to use for async messaging.
*
* @param executorService the executor service.
*/
void setExecutorService(ExecutorService executorService);
/**
* Sends an asynchronous exchange to the given endpoint.
*
* @param endpointUri the endpoint URI to send the exchange to
* @param exchange the exchange to send
* @return a handle to be used to get the response in the future
*/
CompletableFuture asyncSend(String endpointUri, Exchange exchange);
/**
* Sends an asynchronous exchange to the given endpoint.
*
* Important: The transformer processor is invoked by a thread from the underlying thread pool, when the task
* is running to send the exchange asynchronously. In other words mind about thread-safety when using the
* transformer processor.
*
* @param endpointUri the endpoint URI to send the exchange to
* @param processor the transformer used to populate the new exchange
* @return a handle to be used to get the response in the future
*/
CompletableFuture asyncSend(String endpointUri, Processor processor);
/**
* Sends an asynchronous body to the given endpoint. Uses an {@link ExchangePattern#InOnly} message exchange
* pattern.
*
* @param endpointUri the endpoint URI to send the exchange to
* @param body the body to send
* @return a handle to be used to get the response in the future
*/
CompletableFuture © 2015 - 2025 Weber Informatics LLC | Privacy Policy