org.apache.camel.component.file.GenericFileEndpoint Maven / Gradle / Ivy
Go to download
Show more of this group Show more artifacts with this name
Show all versions of camel-core Show documentation
Show all versions of camel-core Show documentation
The Core Camel Java DSL based router
/**
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.camel.component.file;
import java.io.IOException;
import java.lang.reflect.Method;
import java.nio.file.attribute.PosixFilePermission;
import java.util.ArrayList;
import java.util.Comparator;
import java.util.HashMap;
import java.util.HashSet;
import java.util.List;
import java.util.Map;
import java.util.Set;
import org.apache.camel.CamelContext;
import org.apache.camel.Component;
import org.apache.camel.Exchange;
import org.apache.camel.Expression;
import org.apache.camel.ExpressionIllegalSyntaxException;
import org.apache.camel.LoggingLevel;
import org.apache.camel.Message;
import org.apache.camel.Processor;
import org.apache.camel.impl.ScheduledPollEndpoint;
import org.apache.camel.processor.idempotent.MemoryIdempotentRepository;
import org.apache.camel.spi.BrowsableEndpoint;
import org.apache.camel.spi.FactoryFinder;
import org.apache.camel.spi.IdempotentRepository;
import org.apache.camel.spi.Language;
import org.apache.camel.spi.UriParam;
import org.apache.camel.util.FileUtil;
import org.apache.camel.util.IOHelper;
import org.apache.camel.util.ObjectHelper;
import org.apache.camel.util.ServiceHelper;
import org.apache.camel.util.StringHelper;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
/**
* Base class for file endpoints
*/
public abstract class GenericFileEndpoint extends ScheduledPollEndpoint implements BrowsableEndpoint {
protected static final String DEFAULT_STRATEGYFACTORY_CLASS = "org.apache.camel.component.file.strategy.GenericFileProcessStrategyFactory";
protected static final int DEFAULT_IDEMPOTENT_CACHE_SIZE = 1000;
private static final Integer CHMOD_WRITE_MASK = 02;
private static final Integer CHMOD_READ_MASK = 04;
private static final Integer CHMOD_EXECUTE_MASK = 01;
protected final Logger log = LoggerFactory.getLogger(getClass());
// common options
@UriParam(defaultValue = "true")
protected boolean autoCreate = true;
@UriParam(defaultValue = "" + FileUtil.BUFFER_SIZE)
protected int bufferSize = FileUtil.BUFFER_SIZE;
@UriParam
protected boolean flatten;
@UriParam
protected String charset;
@UriParam
protected Expression fileName;
// producer options
@UriParam(label = "producer", defaultValue = "Override")
protected GenericFileExist fileExist = GenericFileExist.Override;
@UriParam(label = "producer")
protected String tempPrefix;
@UriParam(label = "producer")
protected Expression tempFileName;
@UriParam(label = "producer", defaultValue = "true")
protected boolean eagerDeleteTargetFile = true;
@UriParam(defaultValue = "false", label = "producer")
protected boolean keepLastModified;
@UriParam(label = "producer")
protected String doneFileName;
@UriParam(label = "producer", defaultValue = "false")
protected boolean allowNullBody;
@UriParam(label = "producer")
protected String chmod;
// consumer options
@UriParam
protected GenericFileConfiguration configuration;
@UriParam(label = "consumer")
protected GenericFileProcessStrategy processStrategy;
@UriParam(label = "consumer")
protected IdempotentRepository inProgressRepository = new MemoryIdempotentRepository();
@UriParam(label = "consumer")
protected String localWorkDirectory;
@UriParam(label = "consumer", defaultValue = "false")
protected boolean startingDirectoryMustExist;
@UriParam(label = "consumer", defaultValue = "false")
protected boolean directoryMustExist;
@UriParam(label = "consumer", defaultValue = "false")
protected boolean noop;
@UriParam(label = "consumer", defaultValue = "false")
protected boolean recursive;
@UriParam(label = "consumer", defaultValue = "false")
protected boolean delete;
@UriParam(label = "consumer")
protected int maxMessagesPerPoll;
@UriParam(label = "consumer", defaultValue = "true")
protected boolean eagerMaxMessagesPerPoll = true;
@UriParam(label = "consumer", defaultValue = "" + Integer.MAX_VALUE)
protected int maxDepth = Integer.MAX_VALUE;
@UriParam(label = "consumer")
protected int minDepth;
@UriParam(label = "consumer")
protected String include;
@UriParam(label = "consumer")
protected String exclude;
@UriParam(label = "consumer")
protected Expression move;
@UriParam(label = "consumer")
protected Expression moveFailed;
@UriParam(label = "consumer")
protected Expression preMove;
@UriParam(label = "producer")
protected Expression moveExisting;
@UriParam(label = "consumer")
protected Boolean idempotent;
@UriParam(label = "consumer")
protected Expression idempotentKey;
@UriParam(label = "consumer")
protected IdempotentRepository idempotentRepository;
@UriParam(label = "consumer")
protected GenericFileFilter filter;
protected volatile AntPathMatcherGenericFileFilter antFilter;
@UriParam(label = "consumer")
protected String antInclude;
@UriParam(label = "consumer")
protected String antExclude;
@UriParam(label = "consumer")
protected Comparator> sorter;
@UriParam(label = "consumer")
protected Comparator sortBy;
@UriParam(label = "consumer", enums = "none,markerFile,fileLock,rename,changed")
protected String readLock = "none";
@UriParam(label = "consumer", defaultValue = "1000")
protected long readLockCheckInterval = 1000;
@UriParam(label = "consumer", defaultValue = "10000")
protected long readLockTimeout = 10000;
@UriParam(label = "consumer", defaultValue = "true")
protected boolean readLockMarkerFile = true;
@UriParam(label = "consumer", defaultValue = "WARN")
protected LoggingLevel readLockLoggingLevel = LoggingLevel.WARN;
@UriParam(label = "consumer", defaultValue = "1")
protected long readLockMinLength = 1;
@UriParam(label = "consumer", defaultValue = "0")
protected long readLockMinAge;
@UriParam(label = "consumer")
protected GenericFileExclusiveReadLockStrategy exclusiveReadLockStrategy;
public GenericFileEndpoint() {
}
public GenericFileEndpoint(String endpointUri, Component component) {
super(endpointUri, component);
}
public boolean isSingleton() {
return true;
}
public abstract GenericFileConsumer createConsumer(Processor processor) throws Exception;
public abstract GenericFileProducer createProducer() throws Exception;
public abstract Exchange createExchange(GenericFile file);
public abstract String getScheme();
public abstract char getFileSeparator();
public abstract boolean isAbsolute(String name);
/**
* Return the file name that will be auto-generated for the given message if
* none is provided
*/
public String getGeneratedFileName(Message message) {
return StringHelper.sanitize(message.getMessageId());
}
public GenericFileProcessStrategy getGenericFileProcessStrategy() {
if (processStrategy == null) {
processStrategy = createGenericFileStrategy();
log.debug("Using Generic file process strategy: {}", processStrategy);
}
return processStrategy;
}
/**
* This implementation will not load the file content.
* Any file locking is neither in use by this implementation..
*/
@Override
public List getExchanges() {
final List answer = new ArrayList();
GenericFileConsumer consumer = null;
try {
// create a new consumer which can poll the exchanges we want to browse
// do not provide a processor as we do some custom processing
consumer = createConsumer(null);
consumer.setCustomProcessor(new Processor() {
@Override
public void process(Exchange exchange) throws Exception {
answer.add(exchange);
}
});
// do not start scheduler, as we invoke the poll manually
consumer.setStartScheduler(false);
// start consumer
ServiceHelper.startService(consumer);
// invoke poll which performs the custom processing, so we can browse the exchanges
consumer.poll();
} catch (Exception e) {
throw ObjectHelper.wrapRuntimeCamelException(e);
} finally {
try {
ServiceHelper.stopService(consumer);
} catch (Exception e) {
log.debug("Error stopping consumer used for browsing exchanges. This exception will be ignored", e);
}
}
return answer;
}
/**
* A strategy method to lazily create the file strategy
*/
@SuppressWarnings("unchecked")
protected GenericFileProcessStrategy createGenericFileStrategy() {
Class factory = null;
try {
FactoryFinder finder = getCamelContext().getFactoryFinder("META-INF/services/org/apache/camel/component/");
log.trace("Using FactoryFinder: {}", finder);
factory = finder.findClass(getScheme(), "strategy.factory.", CamelContext.class);
} catch (ClassNotFoundException e) {
log.trace("'strategy.factory.class' not found", e);
} catch (IOException e) {
log.trace("No strategy factory defined in 'META-INF/services/org/apache/camel/component/'", e);
}
if (factory == null) {
// use default
try {
log.trace("Using ClassResolver to resolve class: {}", DEFAULT_STRATEGYFACTORY_CLASS);
factory = this.getCamelContext().getClassResolver().resolveClass(DEFAULT_STRATEGYFACTORY_CLASS);
} catch (Exception e) {
log.trace("Cannot load class: {}", DEFAULT_STRATEGYFACTORY_CLASS, e);
}
// fallback and us this class loader
try {
if (log.isTraceEnabled()) {
log.trace("Using classloader: {} to resolve class: {}", this.getClass().getClassLoader(), DEFAULT_STRATEGYFACTORY_CLASS);
}
factory = this.getCamelContext().getClassResolver().resolveClass(DEFAULT_STRATEGYFACTORY_CLASS, this.getClass().getClassLoader());
} catch (Exception e) {
if (log.isTraceEnabled()) {
log.trace("Cannot load class: {} using classloader: " + this.getClass().getClassLoader(), DEFAULT_STRATEGYFACTORY_CLASS, e);
}
}
if (factory == null) {
throw new TypeNotPresentException(DEFAULT_STRATEGYFACTORY_CLASS + " class not found", null);
}
}
try {
Method factoryMethod = factory.getMethod("createGenericFileProcessStrategy", CamelContext.class, Map.class);
Map params = getParamsAsMap();
log.debug("Parameters for Generic file process strategy {}", params);
return (GenericFileProcessStrategy) ObjectHelper.invokeMethod(factoryMethod, null, getCamelContext(), params);
} catch (NoSuchMethodException e) {
throw new TypeNotPresentException(factory.getSimpleName() + ".createGenericFileProcessStrategy method not found", e);
}
}
/**
* Chmod value must be between 000 and 777; If there is a leading digit like in 0755 we will ignore it.
*/
public boolean chmodPermissionsAreValid(String chmod) {
if (chmod == null || chmod.length() < 3 || chmod.length() > 4) {
return false;
}
String permissionsString = chmod.trim().substring(chmod.length() - 3); // if 4 digits chop off leading one
for (int i = 0; i < permissionsString.length(); i++) {
Character c = permissionsString.charAt(i);
if (!Character.isDigit(c) || Integer.parseInt(c.toString()) > 7) {
return false;
}
}
return true;
}
public Set getPermissions() {
Set permissions = new HashSet();
if (ObjectHelper.isEmpty(chmod)) {
return permissions;
}
String chmodString = chmod.substring(chmod.length() - 3); // if 4 digits chop off leading one
Integer ownerValue = Integer.parseInt(chmodString.substring(0, 1));
Integer groupValue = Integer.parseInt(chmodString.substring(1, 2));
Integer othersValue = Integer.parseInt(chmodString.substring(2, 3));
if ((ownerValue & CHMOD_WRITE_MASK) > 0) {
permissions.add(PosixFilePermission.OWNER_WRITE);
}
if ((ownerValue & CHMOD_READ_MASK) > 0) {
permissions.add(PosixFilePermission.OWNER_READ);
}
if ((ownerValue & CHMOD_EXECUTE_MASK) > 0) {
permissions.add(PosixFilePermission.OWNER_EXECUTE);
}
if ((groupValue & CHMOD_WRITE_MASK) > 0) {
permissions.add(PosixFilePermission.GROUP_WRITE);
}
if ((groupValue & CHMOD_READ_MASK) > 0) {
permissions.add(PosixFilePermission.GROUP_READ);
}
if ((groupValue & CHMOD_EXECUTE_MASK) > 0) {
permissions.add(PosixFilePermission.GROUP_EXECUTE);
}
if ((othersValue & CHMOD_WRITE_MASK) > 0) {
permissions.add(PosixFilePermission.OTHERS_WRITE);
}
if ((othersValue & CHMOD_READ_MASK) > 0) {
permissions.add(PosixFilePermission.OTHERS_READ);
}
if ((othersValue & CHMOD_EXECUTE_MASK) > 0) {
permissions.add(PosixFilePermission.OTHERS_EXECUTE);
}
return permissions;
}
public String getChmod() {
return chmod;
}
/**
* Specify the file permissions which is sent by the producer, the chmod value must be between 000 and 777;
* If there is a leading digit like in 0755 we will ignore it.
*/
public void setChmod(String chmod) throws Exception {
if (ObjectHelper.isNotEmpty(chmod) && chmodPermissionsAreValid(chmod)) {
this.chmod = chmod.trim();
} else {
throw new IllegalArgumentException("chmod option [" + chmod + "] is not valid");
}
}
public boolean isNoop() {
return noop;
}
/**
* If true, the file is not moved or deleted in any way.
* This option is good for readonly data, or for ETL type requirements.
* If noop=true, Camel will set idempotent=true as well, to avoid consuming the same files over and over again.
*/
public void setNoop(boolean noop) {
this.noop = noop;
}
public boolean isRecursive() {
return recursive;
}
/**
* If a directory, will look for files in all the sub-directories as well.
*/
public void setRecursive(boolean recursive) {
this.recursive = recursive;
}
public String getInclude() {
return include;
}
/**
* Is used to include files, if filename matches the regex pattern.
*/
public void setInclude(String include) {
this.include = include;
}
public String getExclude() {
return exclude;
}
/**
* Is used to exclude files, if filename matches the regex pattern.
*/
public void setExclude(String exclude) {
this.exclude = exclude;
}
public String getAntInclude() {
return antInclude;
}
/**
* Ant style filter inclusion.
* Multiple inclusions may be specified in comma-delimited format.
*/
public void setAntInclude(String antInclude) {
this.antInclude = antInclude;
if (this.antFilter == null) {
this.antFilter = new AntPathMatcherGenericFileFilter();
}
this.antFilter.setIncludes(antInclude);
}
public String getAntExclude() {
return antExclude;
}
/**
* Ant style filter exclusion. If both antInclude and antExclude are used, antExclude takes precedence over antInclude.
* Multiple exclusions may be specified in comma-delimited format.
*/
public void setAntExclude(String antExclude) {
this.antExclude = antExclude;
if (this.antFilter == null) {
this.antFilter = new AntPathMatcherGenericFileFilter();
}
this.antFilter.setExcludes(antExclude);
}
/**
* Sets case sensitive flag on {@link org.apache.camel.component.file.AntPathMatcherFileFilter}
*/
public void setAntFilterCaseSensitive(boolean antFilterCaseSensitive) {
if (this.antFilter == null) {
this.antFilter = new AntPathMatcherGenericFileFilter();
}
this.antFilter.setCaseSensitive(antFilterCaseSensitive);
}
public GenericFileFilter getAntFilter() {
return antFilter;
}
public boolean isDelete() {
return delete;
}
/**
* If true, the file will be deleted after it is processed successfully.
*/
public void setDelete(boolean delete) {
this.delete = delete;
}
public boolean isFlatten() {
return flatten;
}
/**
* Flatten is used to flatten the file name path to strip any leading paths, so it's just the file name.
* This allows you to consume recursively into sub-directories, but when you eg write the files to another directory
* they will be written in a single directory.
* Setting this to true on the producer enforces that any file name in CamelFileName header
* will be stripped for any leading paths.
*/
public void setFlatten(boolean flatten) {
this.flatten = flatten;
}
public Expression getMove() {
return move;
}
/**
* Expression (such as Simple Language) used to dynamically set the filename when moving it after processing.
* To move files into a .done subdirectory just enter .done.
*/
public void setMove(Expression move) {
this.move = move;
}
/**
* @see #setMove(org.apache.camel.Expression)
*/
public void setMove(String fileLanguageExpression) {
String expression = configureMoveOrPreMoveExpression(fileLanguageExpression);
this.move = createFileLanguageExpression(expression);
}
public Expression getMoveFailed() {
return moveFailed;
}
/**
* Sets the move failure expression based on Simple language.
* For example, to move files into a .error subdirectory use: .error.
* Note: When moving the files to the fail location Camel will handle the error and will not pick up the file again.
*/
public void setMoveFailed(Expression moveFailed) {
this.moveFailed = moveFailed;
}
public void setMoveFailed(String fileLanguageExpression) {
String expression = configureMoveOrPreMoveExpression(fileLanguageExpression);
this.moveFailed = createFileLanguageExpression(expression);
}
public Expression getPreMove() {
return preMove;
}
/**
* Expression (such as File Language) used to dynamically set the filename when moving it before processing.
* For example to move in-progress files into the order directory set this value to order.
*/
public void setPreMove(Expression preMove) {
this.preMove = preMove;
}
public void setPreMove(String fileLanguageExpression) {
String expression = configureMoveOrPreMoveExpression(fileLanguageExpression);
this.preMove = createFileLanguageExpression(expression);
}
public Expression getMoveExisting() {
return moveExisting;
}
/**
* Expression (such as File Language) used to compute file name to use when fileExist=Move is configured.
* To move files into a backup subdirectory just enter backup.
* This option only supports the following File Language tokens: "file:name", "file:name.ext", "file:name.noext", "file:onlyname",
* "file:onlyname.noext", "file:ext", and "file:parent". Notice the "file:parent" is not supported by the FTP component,
* as the FTP component can only move any existing files to a relative directory based on current dir as base.
*/
public void setMoveExisting(Expression moveExisting) {
this.moveExisting = moveExisting;
}
public void setMoveExisting(String fileLanguageExpression) {
String expression = configureMoveOrPreMoveExpression(fileLanguageExpression);
this.moveExisting = createFileLanguageExpression(expression);
}
public Expression getFileName() {
return fileName;
}
/**
* Use Expression such as File Language to dynamically set the filename.
* For consumers, it's used as a filename filter.
* For producers, it's used to evaluate the filename to write.
* If an expression is set, it take precedence over the CamelFileName header. (Note: The header itself can also be an Expression).
* The expression options support both String and Expression types.
* If the expression is a String type, it is always evaluated using the File Language.
* If the expression is an Expression type, the specified Expression type is used - this allows you,
* for instance, to use OGNL expressions. For the consumer, you can use it to filter filenames,
* so you can for instance consume today's file using the File Language syntax: mydata-${date:now:yyyyMMdd}.txt.
* The producers support the CamelOverruleFileName header which takes precedence over any existing CamelFileName header;
* the CamelOverruleFileName is a header that is used only once, and makes it easier as this avoids to temporary
* store CamelFileName and have to restore it afterwards.
*/
public void setFileName(Expression fileName) {
this.fileName = fileName;
}
public void setFileName(String fileLanguageExpression) {
this.fileName = createFileLanguageExpression(fileLanguageExpression);
}
public String getDoneFileName() {
return doneFileName;
}
/**
* If provided, then Camel will write a 2nd done file when the original file has been written.
* The done file will be empty. This option configures what file name to use.
* Either you can specify a fixed name. Or you can use dynamic placeholders.
* The done file will always be written in the same folder as the original file.
*
* Only ${file.name} and ${file.name.noext} is supported as dynamic placeholders.
*/
public void setDoneFileName(String doneFileName) {
this.doneFileName = doneFileName;
}
public Boolean isIdempotent() {
return idempotent != null ? idempotent : false;
}
public String getCharset() {
return charset;
}
/**
* This option is used to specify the encoding of the file.
* You can use this on the consumer, to specify the encodings of the files, which allow Camel to know the charset
* it should load the file content in case the file content is being accessed.
* Likewise when writing a file, you can use this option to specify which charset to write the file as well.
*/
public void setCharset(String charset) {
IOHelper.validateCharset(charset);
this.charset = charset;
}
protected boolean isIdempotentSet() {
return idempotent != null;
}
/**
* Option to use the Idempotent Consumer EIP pattern to let Camel skip already processed files.
* Will by default use a memory based LRUCache that holds 1000 entries. If noop=true then idempotent will be enabled
* as well to avoid consuming the same files over and over again.
*/
public void setIdempotent(Boolean idempotent) {
this.idempotent = idempotent;
}
public Expression getIdempotentKey() {
return idempotentKey;
}
/**
* To use a custom idempotent key. By default the absolute path of the file is used.
* You can use the File Language, for example to use the file name and file size, you can do:
* idempotentKey=${file:name}-${file:size}
*/
public void setIdempotentKey(Expression idempotentKey) {
this.idempotentKey = idempotentKey;
}
public void setIdempotentKey(String expression) {
this.idempotentKey = createFileLanguageExpression(expression);
}
public IdempotentRepository getIdempotentRepository() {
return idempotentRepository;
}
/**
* A pluggable repository org.apache.camel.spi.IdempotentRepository which by default use MemoryMessageIdRepository
* if none is specified and idempotent is true.
*/
public void setIdempotentRepository(IdempotentRepository idempotentRepository) {
this.idempotentRepository = idempotentRepository;
}
public GenericFileFilter getFilter() {
return filter;
}
/**
* Pluggable filter as a org.apache.camel.component.file.GenericFileFilter class.
* Will skip files if filter returns false in its accept() method.
*/
public void setFilter(GenericFileFilter filter) {
this.filter = filter;
}
public Comparator> getSorter() {
return sorter;
}
/**
* Pluggable sorter as a java.util.Comparator class.
*/
public void setSorter(Comparator> sorter) {
this.sorter = sorter;
}
public Comparator getSortBy() {
return sortBy;
}
/**
* Built-in sort by using the File Language.
* Supports nested sorts, so you can have a sort by file name and as a 2nd group sort by modified date.
*/
public void setSortBy(Comparator sortBy) {
this.sortBy = sortBy;
}
public void setSortBy(String expression) {
setSortBy(expression, false);
}
public void setSortBy(String expression, boolean reverse) {
setSortBy(GenericFileDefaultSorter.sortByFileLanguage(getCamelContext(), expression, reverse));
}
public String getTempPrefix() {
return tempPrefix;
}
/**
* This option is used to write the file using a temporary name and then, after the write is complete,
* rename it to the real name. Can be used to identify files being written and also avoid consumers
* (not using exclusive read locks) reading in progress files. Is often used by FTP when uploading big files.
*/
public void setTempPrefix(String tempPrefix) {
this.tempPrefix = tempPrefix;
// use only name as we set a prefix in from on the name
setTempFileName(tempPrefix + "${file:onlyname}");
}
public Expression getTempFileName() {
return tempFileName;
}
/**
* The same as tempPrefix option but offering a more fine grained control on the naming of the temporary filename as it uses the File Language.
*/
public void setTempFileName(Expression tempFileName) {
this.tempFileName = tempFileName;
}
public void setTempFileName(String tempFileNameExpression) {
this.tempFileName = createFileLanguageExpression(tempFileNameExpression);
}
public boolean isEagerDeleteTargetFile() {
return eagerDeleteTargetFile;
}
/**
* Whether or not to eagerly delete any existing target file.
* This option only applies when you use fileExists=Override and the tempFileName option as well.
* You can use this to disable (set it to false) deleting the target file before the temp file is written.
* For example you may write big files and want the target file to exists during the temp file is being written.
* This ensure the target file is only deleted until the very last moment, just before the temp file is being
* renamed to the target filename. This option is also used to control whether to delete any existing files when
* fileExist=Move is enabled, and an existing file exists.
* If this option copyAndDeleteOnRenameFails false, then an exception will be thrown if an existing file existed,
* if its true, then the existing file is deleted before the move operation.
*/
public void setEagerDeleteTargetFile(boolean eagerDeleteTargetFile) {
this.eagerDeleteTargetFile = eagerDeleteTargetFile;
}
public GenericFileConfiguration getConfiguration() {
if (configuration == null) {
configuration = new GenericFileConfiguration();
}
return configuration;
}
public void setConfiguration(GenericFileConfiguration configuration) {
this.configuration = configuration;
}
public GenericFileExclusiveReadLockStrategy getExclusiveReadLockStrategy() {
return exclusiveReadLockStrategy;
}
/**
* Pluggable read-lock as a org.apache.camel.component.file.GenericFileExclusiveReadLockStrategy implementation.
*/
public void setExclusiveReadLockStrategy(GenericFileExclusiveReadLockStrategy exclusiveReadLockStrategy) {
this.exclusiveReadLockStrategy = exclusiveReadLockStrategy;
}
public String getReadLock() {
return readLock;
}
/**
* Used by consumer, to only poll the files if it has exclusive read-lock on the file (i.e. the file is not in-progress or being written).
* Camel will wait until the file lock is granted.
*
* This option provides the build in strategies:
*
* - none - No read lock is in use
*
- markerFile - Camel creates a marker file (fileName.camelLock) and then holds a lock on it. This option is not available for the FTP component
*
- changed - Changed is using file length/modification timestamp to detect whether the file is currently being copied or not. Will at least use 1 sec
* to determine this, so this option cannot consume files as fast as the others, but can be more reliable as the JDK IO API cannot
* always determine whether a file is currently being used by another process. The option readLockCheckInterval can be used to set the check frequency.
* - fileLock - is for using java.nio.channels.FileLock. This option is not avail for the FTP component. This approach should be avoided when accessing
* a remote file system via a mount/share unless that file system supports distributed file locks.
* - rename - rename is for using a try to rename the file as a test if we can get exclusive read-lock.
*
*/
public void setReadLock(String readLock) {
this.readLock = readLock;
}
public long getReadLockCheckInterval() {
return readLockCheckInterval;
}
/**
* Interval in millis for the read-lock, if supported by the read lock.
* This interval is used for sleeping between attempts to acquire the read lock.
* For example when using the changed read lock, you can set a higher interval period to cater for slow writes.
* The default of 1 sec. may be too fast if the producer is very slow writing the file.
*
* Notice: For FTP the default readLockCheckInterval is 5000.
*
* The readLockTimeout value must be higher than readLockCheckInterval, but a rule of thumb is to have a timeout
* that is at least 2 or more times higher than the readLockCheckInterval. This is needed to ensure that amble
* time is allowed for the read lock process to try to grab the lock before the timeout was hit.
*/
public void setReadLockCheckInterval(long readLockCheckInterval) {
this.readLockCheckInterval = readLockCheckInterval;
}
public long getReadLockTimeout() {
return readLockTimeout;
}
/**
* Optional timeout in millis for the read-lock, if supported by the read-lock.
* If the read-lock could not be granted and the timeout triggered, then Camel will skip the file.
* At next poll Camel, will try the file again, and this time maybe the read-lock could be granted.
* Use a value of 0 or lower to indicate forever. Currently fileLock, changed and rename support the timeout.
*
* Notice: For FTP the default readLockTimeout value is 20000 instead of 10000.
*
* The readLockTimeout value must be higher than readLockCheckInterval, but a rule of thumb is to have a timeout
* that is at least 2 or more times higher than the readLockCheckInterval. This is needed to ensure that amble
* time is allowed for the read lock process to try to grab the lock before the timeout was hit.
*/
public void setReadLockTimeout(long readLockTimeout) {
this.readLockTimeout = readLockTimeout;
}
public boolean isReadLockMarkerFile() {
return readLockMarkerFile;
}
/**
* Whether to use marker file with the changed, rename, or exclusive read lock types.
* By default a marker file is used as well to guard against other processes picking up the same files.
* This behavior can be turned off by setting this option to false.
* For example if you do not want to write marker files to the file systems by the Camel application.
*/
public void setReadLockMarkerFile(boolean readLockMarkerFile) {
this.readLockMarkerFile = readLockMarkerFile;
}
public LoggingLevel getReadLockLoggingLevel() {
return readLockLoggingLevel;
}
/**
* Logging level used when a read lock could not be acquired.
* By default a WARN is logged. You can change this level, for example to OFF to not have any logging.
* This option is only applicable for readLock of types: changed, fileLock, rename.
*/
public void setReadLockLoggingLevel(LoggingLevel readLockLoggingLevel) {
this.readLockLoggingLevel = readLockLoggingLevel;
}
public long getReadLockMinLength() {
return readLockMinLength;
}
/**
* This option applied only for readLock=changed. This option allows you to configure a minimum file length.
* By default Camel expects the file to contain data, and thus the default value is 1.
* You can set this option to zero, to allow consuming zero-length files.
*/
public void setReadLockMinLength(long readLockMinLength) {
this.readLockMinLength = readLockMinLength;
}
public long getReadLockMinAge() {
return readLockMinAge;
}
/**
* This option applied only for readLock=change.
* This options allows to specify a minimum age the file must be before attempting to acquire the read lock.
* For example use readLockMinAge=300s to require the file is at last 5 minutes old.
* This can speedup the changed read lock as it will only attempt to acquire files which are at least that given age.
*/
public void setReadLockMinAge(long readLockMinAge) {
this.readLockMinAge = readLockMinAge;
}
public int getBufferSize() {
return bufferSize;
}
/**
* Write buffer sized in bytes.
*/
public void setBufferSize(int bufferSize) {
if (bufferSize <= 0) {
throw new IllegalArgumentException("BufferSize must be a positive value, was " + bufferSize);
}
this.bufferSize = bufferSize;
}
public GenericFileExist getFileExist() {
return fileExist;
}
/**
* What to do if a file already exists with the same name.
*
* Override, which is the default, replaces the existing file.
*
* - Append - adds content to the existing file.
* - Fail - throws a GenericFileOperationException, indicating that there is already an existing file.
* - Ignore - silently ignores the problem and does not override the existing file, but assumes everything is okay.
* - Move - option requires to use the moveExisting option to be configured as well.
* The option eagerDeleteTargetFile can be used to control what to do if an moving the file, and there exists already an existing file,
* otherwise causing the move operation to fail.
* The Move option will move any existing files, before writing the target file.
* - TryRename Camel is only applicable if tempFileName option is in use. This allows to try renaming the file from the temporary name to the actual name,
* without doing any exists check.This check may be faster on some file systems and especially FTP servers.
*
*/
public void setFileExist(GenericFileExist fileExist) {
this.fileExist = fileExist;
}
public boolean isAutoCreate() {
return autoCreate;
}
/**
* Automatically create missing directories in the file's pathname. For the file consumer, that means creating the starting directory.
* For the file producer, it means the directory the files should be written to.
*/
public void setAutoCreate(boolean autoCreate) {
this.autoCreate = autoCreate;
}
public boolean isStartingDirectoryMustExist() {
return startingDirectoryMustExist;
}
/**
* Whether the starting directory must exist. Mind that the autoCreate option is default enabled,
* which means the starting directory is normally auto created if it doesn't exist.
* You can disable autoCreate and enable this to ensure the starting directory must exist. Will thrown an exception if the directory doesn't exist.
*/
public void setStartingDirectoryMustExist(boolean startingDirectoryMustExist) {
this.startingDirectoryMustExist = startingDirectoryMustExist;
}
public boolean isDirectoryMustExist() {
return directoryMustExist;
}
/**
* Similar to startingDirectoryMustExist but this applies during polling recursive sub directories.
*/
public void setDirectoryMustExist(boolean directoryMustExist) {
this.directoryMustExist = directoryMustExist;
}
public GenericFileProcessStrategy getProcessStrategy() {
return processStrategy;
}
/**
* A pluggable org.apache.camel.component.file.GenericFileProcessStrategy allowing you to implement your own readLock option or similar.
* Can also be used when special conditions must be met before a file can be consumed, such as a special ready file exists.
* If this option is set then the readLock option does not apply.
*/
public void setProcessStrategy(GenericFileProcessStrategy processStrategy) {
this.processStrategy = processStrategy;
}
public String getLocalWorkDirectory() {
return localWorkDirectory;
}
/**
* When consuming, a local work directory can be used to store the remote file content directly in local files,
* to avoid loading the content into memory. This is beneficial, if you consume a very big remote file and thus can conserve memory.
*/
public void setLocalWorkDirectory(String localWorkDirectory) {
this.localWorkDirectory = localWorkDirectory;
}
public int getMaxMessagesPerPoll() {
return maxMessagesPerPoll;
}
/**
* Tlo define a maximum messages to gather per poll.
* By default no maximum is set. Can be used to set a limit of e.g. 1000 to avoid when starting up the server that there are thousands of files.
* Set a value of 0 or negative to disabled it.
* Notice: If this option is in use then the File and FTP components will limit before any sorting.
* For example if you have 100000 files and use maxMessagesPerPoll=500, then only the first 500 files will be picked up, and then sorted.
* You can use the eagerMaxMessagesPerPoll option and set this to false to allow to scan all files first and then sort afterwards.
*/
public void setMaxMessagesPerPoll(int maxMessagesPerPoll) {
this.maxMessagesPerPoll = maxMessagesPerPoll;
}
public boolean isEagerMaxMessagesPerPoll() {
return eagerMaxMessagesPerPoll;
}
/**
* Allows for controlling whether the limit from maxMessagesPerPoll is eager or not.
* If eager then the limit is during the scanning of files. Where as false would scan all files, and then perform sorting.
* Setting this option to false allows for sorting all files first, and then limit the poll. Mind that this requires a
* higher memory usage as all file details are in memory to perform the sorting.
*/
public void setEagerMaxMessagesPerPoll(boolean eagerMaxMessagesPerPoll) {
this.eagerMaxMessagesPerPoll = eagerMaxMessagesPerPoll;
}
public int getMaxDepth() {
return maxDepth;
}
/**
* The maximum depth to traverse when recursively processing a directory.
*/
public void setMaxDepth(int maxDepth) {
this.maxDepth = maxDepth;
}
public int getMinDepth() {
return minDepth;
}
/**
* The minimum depth to start processing when recursively processing a directory.
* Using minDepth=1 means the base directory. Using minDepth=2 means the first sub directory.
*/
public void setMinDepth(int minDepth) {
this.minDepth = minDepth;
}
public IdempotentRepository getInProgressRepository() {
return inProgressRepository;
}
/**
* A pluggable in-progress repository org.apache.camel.spi.IdempotentRepository.
* The in-progress repository is used to account the current in progress files being consumed. By default a memory based repository is used.
*/
public void setInProgressRepository(IdempotentRepository inProgressRepository) {
this.inProgressRepository = inProgressRepository;
}
public boolean isKeepLastModified() {
return keepLastModified;
}
/**
* Will keep the last modified timestamp from the source file (if any).
* Will use the Exchange.FILE_LAST_MODIFIED header to located the timestamp.
* This header can contain either a java.util.Date or long with the timestamp.
* If the timestamp exists and the option is enabled it will set this timestamp on the written file.
* Note: This option only applies to the file producer. You cannot use this option with any of the ftp producers.
*/
public void setKeepLastModified(boolean keepLastModified) {
this.keepLastModified = keepLastModified;
}
public boolean isAllowNullBody() {
return allowNullBody;
}
/**
* Used to specify if a null body is allowed during file writing.
* If set to true then an empty file will be created, when set to false, and attempting to send a null body to the file component,
* a GenericFileWriteException of 'Cannot write null body to file.' will be thrown.
* If the `fileExist` option is set to 'Override', then the file will be truncated, and if set to `append` the file will remain unchanged.
*/
public void setAllowNullBody(boolean allowNullBody) {
this.allowNullBody = allowNullBody;
}
/**
* Configures the given message with the file which sets the body to the
* file object.
*/
public void configureMessage(GenericFile file, Message message) {
message.setBody(file);
if (flatten) {
// when flatten the file name should not contain any paths
message.setHeader(Exchange.FILE_NAME, file.getFileNameOnly());
} else {
// compute name to set on header that should be relative to starting directory
String name = file.isAbsolute() ? file.getAbsoluteFilePath() : file.getRelativeFilePath();
// skip leading endpoint configured directory
String endpointPath = getConfiguration().getDirectory() + getFileSeparator();
// need to normalize paths to ensure we can match using startsWith
endpointPath = FileUtil.normalizePath(endpointPath);
String copyOfName = FileUtil.normalizePath(name);
if (ObjectHelper.isNotEmpty(endpointPath) && copyOfName.startsWith(endpointPath)) {
name = name.substring(endpointPath.length());
}
// adjust filename
message.setHeader(Exchange.FILE_NAME, name);
}
}
/**
* Set up the exchange properties with the options of the file endpoint
*/
public void configureExchange(Exchange exchange) {
// Now we just set the charset property here
if (getCharset() != null) {
exchange.setProperty(Exchange.CHARSET_NAME, getCharset());
}
}
/**
* Strategy to configure the move, preMove, or moveExisting option based on a String input.
*
* @param expression the original string input
* @return configured string or the original if no modifications is needed
*/
protected String configureMoveOrPreMoveExpression(String expression) {
// if the expression already have ${ } placeholders then pass it unmodified
if (StringHelper.hasStartToken(expression, "simple")) {
return expression;
}
// remove trailing slash
expression = FileUtil.stripTrailingSeparator(expression);
StringBuilder sb = new StringBuilder();
// if relative then insert start with the parent folder
if (!isAbsolute(expression)) {
sb.append("${file:parent}");
sb.append(getFileSeparator());
}
// insert the directory the end user provided
sb.append(expression);
// append only the filename (file:name can contain a relative path, so we must use onlyname)
sb.append(getFileSeparator());
sb.append("${file:onlyname}");
return sb.toString();
}
protected Map getParamsAsMap() {
Map params = new HashMap();
if (isNoop()) {
params.put("noop", Boolean.toString(true));
}
if (isDelete()) {
params.put("delete", Boolean.toString(true));
}
if (move != null) {
params.put("move", move);
}
if (moveFailed != null) {
params.put("moveFailed", moveFailed);
}
if (preMove != null) {
params.put("preMove", preMove);
}
if (exclusiveReadLockStrategy != null) {
params.put("exclusiveReadLockStrategy", exclusiveReadLockStrategy);
}
if (readLock != null) {
params.put("readLock", readLock);
}
if (readLockCheckInterval > 0) {
params.put("readLockCheckInterval", readLockCheckInterval);
}
if (readLockTimeout > 0) {
params.put("readLockTimeout", readLockTimeout);
}
params.put("readLockMarkerFile", readLockMarkerFile);
params.put("readLockMinLength", readLockMinLength);
params.put("readLockLoggingLevel", readLockLoggingLevel);
params.put("readLockMinAge", readLockMinAge);
return params;
}
private Expression createFileLanguageExpression(String expression) {
Language language;
// only use file language if the name is complex (eg. using $)
if (expression.contains("$")) {
language = getCamelContext().resolveLanguage("file");
} else {
language = getCamelContext().resolveLanguage("constant");
}
return language.createExpression(expression);
}
/**
* Creates the associated name of the done file based on the given file name.
*
* This method should only be invoked if a done filename property has been set on this endpoint.
*
* @param fileName the file name
* @return name of the associated done file name
*/
protected String createDoneFileName(String fileName) {
String pattern = getDoneFileName();
ObjectHelper.notEmpty(pattern, "doneFileName", pattern);
// we only support ${file:name} or ${file:name.noext} as dynamic placeholders for done files
String path = FileUtil.onlyPath(fileName);
String onlyName = FileUtil.stripPath(fileName);
pattern = pattern.replaceFirst("\\$\\{file:name\\}", onlyName);
pattern = pattern.replaceFirst("\\$simple\\{file:name\\}", onlyName);
pattern = pattern.replaceFirst("\\$\\{file:name.noext\\}", FileUtil.stripExt(onlyName));
pattern = pattern.replaceFirst("\\$simple\\{file:name.noext\\}", FileUtil.stripExt(onlyName));
// must be able to resolve all placeholders supported
if (StringHelper.hasStartToken(pattern, "simple")) {
throw new ExpressionIllegalSyntaxException(fileName + ". Cannot resolve reminder: " + pattern);
}
String answer = pattern;
if (ObjectHelper.isNotEmpty(path) && ObjectHelper.isNotEmpty(pattern)) {
// done file must always be in same directory as the real file name
answer = path + getFileSeparator() + pattern;
}
if (getConfiguration().needToNormalize()) {
// must normalize path to cater for Windows and other OS
answer = FileUtil.normalizePath(answer);
}
return answer;
}
/**
* Is the given file a done file?
*
* This method should only be invoked if a done filename property has been set on this endpoint.
*
* @param fileName the file name
* @return true if its a done file, false otherwise
*/
protected boolean isDoneFile(String fileName) {
String pattern = getDoneFileName();
ObjectHelper.notEmpty(pattern, "doneFileName", pattern);
if (!StringHelper.hasStartToken(pattern, "simple")) {
// no tokens, so just match names directly
return pattern.equals(fileName);
}
// the static part of the pattern, is that a prefix or suffix?
// its a prefix if ${ start token is not at the start of the pattern
boolean prefix = pattern.indexOf("${") > 0;
// remove dynamic parts of the pattern so we only got the static part left
pattern = pattern.replaceFirst("\\$\\{file:name\\}", "");
pattern = pattern.replaceFirst("\\$simple\\{file:name\\}", "");
pattern = pattern.replaceFirst("\\$\\{file:name.noext\\}", "");
pattern = pattern.replaceFirst("\\$simple\\{file:name.noext\\}", "");
// must be able to resolve all placeholders supported
if (StringHelper.hasStartToken(pattern, "simple")) {
throw new ExpressionIllegalSyntaxException(fileName + ". Cannot resolve reminder: " + pattern);
}
if (prefix) {
return fileName.startsWith(pattern);
} else {
return fileName.endsWith(pattern);
}
}
@Override
protected void doStart() throws Exception {
// validate that the read lock options is valid for the process strategy
if (!"none".equals(readLock) && !"off".equals(readLock)) {
if (readLockTimeout > 0 && readLockMinAge > 0 && readLockTimeout <= readLockCheckInterval + readLockMinAge) {
throw new IllegalArgumentException("The option readLockTimeout must be higher than readLockCheckInterval + readLockMinAge"
+ ", was readLockTimeout=" + readLockTimeout + ", readLockCheckInterval+readLockMinAge=" + (readLockCheckInterval + readLockMinAge)
+ ". A good practice is to let the readLockTimeout be at least readLockMinAge + 2 times the readLockCheckInterval"
+ " to ensure that the read lock procedure has enough time to acquire the lock.");
}
if (readLockTimeout > 0 && readLockTimeout <= readLockCheckInterval) {
throw new IllegalArgumentException("The option readLockTimeout must be higher than readLockCheckInterval"
+ ", was readLockTimeout=" + readLockTimeout + ", readLockCheckInterval=" + readLockCheckInterval
+ ". A good practice is to let the readLockTimeout be at least 3 times higher than the readLockCheckInterval"
+ " to ensure that the read lock procedure has enough time to acquire the lock.");
}
}
ServiceHelper.startServices(inProgressRepository, idempotentRepository);
super.doStart();
}
@Override
protected void doStop() throws Exception {
super.doStop();
ServiceHelper.stopServices(inProgressRepository, idempotentRepository);
}
}