org.apache.geode.redis.internal.RedisConstants Maven / Gradle / Ivy
/*
* Licensed to the Apache Software Foundation (ASF) under one or more contributor license
* agreements. See the NOTICE file distributed with this work for additional information regarding
* copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the License. You may obtain a
* copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software distributed under the License
* is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
* or implied. See the License for the specific language governing permissions and limitations under
* the License.
*/
package org.apache.geode.redis.internal;
public class RedisConstants {
public static final int NUM_DEFAULT_KEYS = 3;
/*
* Responses
*/
public static final String QUIT_RESPONSE = "OK";
public static final String COMMAND_QUEUED = "QUEUED";
/*
* Error responses
*/
static final String PARSING_EXCEPTION_MESSAGE =
"The command received by GeodeRedisServer was improperly formatted";
public static final String SERVER_ERROR_MESSAGE =
"The server had an internal error please try again";
static final String SERVER_ERROR_UNKNOWN_RESPONSE = "Unkown response";
static final String SERVER_ERROR_SHUTDOWN = "The server is shutting down";
static final String ERROR_UNSUPPORTED_OPERATION_IN_TRANSACTION =
"This command is not supported within a transaction";
static final String ERROR_TRANSACTION_EXCEPTION =
"This transcation cannot be initiated, make sure the command is executed against a replicate region or your data is collocated. If you are using persistent regions, make sure transactions are enabled";
public static final String ERROR_NOT_NUMERIC = "Illegal non numeric argument";
public static final String ERROR_INVALID_ARGUMENT_UNIT_NUM =
"Either illegal non numeric argument or invalid unit" +
"(please use either km/m/ft/mi)";
public static final String ERROR_UNKOWN_COMMAND = "Unable to process unknown command";
public static final String ERROR_COMMIT_CONFLICT =
"There has been a conflict with another transaction";
public static final String ERROR_REGION_CREATION =
"This key could not be created. Gemfire does not allow certain characters to used in keys";
public static final String ERROR_UNWATCH =
"Keys cannot be watched or unwatched because GemFire watches all keys by default for transactions";
public static final String ERROR_WATCH =
"Keys cannot be watched or unwatched because GemFire watches all keys by default for transactions";
public static final String ERROR_ILLEGAL_GLOB = "Incorrect syntax for given glob regex";
public static final String ERROR_OUT_OF_RANGE = "The number provided is out of range";
public static final String ERROR_INVALID_LATLONG = "Invalid longitude-latitude pair";
public static final String ERROR_NESTED_MULTI = "The MULTI command cannot be nested";
public static final String ERROR_NAN_INF_INCR = "increment would produce NaN or Infinity";
public static final String ERROR_NO_PASS =
"Attempting to authenticate when no password has been set";
public static final String ERROR_INVALID_PWD =
"Attemping to authenticate with an invalid password";
public static final String ERROR_NOT_AUTH = "Must authenticate before sending any requests";
public static final String ERROR_ZSET_MEMBER_NOT_FOUND = "could not decode requested zset member";
public static class ArityDef {
/*
* General
*/
public static final int DBSIZE_ARITY = 0;
public static final String AUTH =
"The wrong number of arguments or syntax was provided, the format for the AUTH command is \"AUTH password\"";
public static final String DBSIZE = null;
public static final String DEL =
"The wrong number of arguments or syntax was provided, the format for the DEL command is \"DEL key [key ...]\"";
public static final String ECHO =
"The wrong number of arguments or syntax was provided, the format for the ECHO command is \"ECHO message\"";
public static final String EXISTS =
"The wrong number of arguments or syntax was provided, the format for the EXISTS command is \"EXISTS key\"";
public static final String EXPIREAT =
"The wrong number of arguments or syntax was provided, the format for the EXPIREAT command is \"EXPIREAT key timestamp\"";
public static final String EXPIRE =
"The wrong number of arguments or syntax was provided, the format for the EXPIRE command is \"EXPIRE key seconds\"";
public static final String FLUSHALL = null;
public static final String KEYS =
"The wrong number of arguments or syntax was provided, the format for the KEYS command is \"KEYS pattern\"";
public static final String PERSIST =
"The wrong number of arguments or syntax was provided, the format for the PERSIST command is \"PERSIST key\"";
public static final String PEXPIREAT =
"The wrong number of arguments or syntax was provided, the format for the PEXPIREAT command is \"PEXPIREAT key milliseconds-timestamp\"";
public static final String PEXPIRE =
"The wrong number of arguments or syntax was provided, the format for the PEXPIRE command is \"PEXPIRE key milliseconds\"";
public static final String PING = null;
public static final String PTTL =
"The wrong number of arguments or syntax was provided, the format for the PTTL command is \"PTTL key\"";
public static final String QUIT = null;
public static final String SCAN =
"The wrong number of arguments or syntax was provided, the format for the SCAN command is \"SCAN cursor [MATCH pattern] [COUNT count]\"";
public static final String SHUTDOWN = null;
public static final String TIME = null;
public static final String TTL =
"The wrong number of arguments or syntax was provided, the format for the TTL command is \"TTL key\"";
public static final String TYPE =
"The wrong number of arguments or syntax was provided, the format for the TYPE command is \"TYPE key\"";
public static final String UNKNOWN = null;
/*
* Hash
*/
public static final String HDEL =
"The wrong number of arguments or syntax was provided, the format for the HDEL command is \"HDEL key field [field ...]\"";
public static final String HEXISTS =
"The wrong number of arguments or syntax was provided, the format for the HEXISTS command is \"HEXISTS key field\"";
public static final String HGETALL =
"The wrong number of arguments or syntax was provided, the format for the HGETALL command is \"HGETALL key\"";
public static final String HGET =
"The wrong number of arguments or syntax was provided, the format for the HGET command is \"HGET key field\"";
public static final String HINCRBY =
"The wrong number of arguments or syntax was provided, the format for the HINCRBY command is \"HINCRBY key field increment\"";
public static final String HINCRBYFLOAT =
"The wrong number of arguments or syntax was provided, the format for the HINCRBYFLOAT command is \"HINCRBYFLOAT key field increment\"";
public static final String HKEYS =
"The wrong number of arguments or syntax was provided, the format for the HKEYS command is \"HKEYS key\"";
public static final String HLEN =
"The wrong number of arguments or syntax was provided, the format for the HLEN command is \"HLEN key\"";
public static final String HMGET =
"The wrong number of arguments or syntax was provided, the format for the HMGET command is \"HMGET key field [field ...]\"";
public static final String HMSET =
"The wrong number of arguments or syntax was provided, the format for the HMSET command is \"HMSET key field value [field value ...]\", or not every field is associated with a value";
public static final String HSCAN =
"The wrong number of arguments or syntax was provided, the format for the SSCAN command is \"SSCAN key cursor [MATCH pattern] [COUNT count]\"";
public static final String HSET =
"The wrong number of arguments or syntax was provided, the format for the HSET command is \"HSET key field value\"";
public static final String HSETNX =
"The wrong number of arguments or syntax was provided, the format for the HSETNX command is \"HSETNX key field value\"";
public static final String HVALS =
"The wrong number of arguments or syntax was provided, the format for the HVALS command is \"HVALS key\"";
/*
* Hll
*/
public static final String PFADD =
"The wrong number of arguments or syntax was provided, the format for the PFADD command is \"PFADD key element [element ...]\"";
public static final String PFCOUNT =
"The wrong number of arguments or syntax was provided, the format for the PFCOUNT command is \"PFCOUNT key [key ...]\"";
public static final String PFMERGE =
"The wrong number of arguments or syntax was provided, the format for the PFMERGE command is \"PFMERGE destkey sourcekey [sourcekey ...]\"";
/*
* List
*/
public static final String LINDEX =
"The wrong number of arguments or syntax was provided, the format for the LINDEX command is \"LINDEX key index";
public static final String LINSERT = null;
public static final String LLEN =
"The wrong number of arguments or syntax was provided, the format for the LLEN command is \"LLEN key";
public static final String LPOP =
"The wrong number of arguments or syntax was provided, the format for the LPOP command is \"LPOP key";
public static final String LPUSH =
"The wrong number of arguments or syntax was provided, the format for the LPUSH command is \"LPUSH key value [value ...]";
public static final String LPUSHX =
"The wrong number of arguments or syntax was provided, the format for the LPUSHX command is \"LPUSHX key value";
public static final String LRANGE =
"The wrong number of arguments or syntax was provided, the format for the LRANGE command is \"LRANGE key start stop\"";
public static final String LREM =
"The wrong number of arguments or syntax was provided, the format for the LREM command is \"LREM key count value\"";
public static final String LSET =
"The wrong number of arguments or syntax was provided, the format for the LSET command is \"LSET key index value\"";
public static final String LTRIM =
"The wrong number of arguments or syntax was provided, the format for the LTRIM command is \"LTRIM key start stop\"";
public static final String RPOP =
"The wrong number of arguments or syntax was provided, the format for the RPOP command is \"RPOP key";
public static final String RPUSH =
"The wrong number of arguments or syntax was provided, the format for the RPUSH command is \"RPUSH key value [value ...]";
public static final String RPUSHX =
"The wrong number of arguments or syntax was provided, the format for the RPUSHX command is \"RPUSHX key value";
/*
* Set
*/
public static final String SADD =
"The wrong number of arguments or syntax was provided, the format for the SADD command is \"SADD key member [member ...]\"";
public static final String SCARD =
"The wrong number of arguments or syntax was provided, the format for the SCARD command is \"SCARD key\"";
public static final String SDIFF =
"The wrong number of arguments or syntax was provided, the format for the SDIFF command is \"SDIFF key [key ...]\"";
public static final String SDIFFSTORE =
"The wrong number of arguments or syntax was provided, the format for the SDIFF command is \"SDIFFSTORE destination key [key ...]\"";
public static final String SINTER =
"The wrong number of arguments or syntax was provided, the format for the SINTER command is \"SINTER key [key ...]\"";
public static final String SINTERSTORE =
"The wrong number of arguments or syntax was provided, the format for the SINTERSTORE command is \"SINTERSTORE destination key [key ...]\"";
public static final String SISMEMBER =
"The wrong number of arguments or syntax was provided, the format for the SISMEMBER command is \"SISMEMBER key member\"";
public static final String SMEMBERS =
"The wrong number of arguments or syntax was provided, the format for the SMEMBERS command is \"SMEMBERS key\"";
public static final String SMOVE =
"The wrong number of arguments or syntax was provided, the format for the SMOVE command is \"SMOVE source destination member\"";
public static final String SPOP =
"The wrong number of arguments or syntax was provided, the format for the SPOP command is \"SPOP key\"";
public static final String SRANDMEMBER =
"The wrong number of arguments or syntax was provided, the format for the SRANDMEMBER command is \"SRANDMEMBER key [count]\"";
public static final String SREM =
"The wrong number of arguments or syntax was provided, the format for the SREM command is \"SREM key member [member ...]\"";
public static final String SSCAN =
"The wrong number of arguments or syntax was provided, the format for the SSCAN command is \"SSCAN key cursor [MATCH pattern] [COUNT count]\"";
public static final String SUNION =
"The wrong number of arguments or syntax was provided, the format for the SUNION command is \"SUNION key [key ...]\"";
public static final String SUNIONSTORE =
"The wrong number of arguments or syntax was provided, the format for the SUNIONSTORE command is \"SUNIONSTORE destination key [key ...]\"";
/*
* Sorted set
*/
public static final String ZADD =
"The wrong number of arguments or syntax was provided, the format for the ZADD command is \"ZADD key score member [score member ...]\", or not every score matches to a member";
public static final String ZCARD =
"The wrong number of arguments or syntax was provided, the format for the ZCARD command is \"ZCARD key\"";
public static final String ZCOUNT =
"The wrong number of arguments or syntax was provided, the format for the ZCOUNT command is \"ZCOUNT key min max\"";
public static final String ZINCRBY =
"The wrong number of arguments or syntax was provided, the format for the ZINCRBY command is \"ZINCRBY key increment member\"";
public static final String ZLEXCOUNT =
"The wrong number of arguments or syntax was provided, the format for the ZLEXCOUNT command is \"ZLEXCOUNT key min max\"";
public static final String ZRANGEBYLEX =
"The wrong number of arguments or syntax was provided, the format for the ZRANGEBYLEX command is \"ZRANGEBYLEX key min max [LIMIT offset count]\"";
public static final String ZRANGEBYSCORE =
"The wrong number of arguments or syntax was provided, the format for the ZRANGEBYSCORE command is \"ZRANGEBYSCORE key min max [WITHSCORES] [LIMIT offset count]\"";
public static final String ZRANGE =
"The wrong number of arguments or syntax was provided, the format for the ZRANGE command is \"ZRANGE key start stop [WITHSCORES]\"";
public static final String ZRANK =
"The wrong number of arguments or syntax was provided, the format for the ZRANK command is \"ZRANK key member\"";
public static final String ZREM =
"The wrong number of arguments or syntax was provided, the format for the ZREM command is \"ZREM key member [member ...]\"";
public static final String ZREMRANGEBYLEX =
"The wrong number of arguments or syntax was provided, the format for the ZREMRANGEBYLEX command is \"ZREMRANGEBYLEX key min max\"";
public static final String ZREMRANGEBYRANK =
"The wrong number of arguments or syntax was provided, the format for the ZREMRANGEBYRANK command is \"ZREMRANGEBYRANK key start stop\"";
public static final String ZREMRANGEBYSCORE =
"The wrong number of arguments or syntax was provided, the format for the ZREMRANGEBYSCORE command is \"ZREMRANGEBYSCORE key min max\"";
public static final String ZREVRANGEBYSCORE =
"The wrong number of arguments or syntax was provided, the format for the ZREVRANGEBYSCORE command is \"ZREVRANGEBYSCORE key max min [WITHSCORES] [LIMIT offset count]\"";
public static final String ZREVRANGE =
"The wrong number of arguments or syntax was provided, the format for the ZREVRANGE command is \"ZREVRANGE key start stop [WITHSCORES]\"";
public static final String ZREVRANK =
"The wrong number of arguments or syntax was provided, the format for the ZREVRANK command is \"ZREVRANK key member\"";
public static final String ZSCAN =
"The wrong number of arguments or syntax was provided, the format for the SSCAN command is \"SSCAN key cursor [MATCH pattern] [COUNT count]\"";
public static final String ZSCORE =
"The wrong number of arguments or syntax was provided, the format for the ZSCORE command is \"ZSCORE key member\"";
/*
* Geospatial
*/
public static final String GEOADD =
"The wrong number of arguments or syntax was provided, the format for the GEOADD command is \"GEOADD key longitude latitude member [longitude latitude member ...]\", or not every latitude/longitude pair matches to a member";
public static final String GEOHASH =
"The wrong number of arguments or syntax was provided, the format for the GEOHASH command is \"GEOHASH key member [member...]\"";
public static final String GEOPOS =
"The wrong number of arguments or syntax was provided, the format for the GEOPOS command is \"GEOPOS key member [member...]\"";
public static final String GEODIST =
"The wrong number of arguments or syntax was provided, the format for the GEODIST command is \"GEODIST key member member [unit]\"";
public static final String GEORADIUS =
"The wrong number of arguments or syntax was provided, the format for the GEORADIUS command is \"GEORADIUS key longitude latitude radius m|km|ft|mi [WITHCOORD] [WITHDIST] [WITHHASH] [COUNT count] [ASC|DESC]\"";
public static final String GEORADIUSBYMEMBER =
"The wrong number of arguments or syntax was provided, the format for the GEORADIUSBYMEMBER command is \"GEORADIUSBYMEMBER key member radius m|km|ft|mi [WITHCOORD] [WITHDIST] [WITHHASH] [COUNT count] [ASC|DESC]\"";
/*
* String
*/
public static final String APPEND =
"The wrong number of arguments or syntax was provided, the format for the APPEND command is \"APPEND key value\"";
public static final String BITCOUNT =
"The wrong number of arguments or syntax was provided, the format for the BITCOUNT command is \"BITCOUNT key [start end]\"";
public static final String BITOP =
"The wrong number of arguments or syntax was provided, the format for the BITOP command is \"BITOP operation destkey key [key ...]\"";
public static final String BITPOS =
"The wrong number of arguments or syntax was provided, the format for the BITOPS command is \"BITPOS key bit [start] [end]\"";
public static final String DECRBY =
"The wrong number of arguments or syntax was provided, the format for the DECRBY command is \"DECRRBY key decrement\"";
public static final String DECR =
"The wrong number of arguments or syntax was provided, the format for the DECR command is \"DECR key\"";
public static final String GETBIT =
"The wrong number of arguments or syntax was provided, the format for the GETBIT command is \"GETBIT key offset\"";
public static final String GETEXECUTOR =
"The wrong number of arguments or syntax was provided, the format for the GET command is \"GET key\"";
public static final String GETRANGE =
"The wrong number of arguments or syntax was provided, the format for the GETRANGE command is \"GETRANGE key start end\"";
public static final String GETSET =
"The wrong number of arguments or syntax was provided, the format for the GETSET command is \"GETSET key value\"";
public static final String INCRBY =
"The wrong number of arguments or syntax was provided, the format for the INCRBY command is \"INCRBY key increment\"";
public static final String INCRBYFLOAT =
"The wrong number of arguments or syntax was provided, the format for the INCRBY command is \"INCRBY key increment\"";
public static final String INCR =
"The wrong number of arguments or syntax was provided, the format for the INCR command is \"INCR key\"";
public static final String MGET =
"The wrong number of arguments or syntax was provided, the format for the MGET command is \"MGET key [key ...]\"";
public static final String MSET =
"The wrong number of arguments or syntax was provided, the format for the MSET command is \"MSET key value [key value ...]\", or not every key matches a value";
public static final String MSETNX =
"The wrong number of arguments or syntax was provided, the format for the MSETNX command is \"MSETNX key value [key value ...]\", or not every key matches a value";
public static final String PSETEX =
"The wrong number of arguments or syntax was provided, the format for the PSETEX command is \"PSETEX key milliseconds value\"";
public static final String SETBIT =
"The wrong number of arguments or syntax was provided, the format for the SETBIT command is \"SETBIT key offset value\"";
public static final String SET =
"The wrong number of arguments or syntax was provided, the format for the SET command is \"SET key value [EX seconds] [PX milliseconds] [NX|XX]\"";
public static final String SETEX =
"The wrong number of arguments or syntax was provided, the format for the SETEX command is \"SETEX key seconds value\"";
public static final String SETNX =
"The wrong number of arguments or syntax was provided, the format for the SETNX command is \"SETNX key value\"";
public static final String SETRANGE =
"The wrong number of arguments or syntax was provided, the format for the SETRANGE command is \"SETRANGE key offset value\"";
public static final String STRLEN =
"The wrong number of arguments or syntax was provided, the format for the STRELEN command is \"STRLEN key\"";
/*
* Transaction
*/
public static final String DISCARD = null;
public static final String EXEC = null;
public static final String MULTI = null;
public static final String UNWATCH = null;
public static final String WATCH = null;
}
}
© 2015 - 2025 Weber Informatics LLC | Privacy Policy