org.apache.openjpa.jdbc.kernel.localizer.properties Maven / Gradle / Ivy
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
error-rollback: An error occurred attempting to rollback to the savepoint "{0}"
error-save: An error occurred attempting to set the savepoint "{0}". This \
driver may not support JDBC 3 savepoints.
mult-mapping-aggregate: Cannot perform an aggregate query on a hierarchy with \
unjoined subclasses: {0}
sqlquery-missing-params: SQL query "{0}" declares a parameter index "{1}" for \
which no value was given. The given parameters were: {2}
sqlquery-fewer-params: SQL query "{0}" declares {1} distinct parameter(s), \
but only {2} parameters are given. Given parameter values are "{3}".
no-sql: You have not specified a SQL filter to execute in your SQL query.
del-ins-cycle: An unresolvable constraint cycle was detected. This typically \
means that you are persisting a new object with the same primary key value \
as an object you are deleting in the same transaction, and at the same \
time you have circular foreign key dependencies in the transaction. The \
combination of these two factors can sometimes lead to a situation in \
which OpenJPA cannot meet all the database constraints.
ref-cycle: An unresolvable constraint cycle was detected. This typically \
means that a mapping in a table other than the class'' primary table has \
a foreign key that is part of a circular foreign key dependency. OpenJPA \
sometimes cannot meet circular dependencies when some of the involved \
mappings are in secondary tables.
update-failed-no-failed-obj: Database operation failed. Update count for SQL \
statement was {0}. Statement: {1}
virtual-mapping: Cannot instantiate virtual mapping "{0}".
press-key-end: Server running. Press enter to stop.
no-server-conf: There is no persistence server configured.
server-usage: Usage: \
java org.apache.openjpa.jdbc.kernel.StartPersistenceServer\n\
\t[-properties/-p ]\n\
\t[- ]*
cant-lock-on-load: The database is unable to lock this query. Each object \
matching the query will be locked individually after it is loaded; \
however, it is technically possible that another transaction could modify \
the data before the lock is obtained. See the documentation on Object \
Locking for details.\n"{0}"
start-trans-for-lock: Though you are using optimistic transactions, OpenJPA is \
now beginning a datastore transaction because you have requested a lock \
on some data.
millis-query-timeout: JDBC locking does not support millisecond-granularity \
timeouts. Use timeouts that are multiples of 1000 for even second values.
batch-not-supported: The update count for the statement was an invalid \
value ({0}). This indicates that your database or JDBC driver does not \
have complete support for executing batch statements. Batch \
functionality should be disabled by including "BatchLimit=0" in \
your openjpa.jdbc.DBDictionary configuration property. Statement: {1}
bad-synch-mappings: Invalid SynchronizeMappings operation ("{0}") specified. \
Valid operations are: {1}
make-native-seq: Creating sequence.
drop-native-seq: Dropping sequence.
make-seq-table: Creating sequence table.
drop-seq-table: Dropping sequence table.
bad-seq-up: Attempt to update the sequence table "{0}" failed. The sequence \
table is typically created when you run the mappingtool''s refresh action \
on any datastore identity class. If you have not run the mappingtool but \
want to create the sequence table, run:\n\
java org.apache.openjpa.jdbc.kernel.TableJDBCSeq -action add
bad-seq-type: This sequence of type "{0}" cannot generate values for \
persistent type "{1}".
no-seq-sql: Error instantiating named sequence "{0}": Your database dictionary \
does not support native sequences. To tell the dictionary how to select \
sequence values, use:\n\
openjpa.jdbc.DBDictionary: NextSequenceQuery="SELECT NEXT VALUE \
FOR "{0}"\n\
Where the above string is replaced with the proper SQL for your database.
invalid-seq-sql: No rows returned for sql "{0}". Check your configuration.
insert-seq: Inserting row for this mapping into sequence table.
no-seq-row: There is no row for mapping "{0}" in sequence table "{1}", and \
the attempt to insert a row has apparently failed.
update-seq: Updating sequence values.
null-join: Attempt to add a null/empty fetch join field.
get-seq: Getting current sequence values.
seq-usage: Usage: java org.apache.openjpa.jdbc.kernel.TableJDBCSeq\n\
\t[-properties/-p ]\n\
\t[- ]*\n\
\t-action/-a [value]
clstable-seq-usage: Usage: \
java org.apache.openjpa.jdbc.kernel.ClassTableJDBCSeq\n\
\t[-properties/-p ]\n\
\t[- ]*\n\
\t-action/-a \n\
\t[class name | .java file | .class file | .jdo file] [value]
native-seq-usage: Usage: java org.apache.openjpa.jdbc.kernel.NativeJDBCSeq\n\
\t[-properties/-p ]\n\
\t[- ]*
bad-level: Invalid isolation level. Valid levels are -1, \
"none"(0), "read-uncommitted"(1), "read-committed"(2), \
"repeatable-read"(4) or "serializable"(8). Specified value: {0}.
no-nullable-fk: No nullable foreign key found to resolve circular flush \
dependency. During flush processing, changes to instances, new \
instances, and deleted instances must be processed in a specific sequence \
to avoid foreign key constraint violations. The changes required in this \
transaction cannot be reordered because none of the foreign key constraints \
is nullable (optional).
graph-not-cycle-free: A circular flush dependency has been found after all \
circular dependencies should have been resolved.
batch_limit: The batch limit is set to {0}.
batch_update_info: ExecuteBatch command returns update count {0} for \
statement {1}.
strong-exclusion: excluded permanently
weak-exclusion: excluded temporarily
prepared-query-excluded-by-user: because matches user specified exclusion \
pattern "{0}"
prepared-query-cached: Query "{0}" is cached."
prepared-query-not-cachable: Query "{0}" is not fit for caching.
prepared-query-invalidate: Query "{0}" is invalidated and removed from cache.
prepared-query-uncache: Query "{0}" is removed from cache {1}.
prepared-query-remove-pattern: Removing exclusion pattern "{0}" caused \
query to be cacheable again.
uparam-mismatch: Supplied user parameters "{1}" do not match expected \
parameters "{0}" for the prepared query "{2}".
uparam-null: No user parameter was given. Expected parameters "{0}" for the \
prepared query "{1}".
uparam-coll-size: Parameter "{0}" has a value "{1}" which is not compatible \
with the available positions {2} in the parameter list of the prepared query
uparam-no-pos: User parameter "{0}" does not appear in any position in the \
prepared query "{1}".
uparam-pc-key: Class "{0}" uses {1} primary key columns but corresponding \
positions {2} in the parameter list of the prepared query is not compatible.
uparam-missing: Parameter {0} in SQL Query "{1}" is not given a value. The \
parameters given is "{2}".
optimistic-violation-lock: An optimistic lock violation was detected when \
locking object instance.
sql-warning: The statement resulted in SQL warning: {0}
bad-fetch-mode: Invalid fetch mode. Valid values are \
"none"(0), "join"(1) or "parallel"(2). Specified value: {0}.
bad-resultset-type: Invalid result set type. Valid values are \
"forward-only"(1003), "scroll-insensitive"(1004) or \
"scroll-sensitive"(1005). Specified value: {0}.
bad-fetch-direction: Invalid fetch direction. Valid values are \
"forward"(1000), "reverse"(1001) or "unknown"(1002). Specified value: {0}.
bad-lrs-size: Invalid LRS size. Valid values are \
"unknown"(0), "last"(1) or "query"(2). Specified value: {0}.
bad-join-syntax: Invalid join syntax. Valid values are \
"sql92"(0), "tradition"(1) or "database"(2). Specified value: {0}.
exclude-multi-select: Query "{0}" is not cached because it generates multiple \
SQL statements. A query can be cached only when it corresponds to a single \
SQL statement.
exclude-not-result: Query "{0}" is not cached because it returns a single value \
rather than a list. A query that returns single value can not be cached.
exclude-no-user-object: Query "{0}" is not cached because post-execution data \
can not be extracted from this query.
exclude-no-sql: Query "{0}" is not cached because SQL statement can not be \
extracted from this query.
exclude-no-select: Query "{0}" is not cached because the internal select \
can not be extracted from this query.
exclude-not-select-rop: Query "{0}" is not cached because its result \
is not obtained by executing a select statement. This can happen \
if the query was evaluated in-memory. The result was provided by {1}.
exclude-not-executor: Query "{0}" is not cached because it was not executed on a \
data store.
exclude-externalized-param: Query "{0}" is not cached because some parameterized \
field values are externalized.
exclude-in-expression: Query "{0}" is not cached because it uses IN expression with \
variable-length parameter.
exclude-user-strategy: Query "{0}" is not cached because some parameterized \
field value depends on user-defined field strategy.
exclude-pagination: Query "{0}" is not cached because it uses pagination.
fallback-no-seq-cache: Unable to cache sequence values for sequence "{0}". \
Your application does not have permission to run an ALTER SEQUENCE \
command. Ensure that it has the appropriate permission to run an \
ALTER SEQUENCE command.
alter-seq-disabled: The property "openjpa.jdbc.DBDictionary=disableAlterSeqenceIncrementBy" \
is set to true. This means that the ''ALTER SEQUENCE...INCREMENT BY'' SQL statement \
will not be executed for sequence "{0}". OpenJPA executes this command to ensure that \
the sequence''s INCREMENT BY value defined in the database matches the allocationSize \
which is defined in the entity''s sequence. With this SQL statement disabled, it is the \
responsibility of the user to ensure that the entity''s sequence definition matches the \
sequence defined in the database.
© 2015 - 2024 Weber Informatics LLC | Privacy Policy