org.apache.hadoop.hbase.client.Scan Maven / Gradle / Ivy
/*
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.hadoop.hbase.client;
import java.io.IOException;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import java.util.NavigableSet;
import java.util.TreeMap;
import java.util.TreeSet;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
import org.apache.hadoop.hbase.classification.InterfaceAudience;
import org.apache.hadoop.hbase.classification.InterfaceStability;
import org.apache.hadoop.hbase.HConstants;
import org.apache.hadoop.hbase.client.metrics.ScanMetrics;
import org.apache.hadoop.hbase.filter.Filter;
import org.apache.hadoop.hbase.filter.IncompatibleFilterException;
import org.apache.hadoop.hbase.io.TimeRange;
import org.apache.hadoop.hbase.protobuf.ProtobufUtil;
import org.apache.hadoop.hbase.security.access.Permission;
import org.apache.hadoop.hbase.security.visibility.Authorizations;
import org.apache.hadoop.hbase.util.Bytes;
/**
* Used to perform Scan operations.
*
* All operations are identical to {@link Get} with the exception of
* instantiation. Rather than specifying a single row, an optional startRow
* and stopRow may be defined. If rows are not specified, the Scanner will
* iterate over all rows.
*
* To get all columns from all rows of a Table, create an instance with no constraints; use the
* {@link #Scan()} constructor. To constrain the scan to specific column families,
* call {@link #addFamily(byte[]) addFamily} for each family to retrieve on your Scan instance.
*
* To get specific columns, call {@link #addColumn(byte[], byte[]) addColumn}
* for each column to retrieve.
*
* To only retrieve columns within a specific range of version timestamps,
* call {@link #setTimeRange(long, long) setTimeRange}.
*
* To only retrieve columns with a specific timestamp, call
* {@link #setTimeStamp(long) setTimestamp}.
*
* To limit the number of versions of each column to be returned, call
* {@link #setMaxVersions(int) setMaxVersions}.
*
* To limit the maximum number of values returned for each call to next(),
* call {@link #setBatch(int) setBatch}.
*
* To add a filter, call {@link #setFilter(org.apache.hadoop.hbase.filter.Filter) setFilter}.
*
* Expert: To explicitly disable server-side block caching for this scan,
* execute {@link #setCacheBlocks(boolean)}.
*
Note: Usage alters Scan instances. Internally, attributes are updated as the Scan
* runs and if enabled, metrics accumulate in the Scan instance. Be aware this is the case when
* you go to clone a Scan instance or if you go to reuse a created Scan instance; safer is create
* a Scan instance per usage.
*/
@InterfaceAudience.Public
@InterfaceStability.Stable
public class Scan extends Query {
private static final Log LOG = LogFactory.getLog(Scan.class);
private static final String RAW_ATTR = "_raw_";
private byte[] startRow = HConstants.EMPTY_START_ROW;
private boolean includeStartRow = true;
private byte[] stopRow = HConstants.EMPTY_END_ROW;
private boolean includeStopRow = false;
private int maxVersions = 1;
private int batch = -1;
/**
* Partial {@link Result}s are {@link Result}s must be combined to form a complete {@link Result}.
* The {@link Result}s had to be returned in fragments (i.e. as partials) because the size of the
* cells in the row exceeded max result size on the server. Typically partial results will be
* combined client side into complete results before being delivered to the caller. However, if
* this flag is set, the caller is indicating that they do not mind seeing partial results (i.e.
* they understand that the results returned from the Scanner may only represent part of a
* particular row). In such a case, any attempt to combine the partials into a complete result on
* the client side will be skipped, and the caller will be able to see the exact results returned
* from the server.
*/
private boolean allowPartialResults = false;
private int storeLimit = -1;
private int storeOffset = 0;
private boolean getScan;
/**
* @deprecated since 1.0.0. Use {@link #setScanMetricsEnabled(boolean)}
*/
// Make private or remove.
@Deprecated
static public final String SCAN_ATTRIBUTES_METRICS_ENABLE = "scan.attributes.metrics.enable";
/**
* Use {@link #getScanMetrics()}
*/
// Make this private or remove.
@Deprecated
static public final String SCAN_ATTRIBUTES_METRICS_DATA = "scan.attributes.metrics.data";
// If an application wants to use multiple scans over different tables each scan must
// define this attribute with the appropriate table name by calling
// scan.setAttribute(Scan.SCAN_ATTRIBUTES_TABLE_NAME, Bytes.toBytes(tableName))
static public final String SCAN_ATTRIBUTES_TABLE_NAME = "scan.attributes.table.name";
/**
* @deprecated without replacement
* This is now a no-op, SEEKs and SKIPs are optimizated automatically.
* Will be removed in 2.0+
*/
@Deprecated
public static final String HINT_LOOKAHEAD = "_look_ahead_";
/*
* -1 means no caching specified and the value of {@link HConstants#HBASE_CLIENT_SCANNER_CACHING}
* (default to {@link HConstants#DEFAULT_HBASE_CLIENT_SCANNER_CACHING}) will be used
*/
private int caching = -1;
private long maxResultSize = -1;
private boolean cacheBlocks = true;
private boolean reversed = false;
private TimeRange tr = new TimeRange();
private Map> familyMap =
new TreeMap>(Bytes.BYTES_COMPARATOR);
/**
* Set it true for small scan to get better performance
*
* Small scan should use pread and big scan can use seek + read
*
* seek + read is fast but can cause two problem (1) resource contention (2)
* cause too much network io
*
* [89-fb] Using pread for non-compaction read request
* https://issues.apache.org/jira/browse/HBASE-7266
*
* On the other hand, if setting it true, we would do
* openScanner,next,closeScanner in one RPC call. It means the better
* performance for small scan. [HBASE-9488].
*
* Generally, if the scan range is within one data block(64KB), it could be
* considered as a small scan.
*/
private boolean small = false;
/**
* The mvcc read point to use when open a scanner. Remember to clear it after switching regions as
* the mvcc is only valid within region scope.
*/
private long mvccReadPoint = -1L;
/**
* The number of rows we want for this scan. We will terminate the scan if the number of return
* rows reaches this value.
*/
private int limit = -1;
/**
* Control whether to use pread at server side.
*/
private ReadType readType = ReadType.DEFAULT;
private boolean needCursorResult = false;
/**
* Create a Scan operation across all rows.
*/
public Scan() {}
/**
* @deprecated use {@code new Scan().withStartRow(startRow).setFilter(filter)} instead.
*/
@Deprecated
public Scan(byte[] startRow, Filter filter) {
this(startRow);
this.filter = filter;
}
/**
* Create a Scan operation starting at the specified row.
*
* If the specified row does not exist, the Scanner will start from the next closest row after the
* specified row.
* @param startRow row to start scanner at or after
* @deprecated use {@code new Scan().withStartRow(startRow)} instead.
*/
@Deprecated
public Scan(byte[] startRow) {
setStartRow(startRow);
}
/**
* Create a Scan operation for the range of rows specified.
* @param startRow row to start scanner at or after (inclusive)
* @param stopRow row to stop scanner before (exclusive)
* @deprecated use {@code new Scan().withStartRow(startRow).withStopRow(stopRow)} instead.
*/
@Deprecated
public Scan(byte[] startRow, byte[] stopRow) {
setStartRow(startRow);
setStopRow(stopRow);
}
/**
* Creates a new instance of this class while copying all values.
*
* @param scan The scan instance to copy from.
* @throws IOException When copying the values fails.
*/
public Scan(Scan scan) throws IOException {
startRow = scan.getStartRow();
includeStartRow = scan.includeStartRow();
stopRow = scan.getStopRow();
includeStopRow = scan.includeStopRow();
maxVersions = scan.getMaxVersions();
batch = scan.getBatch();
storeLimit = scan.getMaxResultsPerColumnFamily();
storeOffset = scan.getRowOffsetPerColumnFamily();
caching = scan.getCaching();
maxResultSize = scan.getMaxResultSize();
cacheBlocks = scan.getCacheBlocks();
getScan = scan.isGetScan();
filter = scan.getFilter(); // clone?
loadColumnFamiliesOnDemand = scan.getLoadColumnFamiliesOnDemandValue();
consistency = scan.getConsistency();
this.setIsolationLevel(scan.getIsolationLevel());
reversed = scan.isReversed();
small = scan.isSmall();
allowPartialResults = scan.getAllowPartialResults();
TimeRange ctr = scan.getTimeRange();
tr = new TimeRange(ctr.getMin(), ctr.getMax());
Map> fams = scan.getFamilyMap();
for (Map.Entry> entry : fams.entrySet()) {
byte [] fam = entry.getKey();
NavigableSet cols = entry.getValue();
if (cols != null && cols.size() > 0) {
for (byte[] col : cols) {
addColumn(fam, col);
}
} else {
addFamily(fam);
}
}
for (Map.Entry attr : scan.getAttributesMap().entrySet()) {
setAttribute(attr.getKey(), attr.getValue());
}
for (Map.Entry entry : scan.getColumnFamilyTimeRange().entrySet()) {
TimeRange tr = entry.getValue();
setColumnFamilyTimeRange(entry.getKey(), tr.getMin(), tr.getMax());
}
this.mvccReadPoint = scan.getMvccReadPoint();
this.limit = scan.getLimit();
this.needCursorResult = scan.isNeedCursorResult();
setPriority(scan.getPriority());
}
/**
* Builds a scan object with the same specs as get.
* @param get get to model scan after
*/
public Scan(Get get) {
this.startRow = get.getRow();
this.includeStartRow = true;
this.stopRow = get.getRow();
this.includeStopRow = true;
this.filter = get.getFilter();
this.cacheBlocks = get.getCacheBlocks();
this.maxVersions = get.getMaxVersions();
this.storeLimit = get.getMaxResultsPerColumnFamily();
this.storeOffset = get.getRowOffsetPerColumnFamily();
this.tr = get.getTimeRange();
this.familyMap = get.getFamilyMap();
this.getScan = true;
this.consistency = get.getConsistency();
this.setIsolationLevel(get.getIsolationLevel());
this.loadColumnFamiliesOnDemand = get.getLoadColumnFamiliesOnDemandValue();
for (Map.Entry attr : get.getAttributesMap().entrySet()) {
setAttribute(attr.getKey(), attr.getValue());
}
for (Map.Entry entry : get.getColumnFamilyTimeRange().entrySet()) {
TimeRange tr = entry.getValue();
setColumnFamilyTimeRange(entry.getKey(), tr.getMin(), tr.getMax());
}
this.mvccReadPoint = -1L;
setPriority(get.getPriority());
}
public boolean isGetScan() {
return includeStartRow && includeStopRow
&& ClientUtil.areScanStartRowAndStopRowEqual(this.startRow, this.stopRow);
}
/**
* Get all columns from the specified family.
*
* Overrides previous calls to addColumn for this family.
* @param family family name
* @return this
*/
public Scan addFamily(byte [] family) {
familyMap.remove(family);
familyMap.put(family, null);
return this;
}
/**
* Get the column from the specified family with the specified qualifier.
*
* Overrides previous calls to addFamily for this family.
* @param family family name
* @param qualifier column qualifier
* @return this
*/
public Scan addColumn(byte [] family, byte [] qualifier) {
NavigableSet set = familyMap.get(family);
if(set == null) {
set = new TreeSet(Bytes.BYTES_COMPARATOR);
familyMap.put(family, set);
}
if (qualifier == null) {
qualifier = HConstants.EMPTY_BYTE_ARRAY;
}
set.add(qualifier);
return this;
}
/**
* Get versions of columns only within the specified timestamp range,
* [minStamp, maxStamp). Note, default maximum versions to return is 1. If
* your time range spans more than one version and you want all versions
* returned, up the number of versions beyond the default.
* @param minStamp minimum timestamp value, inclusive
* @param maxStamp maximum timestamp value, exclusive
* @see #setMaxVersions()
* @see #setMaxVersions(int)
* @return this
*/
public Scan setTimeRange(long minStamp, long maxStamp) throws IOException {
tr = new TimeRange(minStamp, maxStamp);
return this;
}
/**
* Get versions of columns with the specified timestamp. Note, default maximum
* versions to return is 1. If your time range spans more than one version
* and you want all versions returned, up the number of versions beyond the
* defaut.
* @param timestamp version timestamp
* @see #setMaxVersions()
* @see #setMaxVersions(int)
* @return this
*/
public Scan setTimeStamp(long timestamp)
throws IOException {
try {
tr = new TimeRange(timestamp, timestamp+1);
} catch(Exception e) {
// This should never happen, unless integer overflow or something extremely wrong...
LOG.error("TimeRange failed, likely caused by integer overflow. ", e);
throw e;
}
return this;
}
@Override public Scan setColumnFamilyTimeRange(byte[] cf, long minStamp, long maxStamp) {
return (Scan) super.setColumnFamilyTimeRange(cf, minStamp, maxStamp);
}
/**
* Set the start row of the scan.
*
* If the specified row does not exist, the Scanner will start from the next closest row after the
* specified row.
* @param startRow row to start scanner at or after
* @return this
* @throws IllegalArgumentException if startRow does not meet criteria for a row key (when length
* exceeds {@link HConstants#MAX_ROW_LENGTH})
* @deprecated use {@link #withStartRow(byte[])} instead. This method may change the inclusive of
* the stop row to keep compatible with the old behavior.
*/
@Deprecated
public Scan setStartRow(byte[] startRow) {
withStartRow(startRow);
if (ClientUtil.areScanStartRowAndStopRowEqual(this.startRow, this.stopRow)) {
// for keeping the old behavior that a scan with the same start and stop row is a get scan.
this.includeStopRow = true;
}
return this;
}
/**
* Set the start row of the scan.
*
* If the specified row does not exist, the Scanner will start from the next closest row after the
* specified row.
* @param startRow row to start scanner at or after
* @return this
* @throws IllegalArgumentException if startRow does not meet criteria for a row key (when length
* exceeds {@link HConstants#MAX_ROW_LENGTH})
*/
public Scan withStartRow(byte[] startRow) {
return withStartRow(startRow, true);
}
/**
* Set the start row of the scan.
*
* If the specified row does not exist, or the {@code inclusive} is {@code false}, the Scanner
* will start from the next closest row after the specified row.
* @param startRow row to start scanner at or after
* @param inclusive whether we should include the start row when scan
* @return this
* @throws IllegalArgumentException if startRow does not meet criteria for a row key (when length
* exceeds {@link HConstants#MAX_ROW_LENGTH})
*/
public Scan withStartRow(byte[] startRow, boolean inclusive) {
if (Bytes.len(startRow) > HConstants.MAX_ROW_LENGTH) {
throw new IllegalArgumentException("startRow's length must be less than or equal to "
+ HConstants.MAX_ROW_LENGTH + " to meet the criteria" + " for a row key.");
}
this.startRow = startRow;
this.includeStartRow = inclusive;
return this;
}
/**
* Set the stop row of the scan.
*
* The scan will include rows that are lexicographically less than the provided stopRow.
*
* Note: When doing a filter for a rowKey Prefix use
* {@link #setRowPrefixFilter(byte[])}. The 'trailing 0' will not yield the desired result.
*
* @param stopRow row to end at (exclusive)
* @return this
* @throws IllegalArgumentException if stopRow does not meet criteria for a row key (when length
* exceeds {@link HConstants#MAX_ROW_LENGTH})
* @deprecated use {@link #withStartRow(byte[])} instead. This method may change the inclusive of
* the stop row to keep compatible with the old behavior.
*/
@Deprecated
public Scan setStopRow(byte[] stopRow) {
withStopRow(stopRow);
if (ClientUtil.areScanStartRowAndStopRowEqual(this.startRow, this.stopRow)) {
// for keeping the old behavior that a scan with the same start and stop row is a get scan.
this.includeStopRow = true;
}
return this;
}
/**
* Set the stop row of the scan.
*
* The scan will include rows that are lexicographically less than the provided stopRow.
*
* Note: When doing a filter for a rowKey Prefix use
* {@link #setRowPrefixFilter(byte[])}. The 'trailing 0' will not yield the desired result.
*
* @param stopRow row to end at (exclusive)
* @return this
* @throws IllegalArgumentException if stopRow does not meet criteria for a row key (when length
* exceeds {@link HConstants#MAX_ROW_LENGTH})
*/
public Scan withStopRow(byte[] stopRow) {
return withStopRow(stopRow, false);
}
/**
* Set the stop row of the scan.
*
* The scan will include rows that are lexicographically less than (or equal to if
* {@code inclusive} is {@code true}) the provided stopRow.
* @param stopRow row to end at
* @param inclusive whether we should include the stop row when scan
* @return this
* @throws IllegalArgumentException if stopRow does not meet criteria for a row key (when length
* exceeds {@link HConstants#MAX_ROW_LENGTH})
*/
public Scan withStopRow(byte[] stopRow, boolean inclusive) {
if (Bytes.len(stopRow) > HConstants.MAX_ROW_LENGTH) {
throw new IllegalArgumentException("stopRow's length must be less than or equal to "
+ HConstants.MAX_ROW_LENGTH + " to meet the criteria" + " for a row key.");
}
this.stopRow = stopRow;
this.includeStopRow = inclusive;
return this;
}
/**
*
Set a filter (using stopRow and startRow) so the result set only contains rows where the
* rowKey starts with the specified prefix.
* This is a utility method that converts the desired rowPrefix into the appropriate values
* for the startRow and stopRow to achieve the desired result.
* This can safely be used in combination with setFilter.
* NOTE: Doing a {@link #setStartRow(byte[])} and/or {@link #setStopRow(byte[])}
* after this method will yield undefined results.
* @param rowPrefix the prefix all rows must start with. (Set null to remove the filter.)
* @return this
*/
public Scan setRowPrefixFilter(byte[] rowPrefix) {
if (rowPrefix == null) {
setStartRow(HConstants.EMPTY_START_ROW);
setStopRow(HConstants.EMPTY_END_ROW);
} else {
this.setStartRow(rowPrefix);
this.setStopRow(ClientUtil.calculateTheClosestNextRowKeyForPrefix(rowPrefix));
}
return this;
}
/**
* Get all available versions.
* @return this
*/
public Scan setMaxVersions() {
this.maxVersions = Integer.MAX_VALUE;
return this;
}
/**
* Get up to the specified number of versions of each column.
* @param maxVersions maximum versions for each column
* @return this
*/
public Scan setMaxVersions(int maxVersions) {
this.maxVersions = maxVersions;
return this;
}
/**
* Set the maximum number of cells to return for each call to next(). Callers should be aware
* that this is not equivalent to calling {@link #setAllowPartialResults(boolean)}.
* If you don't allow partial results, the number of cells in each Result must equal to your
* batch setting unless it is the last Result for current row. So this method is helpful in paging
* queries. If you just want to prevent OOM at client, use setAllowPartialResults(true) is better.
* @param batch the maximum number of values
* @see Result#mayHaveMoreCellsInRow()
*/
public Scan setBatch(int batch) {
if (this.hasFilter() && this.filter.hasFilterRow()) {
throw new IncompatibleFilterException(
"Cannot set batch on a scan using a filter" +
" that returns true for filter.hasFilterRow");
}
this.batch = batch;
return this;
}
/**
* Set the maximum number of values to return per row per Column Family
* @param limit the maximum number of values returned / row / CF
*/
public Scan setMaxResultsPerColumnFamily(int limit) {
this.storeLimit = limit;
return this;
}
/**
* Set offset for the row per Column Family.
* @param offset is the number of kvs that will be skipped.
*/
public Scan setRowOffsetPerColumnFamily(int offset) {
this.storeOffset = offset;
return this;
}
/**
* Set the number of rows for caching that will be passed to scanners.
* If not set, the Configuration setting {@link HConstants#HBASE_CLIENT_SCANNER_CACHING} will
* apply.
* Higher caching values will enable faster scanners but will use more memory.
* @param caching the number of rows for caching
*/
public Scan setCaching(int caching) {
this.caching = caching;
return this;
}
/**
* @return the maximum result size in bytes. See {@link #setMaxResultSize(long)}
*/
public long getMaxResultSize() {
return maxResultSize;
}
/**
* Set the maximum result size. The default is -1; this means that no specific
* maximum result size will be set for this scan, and the global configured
* value will be used instead. (Defaults to unlimited).
*
* @param maxResultSize The maximum result size in bytes.
*/
public Scan setMaxResultSize(long maxResultSize) {
this.maxResultSize = maxResultSize;
return this;
}
@Override
public Scan setFilter(Filter filter) {
super.setFilter(filter);
return this;
}
/**
* Setting the familyMap
* @param familyMap map of family to qualifier
* @return this
*/
public Scan setFamilyMap(Map> familyMap) {
this.familyMap = familyMap;
return this;
}
/**
* Getting the familyMap
* @return familyMap
*/
public Map> getFamilyMap() {
return this.familyMap;
}
/**
* @return the number of families in familyMap
*/
public int numFamilies() {
if(hasFamilies()) {
return this.familyMap.size();
}
return 0;
}
/**
* @return true if familyMap is non empty, false otherwise
*/
public boolean hasFamilies() {
return !this.familyMap.isEmpty();
}
/**
* @return the keys of the familyMap
*/
public byte[][] getFamilies() {
if(hasFamilies()) {
return this.familyMap.keySet().toArray(new byte[0][0]);
}
return null;
}
/**
* @return the startrow
*/
public byte [] getStartRow() {
return this.startRow;
}
/**
* @return if we should include start row when scan
*/
public boolean includeStartRow() {
return includeStartRow;
}
/**
* @return the stoprow
*/
public byte[] getStopRow() {
return this.stopRow;
}
/**
* @return if we should include stop row when scan
*/
public boolean includeStopRow() {
return includeStopRow;
}
/**
* @return the max number of versions to fetch
*/
public int getMaxVersions() {
return this.maxVersions;
}
/**
* @return maximum number of values to return for a single call to next()
*/
public int getBatch() {
return this.batch;
}
/**
* @return maximum number of values to return per row per CF
*/
public int getMaxResultsPerColumnFamily() {
return this.storeLimit;
}
/**
* Method for retrieving the scan's offset per row per column
* family (#kvs to be skipped)
* @return row offset
*/
public int getRowOffsetPerColumnFamily() {
return this.storeOffset;
}
/**
* @return caching the number of rows fetched when calling next on a scanner
*/
public int getCaching() {
return this.caching;
}
/**
* @return TimeRange
*/
public TimeRange getTimeRange() {
return this.tr;
}
/**
* @return RowFilter
*/
@Override
public Filter getFilter() {
return filter;
}
/**
* @return true is a filter has been specified, false if not
*/
public boolean hasFilter() {
return filter != null;
}
/**
* Set whether blocks should be cached for this Scan.
*
* This is true by default. When true, default settings of the table and
* family are used (this will never override caching blocks if the block
* cache is disabled for that family or entirely).
*
* @param cacheBlocks if false, default settings are overridden and blocks
* will not be cached
*/
public Scan setCacheBlocks(boolean cacheBlocks) {
this.cacheBlocks = cacheBlocks;
return this;
}
/**
* Get whether blocks should be cached for this Scan.
* @return true if default caching should be used, false if blocks should not
* be cached
*/
public boolean getCacheBlocks() {
return cacheBlocks;
}
/**
* Set whether this scan is a reversed one
*
* This is false by default which means forward(normal) scan.
*
* @param reversed if true, scan will be backward order
* @return this
*/
public Scan setReversed(boolean reversed) {
this.reversed = reversed;
return this;
}
/**
* Get whether this scan is a reversed one.
* @return true if backward scan, false if forward(default) scan
*/
public boolean isReversed() {
return reversed;
}
/**
* Setting whether the caller wants to see the partial results when server returns
* less-than-expected cells. It is helpful while scanning a huge row to prevent OOM at client.
* By default this value is false and the complete results will be assembled client side
* before being delivered to the caller.
* @param allowPartialResults
* @return this
* @see Result#mayHaveMoreCellsInRow()
* @see #setBatch(int)
*/
public Scan setAllowPartialResults(final boolean allowPartialResults) {
this.allowPartialResults = allowPartialResults;
return this;
}
/**
* @return true when the constructor of this scan understands that the results they will see may
* only represent a partial portion of a row. The entire row would be retrieved by
* subsequent calls to {@link ResultScanner#next()}
*/
public boolean getAllowPartialResults() {
return allowPartialResults;
}
@Override
public Scan setLoadColumnFamiliesOnDemand(boolean value) {
return (Scan) super.setLoadColumnFamiliesOnDemand(value);
}
/**
* Compile the table and column family (i.e. schema) information
* into a String. Useful for parsing and aggregation by debugging,
* logging, and administration tools.
* @return Map
*/
@Override
public Map getFingerprint() {
Map map = new HashMap();
List families = new ArrayList();
if(this.familyMap.size() == 0) {
map.put("families", "ALL");
return map;
} else {
map.put("families", families);
}
for (Map.Entry> entry :
this.familyMap.entrySet()) {
families.add(Bytes.toStringBinary(entry.getKey()));
}
return map;
}
/**
* Compile the details beyond the scope of getFingerprint (row, columns,
* timestamps, etc.) into a Map along with the fingerprinted information.
* Useful for debugging, logging, and administration tools.
* @param maxCols a limit on the number of columns output prior to truncation
* @return Map
*/
@Override
public Map toMap(int maxCols) {
// start with the fingerpring map and build on top of it
Map map = getFingerprint();
// map from families to column list replaces fingerprint's list of families
Map> familyColumns =
new HashMap>();
map.put("families", familyColumns);
// add scalar information first
map.put("startRow", Bytes.toStringBinary(this.startRow));
map.put("stopRow", Bytes.toStringBinary(this.stopRow));
map.put("maxVersions", this.maxVersions);
map.put("batch", this.batch);
map.put("caching", this.caching);
map.put("maxResultSize", this.maxResultSize);
map.put("cacheBlocks", this.cacheBlocks);
map.put("loadColumnFamiliesOnDemand", this.loadColumnFamiliesOnDemand);
List timeRange = new ArrayList();
timeRange.add(this.tr.getMin());
timeRange.add(this.tr.getMax());
map.put("timeRange", timeRange);
int colCount = 0;
// iterate through affected families and list out up to maxCols columns
for (Map.Entry> entry :
this.familyMap.entrySet()) {
List columns = new ArrayList();
familyColumns.put(Bytes.toStringBinary(entry.getKey()), columns);
if(entry.getValue() == null) {
colCount++;
--maxCols;
columns.add("ALL");
} else {
colCount += entry.getValue().size();
if (maxCols <= 0) {
continue;
}
for (byte [] column : entry.getValue()) {
if (--maxCols <= 0) {
continue;
}
columns.add(Bytes.toStringBinary(column));
}
}
}
map.put("totalColumns", colCount);
if (this.filter != null) {
map.put("filter", this.filter.toString());
}
// add the id if set
if (getId() != null) {
map.put("id", getId());
}
return map;
}
/**
* Enable/disable "raw" mode for this scan.
* If "raw" is enabled the scan will return all
* delete marker and deleted rows that have not
* been collected, yet.
* This is mostly useful for Scan on column families
* that have KEEP_DELETED_ROWS enabled.
* It is an error to specify any column when "raw" is set.
* @param raw True/False to enable/disable "raw" mode.
*/
public Scan setRaw(boolean raw) {
setAttribute(RAW_ATTR, Bytes.toBytes(raw));
return this;
}
/**
* @return True if this Scan is in "raw" mode.
*/
public boolean isRaw() {
byte[] attr = getAttribute(RAW_ATTR);
return attr == null ? false : Bytes.toBoolean(attr);
}
/**
* Set whether this scan is a small scan
*
* Small scan should use pread and big scan can use seek + read
*
* seek + read is fast but can cause two problem (1) resource contention (2)
* cause too much network io
*
* [89-fb] Using pread for non-compaction read request
* https://issues.apache.org/jira/browse/HBASE-7266
*
* On the other hand, if setting it true, we would do
* openScanner,next,closeScanner in one RPC call. It means the better
* performance for small scan. [HBASE-9488].
*
* Generally, if the scan range is within one data block(64KB), it could be
* considered as a small scan.
*
* @param small
*/
public Scan setSmall(boolean small) {
this.small = small;
return this;
}
/**
* Get whether this scan is a small scan
* @return true if small scan
*/
public boolean isSmall() {
return small;
}
@Override
public Scan setAttribute(String name, byte[] value) {
return (Scan) super.setAttribute(name, value);
}
@Override
public Scan setId(String id) {
return (Scan) super.setId(id);
}
@Override
public Scan setAuthorizations(Authorizations authorizations) {
return (Scan) super.setAuthorizations(authorizations);
}
@Override
public Scan setACL(Map perms) {
return (Scan) super.setACL(perms);
}
@Override
public Scan setACL(String user, Permission perms) {
return (Scan) super.setACL(user, perms);
}
@Override
public Scan setConsistency(Consistency consistency) {
return (Scan) super.setConsistency(consistency);
}
@Override
public Scan setReplicaId(int Id) {
return (Scan) super.setReplicaId(Id);
}
@Override
public Scan setIsolationLevel(IsolationLevel level) {
return (Scan) super.setIsolationLevel(level);
}
@Override
public Scan setPriority(int priority) {
return (Scan) super.setPriority(priority);
}
/**
* Utility that creates a Scan that will do a small scan in reverse from passed row
* looking for next closest row.
* @param row
* @param family
* @return An instance of Scan primed with passed row and family to
* scan in reverse for one row only.
*/
static Scan createGetClosestRowOrBeforeReverseScan(byte[] row) {
// Below does not work if you add in family; need to add the family qualifier that is highest
// possible family qualifier. Do we have such a notion? Would have to be magic.
Scan scan = new Scan(row);
scan.setSmall(true);
scan.setReversed(true);
scan.setCaching(1);
return scan;
}
/**
* Enable collection of {@link ScanMetrics}. For advanced users.
* @param enabled Set to true to enable accumulating scan metrics
*/
public Scan setScanMetricsEnabled(final boolean enabled) {
setAttribute(Scan.SCAN_ATTRIBUTES_METRICS_ENABLE, Bytes.toBytes(Boolean.valueOf(enabled)));
return this;
}
/**
* @return True if collection of scan metrics is enabled. For advanced users.
*/
public boolean isScanMetricsEnabled() {
byte[] attr = getAttribute(Scan.SCAN_ATTRIBUTES_METRICS_ENABLE);
return attr == null ? false : Bytes.toBoolean(attr);
}
/**
* @return Metrics on this Scan, if metrics were enabled.
* @see #setScanMetricsEnabled(boolean)
* @deprecated Use {@link ResultScanner#getScanMetrics()} instead. And notice that, please do not
* use this method and {@link ResultScanner#getScanMetrics()} together, the metrics
* will be messed up.
*/
@Deprecated
public ScanMetrics getScanMetrics() {
byte[] bytes = getAttribute(Scan.SCAN_ATTRIBUTES_METRICS_DATA);
if (bytes == null) return null;
return ProtobufUtil.toScanMetrics(bytes);
}
/**
* @return the limit of rows for this scan
*/
public int getLimit() {
return limit;
}
/**
* Set the limit of rows for this scan. We will terminate the scan if the number of returned rows
* reaches this value.
*
* This condition will be tested at last, after all other conditions such as stopRow, filter, etc.
* @param limit the limit of rows for this scan
* @return this
*/
public Scan setLimit(int limit) {
this.limit = limit;
return this;
}
/**
* Call this when you only want to get one row. It will set {@code limit} to {@code 1}, and also
* set {@code readType} to {@link ReadType#PREAD}.
* @return this
*/
public Scan setOneRowLimit() {
return setLimit(1).setReadType(ReadType.PREAD);
}
@InterfaceAudience.Public
@InterfaceStability.Unstable
public enum ReadType {
DEFAULT, STREAM, PREAD
}
/**
* @return the read type for this scan
*/
public ReadType getReadType() {
return readType;
}
/**
* Set the read type for this scan.
*
* Notice that we may choose to use pread even if you specific {@link ReadType#STREAM} here. For
* example, we will always use pread if this is a get scan.
* @return this
*/
public Scan setReadType(ReadType readType) {
this.readType = readType;
return this;
}
/**
* Get the mvcc read point used to open a scanner.
*/
long getMvccReadPoint() {
return mvccReadPoint;
}
/**
* Set the mvcc read point used to open a scanner.
*/
Scan setMvccReadPoint(long mvccReadPoint) {
this.mvccReadPoint = mvccReadPoint;
return this;
}
/**
* Set the mvcc read point to -1 which means do not use it.
*/
Scan resetMvccReadPoint() {
return setMvccReadPoint(-1L);
}
/**
* When the server is slow or we scan a table with many deleted data or we use a sparse filter,
* the server will response heartbeat to prevent timeout. However the scanner will return a Result
* only when client can do it. So if there are many heartbeats, the blocking time on
* ResultScanner#next() may be very long, which is not friendly to online services.
*
* Set this to true then you can get a special Result whose #isCursor() returns true and is not
* contains any real data. It only tells you where the server has scanned. You can call next
* to continue scanning or open a new scanner with this row key as start row whenever you want.
*
* Users can get a cursor when and only when there is a response from the server but we can not
* return a Result to users, for example, this response is a heartbeat or there are partial cells
* but users do not allow partial result.
*
* Now the cursor is in row level which means the special Result will only contains a row key.
* {@link Result#isCursor()}
* {@link Result#getCursor()}
* {@link Cursor}
*/
public Scan setNeedCursorResult(boolean needCursorResult) {
this.needCursorResult = needCursorResult;
return this;
}
public boolean isNeedCursorResult() {
return needCursorResult;
}
/**
* Create a new Scan with a cursor. It only set the position information like start row key.
* The others (like cfs, stop row, limit) should still be filled in by the user.
* {@link Result#isCursor()}
* {@link Result#getCursor()}
* {@link Cursor}
*/
public static Scan createScanFromCursor(Cursor cursor) {
return new Scan().withStartRow(cursor.getRow());
}
}