org.apache.hadoop.hbase.client.Table Maven / Gradle / Ivy
/**
*
* Licensed to the Apache Software Foundation (ASF) under one
* or more contributor license agreements. See the NOTICE file
* distributed with this work for additional information
* regarding copyright ownership. The ASF licenses this file
* to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance
* with the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.hadoop.hbase.client;
import java.io.Closeable;
import java.io.IOException;
import java.util.List;
import java.util.Map;
import com.google.protobuf.Descriptors;
import com.google.protobuf.Message;
import com.google.protobuf.Service;
import com.google.protobuf.ServiceException;
import org.apache.hadoop.hbase.classification.InterfaceAudience;
import org.apache.hadoop.hbase.classification.InterfaceStability;
import org.apache.hadoop.conf.Configuration;
import org.apache.hadoop.hbase.HTableDescriptor;
import org.apache.hadoop.hbase.TableName;
import org.apache.hadoop.hbase.client.coprocessor.Batch;
import org.apache.hadoop.hbase.filter.CompareFilter;
import org.apache.hadoop.hbase.ipc.CoprocessorRpcChannel;
/**
* Used to communicate with a single HBase table.
* Obtain an instance from a {@link Connection} and call {@link #close()} afterwards.
*
* Table can be used to get, put, delete or scan data from a table.
* @see ConnectionFactory
* @see Connection
* @see Admin
* @see RegionLocator
* @since 0.99.0
*/
@InterfaceAudience.Public
@InterfaceStability.Evolving
public interface Table extends Closeable {
/**
* Gets the fully qualified table name instance of this table.
*/
TableName getName();
/**
* Returns the {@link org.apache.hadoop.conf.Configuration} object used by this instance.
*
* The reference returned is not a copy, so any change made to it will
* affect this instance.
*/
Configuration getConfiguration();
/**
* Gets the {@link org.apache.hadoop.hbase.HTableDescriptor table descriptor} for this table.
* @throws java.io.IOException if a remote or network exception occurs.
*/
HTableDescriptor getTableDescriptor() throws IOException;
/**
* Test for the existence of columns in the table, as specified by the Get.
*
*
* This will return true if the Get matches one or more keys, false if not.
*
*
* This is a server-side call so it prevents any data from being transfered to
* the client.
*
* @param get the Get
* @return true if the specified Get matches one or more keys, false if not
* @throws IOException e
*/
boolean exists(Get get) throws IOException;
/**
* Test for the existence of columns in the table, as specified by the Gets.
*
*
* This will return an array of booleans. Each value will be true if the related Get matches
* one or more keys, false if not.
*
*
* This is a server-side call so it prevents any data from being transferred to
* the client.
*
* @param gets the Gets
* @return Array of boolean. True if the specified Get matches one or more keys, false if not.
* @throws IOException e
*/
boolean[] existsAll(List gets) throws IOException;
/**
* Method that does a batch call on Deletes, Gets, Puts, Increments, Appends, RowMutations
* The ordering of execution of the actions is not defined. Meaning if you do a Put and a
* Get in the same {@link #batch} call, you will not necessarily be
* guaranteed that the Get returns what the Put had put.
*
* @param actions list of Get, Put, Delete, Increment, Append, RowMutations
* @param results Empty Object[], same size as actions. Provides access to partial
* results, in case an exception is thrown. A null in the result array means that
* the call for that action failed, even after retries
* @throws IOException
* @since 0.90.0
*/
void batch(final List actions, final Object[] results) throws IOException,
InterruptedException;
/**
* Same as {@link #batch(List, Object[])}, but returns an array of
* results instead of using a results parameter reference.
*
* @param actions list of Get, Put, Delete, Increment, Append, RowMutations
* @return the results from the actions. A null in the return array means that
* the call for that action failed, even after retries
* @throws IOException
* @since 0.90.0
* @deprecated If any exception is thrown by one of the actions, there is no way to
* retrieve the partially executed results. Use {@link #batch(List, Object[])} instead.
*/
@Deprecated
Object[] batch(final List actions) throws IOException, InterruptedException;
/**
* Same as {@link #batch(List, Object[])}, but with a callback.
* @since 0.96.0
*/
void batchCallback(
final List actions, final Object[] results, final Batch.Callback callback
)
throws IOException, InterruptedException;
/**
* Same as {@link #batch(List)}, but with a callback.
*
* @since 0.96.0
* @deprecated If any exception is thrown by one of the actions, there is no way to retrieve the
* partially executed results. Use {@link #batchCallback(List, Object[],
* org.apache.hadoop.hbase.client.coprocessor.Batch.Callback)} instead.
*/
@Deprecated
Object[] batchCallback(
List actions, Batch.Callback callback
) throws IOException,
InterruptedException;
/**
* Extracts certain cells from a given row.
* @param get The object that specifies what data to fetch and from which row.
* @return The data coming from the specified row, if it exists. If the row
* specified doesn't exist, the {@link Result} instance returned won't
* contain any {@link org.apache.hadoop.hbase.KeyValue}, as indicated by {@link Result#isEmpty()}.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
Result get(Get get) throws IOException;
/**
* Extracts certain cells from the given rows, in batch.
*
* @param gets The objects that specify what data to fetch and from which rows.
* @return The data coming from the specified rows, if it exists. If the row specified doesn't
* exist, the {@link Result} instance returned won't contain any {@link
* org.apache.hadoop.hbase.KeyValue}, as indicated by {@link Result#isEmpty()}. If there are any
* failures even after retries, there will be a null in the results array for those Gets, AND an
* exception will be thrown.
* @throws IOException if a remote or network exception occurs.
* @since 0.90.0
*/
Result[] get(List gets) throws IOException;
/**
* Returns a scanner on the current table as specified by the {@link Scan}
* object.
* Note that the passed {@link Scan}'s start row and caching properties
* maybe changed.
*
* @param scan A configured {@link Scan} object.
* @return A scanner.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
ResultScanner getScanner(Scan scan) throws IOException;
/**
* Gets a scanner on the current table for the given family.
*
* @param family The column family to scan.
* @return A scanner.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
ResultScanner getScanner(byte[] family) throws IOException;
/**
* Gets a scanner on the current table for the given family and qualifier.
*
* @param family The column family to scan.
* @param qualifier The column qualifier to scan.
* @return A scanner.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
ResultScanner getScanner(byte[] family, byte[] qualifier) throws IOException;
/**
* Puts some data in the table.
*
* @param put The data to put.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
void put(Put put) throws IOException;
/**
* Puts some data in the table, in batch.
*
* This can be used for group commit, or for submitting user defined
* batches. The writeBuffer will be periodically inspected while the List
* is processed, so depending on the List size the writeBuffer may flush
* not at all, or more than once.
* @param puts The list of mutations to apply. The batch put is done by
* aggregating the iteration of the Puts over the write buffer
* at the client-side for a single RPC call.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
void put(List puts) throws IOException;
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the put. If the passed value is null, the check
* is for the lack of column (ie: non-existance)
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param value the expected value
* @param put data to put if check succeeds
* @throws IOException e
* @return true if the new put was executed, false otherwise
*/
boolean checkAndPut(byte[] row, byte[] family, byte[] qualifier,
byte[] value, Put put) throws IOException;
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the put. If the passed value is null, the check
* is for the lack of column (ie: non-existance)
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param compareOp comparison operator to use
* @param value the expected value
* @param put data to put if check succeeds
* @throws IOException e
* @return true if the new put was executed, false otherwise
*/
boolean checkAndPut(byte[] row, byte[] family, byte[] qualifier,
CompareFilter.CompareOp compareOp, byte[] value, Put put) throws IOException;
/**
* Deletes the specified cells/row.
*
* @param delete The object that specifies what to delete.
* @throws IOException if a remote or network exception occurs.
* @since 0.20.0
*/
void delete(Delete delete) throws IOException;
/**
* Deletes the specified cells/rows in bulk.
* @param deletes List of things to delete. List gets modified by this
* method (in particular it gets re-ordered, so the order in which the elements
* are inserted in the list gives no guarantee as to the order in which the
* {@link Delete}s are executed).
* @throws IOException if a remote or network exception occurs. In that case
* the {@code deletes} argument will contain the {@link Delete} instances
* that have not be successfully applied.
* @since 0.20.1
*/
void delete(List deletes) throws IOException;
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the delete. If the passed value is null, the
* check is for the lack of column (ie: non-existance)
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param value the expected value
* @param delete data to delete if check succeeds
* @throws IOException e
* @return true if the new delete was executed, false otherwise
*/
boolean checkAndDelete(byte[] row, byte[] family, byte[] qualifier,
byte[] value, Delete delete) throws IOException;
/**
* Atomically checks if a row/family/qualifier value matches the expected
* value. If it does, it adds the delete. If the passed value is null, the
* check is for the lack of column (ie: non-existance)
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param compareOp comparison operator to use
* @param value the expected value
* @param delete data to delete if check succeeds
* @throws IOException e
* @return true if the new delete was executed, false otherwise
*/
boolean checkAndDelete(byte[] row, byte[] family, byte[] qualifier,
CompareFilter.CompareOp compareOp, byte[] value, Delete delete) throws IOException;
/**
* Performs multiple mutations atomically on a single row. Currently
* {@link Put} and {@link Delete} are supported.
*
* @param rm object that specifies the set of mutations to perform atomically
* @throws IOException
*/
void mutateRow(final RowMutations rm) throws IOException;
/**
* Appends values to one or more columns within a single row.
*
* This operation guaranteed atomicity to readers. Appends are done
* under a single row lock, so write operations to a row are synchronized, and
* readers are guaranteed to see this operation fully completed.
*
* @param append object that specifies the columns and amounts to be used
* for the increment operations
* @throws IOException e
* @return values of columns after the append operation (maybe null)
*/
Result append(final Append append) throws IOException;
/**
* Increments one or more columns within a single row.
*
* This operation ensures atomicity to readers. Increments are done
* under a single row lock, so write operations to a row are synchronized, and
* readers are guaranteed to see this operation fully completed.
*
* @param increment object that specifies the columns and amounts to be used
* for the increment operations
* @throws IOException e
* @return values of columns after the increment
*/
Result increment(final Increment increment) throws IOException;
/**
* See {@link #incrementColumnValue(byte[], byte[], byte[], long, Durability)}
*
* The {@link Durability} is defaulted to {@link Durability#SYNC_WAL}.
* @param row The row that contains the cell to increment.
* @param family The column family of the cell to increment.
* @param qualifier The column qualifier of the cell to increment.
* @param amount The amount to increment the cell with (or decrement, if the
* amount is negative).
* @return The new value, post increment.
* @throws IOException if a remote or network exception occurs.
*/
long incrementColumnValue(byte[] row, byte[] family, byte[] qualifier,
long amount) throws IOException;
/**
* Atomically increments a column value. If the column value already exists
* and is not a big-endian long, this could throw an exception. If the column
* value does not yet exist it is initialized to amount and
* written to the specified column.
*
*
Setting durability to {@link Durability#SKIP_WAL} means that in a fail
* scenario you will lose any increments that have not been flushed.
* @param row The row that contains the cell to increment.
* @param family The column family of the cell to increment.
* @param qualifier The column qualifier of the cell to increment.
* @param amount The amount to increment the cell with (or decrement, if the
* amount is negative).
* @param durability The persistence guarantee for this increment.
* @return The new value, post increment.
* @throws IOException if a remote or network exception occurs.
*/
long incrementColumnValue(byte[] row, byte[] family, byte[] qualifier,
long amount, Durability durability) throws IOException;
/**
* Releases any resources held or pending changes in internal buffers.
*
* @throws IOException if a remote or network exception occurs.
*/
@Override
void close() throws IOException;
/**
* Creates and returns a {@link com.google.protobuf.RpcChannel} instance connected to the
* table region containing the specified row. The row given does not actually have
* to exist. Whichever region would contain the row based on start and end keys will
* be used. Note that the {@code row} parameter is also not passed to the
* coprocessor handler registered for this protocol, unless the {@code row}
* is separately passed as an argument in the service request. The parameter
* here is only used to locate the region used to handle the call.
*
*
* The obtained {@link com.google.protobuf.RpcChannel} instance can be used to access a published
* coprocessor {@link com.google.protobuf.Service} using standard protobuf service invocations:
*
*
*
*
* CoprocessorRpcChannel channel = myTable.coprocessorService(rowkey);
* MyService.BlockingInterface service = MyService.newBlockingStub(channel);
* MyCallRequest request = MyCallRequest.newBuilder()
* ...
* .build();
* MyCallResponse response = service.myCall(null, request);
*
*
* @param row The row key used to identify the remote region location
* @return A CoprocessorRpcChannel instance
*/
CoprocessorRpcChannel coprocessorService(byte[] row);
/**
* Creates an instance of the given {@link com.google.protobuf.Service} subclass for each table
* region spanning the range from the {@code startKey} row to {@code endKey} row (inclusive), and
* invokes the passed {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} method
* with each {@link com.google.protobuf.Service} instance.
*
* @param service the protocol buffer {@code Service} implementation to call
* @param startKey start region selection with region containing this row. If {@code null}, the
* selection will start with the first table region.
* @param endKey select regions up to and including the region containing this row. If {@code
* null}, selection will continue through the last table region.
* @param callable this instance's {@link org.apache.hadoop.hbase.client.coprocessor.Batch
* .Call#call}
* method will be invoked once per table region, using the {@link com.google.protobuf.Service}
* instance connected to that region.
* @param the {@link com.google.protobuf.Service} subclass to connect to
* @param Return type for the {@code callable} parameter's {@link
* org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} method
* @return a map of result values keyed by region name
*/
Map coprocessorService(final Class service,
byte[] startKey, byte[] endKey, final Batch.Call callable)
throws ServiceException, Throwable;
/**
* Creates an instance of the given {@link com.google.protobuf.Service} subclass for each table
* region spanning the range from the {@code startKey} row to {@code endKey} row (inclusive), and
* invokes the passed {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} method
* with each {@link Service} instance.
*
* The given {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Callback#update(byte[],
* byte[], Object)} method will be called with the return value from each region's {@link
* org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} invocation.
*
* @param service the protocol buffer {@code Service} implementation to call
* @param startKey start region selection with region containing this row. If {@code null}, the
* selection will start with the first table region.
* @param endKey select regions up to and including the region containing this row. If {@code
* null}, selection will continue through the last table region.
* @param callable this instance's {@link org.apache.hadoop.hbase.client.coprocessor.Batch
* .Call#call}
* method will be invoked once per table region, using the {@link Service} instance connected to
* that region.
* @param callback
* @param the {@link Service} subclass to connect to
* @param Return type for the {@code callable} parameter's {@link
* org.apache.hadoop.hbase.client.coprocessor.Batch.Call#call} method
*/
void coprocessorService(final Class service,
byte[] startKey, byte[] endKey, final Batch.Call callable,
final Batch.Callback callback) throws ServiceException, Throwable;
/**
* Returns the maximum size in bytes of the write buffer for this HTable.
*
* The default value comes from the configuration parameter
* {@code hbase.client.write.buffer}.
* @return The size of the write buffer in bytes.
* @deprecated as of 1.0.1 (should not have been in 1.0.0). Replaced by {@link BufferedMutator#getWriteBufferSize()}
*/
@Deprecated
long getWriteBufferSize();
/**
* Sets the size of the buffer in bytes.
*
* If the new size is less than the current amount of data in the
* write buffer, the buffer gets flushed.
* @param writeBufferSize The new write buffer size, in bytes.
* @throws IOException if a remote or network exception occurs.
* @deprecated as of 1.0.1 (should not have been in 1.0.0). Replaced by {@link BufferedMutator} and
* {@link BufferedMutatorParams#writeBufferSize(long)}
*/
@Deprecated
void setWriteBufferSize(long writeBufferSize) throws IOException;
/**
* Creates an instance of the given {@link com.google.protobuf.Service} subclass for each table
* region spanning the range from the {@code startKey} row to {@code endKey} row (inclusive), all
* the invocations to the same region server will be batched into one call. The coprocessor
* service is invoked according to the service instance, method name and parameters.
*
* @param methodDescriptor
* the descriptor for the protobuf service method to call.
* @param request
* the method call parameters
* @param startKey
* start region selection with region containing this row. If {@code null}, the
* selection will start with the first table region.
* @param endKey
* select regions up to and including the region containing this row. If {@code null},
* selection will continue through the last table region.
* @param responsePrototype
* the proto type of the response of the method in Service.
* @param
* the response type for the coprocessor Service method
* @throws ServiceException
* @throws Throwable
* @return a map of result values keyed by region name
*/
Map batchCoprocessorService(
Descriptors.MethodDescriptor methodDescriptor, Message request,
byte[] startKey, byte[] endKey, R responsePrototype) throws ServiceException, Throwable;
/**
* Creates an instance of the given {@link com.google.protobuf.Service} subclass for each table
* region spanning the range from the {@code startKey} row to {@code endKey} row (inclusive), all
* the invocations to the same region server will be batched into one call. The coprocessor
* service is invoked according to the service instance, method name and parameters.
*
*
* The given
* {@link org.apache.hadoop.hbase.client.coprocessor.Batch.Callback#update(byte[],byte[],Object)}
* method will be called with the return value from each region's invocation.
*
*
* @param methodDescriptor
* the descriptor for the protobuf service method to call.
* @param request
* the method call parameters
* @param startKey
* start region selection with region containing this row. If {@code null}, the
* selection will start with the first table region.
* @param endKey
* select regions up to and including the region containing this row. If {@code null},
* selection will continue through the last table region.
* @param responsePrototype
* the proto type of the response of the method in Service.
* @param callback
* callback to invoke with the response for each region
* @param
* the response type for the coprocessor Service method
* @throws ServiceException
* @throws Throwable
*/
void batchCoprocessorService(Descriptors.MethodDescriptor methodDescriptor,
Message request, byte[] startKey, byte[] endKey, R responsePrototype,
Batch.Callback callback) throws ServiceException, Throwable;
/**
* Atomically checks if a row/family/qualifier value matches the expected value.
* If it does, it performs the row mutations. If the passed value is null, the check
* is for the lack of column (ie: non-existence)
*
* @param row to check
* @param family column family to check
* @param qualifier column qualifier to check
* @param compareOp the comparison operator
* @param value the expected value
* @param mutation mutations to perform if check succeeds
* @throws IOException e
* @return true if the new put was executed, false otherwise
*/
boolean checkAndMutate(byte[] row, byte[] family, byte[] qualifier,
CompareFilter.CompareOp compareOp, byte[] value, RowMutations mutation) throws IOException;
/**
* Set timeout (millisecond) of each operation in this Table instance, will override the value
* of hbase.client.operation.timeout in configuration.
* Operation timeout is a top-level restriction that makes sure a blocking method will not be
* blocked more than this. In each operation, if rpc request fails because of timeout or
* other reason, it will retry until success or throw a RetriesExhaustedException. But if the
* total time being blocking reach the operation timeout before retries exhausted, it will break
* early and throw SocketTimeoutException.
* @param operationTimeout the total timeout of each operation in millisecond.
*/
public void setOperationTimeout(int operationTimeout);
/**
* Get timeout (millisecond) of each operation for in Table instance.
*/
public int getOperationTimeout();
/**
* Get timeout (millisecond) of each rpc request in this Table instance.
*
* @returns Currently configured read timeout
* @deprecated Use getReadRpcTimeout or getWriteRpcTimeout instead
*/
@Deprecated
int getRpcTimeout();
/**
* Set timeout (millisecond) of each rpc request in operations of this Table instance, will
* override the value of hbase.rpc.timeout in configuration.
* If a rpc request waiting too long, it will stop waiting and send a new request to retry until
* retries exhausted or operation timeout reached.
*
* NOTE: This will set both the read and write timeout settings to the provided value.
*
* @param rpcTimeout the timeout of each rpc request in millisecond.
*
* @deprecated Use setReadRpcTimeout or setWriteRpcTimeout instead
*/
@Deprecated
void setRpcTimeout(int rpcTimeout);
/**
* Get timeout (millisecond) of each rpc read request in this Table instance.
*/
int getReadRpcTimeout();
/**
* Set timeout (millisecond) of each rpc read request in operations of this Table instance, will
* override the value of hbase.rpc.read.timeout in configuration.
* If a rpc read request waiting too long, it will stop waiting and send a new request to retry
* until retries exhausted or operation timeout reached.
*
* @param readRpcTimeout
*/
void setReadRpcTimeout(int readRpcTimeout);
/**
* Get timeout (millisecond) of each rpc write request in this Table instance.
*/
int getWriteRpcTimeout();
/**
* Set timeout (millisecond) of each rpc write request in operations of this Table instance, will
* override the value of hbase.rpc.write.timeout in configuration.
* If a rpc write request waiting too long, it will stop waiting and send a new request to retry
* until retries exhausted or operation timeout reached.
*
* @param writeRpcTimeout
*/
void setWriteRpcTimeout(int writeRpcTimeout);
}