org.apache.xmlbeans.message.properties Maven / Gradle / Ivy
##
## Copyright 2004 The Apache Software Foundation
##
## Licensed under the Apache License, Version 2.0 (the "License");
## you may not use this file except in compliance with the License.
## You may obtain a copy of the License at
##
## http://www.apache.org/licenses/LICENSE-2.0
##
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
##
# XMLBeans message properties
#
# xmlbean messages
#
message.missing.resource = \
Message property value not found: {0}
message.pattern.invalid = \
Message property value invalid: {0}
invalid.document.type = \
Document {0} is not a {1} file
cannot.load.file = \
Cannot load {0} file {1}: {2}
exception.loading.url = \
{0} exception while trying to load {1}: {2}
exception.value.not.supported.j2s = \
Could not set Java {0} type to Schema {1} type
exception.value.not.supported.s2j = \
Could not get a Java {1} type from a Schema {0} type
exception.xqrl.xpath.not.valid = \
Path expression is not selective, it creates new nodes: {0}
exception.xqrl.exception = \
XQuery engine exception: {0} for expresion: {1}
#
# xml messages
#
uniqattspec = \
Duplicate attribute: {0}
#
# schema messages
#
cvc-assess-attr = \
Schema-Validity Assessment (Attribute)
cvc-assess-attr.1.2 = \
Attribute not allowed (strict wildcard, and no definition found): {0}
cvc-assess-elt = \
Schema-Validity Assessment (Element)
cvc-assess-elt.1.1.1.3.2 = \
Element not allowed (strict wildcard, and no definition found): {0}
cvc-attribute = \
Attribute Locally Valid
cvc-attribute.1 = \
Invalid type for attribute
cvc-attribute.4 = \
The value ''{0}'' does not equal the fixed value ''{1}'' of attribute ''{2}''
#The value ''{0}'' does not equal the fixed value ''{1}''
cvc-au = \
Attribute Locally Valid (Use)
cvc-complex-type = \
Element Locally Valid (Complex Type)
cvc-complex-type.2.1 = \
Element ''{0}'' with empty content type cannot have text or element content.
cvc-complex-type.2.2 = \
Element ''{0}'' with a simple type definition cannot have element content.
cvc-complex-type.2.3 = \
Element ''{0}'' with element-only content type cannot have text content.
cvc-complex-type.2.4a = \
Expected {0,choice,1#element|1 or from type redefinition.
src-redefine.5b = \
A {0} type redefinition must extend or restrict the original definition of the type. The attribute base=''{1}'' must match the attribute name=''{2}'' of the redefined {0}.
src-redefine.6.1.1 = \
The group redefinition {0} must reference the originial definition at most once.
src-redefine.6.1.2 = \
When referencing the original group definition in the redefinition {0}, maxOccurs and minOccurs must be 1.
src-redefine.7.1 = \
The attribute group redefinition {0} must reference the original definition at most once.
src-resolve = \
{0} ''{1}'' not found.
# e.g., "element 'foo' not found."
src-resolve.a = \
Could not find {0} ''{1}''. Do you mean to refer to the {2} {3,choice,0#with that name|1#named {4}}{5,choice,0#|1# (in {6})}?
src-restriction-base-or-simpleType = \
base attribute or simpleType child
src-simple-type = \
Simple Type Definition Representation OK
src-simple-type.2a = \
Simple type restrictions must name a base type or contain a nested simple type: both were found.
src-simple-type.2b = \
Simple type restrictions must name a base type or contain a nested simple type: neither were found.
src-simple-type.3a = \
List type definitions provide either an itemType attribute or contain a nested simpleType: both were found.
src-simple-type.3b = \
List type definitions provide either an itemType attribute or contain a nested simpleType: neither were found.
src-simple-type.4 = \
Member {0}has a cyclic dependency on the union.
src-single-facet-value = \
Facet specified multiple times.
src-union-memberTypes-or-simpleTypes = \
A union type must specify at least one member type.
src-wildcard = \
Wildcard Representation OK
a-props-correct = \
Attribute Declaration Properties Correct
a-props-correct.2 = \
The {0} attribute {1} value ''{2}'' is not a valid value for {3}.
a-props-correct.3 = \
An attribute of type xs:ID is not allowed to have a default or fixed constraint.
ag-props-correct = \
Attribute Group Definition Properties Correct
ag-props-correct.2 = \
KHK: TBD
ag-props-correct.3 = \
Both {0} and {1} are xs:ID attributes; only one ID attribute is allowed on a type.
an-props-correct = \
Annotation Correct
au-props-correct = \
Attribute Use Correct
c-fields-xpaths = \
Invalid xpath value in field: {0}
c-props-correct = \
Identity-constraint Definition Properties Correct
c-props-correct.1 = \
Keyref cannot refer to another keyref.
c-props-correct.2 = \
Keyref does not have same number of fields as key
c-selector-xpath = \
Invalid xpath value in selector: {0}
cos-all-limited = \
All Group Limited
cos-all-limited.1.2a = \
An all group must have maxOccurs <= 1.
cos-all-limited.1.2b = \
An all group is only allowed at the top level of the content model.
cos-all-limited.2 = \
An all group can contain only element particles with maxOccurs <= 1
cos-applicable-facets = \
The facet ''{0}'' does not apply to the base type {1}.
cos-aw-intersect = \
Attribute Wildcard Intersection
cos-aw-union = \
Attribute Wildcard Union
cos-choice-range = \
Effective Total Range (choice)
cos-ct-derived-ok = \
Type Derivation OK (Complex)
cos-ct-extends = \
Derivation Valid (Extension)
cos-ct-extends.1.1 = \
The base complex type {0} cannot be restricted by {1} when final=''extension''.
cos-ct-extends.1.4.1 = \
This type extends a base type ''{0}'' which has simpleContent. In that case this type cannot add particles.
cos-ct-extends.1.4.2.2 = \
Cannot extend an element-only type with a mixed type or vice-versa.
cos-element-consistent = \
Type of ''{0}'' is inconsistent with another element with the same name in this content model.
cos-equiv-class = \
Substitution Group
cos-equiv-derived-ok-rec = \
Substitution Group OK (Transitive)
cos-group-emptiable = \
Particle Emptiable
cos-list-of-atomic = \
list of atomic
cos-no-circular-unions = \
no circular unions
cos-nonambig = \
Content model violates the unique particle attribution rule.
cos-ns-subset = \
Wildcard Subset
cos-particle-extend = \
Particle Valid (Extension)
cos-particle-restrict = \
Particle Valid (Restriction)
cos-particle-restrict.2 = \
Invalid Restriction. The derived content model {0} cannot restrict base content model {1}.
cos-seq-range = \
Effective Total Range (all and sequence)
cos-st-derived-ok = \
Type Derivation OK (Simple)
cos-st-restricts = \
Derivation Valid (Restriction, Simple)
cos-st-restricts.1.1 = \
Base type for this simple type restriction is not simple.
cos-st-restricts.2.1a = \
Item type for this list type is not simple.
cos-st-restricts.2.1b = \
This item type is another list type; lists of lists are not allowed.
cos-st-restricts.2.1c = \
This item type is a union containing a list; lists of lists are not allowed.
cos-st-restricts.3.1 = \
Member {0}is not simple.
cos-valid-default = \
Element Default Valid (Immediate)
cos-valid-default.2.1 = \
The {0} element cannot have a default value ''{1}'' because its type has {2} content only.
cos-valid-default.2.2.2 = \
The {0} element cannot have a {1} value ''{2}'' because it's content is mixed but not emptiable.
id-idref-idrefs-entity-entities-notation = \
For compatibility, type ''{1}'' should only be used for attributes (used for element ''{0}'').
ct-props-correct = \
Complex Type Definition Properties Correct
ct-props-correct.2 = \
The simple type ''{0}'' cannot be used as the base type of a simple content restriction. (Use extension instead.)
ct-props-correct.4 = \
Attribute with the name ''{0}'' already defined for {1}.
derivation-ok-restriction = \
Derivation Valid (Restriction, Complex)
derivation-ok-restriction.1 = \
The base type {0} cannot be restricted by {1} when final=''restriction''.
derivation-ok-restriction.2.1.1 = \
The attribute ''{0}'' cannot be modified by restriction to be prohibited or optional since it is required in the base type {1}.
derivation-ok-restriction.2.2 = \
The attribute ''{0}'' cannot be introduced by restriction since it is not allowed in the base type {1}.
derivation-ok-restriction.4.1 = \
A restriction cannot add anyAttribute when the base type does not have anyAttribute.
derivation-ok-restriction.4.2 = \
The anyAttribute namespace=''{0}'' is not a subset of the base type anyAttribute.
derivation-ok-restriction.5.1 = \
A complex type with a simple content model can only restrict a complex type with simple or mixed content model.
derivation-ok-restriction.5.1.2 = \
A type with a simple content model can only restrict a mixed content model that has skippable elements.
derivation-ok-restriction.5.2.2.1 = \
The simple content is not validly derived from the base simple content type.
derivation-ok-restriction.5.2 = \
A type with an empty content model cannot restrict a type with a simple content model.
derivation-ok-restriction.5.2.2 = \
A type with an empty content model can only restrict a content model that has skippable elements.
derivation-ok-restriction.5.3 = \
Must be a valid restriction.
derivation-ok-restriction.5.3a = \
A type with a mixed content model can only restrict another type with a mixed content model.
derivation-ok-restriction.5.3b = \
A type with element or mixed content cannot restrict an empty type.
derivation-ok-restriction.5.3c = \
A type with element or mixed content cannot restrict a simple type.
e-props-correct = \
Element Declaration Properties Correct
e-props-correct.2 = \
The ''{0}'' element {1} value ''{2}'' is not a valid value for ''{3}''
e-props-correct.4 = \
Element ''{0}'' is not a valid substitution for element ''{1}'': its type is not validly derived from element ''{1}''''s type
e-props-correct.4a = \
Element ''{0}'' is not a valid substitution for element ''{1}'' with final=''{2}''
notation-targetns-attr = \
For compatibility, NOTATION should only be used in schemas with no target namespace (attribute ''{0}'').
notation-targetns-elem = \
For compatibility, NOTATION should only be used in schemas with no target namespace (element ''{0}'').
enumeration-required-notation = \
enumeration facet value required for NOTATION
notation-facets = \
The use of {0} on datatypes derived from NOTATION (''{1}'') is deprecated.
enumeration-valid-restriction = \
Enumerated value ''{0}'' invalid: {1}
fractionDigits-totalDigits = \
fractionDigits must be less than or equal to totalDigits
fractionDigits-valid-restriction = \
Larger than prior fractionDigits.
length-minLength-maxLength = \
Cannot specify length in addition to minLength or maxLength.
length-valid-restriction = \
length valid restriction
maxExclusive-valid-restriction = \
Invalid maxExclusive restriction: {0}
maxInclusive-maxExclusive = \
maxInclusive and maxExclusive
maxInclusive-valid-restriction = \
Invalid maxInclusive restriction: {0}
maxLength-valid-restriction = \
Larger than prior maxLength.
mg-props-correct = \
Model Group Correct
mg-props-correct.2 = \
Model group ''{0}'' references itself.
mgd-props-correct = \
Model Group Definition Properties Correct
minExclusive-less-than-equal-to-maxExclusive = \
minExclusive <= maxExclusive
minExclusive-less-than-maxInclusive = \
minExclusive < maxInclusive
minExclusive-valid-restriction = \
Invalid minExclusive restriction: {0}
minInclusive-less-than-equal-to-maxInclusive = \
minInclusive <= maxInclusive
minInclusive-less-than-maxExclusive = \
minInclusive < maxExclusive
minInclusive-minExclusive = \
minInclusive and minExclusive
minInclusive-valid-restriction = \
Invalid minInclusive restriction: {0}
minLength-less-than-equal-to-maxLength = \
minLength <= maxLength
minLength-valid-restriction = \
Smaller than prior minLength.
n-props-correct = \
Notation Declaration Correct
no-xmlns = \
The name of an attribute declaration must not match ''xmlns''.
no-xsi = \
Illegal namespace for attribute declaration: {0}
enumeration-required-notation-attr = \
It is an error for NOTATION to be used directly in a schema. Only datatypes that are derived from NOTATION by specifying a value for enumeration can be used in a schema (attribute ''{0}'').
enumeration-required-notation-elem = \
It is an error for NOTATION to be used directly in a schema. Only datatypes that are derived from NOTATION by specifying a value for enumeration can be used in a schema (element ''{0}'').
p-props-correct = \
Particle Correct
p-props-correct.2.1 = \
maxOccurs must not be less than minOccurs.
p-props-correct.2.2 = \
maxOccurs must be greater than or equal to 1.
range-ok = \
Occurrence Range OK
range-ok.1 = \
Invalid Restriction. The minOccurs ({1}) for the derived {0} is less than the minOccurs ({3}) of the base {2}.
range-ok.2 = \
Invalid Restriction. The maxOccurs ({1}) for the derived {0} is greater than the maxOccurs ({3}) of the base {2}.
rcase-MapAndSum = \
Particle Derivation OK (Sequence:Choice -- MapAndSum)
rcase-MapAndSum.1 = \
Invalid Restriction. The {0} particle of the derived cannot be mapped to any one of the base ''s particles.
rcase-MapAndSum.2a = \
Invalid Restriction. The total minOccurs for the derived ''s elements ({0}) must not be less than the base ''s minOccurs ({1}).
rcase-MapAndSum.2b = \
Invalid Restriction. The total maxOccurs for the derived ''s elements ({0}) must not be greater than the base ''s maxOccurs ({1}).
rcase-NameAndTypeOK = \
Particle Restriction OK (Elt:Elt -- NameAndTypeOK)
rcase-NameAndTypeOK.1 = \
Invalid Restriction. The derived {0}''s name and namespace must match the base {1}''s name and namespace.
rcase-NameAndTypeOK.2 = \
Invalid Restriction. The derived {0} must not be nillable=''true'' when the base {1} is nillable=''false''.
rcase-NameAndTypeOK.4 = \
Invalid Restriction. The derived {0} has a fixed value of ''{1}'' which does not match the base {2}''s fixed value of ''{3}''.
rcase-NameAndTypeOK.5 = \
Invalid Restriction. The derived {0}''s identity constraints must be a subset of the base {1}''s identity constraints.
rcase-NameAndTypeOK.6 = \
Invalid Restriction. The derived {0} must block {1} when the base {1} does.
rcase-NameAndTypeOK.7a = \
Invalid Restriction. The derived type {0} is not a sub-type of the base type {1}.
rcase-NameAndTypeOK.7b = \
Invalid Restriction. The derived type {0} from base type {1} has an intermediate type {2} that is not derived by restriction.
rcase-NSCompat = \
Particle Derivation OK (Elt:Any -- NSCompat)
rcase-NSCompat.1 = \
Invalid Restriction. The namespace of the derived {0} is not valid with respect to the namespace(s) of the base {1}.
rcase-NSRecurseCheckCardinality = \
Particle Derivation OK (All/Choice/Sequence:Any -- NSRecurseCheckCardinality)
rcase-NSSubset = \
Particle Derivation OK (Any:Any -- NSSubset)
rcase-NSSubset.2 = \
Invalid Restriction. The namespace(s) of the derived field {0} are not a subset of the namespace(s) of the base field {1}.
rcase-Recurse = \
Particle Derivation OK (All:All,Sequence:Sequence -- Recurse)
rcase-Recurse.2 = \
Invalid Restriction. The following particles of the derived {0} cannot be mapped to the base {1}''s particles: {2}
rcase-Recurse.2.1 = \
Invalid Restriction. The particle {0} of the derived {1} is not a valid restriction of the non-optional particle {2} in the base {3} model.
rcase-Recurse.2.2 = \
Invalid Restriction. The following non-optional particles of the base {0} were not mapped in the derived {1}: {2}
rcase-RecurseAsIfGroup = \
Particle Derivation OK (Elt:All/Choice/Sequence -- RecurseAsIfGroup)
rcase-RecurseLax = \
Particle Derivation OK (Choice:Choice -- RecurseLax)
rcase-RecurseLax.2 = \
Invalid Restriction. The following particles of the derived cannot be mapped to the base ''s particles: {0}
rcase-RecurseUnordered = \
Particle Derivation OK (Sequence:All -- RecurseUnordered)
rcase-RecurseUnordered.2 = \
Invalid Restriction. The particle {0} in the derived cannot be mapped to an in the base .
rcase-RecurseUnordered.2.1 = \
Invalid Restriction. The particle {0} in the derived maps to more than one element in the base .
rcase-RecurseUnordered.2.2 = \
Particle Derivation OK (Sequence:All -- RecurseUnordered)
rcase-RecurseUnordered.2.2a = \
Invalid Restriction. The particle {0} in the derived has a maxOccurs greater than 1 ({1}). When restricting an with a , no can have a maxOccurs > 1.
rcase-RecurseUnordered.2.3 = \
Invalid Restriction. The particle {0} in the base must be mapped by one of the members of the derived unless it is optional (particle emptiable).
sch-props-correct = \
Schema Properties Correct
sch-props-correct.2 = \
Duplicate {0}: {1} (Original {0} found in file: {2})
st-props-correct = \
Simple Type Definition Properties Correct
st-props-correct.3 = \
Cannot restrict a final type.
st-props-correct.4.2.1 = \
Cannot derive by list a final type.
st-props-correct.4.2.2 = \
Cannot derive by union a final type.
st-restrict-facets = \
Simple Type Restriction (Facets)
totalDigits-valid-restriction = \
Larger than prior totalDigits.
w-props-correct = \
Wildcard Properties Correct
whiteSpace-valid-restriction = \
Cannot apply this whitespace facet over the previous one.
#
# datatypes
#
anyURI = \
Invalid value: {0}
base64Binary = \
Invalid value: {0}
boolean = \
Invalid boolean value ''{0}''
date = \
Invalid date value: {0}
decimal = \
Invalid decimal value: {0}
double = \
Invalid double value: {0}
duration = \
Invalid duration value: {0}
float = \
Invalid float value: {0}
hexBinary = \
Invalid hexBinary value: {0}
int = \
Invalid int value: {0}
integer = \
Invalid integer value: {0}
list = \
Invalid list value: {0}
long = \
Invalid long value: {0}
NCName = \
Invalid NCName value: {0}
NMTOKEN = \
Invalid NMTOKEN value: {0}
QName = \
Invalid QName value: {0}
union = \
Invalid union value: {0}
#
# following error codes aren't defined by the XMLSchema spec
#
cvc-complex-type.prohibited-attribute = \
Attribute is prohibited: {0}
soaparray = \
Invalid SOAP Array reference: {0} (prefix declaration not found or incorrect format)
facet-fixed = \
The facet ''{0}'' is fixed and cannot be overridden.
pattern-regex = \
The regular expression ''{0}'' is malformed: {1}
missing-name = \
The {0} must have a name.
reserved-type-name = \
Skipping definition of built-in type {0}.
# {1} may be either an attribute name ('type', 'name') or a type name ('nonNegativeInteger')
invalid-value = \
The value ''{0}'' is an invalid {1}.
# {1} may be either an attribute name ('type', 'name') or a type name ('nonNegativeInteger')
invalid-value-detail = \
The value ''{0}'' is an invalid {1}: {2}
invalid-xpath = \
Invalid xpath in identity constraint: {0}
exceeded-entity-bytes = \
Exceeded Entity dereference bytes limit, limit is {0} bytes.