org.apache.tomcat.websocket.LocalStrings.properties Maven / Gradle / Ivy
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
asyncChannelGroup.createFail=Unable to create dedicated AsynchronousChannelGroup for WebSocket clients which is required to prevent memory leaks in complex class loader environments like Jakarta EE containers
asyncChannelWrapperSecure.check.notOk=TLS handshake returned an unexpected status [{0}]
asyncChannelWrapperSecure.check.unwrap=Bytes were written to the output during a read
asyncChannelWrapperSecure.check.wrap=Bytes were consumed from the input during a write
asyncChannelWrapperSecure.closeFail=Failed to close channel cleanly
asyncChannelWrapperSecure.concurrentRead=Concurrent read operations are not permitted
asyncChannelWrapperSecure.concurrentWrite=Concurrent write operations are not permitted
asyncChannelWrapperSecure.eof=Unexpected end of stream
asyncChannelWrapperSecure.notHandshaking=Unexpected state [NOT_HANDSHAKING] during TLS handshake
asyncChannelWrapperSecure.statusUnwrap=Unexpected Status of SSLEngineResult after an unwrap() operation
asyncChannelWrapperSecure.statusWrap=Unexpected Status of SSLEngineResult after a wrap() operation
asyncChannelWrapperSecure.tooBig=The result [{0}] is too big to be expressed as an Integer
asyncChannelWrapperSecure.wrongStateRead=Flag that indicates a read is in progress was found to be false (it should have been true) when trying to complete a read operation
asyncChannelWrapperSecure.wrongStateWrite=Flag that indicates a write is in progress was found to be false (it should have been true) when trying to complete a write operation
authenticator.nullPassword=No password was provided to use for authentication
authenticator.nullUserName=No user name was provided to use for authentication
authenticator.realmMismatch=The user provided authentication realm [{0}] did not match the realm in the authentication challenge received from the server [{1}]
backgroundProcessManager.processFailed=A background process failed
caseInsensitiveKeyMap.nullKey=Null keys are not permitted
clientEndpointHolder.instanceCreationFailed=Failed to create WebSocketEndpoint
clientEndpointHolder.instanceRegistrationFailed=Failed to register Endpoint instance with the InstanceManager
digestAuthenticator.algorithm=Unable to generate request digest [{0}]
futureToSendHandler.timeout=Operation timed out after waiting [{0}] [{1}] to complete
perMessageDeflate.alreadyClosed=The transformer has been closed and may no longer be used
perMessageDeflate.deflateFailed=Failed to decompress a compressed WebSocket frame
perMessageDeflate.duplicateParameter=Duplicate definition of the [{0}] extension parameter
perMessageDeflate.invalidState=Invalid state
perMessageDeflate.invalidWindowSize=An invalid windows of [{1}] size was specified for [{0}]. Valid values are whole numbers from 8 to 15 inclusive.
perMessageDeflate.unknownParameter=An unknown extension parameter [{0}] was defined
transformerFactory.unsupportedExtension=The extension [{0}] is not supported
util.invalidMessageHandler=The message handler provided does not have an onMessage(Object) method
util.invalidType=Unable to coerce value [{0}] to type [{1}]. That type is not supported.
util.invalidValue=Value [{0}] contains delimiters
util.notToken=An illegal extension parameter was specified with name [{0}] and value [{1}]
util.unknownDecoderType=The Decoder type [{0}] is not recognized
wsFrame.alreadyResumed=Message receiving has already been resumed.
wsFrame.alreadySuspended=Message receiving has already been suspended.
wsFrame.bufferTooSmall=No async message support and buffer too small. Buffer size: [{0}], Message size: [{1}]
wsFrame.byteToLongFail=Too many bytes ([{0}]) were provided to be converted into a long
wsFrame.closed=New frame received after a close control frame
wsFrame.controlFragmented=A fragmented control frame was received but control frames may not be fragmented
wsFrame.controlNoFin=A control frame was sent that did not have the fin bit set. Control frames are not permitted to use continuation frames.
wsFrame.controlPayloadTooBig=A control frame was sent with a payload of size [{0}] which is larger than the maximum permitted of 125 bytes
wsFrame.illegalReadState=Unexpected read state [{0}]
wsFrame.invalidOpCode=A WebSocket frame was sent with an unrecognised opCode of [{0}]
wsFrame.invalidUtf8=A WebSocket text frame was received that could not be decoded to UTF-8 because it contained invalid byte sequences
wsFrame.invalidUtf8Close=A WebSocket close frame was received with a close reason that contained invalid UTF-8 byte sequences
wsFrame.ioeTriggeredClose=An unrecoverable IOException occurred so the connection was closed
wsFrame.messageTooBig=The message was [{0}] bytes long but the MessageHandler has a limit of [{1}] bytes
wsFrame.noContinuation=A new message was started when a continuation frame was expected
wsFrame.notMasked=The client frame was not masked but all client frames must be masked
wsFrame.oneByteCloseCode=The client sent a close frame with a single byte payload which is not valid
wsFrame.partialHeaderComplete=WebSocket frame received. fin [{0}], rsv [{1}], OpCode [{2}], payload length [{3}]
wsFrame.payloadMsbInvalid=An invalid WebSocket frame was received - the most significant bit of a 64-bit payload was illegally set
wsFrame.readFailed=Async client read failed
wsFrame.sessionClosed=The client data cannot be processed because the session has already been closed
wsFrame.suspendRequested=Suspend of the message receiving has already been requested.
wsFrame.textMessageTooBig=The decoded text message was too big for the output buffer and the endpoint does not support partial messages
wsFrame.wrongRsv=The client frame set the reserved bits to [{0}] for a message with opCode [{1}] which was not supported by this endpoint
wsFrameClient.ioe=Failure while reading data sent by server
wsHandshakeRequest.invalidUri=The string [{0}] cannot be used to construct a valid URI
wsHandshakeRequest.unknownScheme=The scheme [{0}] in the request is not recognised
wsRemoteEndpoint.acquireTimeout=The current message was not fully sent within the specified timeout
wsRemoteEndpoint.changeType=When sending a fragmented message, all fragments must be of the same type
wsRemoteEndpoint.closed=Message will not be sent because the WebSocket session has been closed
wsRemoteEndpoint.closedDuringMessage=The remainder of the message will not be sent because the WebSocket session has been closed
wsRemoteEndpoint.closedOutputStream=This method may not be called as the OutputStream has been closed
wsRemoteEndpoint.closedWriter=This method may not be called as the Writer has been closed
wsRemoteEndpoint.encoderDestoryFailed=Failed to destroy the encoder of type [{0}]
wsRemoteEndpoint.encoderError=Encoding error [{0}]
wsRemoteEndpoint.flushOnCloseFailed=Batched messages still enabled after session has been closed. Unable to flush remaining batched message.
wsRemoteEndpoint.invalidEncoder=The specified encoder of type [{0}] could not be instantiated
wsRemoteEndpoint.noEncoder=No encoder specified for object of class [{0}]
wsRemoteEndpoint.nullData=Invalid null data argument
wsRemoteEndpoint.nullHandler=Invalid null handler argument
wsRemoteEndpoint.sendInterrupt=The current thread was interrupted while waiting for a blocking send to complete
wsRemoteEndpoint.tooMuchData=Ping or pong may not send more than 125 bytes
wsRemoteEndpoint.writeTimeout=Blocking write timeout
wsRemoteEndpoint.wrongState=The remote endpoint was in state [{0}] which is an invalid state for called method
wsSession.closed=The WebSocket session [{0}] has been closed and no method (apart from close()) may be called on a closed session
wsSession.created=Created WebSocket session [{0}]
wsSession.doClose=Closing WebSocket session [{0}]
wsSession.duplicateHandlerBinary=A binary message handler has already been configured
wsSession.duplicateHandlerPong=A pong message handler has already been configured
wsSession.duplicateHandlerText=A text message handler has already been configured
wsSession.flushFailOnClose=Failed to flush batched messages on session close
wsSession.instanceCreateFailed=Endpoint instance creation failed
wsSession.instanceNew=Endpoint instance registration failed
wsSession.invalidHandlerTypePong=A pong message handler must implement MessageHandler.Whole
wsSession.messageFailed=Unable to write the complete message as the WebSocket connection has been closed
wsSession.onClose.entry=Close message with reason [{0}] received for session [{1}] in state [{2}]
wsSession.removeHandlerFailed=Unable to remove the handler [{0}] as it was not registered with this session
wsSession.sendCloseFail=Failed to send close message for session [{0}] to remote endpoint
wsSession.timeout=The WebSocket session [{0}] idle timeout expired
wsSession.timeoutRead=The WebSocket session [{0}] read idle timeout expired
wsSession.timeoutWrite=The WebSocket session [{0}] write idle timeout expired
wsSession.unknownHandler=Unable to add the message handler [{0}] as it was for the unrecognised type [{1}]
wsSession.unknownHandlerType=Unable to add the message handler [{0}] as it was wrapped as the unrecognised type [{1}]
wsWebSocketContainer.asynchronousSocketChannelFail=Unable to open a connection to the server
wsWebSocketContainer.connect.entry=Connecting endpoint instance of type [{0}] to [{1}]
wsWebSocketContainer.connect.write=Writing the HTTP upgrade request from buffer starting at [{0}] with a limit of [{1}] from local address [{2}]
wsWebSocketContainer.defaultConfiguratorFail=Failed to create the default configurator
wsWebSocketContainer.failedAuthentication=Failed to handle HTTP response code [{0}]. [{1}] header was not accepted by server.
wsWebSocketContainer.httpRequestFailed=The HTTP request to initiate the WebSocket connection to [{0}] failed
wsWebSocketContainer.invalidExtensionParameters=The server responded with extension parameters the client is unable to support
wsWebSocketContainer.invalidHeader=Unable to parse HTTP header as no colon is present to delimit header name and header value in [{0}]. The header has been skipped.
wsWebSocketContainer.invalidStatus=The HTTP response from the server [{0}] did not permit the HTTP upgrade to WebSocket
wsWebSocketContainer.invalidSubProtocol=The WebSocket server returned multiple values for the Sec-WebSocket-Protocol header
wsWebSocketContainer.maxBuffer=This implementation limits the maximum size of a buffer to Integer.MAX_VALUE
wsWebSocketContainer.missingAnnotation=Cannot use POJO class [{0}] as it is not annotated with @ClientEndpoint
wsWebSocketContainer.missingAuthenticateHeader=Failed to handle HTTP response code [{0}]. Missing [{1}] header in response
wsWebSocketContainer.missingLocationHeader=Failed to handle HTTP response code [{0}]. Missing Location header in response
wsWebSocketContainer.pathNoHost=No host was specified in URI
wsWebSocketContainer.pathWrongScheme=The scheme [{0}] is not supported. The supported schemes are ws and wss
wsWebSocketContainer.proxyConnectFail=Failed to connect to the configured Proxy [{0}]. The HTTP response code was [{1}]
wsWebSocketContainer.redirectThreshold=Cyclic Location header [{0}] detected / reached max number of redirects [{1}] of max [{2}]
wsWebSocketContainer.responseFail=The HTTP upgrade to WebSocket failed but partial data may have been received: Status Code [{0}], HTTP headers [{1}]
wsWebSocketContainer.sessionCloseFail=Session with ID [{0}] did not close cleanly
wsWebSocketContainer.shutdown=The web application is stopping
wsWebSocketContainer.sslEngineFail=Unable to create SSLEngine to support SSL/TLS connections
wsWebSocketContainer.unsupportedAuthScheme=Failed to handle HTTP response code [{0}]. Unsupported Authentication scheme [{1}] returned in response